27620987b8
New files for OR1K support
2014-09-03 19:34:25 +00:00
8ce568ce88
Split some long lines.
2014-08-27 13:56:02 +00:00
6b933a652f
Test make(1) by running the maintained tests, not unmaintained
...
copies of them.
* Remove all old tests from src/tests/usr.bin/make/d_*. These tests
were unmaintained old copies of the actual tests which are maintained
under src/usr.bin/make/unit-tests. One exception is the test in
d_unmatchedvarparen.mk, which was new, but has nw been added to
src/usr.bin/make/unit-tests/varmisc.mk.
* In src/tests/usr.bin/make/Makefile, copy all
the tests from src/usr.bin/make/unit-tests to
${DESTDIR}/usr/tests/usr.bin/make/unit-tests.
* In src/tests/usr.bin/make/t_make.sh, run the tests installed above,
instead of the old tests.
* In etc/mtree/NetBSD.dist.tests, create the
usr/tests/usr.bin/make/unit-tests diectory.
* Update the set lists for all the above.
2014-08-22 16:45:32 +00:00
1ab7f387c3
Add eabihf directories
2014-08-10 23:31:41 +00:00
f14316bcbc
Update build glue for LLVM/Clang 3.6svn r215315. Changes include various
...
performance improvements across all backends and a much improved PPC32
backend.
2014-08-10 17:32:54 +00:00
547b3a3b01
Changes to existing files to enable building AARCH64 userland.
...
evbarm64-el
This is clang only. While gcc4.8 supports aarch64, no netbsd support has
been written for aarch64 with gcc4.8.
2014-08-10 05:56:36 +00:00
beb9c6d1b5
Preliminary files for AARCH64 (64-bit ARM) support.
...
Enough for a distribution build.
2014-08-10 05:47:35 +00:00
9e8101899d
To make pax use ${TOOL_GZIP}, we need to pass "--use-compress-program
...
${TOOL_GZIP}" on the command line, and refrain from passing "-z". If
passed "-z", pax will use plain "gzip", ignoring --use-compress-program.
2014-08-06 11:41:18 +00:00
5a18c2965e
Introduce and use GZIP_FLAGS variable, to fix a quoting error
...
in the way we tried to use GZIP="-9 ${GZIP_N_FLAG}".
For consistency, also use GZIP_FLAGS elesehere in this file.
2014-08-06 10:37:30 +00:00
10683121fc
Add a directory for sysinst language files
2014-08-05 18:45:35 +00:00
f78c710fb2
Pass GZIP="-9 ${GZIP_N_FLAG}" instead of GZIP=-9n
...
in the environmentto commands that invoke ${TOOL_GZIP}.
This will allow them to use -nT instead of just -n with pigz.
2014-08-05 15:43:50 +00:00
71da667fc9
Use ${TOOL_GZIP_N} instead of ${TOOL_GZIP} -n, and similarly
...
use ${TOOL_GZIP_N} -9 instead of ${TOOL_GZIP} -9n, etc.
This will pass -nT instead of just -n if the gzip program is
actually pigz.
2014-08-05 15:40:58 +00:00
0b2a19e1a1
Remove "tags=nodiff" from /var/log/authlog as suggested by uebayasi@;
...
part of PR 49031.
2014-08-05 07:34:52 +00:00
a2fb9dacaf
BUILDINFO part 3: Add BUILDINFO to RELEASEVARS and /etc/release
...
The BUILDINFO string will appear nearthe top of /etc/release,
indented by 8 spaces and with a blank line above and below it,
but without a heading. The BUILDINFO string is expected to
be self-explanatory.
Also change some other headings near the top of /etc/release.
2014-08-03 09:19:34 +00:00
8a948b4343
In the background subshell that flushes partial output every few
...
seconds, detach from the controlling terminal. Without this, pressing
control-T (to send SIGINFO from the terminal) would almost always result
in the sleep process printing "about N seconds left of the original 3",
which is useless information.
2014-07-29 20:39:16 +00:00
7bc384757f
In rc.subr, add _have_rc_postprocessor function and use it instead of
...
inline tests like [ -n "${_rc_postprocessor_fd}" ]. The new function
performs a few new tests, including verifying that /etc/rc is still
running (using a new _rc_pid variable set by /etc/rc).
This is intended to deal with the case that a script run from /etc/rc
spawns a background process, then /etc/rc exits, but the background
process still has environment variables inherited from /etc/rc.
Fixes PR 46546.
2014-07-27 07:46:46 +00:00
3515fb1d7c
Initial commit of support for Kobo touch. (i.MX507 or i.MX508)
...
(http://www.kobo.com )
2014-07-25 11:22:50 +00:00
7f6fa64667
'file system' for consistency with documentation (instead of 'filesystem').
2014-07-22 17:11:09 +00:00
ff8e33c9e6
since we support 601 hardware now, let's build the kernel for it as well
2014-07-20 14:52:29 +00:00
4ab4902eb2
lua: updated from 5.1 to 5.3 work3
...
* lua(1):
- changed lua_Integer to intmax_t
- updated distrib/sets/lists and etc/mtree
- updated bsd.lua.mk
- fixed bozohttpd (lua-bozo.c)
- compatibilized bindings: gpio, sqlite
* lua(4):
- removed floating-point and libc dependencies using '#ifndef _KERNEL'
- fixed division by zero and exponentiation
- libkern: added isalnum(), iscntrl(), isgraph(), isprint() and ispunct()
- acpica: removed isprint() from acnetbsd.h
- libc: moved strcspn.c, strpbrk.c and strspn.c to common
- removed stub headers
- compatibilized bindings: luapmf, luasystm
* reorganized luaconf.h
* updated doc/CHANGES and doc/RESPONSIBLE
2014-07-19 18:38:33 +00:00
652bd7d1b3
Create the dhcpd.leases file if it doesn't exist already, don't just
...
warn about it not being there.
