b5e85ff91e
Note Sundance ST201 support
2002-06-01 17:38:53 +00:00
3a63a4122e
Note DFE-580TX
2002-06-01 17:33:21 +00:00
dc66b51bca
When the chip gets a transmit underrun, the driver resets the chip, which
...
cause the link to go down for several seconds on my Dlink DFE580-TX (quad-port
DL1002). This behavior is unacceptable, especially as the driver usually
gets several underrun at once, causing the link to be almost unaviable
for several 10s of seconds.
Bump the default transmit threshold to 1504 bytes to avoid transmit underrun.
2002-06-01 17:24:38 +00:00
208589bfca
On a Dlink DFE580-TX (DL-1002), attempting to transmit packets while the link
...
is down cause the chip to create an IE_UpdateStats condition which can't be
cleared, causing the driver to enter an interrupt loop.
Workaround: mask IE_UpdateStats
2002-06-01 17:20:13 +00:00
0707a91ae6
fix problems noted by Love <lha@stacken.kth.se> on current-users@ :
...
- add bpf0 to MAKEDEVTARGETS
- set dhclient-script and binstall perms to 555
2002-06-01 16:36:09 +00:00
a6370c993f
correct a comment
2002-06-01 16:22:54 +00:00
658fcb808d
Don't use SVR4 code for fcntl(F_GETFL) and fcntl(F_SETFL) because the constant
...
are not the same.
2002-06-01 16:16:36 +00:00
339203767f
Remove some unused debug cruft.
...
Only print out the registers passed to us from CFE #ifdef DEBUG.
2002-06-01 16:14:23 +00:00
dbae8649c2
Remove the unneeded early memsize/physmem calculations.
...
KNF, ANSIfy.
2002-06-01 16:12:01 +00:00
7a69e342b6
Add 11/780 and 8600 to list for who to create a RPB.
2002-06-01 15:33:22 +00:00
b6631fa4ec
Make this compile again since the previous change. KNF.
2002-06-01 15:10:43 +00:00
3142ca61e3
avoid overrun in NFS decoding.
2002-06-01 14:38:59 +00:00
9f6638d8c1
Add statclock and todr function arguments to the systemsw.
...
Add a system_set_todrfns() function.
2002-06-01 14:38:27 +00:00
e8aaf3c28b
Stop using the _MIPS_BSD_API_LP32_64CLEAN ABI. This causes a few problems
...
and it's easier/better to wait for true N32/N64.
2002-06-01 14:29:32 +00:00
02656b2e09
Change retval to be an array of register_t instead of array of int.
2002-06-01 14:07:33 +00:00
4cb13fbec6
There's two SMBuses in the BCM1250; list them both on the on-board device
...
list.
Get rid of some magic numbers.
2002-06-01 13:56:56 +00:00
51a91ebabb
KNF; make some function static; other minor cleanups.
2002-06-01 13:55:48 +00:00
1e10b4d4ad
Split USE_64BIT_FUNCTIONS into USE_64BIT_INSTRUCTIONS and
...
USE_64BIT_CP0_FUNCTIONS.
Add 64-bit pagezero function.
2002-06-01 13:52:23 +00:00
341ed8c0d3
Use CPU_MIPS_USE_WAIT and CPU_MIPS_NO_WAIT in the CPU table, and use
...
the generic name "mips_wait_idle" for the old function that had both
rm52xx_idle and mipsNN_idle entry points.
2002-06-01 13:45:45 +00:00
3611959ac8
Remove some unnecessary nops after some mfc0's.
2002-06-01 13:16:44 +00:00
42669ab3a4
Add "__attribute__((__unused__))" to hpt374_pio, hpt374_dma and hpt374_udma.
2002-06-01 12:47:20 +00:00
cf5f852d1c
Standardise on the name "MIPS_SR_BEV" instead of a couple of different
...
#defines for the same status bit.
2002-06-01 12:27:03 +00:00
5b5cc1ebb8
Add two new cpu capability flags: CPU_MIPS_USE_WAIT for CPUs that use a
...
"wait" instruction based cpu_idle(), and CPU_MIPS_NO_WAIT for specific
CPUs that don't use this (applicable to mips32/64 mainly).
2002-06-01 12:10:45 +00:00
d75c18b050
Use the current MIPS in_cksum for in4_cksum too.
2002-06-01 11:41:33 +00:00
937b671271
use exit(int), not exit(void), consistently - even if the arg has no meaning.
2002-06-01 11:40:31 +00:00
e5aff46bc6
Add evbmips and sbmips.
2002-06-01 09:37:30 +00:00
5fcd112b3a
Add gcc 3.x version.
2002-06-01 09:22:44 +00:00
aa912aee09
Sort SEE ALSO.
2002-06-01 09:21:21 +00:00
eb6d65caac
Widen tag for list.
2002-06-01 09:21:11 +00:00
4edf535225
For macro arguments, separate punctuation from the argument so that the
...
punctuation does not get marked up with it.
2002-06-01 09:16:08 +00:00
09ce0a0cff
Make sure that we are using the Atari version of installboot!
2002-06-01 08:18:45 +00:00
0f40d327f4
make "keep state" work for SYN without win scale option.
2002-06-01 07:21:11 +00:00
02bfd5937c
add usermgmt.conf (5)
2002-06-01 06:35:35 +00:00
9210200e15
add usermgmt.conf man page.
...
user -e and -f now accepts "month day year" (ala chpass(1)) and
seconds-since-epoch.
correct man pages accordingly.
2002-06-01 06:28:06 +00:00
23d9c4fc27
Explicitly include <arch/sun3/include/param3{,x}.h> rather than
...
<machine/param3{,x}.h>, so that this file can be included on non-sun3 builds.
2002-06-01 06:20:37 +00:00
874c812dae
correct descriptions of SLIST_REMOVE_HEAD() and SIMPLEQ_REMOVE_HEAD()
2002-06-01 06:08:07 +00:00
0c16d570ac
no need for inetd_dummy variable. from openbsd
2002-06-01 03:41:33 +00:00
0062113f7e
minor KNF
2002-06-01 00:32:41 +00:00
2dc34bbe40
cleanup main() by splitting it up in two. inspired by openbsd change
2002-06-01 00:28:52 +00:00
d7d367fd73
Couple of .Dv fixes.
2002-06-01 00:27:19 +00:00
69c161be36
socklen_t cleanup. make MULOG code actually compile (is there anyone using
...
it? otherwise, i'd like to nuke it)
2002-06-01 00:15:08 +00:00
d816e24b39
avoid fd_set overrun.
2002-05-31 22:10:18 +00:00
c49ac7a5a6
Use __mips__ instead of mips.
2002-05-31 21:43:49 +00:00
e50420de38
Statements must follow labels.
2002-05-31 21:40:49 +00:00
559a9eafce
strlcpy
2002-05-31 21:24:26 +00:00
144cc23985
Use __mips__ instead of mips.
2002-05-31 21:19:03 +00:00
7dc5cba95f
Regen.
2002-05-31 21:13:12 +00:00
49331870a4
Add many Keyspan products, and distinguish the device IDs before and
...
after loading firmware.
2002-05-31 21:11:56 +00:00
80f6433965
Fix printf format issues.
2002-05-31 21:09:03 +00:00
698df788fc
Add -ffreestanding.
2002-05-31 20:57:41 +00:00
bouyer