- move per VP data into struct sadata_vp referenced from l->l_savp
* VP id
* lock on VP data
* LWP on VP
* recently blocked LWP on VP
* queue of LWPs woken which ran on this VP before sleep
* faultaddr
* LWP cache for upcalls
* upcall queue
- add current concurrency and requested concurrency variables
- make process exit run LWP on all VPs
- make signal delivery consider all VPs
- make timer events consider all VPs
- add sa_newsavp to allocate new sadata_vp structure
- add sa_increaseconcurrency to prepare new VP
- make sys_sa_setconcurrency request new VP or wakeup idle VP
- make sa_yield lower current concurrency
- set sa_cpu = VP id in upcalls
- maintain cached LWPs per VP
drivers that attach to it. This allows for other host interface chips
that use the same keyboards and mice, such as the ones in the ARM
IOMD20, ARM7500, and SA-1111. The PC-compatible driver is still
called pckbc(4), and the new abstraction layer is "pckbport", so the
child devices have moved from sys/dev/pckbc to sys/dev/pckbport, which
also contains some code shared between all host controllers. To avoid
incompatibility, pckbdreg.h is still installed in
/usr/include/dev/pckbc.
In theory, this shouldn't cause any behavioural changes in the drivers
concerned. Thy just use rather more function pointers than before. Tested
on i386 and (with a new host driver) acorn32. Compiled on several other
affected architectures.
lcd driver can be configured with or without wsdisplay.
With wsdisplay, it supports text mode using rasops in 8bpp or 16bpp.
Without it, users only can mmap(2) the framebuffer.
XXX: 1-, 2-, 4-, or 24- bpp mode is not supported yet.
XXX: S3C24x0's LCD controller can have virtual screen which is bigger
than actual LCD panel. Our wsdisplay framework doesn't have
features to utilize it.
interrupts; some boards actually use those GPIO pins as external
interrupt sources.
Instead, assign soft interrupt bits to on-chip sources which are
not used by the IXP425 port.
up attached at the same time, and so that they can both prevent the forthcoming
iomdkbc(4) attaching to the keyboard slot.
[ file missed in last commit ]
obmitted resulting in a compilation failure in the autobuilds.
It effectively removes the now redundant reference to "beep.h" and removes
an associated prototype that wasn't used.
unknown problem with dcache_inv_range by using a wbinv for now
(similarly for ARM10).
When setting the ARM9 system control register, use the computed
cpuctrlmask value (not 0xffffffff) so that the clocking-mode bits are
not reset to FastBus mode (which isn't very fast).
Just before removing the vector page mapping, switch to the kernel
pmap's L1/vector page mapping so as not to pull the rug out from
under ourselves.
To prevent the stale L1/vector page mapping from being restored by
cpu_switch, replace the relevant fields of the dying process' pcb
with those of lwp0's pcb.