Closes PR misc/48868
2014-07-17 07:17:03 +00:00
e119d14fc9
Consistency changes only. Start sentences with a capital letter and end
...
them with a full stop.
2014-07-14 12:29:48 +00:00
916085404d
Make named and the rest of BIND seed their RNG from /dev/urandom, not /dev/random. Better would be to rip the enormous gonkulating RNG machinery out of libisc entirely. Later.
2014-07-13 22:06:56 +00:00
46ee6da10e
create /etc/rndc.key on start if it doesn't already exist
2014-07-08 07:04:07 +00:00
5e7854467d
Update the distrib-dirs mtree specification for the new /usr/share/doc
...
layout.
2014-07-05 19:23:56 +00:00
de6fa99741
Update root.cache to 2014060201.
...
Now B.ROOT-SERVERS.NET and C.ROOT-SERVERS.NET has an AAAA record.
2014-07-01 03:33:28 +00:00
e281e658e4
Add new net/t_bpfjit test.
2014-06-30 21:32:59 +00:00
59ac30731b
Undo the mac68k specific previous change and instead move all mkisofs-based
...
images into ${RELEASEDIR}/images (just like the makefs ones).
2014-06-30 15:34:57 +00:00
cc489da3c3
Make sure the iso target directory is created in-time for the mkisofs
...
invocation
2014-06-29 17:49:04 +00:00
d768eb27cb
Print BUILDID near the top of /etc/release.
2014-06-14 12:26:26 +00:00
cf026aea41
add one more directory.
2014-05-31 14:36:53 +00:00
6162057ac7
add new directory
2014-05-31 14:31:01 +00:00
582f22c9fc
Tag all 0600 files as "nodiff" (== secret).
2014-05-19 05:43:35 +00:00
9ce5f7726e
Add a test case for PR kern/48787.
2014-05-10 14:15:25 +00:00
c72d415969
Use the new -U option for config to avoid generating kernel debug info
...
during release builds. This should save quite some space in the evbarm
build, where makeoptions DEBUG is heavily used.
2014-05-05 19:10:00 +00:00
a270487d77
Indent.
2014-04-29 09:58:18 +00:00
4f67388957
Refactor a little to remove huge indents.
2014-04-29 09:56:16 +00:00
0db0bb3da5
Split huge monolithic functions for readability.
2014-04-29 09:42:51 +00:00
413d532bcc
Minimal execve(2) ATF test.
2014-04-29 06:29:02 +00:00
288496e5c0
Send a "nop" metadata message to the postprocessor every few seconds,
...
to flush partial output lines. This should help with PR 48714.
2014-04-09 12:45:05 +00:00
11bfaf8d26
Add comments about the intended use of each type of metadata message.
2014-04-09 12:38:09 +00:00
cf10990721
Allow the extra command "reload" to dhcpcd's rc script, letting it reload
...
its configuration and rebind directly via the script.
LGTM roy@
2014-04-06 17:13:57 +00:00
29b3420ba5
Drop sci0 from "floppy" case too.
2014-04-01 01:10:14 +00:00
bd0f2dba11
Landisk has no sci0.
2014-03-31 20:24:09 +00:00
aad6ef8bb5
Bring back the playstation2 port - now that a toolchain for it is
...
available again.
2014-03-31 11:25:47 +00:00
880ecf60c1
Update list of kernels
2014-03-30 16:00:48 +00:00
1339b2cc13
Add MKCTF
...
This variable separates CTF stuffs from MKDTRACE; we can build DTrace
solely without building and using them. This allows us to use DTrace
even if CTF stuffs have problems (actually they have now).
This variable would be merged into MKDTRACE eventually, once CTF stuffs
work correctly again.
2014-03-25 09:52:55 +00:00
ac142a8081
merge freetype 2.5.3.
2014-03-20 08:57:48 +00:00
6cb10275d0
Merge riastradh-drm2 to HEAD.
2014-03-18 18:20:35 +00:00
c23d29ea55
updates for libX11 1.6.2, dri3proto and presentproto, and fix
...
the libXrender build.
2014-03-16 23:25:15 +00:00
0ad077175a
Add some states not handled before. XXX: are both states in the | cases
...
possible?
2014-03-13 00:50:55 +00:00
f91425b631
turn off kernels that don't exist yet.
2014-03-10 00:50:12 +00:00
cf5baf63ad
modified NetWalker kernel config
...
* add ARM_HAS_VBAR, FPU_VFP etc.
2014-03-07 12:35:14 +00:00
58e1ec0404
Add MKCOMPAT glue for powerpc64
2014-03-07 04:18:06 +00:00
4e82be1a79
Add BE version of cubieboard. Plus hf too. And hf for BCM5301X.
2014-03-01 01:51:01 +00:00
5ad571664b
There are no powerpc64 in evbppc currently.
2014-02-28 06:10:54 +00:00
6d3ceb1d61
Rename NetBSD/hp700 to NetBSD/hppa.
...
Unfortunately our VCS isn't very helpful here.
2014-02-24 07:23:38 +00:00
dc7b86517b
Adjust directories for atf 0.19 import.
2014-02-08 19:45:51 +00:00
a452d8c9e2
Pass the -n flag to gzip invocations.
...
This prevents it from embedding a timestamp in the output. We pass
"-n" unconditionally, not conditional on MKREPRO, because many other
invocations of gzip already passed the -n flag unconditionally.
2014-01-27 21:37:17 +00:00
36ef98548b
Use ${TOOL_GZIP} instead of just gzip in all Makefiles
...
outside */dist/* subdirectories.
When USE_PIGZGZIP=yes, bsd.own.mk sets TOOL_GZIP=${TOOL_PIGZ},
so there's no need to test USE_PIGZGZIP in these Makefiles.
2014-01-27 08:18:07 +00:00
66d774c5de
Add BUILDSEED to RELEASEVARS.
2014-01-26 17:33:53 +00:00
0c9e596c4b
Add MKREPRO and MKARZERO to the list of variables in RELEASEVARS.
2014-01-26 16:53:00 +00:00
69dbea1fd5
Add raid disk nodes for the install images
2014-01-24 23:59:12 +00:00
8797028bc7
- make etc/rc.d/wpa_supplicant create directory /var/run/wpa_supplicant
...
on startup
- create share/examples/wpa_supplicant/wpa_supplicant.conf and make it
known in the relevant places. Improvements welcome, my point was
ctrl_interface and "you seriously want this"
2014-01-23 07:26:50 +00:00
65bc7e4f84
Create a bpf(4) device node on ramdisk for DHCP client.
2014-01-22 11:46:31 +00:00
2b043c75b6
eliminate use of bsd.sys.mk from Makefiles
2014-01-16 01:15:32 +00:00
363ab82ea5
Backout previous, now that the makefile glitch causing population of
...
the tests/opencrypto directory has been fixed
2014-01-15 10:21:08 +00:00
6d31d85c48
Add usr/tests/opencrypto
2014-01-15 08:21:44 +00:00
83ebdf3067
Create new directory for the opencrypto tests
2014-01-14 18:07:20 +00:00
28b7823068
Don't try to use server-specific "restrict" settings;
...
they do not work when the server is specified by domain name
and the name is associated with multiple IP addresses.
This also means that uncommenting "restrict default ignore"
will not work, so remove the comments suggesting that.
Also edit some other comments.
2014-01-14 13:23:46 +00:00
26125ae798
Add some minimal tests of vmstat(1), to serve as regression tests
...
for PR bin/44518.
2014-01-07 16:47:13 +00:00
97dd2db015
Another comment change, missed in previous commit.
2014-01-06 11:26:06 +00:00
d337f0a2a1
Attempt to improve comments about how to choose servers,
...
and about what "tos minsane" does.
2014-01-06 11:25:03 +00:00
dcb8a94c15
Add several "restrict" lines to the default ntp.conf, with comments.
2014-01-06 11:21:34 +00:00
6d322f2f45
Update LLVM family to 3.5svn r198450. Interesting changes include:
...
- Improvements in the SPARC64 support
- ARM backend can almost build a full NetBSD/EABI system with the
integrated assembler
- PowerPC grows disassembler support
- LLD supports copy relocation, beginning of MIPS backend
- New diagnostic for use of bool expression as size_t argument for
strncmp and friends
2014-01-05 16:38:05 +00:00
270d83b8cd
put a comment for mode7
2013-12-28 03:18:39 +00:00
a5d67b01f7
Remove empty directory /usr/share/zoneinfo/Mideast.
...
The files that used to be in this directory were removed in tzdata2013i.
2013-12-26 20:14:38 +00:00
18caf3b85f
Fix _crunch entries, which accidentally got changed from compression
...
operations to decompression operations nearly two years ago. They are
used only by catman(8), which we don't run any more, but they ought to
be correct anyway.
2013-12-22 01:18:28 +00:00
eabaad824f
Add a /var/shm directory (to be used for shm_open and friends)
2013-12-01 09:13:54 +00:00
bb95642efb
+ /usr/include/c++/experimental
2013-11-28 14:19:18 +00:00
4741720ca9
Replace the comment on this file. It appears to date back to CSRG days
...
and in particular was clearly last edited before nsswitch.conf existed.
2013-11-24 07:20:01 +00:00
acaf72ec02
Introduce a variable for security.conf, default empty, to list users
...
whose home is (allowed to be) owned by another user.
It's a separate variable and not just check_passwd_permit_dups so I can
make security shut up about my uucp users.
Fixes the second half of PR misc/36063
2013-11-06 19:37:05 +00:00
0d7af235a1
having more than one line with the same group name and gid is not only
...
allowed, it's even recommended for groups with lots of members, so
do not warn about duplicate group name lines if the gid is the same
2013-11-06 19:30:20 +00:00
f50856c5c4
add g++ subdirs for GCC 4.8.
2013-11-06 00:53:03 +00:00
44f40b000e
HOST_SH is defined in bsd.sys.mk, so we need to include that
...
as well as bsd.own.mk. Revert previous use of ${HOST_SH:Ush}.
2013-11-01 11:09:05 +00:00
5df913ae6f
If HOST_SH is not defined, use sh to parse osrelease.sh
2013-11-01 10:00:51 +00:00
f644e87962
Reinstate .include <bsd.own.mk>. Without this, many variables are undefined.
...
Define DISTRIBVER in the same way that src/etc/Makefile defines it.
Without this, "make params" in src/Makefile uses an undefined value.
Remove a spurious ">&3".
2013-11-01 06:22:24 +00:00
b56cbda8ef
Instead of stupid postprocessor tricks, use redirect tricks
...
to ensure that the output from ${PRINT_PARAMS} contains only
the desired information without any debugging noise.
2013-10-30 15:15:12 +00:00
fc332e835a
add ./usr/include/gcc-4.8 directory to the build.
2013-10-30 02:22:51 +00:00
7f3fe544bc
create a lua device node for lua(4) and luactl(8)
2013-10-28 18:33:20 +00:00
8f1abb570c
add 3l/3lua and 9l/9lua man page sections
2013-10-25 08:19:46 +00:00
c7d5cf1a03
define a place for Lua man pages
2013-10-25 08:15:14 +00:00
2261aa416c
_build rule for man pages with a .<number><letters> extension (.3tcl, .3am, .3lua, etc.)
2013-10-25 07:59:55 +00:00
680050e3fa
add new g++ directories
2013-10-24 19:06:01 +00:00
cb0e0b6aaa
add missing chroot directories for rtadvd
2013-10-19 22:35:02 +00:00
9329703b07
Add HAVE_LLVM/HAVE_PCC, MKLLVM/MKPCC to RELEASEVARS.
2013-10-18 11:42:59 +00:00
a5548de651
silence is golden
2013-10-16 14:50:43 +00:00
b147a05074
Add sysmon (required for the envsys framework).
2013-10-15 19:22:42 +00:00
8f0c389494
wait until our local address is available before configuring.
2013-09-12 19:52:50 +00:00
a50628ca37
Add CUBIEBOARD
2013-09-08 16:34:06 +00:00
dc76b0b003
Add defaults for pkg_info and pkg_admin variables in case pkgpath.conf
...
is not installed.
2013-09-08 08:19:40 +00:00
31b8d2c593
Re-add "/usr/include/gcc-4.1". It is only obsolete on ports that use
...
GCC 4.5.x. Explanation provided by Thomas Klausner in private e-mail.
2013-08-22 07:14:38 +00:00
fcf7754532
Remove more obsolete directories:
...
- /usr/include/gcc-4.1
- /usr/share/locale/no_NO.ISO8859-1
- /usr/share/locale/no_NO.ISO8859-1/LC_MESSAGES
2013-08-21 20:52:45 +00:00
c46a162a28
Remove obsolete directories "/usr/share/locale/no_NO.ISO8859-15" and
...
"/usr/share/locale/no_NO.ISO8859-15/LC_MESSAGES".
2013-08-21 20:22:35 +00:00
3c46e5578f
if softfloat, Install a ld.so.conf to use libc_vfp.so if there is a VFP on
...
evbarm (no other arm ports a CPU supporting VFP).
2013-08-19 16:34:29 +00:00
fbfe999cbc
Instead of trying to pass two kernels to beagleboard.conf, pass one and
...
derive the path to the second from the first.
2013-08-19 04:27:22 +00:00
0b185da1b6
Try to pick up the right location for BEAGLEBONE and BEAGLEBOARD kernels.
2013-08-17 13:08:16 +00:00
d1c1419eb8
Provide UTF-8 variants for all existing locales. The data is derived
...
from the Unicode Common Locale Data Repository.
Convert non-UTF-8 versions from the UTF-8 version using iconv and some
ad-hoc transliterations using sed.
Use EUR as currency_symbol in ISO8859-1.
Invert the Norwegian handling. no_NO is an alias for nb_NO as the latter
is used e.g. in CLDR.
Provide the Serbian locales in both Cyrilic and Latin script versions.
The alias is choosen based on the character set for the non-UTF-8 case
and Cyrillic is the default for UTF-8.
2013-08-11 22:09:40 +00:00
2f193ecc6c
more dark ATF rituals are required
2013-08-11 03:53:12 +00:00
8bf9d972aa
fix another typo
2013-08-07 20:57:22 +00:00
5878e8510d
Fix a typo
2013-08-07 06:09:32 +00:00
103be4d547
Need to separate BE MACHINE_ARCH so that armv7 can be excluded.
2013-08-06 17:53:55 +00:00
7732e16eb9
Simply and deal with all the various earm MACHINE_ARCH variants
2013-08-06 05:57:37 +00:00
57d8a38cf6
Some UMTS/LTE USB modems have as many as five tty instances and the
...
useful ones that understand AT commands tend to be enumerated last,
so bump up the default number of ttyU device nodes.
2013-08-03 16:07:35 +00:00
ff6f2bd928
Add a couple of basic IP/MPLS forwarding tests
2013-07-19 04:00:40 +00:00
c9855651f8
Add stub port for evbcf which has enough to do a distribution build.
2013-07-18 22:08:59 +00:00
8fd4793004
PR/48061: NAKAJIMA Yoshihiro: wrong description about bzip2's suffix
2013-07-18 13:10:50 +00:00
d87d6793f0
Add _rtadvd user and group.
...
Add a chroot dir for the _rtadvd user.
Drop privs to the user _rtadvd after acquiring our socket.
When rc.d/rtadvd starts or reloads, the rtadvd config file is copied
into the chroot before starting or reloading rtadvd itself.
Create a symlink from /var/run/rtadvd.dump to the chroot
Inital idea from OpenBSD patch rtadvd.c r1.36
2013-07-09 09:34:58 +00:00
e3bb11dade
Add a hack to fix the dhcpcd rc.d script to work with a single
...
interface specified in dhcpcd_flags in rc.conf(5).
Fixes PR bin/43490
2013-06-25 13:02:53 +00:00
a78ff5d27c
Use TOOL_GZIP in mkimage, and pass the TOOL_GZIP into it.
2013-06-16 13:47:42 +00:00
aa3896734e
if ipsec_flags is given, treat it as an interface name and change @LOCAL_ADDR@
...
to the IP address for it. This makes dynamic addresses work during autoconf.
Also while here in restart, re-use start and stop instead of duplicating them.
2013-06-14 16:37:55 +00:00
0fe53d7fc9
remove xorg directories now marked obsolete.
2013-06-10 05:09:34 +00:00
d08fd20449
fix narn-names -> mollari
...
add ecdsa keys (in many cases, pre-emptive strikes)
2013-06-07 16:44:17 +00:00
542b174b57
Move _gpio gid below 100 per mrg's request.
2013-06-07 06:35:11 +00:00
7dfe13f608
Update for Clang 3.4.
2013-05-28 19:10:16 +00:00
199f668519
Rename the 'gpio' group to '_gpio' as new group names should start with an
...
underscore. While here, fix the awk script to properly expand such group
names.
2013-05-20 11:37:02 +00:00
d84ba6e3bc
Add a group 'gpio' and create gpio(4) device nodes under /dev with
...
mode 664 and group ownership set to 'gpio'. This allows controlled access
to specifically enabled gpio pins to members of the gpio group. See
gpioctl(8), and, gpio(4) for details.
2013-05-19 16:09:04 +00:00
8782935dec
try to sync lists of rc.d scripts
2013-05-16 07:37:05 +00:00
48ffade9e8
Add an entry for scif0 serial.
2013-05-08 15:14:27 +00:00
829ceb66b9
Make sure to create serial device nodes (scif0 and sci0).
2013-05-08 14:59:41 +00:00
a3a6189341
Fix typo in previous
2013-05-01 15:57:44 +00:00
d7199a4b01
Install pkgpath.conf in /etc - part of fix for misc PR/47645
2013-05-01 15:55:53 +00:00
4aba7d3a0d
Support to build for epoc32 userland.
2013-05-01 13:11:59 +00:00
1410cf30c2
Fix for problematic paths in /etc/daily and /etc/security reported in
...
PR/47645.
Add a separate file which contains the paths for the pkg_admin and
pkg_info utilities. This is called /etc/pkgpath.conf (to distinguish it
from pkg.conf).
Thanks also to Edgar Fuss for the sanity check.
2013-05-01 05:36:25 +00:00
8ac2e441e7
Add sample code to suppress copyright message on interactive logins.
2013-04-30 21:03:43 +00:00
fb2f15afec
Fix yet another "openpty() failed" error during sysinst.
...
Prepare a new entry for ramdisk that includes ipty target in
etc.hp300/MAKEDEV.conf and use it in distrib/hp300/ramdisk/Makefile.
See also PR/46812, PR/47123, and PR/47774.
We could simply add "ipty" to MAKEDEVTARGETS as miniroot/Makefile does,
but it's better to shrink ramdisk size as much as possible.
Should be pulled up to both netbsd-6 and netbsd-6-0.
2013-04-28 08:08:03 +00:00
ecb06a3b09
Add build glue for libc++.
2013-04-27 23:02:17 +00:00
12dfab37e0
Add MKCOMPAT support for earm
2013-04-27 07:59:09 +00:00
9f57c06d41
- read the root keys from our file
...
- explain what happens if we get clock skew
2013-04-25 20:28:05 +00:00
2bc201008f
Provide the root keys for dnssec and advise on how to make this work.
...
XXX: pullup-6
2013-04-25 17:02:29 +00:00
261f2631c7
Add powerd=YES in default. It's recommended for a power switch on x68k.
2013-04-21 08:47:28 +00:00
a33513dc62
don't attempt to create interfaces that exist and don't hide errors.
2013-04-20 18:24:18 +00:00
cb2a012804
Add spiflash device to MAKEDEV template and MAKEDEV config on evbarm.
...
Obtained from Marvell, Semihalf.
2013-04-20 11:41:51 +00:00
5441b5c8c7
Match all the arm machines to get the majors.arm32 file
2013-04-14 13:47:37 +00:00
79d4c5e554
Find the right majors files for earm*
2013-04-12 12:30:18 +00:00
e290c24aa3
Add a makedisk_p12high, used by VAX now after unbumping MAXPARTITIONS from
...
16 down to 12.
2013-04-11 19:13:46 +00:00
0321fc22c0
add event2
2013-04-11 17:51:04 +00:00
434b2461fb
Don't print warning even if mkisofs is not found.
2013-04-06 13:00:31 +00:00
3357f1920b
It helps being able to read - move if_athn entry to the proper directory
2013-03-30 18:14:50 +00:00
a809000618
Add if_athn firmware directory
2013-03-30 17:31:54 +00:00
6d5c5ede57
create audio devices
2013-03-24 14:03:54 +00:00
aa6ebcd0e2
Add KUROBOX_PRO as an EVBARM_BOARDS member.
2013-03-23 11:51:47 +00:00
1386c00816
new test directories
2013-03-21 19:17:51 +00:00
bbce2f06df
PR/47678: Dr. Wolfgang Stukenbrock: remove local iscsi entry which conflicted
...
with the iana assigned one. This port has been assigned to iscsi-target.
2013-03-21 17:45:03 +00:00
77e3515ae2
fix ALL_KERNELS handling
2013-03-21 15:16:43 +00:00
4daade7385
Add a new installer image for Raspberry PI to evbarm
...
Includes the following major changes:
1) Add new configmenu item to sysinst to allow creation of users at
post-install time.
2) Add an sshramdisk type to evbarm, which is a ramdisk with sshd
enabled, allowing users to install on a headless PI by sshing to the
device with the account "sysinst" password "netbsd" to begin the
installation. (Note, neither the account, nor the ssh setup are copied to
the finalized installation image)
3) Change mkimage to build a boot-only image, without the root filesystems.
Much of the sshramdisk code could be reused on other ports easily.
2013-03-19 22:16:52 +00:00
b36c60d9c0
Handle ALL_KERNELS selection
2013-03-17 12:19:57 +00:00
801939b819
fix typo
2013-03-12 20:22:00 +00:00
36d75e6825
new directories for compat npf
2013-03-12 20:01:55 +00:00
7026897f2b
fix typo, from Henning Petersen
2013-03-11 23:17:34 +00:00
c9f0cc4510
mv npf modules to /lib
2013-03-10 21:40:05 +00:00
055af6fa83
Record the value of MKATF and MKKYUA in /etc/release.
2013-03-09 14:12:08 +00:00
774aa66633
add missing $, from Petar Bogdanovic
2013-03-08 14:32:12 +00:00
b50b975dbc
PR/47630: Petar Bogdanovic: add ssh_host_ecdsa_key to /etc/mtree/special
2013-03-08 14:31:28 +00:00
12a7d7c6ad
create /dev/vchiq
2013-03-08 12:33:25 +00:00
e240adbd0b
Retire OSI network stack. OK core@
2013-03-01 18:25:13 +00:00
5e078c9e58
missing comment
2013-02-28 03:04:12 +00:00
ef9b0fbc8a
node for dtrace
2013-02-28 02:00:27 +00:00
48b2f2c970
Add new directories for kyua-atf-compat.
2013-02-25 00:31:51 +00:00
47840f72d0
Install a kyua.conf file that sets unprivileged_user to _tests.
2013-02-24 03:06:13 +00:00
edcb14a44e
Install kyua-testers' distribution documents.
2013-02-23 14:58:11 +00:00
89e4f17129
Register directories and files provided by kyua-cli.
2013-02-23 14:18:36 +00:00
af236c8c4f
refresh from IANA
2013-02-22 03:42:06 +00:00
93170f635e
Use HOST_SH to run scripts. Makes mkimage work on SunOS.
2013-02-21 15:13:10 +00:00
178a6ef2ca
Move INTEGRATOR_CP from EVBARM_BOARDS to KERNEL_SETS so an
...
INTEGRATOR_CP_INSTALL kernel isn't required.
2013-02-20 09:03:41 +00:00
5c97965224
Add support for the ARM Integrator/CP from Sergio López.
...
The code hasn't been tested on real hardware, but INTEGRATOR_CP config
is useful for QEMU which supports it.
2013-02-19 10:57:09 +00:00
dbf5b53da3
Enable the build of kyua-testers and register its files and directories.
...
This is conditional on MKKYUA.
2013-02-19 06:06:39 +00:00
7d3a48f1d2
Hook Lutok into the build. This is all protected by the MKKYUA guard.
2013-02-16 21:40:05 +00:00
8f212f1945
Move tests for examples from tests/examples to tests/share/examples.
...
This is to match the layout of the installed and source files more closely.
While doing this, honor the MKSHARE variable, as the files these tests
validate are only installed when MKSHARE=yes.
2013-02-16 12:44:25 +00:00
87aeb26f19
Avoid //
2013-02-13 04:22:36 +00:00
73e86066b1
fix output filename for __mkimage macro
2013-02-10 22:03:49 +00:00
85a061f852
fix rpi kernel path, defer image building until after release target is done
2013-02-10 21:36:31 +00:00
fd70e2e194
avoid dup kernel
2013-02-10 20:25:56 +00:00
6975538bda
add beagleboard
2013-02-10 16:40:21 +00:00
84874dc42c
always use ${MKNOD} for consistency
2013-02-10 14:54:33 +00:00
158210c439
pass more tools down.
2013-02-10 14:26:32 +00:00
96add05603
Follow a different approach to install the kernel and compress the image.
2013-02-10 01:24:40 +00:00
f73dde4fda
get the kernel from the release directory.
2013-02-09 20:47:06 +00:00
02bfcabc8d
merge back changes I undid
2013-02-09 18:59:19 +00:00
8070b25e81
hook image building for rpi.
2013-02-09 18:49:55 +00:00
df473aee24
PR/47540: Felix Deichmann: DSA keys can only be 1024 bits.
2013-02-07 19:32:19 +00:00
6c17c16f94
build the armv5t, armv6 and armv7 kernels for earm but only the v6 and v7
...
for earmhf.
2013-02-06 01:31:55 +00:00
4c0c51981c
Only include debug set obsolete set if MKDEBUG is not no
2013-02-05 16:39:26 +00:00
2947c6f2d5
Add earmhf support
2013-02-05 07:34:07 +00:00
ea2a4e9bad
Add debug to the list of OBSOLETE_FILES
2013-02-05 07:32:44 +00:00
b1d97a6429
Make custom "reload" target work. Before this fix it would have tried
...
to send a HUP signal to "wpa_supplicant" instead.
2013-02-01 13:29:33 +00:00
80695a814b
spwd.db should be 0600 (Brooks Davis)
2013-01-29 20:21:02 +00:00
162b6b9919
The console major number is not always 0; when creating a temporary
...
console while populating a memory disk, use %CONSOLE_CMAJOR% instead
of 0, and let MAKEDEV.awk substitute the appropriate machine-dependent
major number.
This fixes a bug that I introduced in revision 1.82 dated 2007-03-11.
2013-01-26 18:44:21 +00:00
fa9d9d71df
Update LLVM/Clang snapshot to r172366. Catch up with the move past 3.2
...
release.
2013-01-23 15:02:52 +00:00
e6e5cc51b8
Support a release build restricted to ALL_KERNELS. This file was missed
...
by the first commit.
2013-01-14 20:05:42 +00:00
bf86f39b04
Add an entry for wscons ttyE0.
2013-01-14 09:23:45 +00:00
a91aefab1f
Tweak ramdisk devices.
...
- create sd2 and sd3 for external SCSI disks on LUNA-II
- ipty (2 ptys) is enough for sysinst rather than opty (16 ptys)
2013-01-14 09:15:57 +00:00
281a5e1fdb
Add ppp=YES variable. Currently pppd(8) starts automatically if ppp_peers
...
is not empty. Adding a ppp variable allows the default peer to be set,
and ppp set to NO so that dialing can happen with /etc/rc.d/ppp onestart.
Default set to YES so that old behaviour is preserved.
http://mail-index.netbsd.org/tech-userlevel/2012/08/21/msg006656.html
2013-01-13 18:47:57 +00:00
9dc19ed03b
Nix `-b 1024' from ssh_keygen_flags in /etc/defaults/rc.conf.
...
No objections on tech-security:
http://mail-index.NetBSD.org/tech-security/2012/09/03/msg000548.html
The security of generating keys at boot remains questionable, but
this change makes that no worse.
2013-01-11 04:32:41 +00:00
5c014ba1cf
Create a plcom0 device node for RaspberryPI
2013-01-10 13:38:37 +00:00
43eb4b820e
D.ROOT-SERVERS.NET changes IPv4 address.
2013-01-08 11:15:49 +00:00
191ca062bf
add a sync to make it less likely to boot with /etc pointing to nothing after
...
a crash.
2012-12-31 23:21:27 +00:00
7c8b13934d
better messages, more quoting.
2012-12-29 22:15:07 +00:00
93a9300055
add entries built for MKDEBUG and MKDEBUGLIB to the set lists
...
Thanks to Hisashi T Fujinaka <htodd@twofifty.com> for pointing out the gap.
2012-12-18 22:45:12 +00:00
448aa50d4c
Reinstate the dirname invocations that were recently removed from
...
rc.d/random_seed. The new dirname shell function provided by rc.subr
will be used, so it should work before the /usr file system is mounted.
This should fix a problem in which the fs_safe shell function failed when
passed the name of a file that did not exist.
2012-12-17 18:20:50 +00:00
532fa0d9ae
Add shell implementations of basename and dirname to rc.subr. They
...
are supposed to mimic basename(1) and dirname(1), except that they
are usable before /usr/bin is mounted.
2012-12-17 18:17:27 +00:00
c755e023f2
Avoid using programs from /usr/bin. This should fix PR 47326.
...
- no need for "dirname", because "df -G" can take a file name directly.
- replace use of "awk" with a shell while read loop.
- replace use of "stat -s" with "ls -ldn".
- no need for "tail" now that the use of "stat" has changed.
While here, also add some shell quotes and improve the grammar in a comment.
2012-12-14 18:42:25 +00:00
0450412e67
Revert previous.
...
At the least, it was committed with the wrong commit message.
2012-12-13 21:51:52 +00:00
8c91938135
Add a pidfile and the reload command.
2012-12-13 15:51:17 +00:00
0d6a8650f8
Make the compat libs of npf extension shared libraries go to the
...
compat directories instead of overwriting the arch native libs.
Also, make sure the compat directories get created. Tested on amd64.
2012-12-09 22:06:21 +00:00
4d6ed13889
Make sure that ntpd creates a pid file for the rc machinery to work.
...
http://mail-index.netbsd.org/current-users/2012/11/19/msg021518.html
2012-12-04 16:38:40 +00:00
3e31590ff0
Add src/etc/Makefile.params, containing the definition of the
...
RELEASEVARS variable, and commands related to printing the values of
the variables whose names are in RELEASEVARS.
Add an awk script to remove noise printed by "make -j" or high levels
of MAKEVERBOSE, so we get only the variables names and values. The
values are escaped so that variables containing embedded newlines,
quotation marks, and backslashes, are passed through safely.
Adapt src/etc/Makefile and src/Makefile to use the new ${PRINT_PARAMS}
command defined in src/etc/Makefile.params.
Now ${DESTDIR}/etc/release and the params file in the top-level
.OBJDIR should never contain unwanted noise, even after a build with
MAKEVERBOSE=4.
2012-12-03 13:53:28 +00:00
a23dfbdc09
Adjust for usr/tests/lib/libc/c063 debug entries.
2012-11-23 08:36:47 +00:00
7feb2e8135
Also give install a place to put the atf tests for netpgpverify
2012-11-20 15:41:43 +00:00
7e4aef559e
Fix the build - give install a place to put verify.h !
2012-11-20 15:02:44 +00:00
a76c1cc17f
Add most system calls for POSIX extended API set, part 2, with test cases:
...
faccessat(2), fchmodat(2), fchownat(2), fstatat(2), mkdirat(2), mkfifoat(2),
mknodat(2), linkat(2), readlinkat(2), symlinkat(2), renameat(2), unlinkat(2),
utimensat(2), openat(2).
Also implement O_SEARCH for openat(2)
Still missing:
- some flags for openat(2)
- fexecve(2) implementation
2012-11-18 17:41:51 +00:00
00ed5c3931
We don't need to include <bsd.prog.mk> to install a few config files
...
just <bsd.files.mk> and <bsd.links.mk> is enough.
Noticed because <bsd.prog.mk> sets LINKSMODE to BINMODE and that does
the wrong thing at least for unprivileged builds.
2012-11-17 23:08:38 +00:00
a02a44ee48
Adjust for tests/lib/{libbpfjit,libsljit} debug entries.
2012-11-12 09:03:52 +00:00
062bf78a84
Build libbpfjit test to the build.
2012-11-11 17:41:31 +00:00
5f5f1a05cc
Cause /etc/rc.d/random_seed to be the first script to run
...
after mountcritlocal. Everything else that runs after
mountcritlocal depends directly or indirectly on bootconf, so
making random_seed run before bootconf has the desired result.
2012-11-10 15:10:22 +00:00
e36b9f4a97
Make /etc/rc.d/ttys run after /etc/rc.d/bootconf.sh,
...
because bootconf could conceivably change /etc/ttys.
2012-11-10 15:08:36 +00:00
ffd8736098
Build sljit test when MKSLJIT != no and set MKSLJIT to yes on amd64 and i386.
2012-11-05 00:57:39 +00:00
acfd2b168d
motd needs to be re-generated when DISTRIBVER changes, so change he
...
Makefile to use the new ${_NETBSD_VERSION_DEPENDS} mechanism defined in
bsd.own.mk.
Rename the default motd file in the source tree from "motd" to
"motd.default", because otherwise it would conflict with the motd file
that is now created in the .OBJDIR.
2012-11-04 11:09:14 +00:00
040e0f875d
Add DISTRIBVER to the list of variables under RELEASEVARS.
2012-11-04 11:04:10 +00:00
a015b2b8c4
print something before sleeping so that a user like me can see
...
what the mysterious pause is.
2012-11-02 08:36:13 +00:00
578c31536d
catch up with npfctl moving to /sbin.
...
untested, but i guess so was the move itself ;)
2012-11-01 06:06:14 +00:00
410421ee21
Avoid using glob patterns that might match enough files to give
...
"Arg list too long" errors. Change the "find" command to use
"-exec ... +" instead of "-exec ... \;" to make it more efficient.
2012-10-24 21:23:55 +00:00
d5c3f2d0b1
Add the next three /dev/pci nodes.
...
Marvell Orion already exposes two.
2012-10-13 01:13:59 +00:00
b1203a9851
Make mandb path configurable. makemandb (and related tools) use
...
the path from the _mandb variable from man.conf now.
Set _mandb in man.conf to same value as was used before.
From Abhinav Upadhyay <er.abhinav.upadhyay@gmail.com>.
2012-10-06 15:33:59 +00:00
d60db5e056
PR/47024: Taylor R Campbell: handle "keys" directory and directory
...
permissions in general
2012-10-01 18:46:43 +00:00
35b7579ba4
add more sd and pci devices.
...
remove duplicate ch0.
2012-09-23 01:15:17 +00:00
f2b31f39d0
Add a pass-through ioctl for mfi(4), allowing userland to send raw commands
...
to the controller. This is compatible with the linux and FreeBSD
implementations.
Add the needed conversion for mfi ioctls in COMPAT_LINUX
Allocate a character major number, and create /dev/mfi0 by default
on amd64 and i386.
This allows (along with a hand-created /emul/linux/proc/devices file)
to run the MegaCLI linux binary provided by LSI.
2012-09-19 21:24:28 +00:00
2d427fcfd7
Add ./usr/libdata/debug/usr/lib/npf for rmind
2012-09-18 15:12:31 +00:00
9ee81fc63b
- Add OPENRD.
...
- Compile BEAGLEBOARD_INSTALL.
2012-09-17 15:37:33 +00:00
94cf4e2062
Add /usr/lib/npf.
2012-09-16 16:15:29 +00:00
e8e9f65b79
New test directory for npf
2012-09-12 14:07:10 +00:00
647d3a97c1
Make the "init" target create optys as well - those were removed from "all",
...
but we still need them in emergency setups and some install media.
Should fix PR install/46902.
2012-09-05 08:25:53 +00:00
982f691177
Add BCM5301X
2012-09-01 02:03:35 +00:00
47aef1fbf4
Add lots more ldN dkN
...
Add drvctl to md
2012-09-01 01:45:17 +00:00
c9ea1856a7
Use new makemandb -Q flag to be really quiet.
2012-08-29 20:34:18 +00:00
0ac85cc05d
- fix manet alias to MANET; giving an alias with the same name is a no/op
...
- protocol 84 is defined for as ttp and iptm, merge the two entries since
libc getprotoent() does not read the whole file and merge in the "files"
implementation.
2012-08-28 07:53:45 +00:00
9f498223f2
Handle any reports of state changes for INDICATORs
2012-08-27 21:50:19 +00:00
80b30d8cdf
Add placeholder test programs for share/mk files.
...
The main goal of this change is to simplify the further addition of test
cases for the share/mk infrastructure by adding a few placeholder test
programs to the tests tree.
To not leave these test programs empty, I have added a bunch of extremely
simple test cases to them.
2012-08-26 23:03:20 +00:00
1ebd502870
Fresh from IANA
2012-08-25 11:14:33 +00:00
c60c5ec2d8
actually install the new npf examples
...
add examples for a hash table file and a tree table file
add an ID string to host-npf.conf
2012-08-22 06:45:15 +00:00
matt