Aren/NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
73,948 Commits 606 Branches 0 Tags 3.1 GiB
b551237fb6
Commit Graph

2020 Commits

Author SHA1 Message Date
mjacob
b551237fb6 add two minor ATIO2 offsets 2000-12-28 08:23:48 +00:00
mjacob
829a533bfb Restore the change fvdl made. Sorry about not noticing it. The 
header (about 'Maintainer') is supposed to help encourage folks
to coordinate with me.
 2000-12-28 08:11:52 +00:00
bjh21
a48c9194bb Print the newline after the memory test. This makes it clear that the delay's 
related to this driver rather than the next device to be attached.
 2000-12-23 16:37:20 +00:00
wiz
c8b0b91e7e Fix pathnames in comment. 2000-12-23 01:37:57 +00:00
onoe
2079f9d276 improve an_cmd() slightly: 
- strip unnecessary loop to get command result status
- ack command after clearing busy bit

XXX: it still sometimes get timeout to get status(0xff50) or statistics(0xff68)
     probably due to heavy load of firmware in receiving.
 2000-12-21 15:37:18 +00:00
onoe
c6607f2fef move definition of AN_INTRS from anreg.h to anvar.h 
strip off AN_EV_CMD from AN_INTRS because it causes severe performance
problem.
 2000-12-20 23:30:36 +00:00
briggs
9a73f8b22b Make _sure_ that we do not use selatn3 when it is not present. Fixes a 
problem on pmax reported by Izumi Tsutsui.  Tested also on alpha and mac68k.
 2000-12-20 15:49:03 +00:00
eeh
d1ab475964 Make the driver negotiate sync again and remove some (hopefully) superfluous 
DELAY()s.
 2000-12-20 03:19:34 +00:00
pk
c6bd81f8a6 Fix reversed logic when setting setting sync-negotiation ability flag 2000-12-19 14:08:17 +00:00
onoe
684fe5613d cleanup attach procedure, use tsleep() instead of long delay (and ignore 
timeouts).
stop driver after suspend.
XXX: should use command interrupt but no document...
XXX: status update sometimes failed perhaps due to collision.
	(RID 0xff50 or 0xff68 access failed)
 2000-12-19 08:00:55 +00:00
thorpej
ba4b6847df Fix a problem with the ALTQ changes that can cause bogus memory 
refernces.  Problem reported by Luke Mewburn.
 2000-12-19 00:06:01 +00:00
thorpej
4dbafc4a71 Remove an IF_PREPEND() that slipped through. 2000-12-18 23:57:13 +00:00
briggs
7ea0edc288 If the target rejects a tag message, turn off tagged transfers for that target. 
Also, adjust message/command construction in ncr53c9x_select() to work no
matter how the structure alignment works out (needed at least for m68k).
Tested by me on mac68k & alpha, and sanity-checked by eeh.
 2000-12-18 23:39:44 +00:00
thorpej
df6482a625 ALTQ'ify. 2000-12-18 20:32:08 +00:00
thorpej
cc6e5d835f Adapt to ALTQ-related API changes (driver is not fully ALTQ'ified yet). 2000-12-18 20:23:04 +00:00
eeh
519aef8cf4 Make sure bits in the flags are disjoint. 2000-12-17 06:18:21 +00:00
briggs
d25ab824c8 Back out previous change. It appears to be in error. There is something 
else that is causing the esp driver on the mac68k to fail miserably.
 2000-12-17 04:38:29 +00:00
briggs
0debc0e91e At least the 53c96 does not work with the selatn3 command. Disable it 
for both the 53c94 and 53c96.  This also addresses PR port-mac68k/11716.
 2000-12-17 03:29:03 +00:00
thorpej
8489b5e4cf if_qflush() -> IFQ_PURGE() 2000-12-14 17:48:23 +00:00
thorpej
6b16911a43 ALTQ'ify. 2000-12-14 06:27:23 +00:00
onoe
a7125e435c Add PCI version of Aironet, not tested at all. 
ISA/ISApnp version won't come since I don't know about isa...
 2000-12-14 04:11:25 +00:00
onoe
d5dd5139a3 Support 80211NWKEY and 80211POWER ioctl. 2000-12-13 20:21:10 +00:00
thorpej
c5293456da Adapt to bpfattach() changes, and further centralize the bpfattach() 
and bpfdetach() calls into link-type subroutines where possible.
 2000-12-12 18:00:22 +00:00
onoe
aa513e6338 add support(?) for PC4500 which is a 2Mbps product. 
Though ifconfig -m no longer show 5Mbps/11Mbps for PC4500 by this fix,
I cannot find how to set fixed transmit speed to the firmware.
FreeBSD version of driver apparently ignore the value set by ancontrol(8).
 2000-12-12 05:34:02 +00:00
onoe
99675e3dde cleanup headers: remove duplicate definition, split reg.h/var.h. 2000-12-12 05:11:15 +00:00
thorpej
41d6a62c1c s/Ethernet/802.11/ when printing the address. 2000-12-12 01:32:34 +00:00
onoe
c63194c7af To fix panic at "ifconfig an0 down", 
define ANCACHE in if_an_pcmcia.c (XXX)
try not to access registers after interface down.
 2000-12-11 23:58:55 +00:00
onoe
9c25e9208a Port 'an' driver for Aironet PC4500/PC4800 IEEE802.11 card from FreeBSD. 
This is very adhoc work for IETF meeting.
- Since it seems that 'an' and 'wi' have similar hardware, low level
  functions should be shared.
- There are PCI/ISA cards of Aironet but not supported yet.
- The wiconfig interface is changed so that wiconfig cannot be used.
- 'ancontrol' of FreeBSD is not ported.
- Only infrastructure mode is tested.
- WEP is not supported.

Though I only have an Aironet card, Cisco card should be expected to work.
 2000-12-11 23:16:50 +00:00
ws
8132c2a6aa Fix the previous differently: 
The intent was to protect the full range of ports on the board by the
barriers.  But the start address was wrong.  Fix it.

While here, change two other barriers to also protect the full range
(not only the nic ports), and add yet another similar barrier.
 2000-12-11 17:07:38 +00:00
ad
2940363203 Report soft-errors-per-unit once per minute at most. 2000-12-11 13:19:50 +00:00
eeh
af770220fa Fix for chips that don't grok NCRCMD_SELATN3. 2000-12-10 19:25:07 +00:00
mjacob
af2807f9f7 Finally fix this driver to be sensible about the ENDIAN dance. It's not 
quite simply a question of the Qlogic being little endian and having
to have stuff swapped on big endian machines- it also has to do with the
fact that the SBus and PCI DMA layouts are wierd with respect to this.

At any rate, now finally fixed- works on Mac G4, tested it on a SS10
for sparc, checked on alpha to see if I've broken anything, and as
soon as I get another spare afternoon I'll finally install a sparc64
version which should just work (as it'll be like the Mac).
 2000-12-09 08:06:31 +00:00
tsutsui
fd97da6384 Add (missed) bus_dmemem_free() in rtk_detach(). 2000-12-09 02:02:20 +00:00
tsutsui
e8bfefe60c - Since rtk_rxeof() was rewritten, we don't have to reserve a few bytes 
before the Rx buffer.
- Reduce delay on EEPROM access.
- Some more cosmetics.
 2000-12-05 11:11:49 +00:00
fvdl
d26269e0a6 'error' was not initialized in the _ioctl function, potentially returning 
!= 0 values in the non-error case.
 2000-12-04 11:18:49 +00:00
fvdl
0888965bb7 Remove uninitialized variable usage (it was redundant anyway). 2000-12-04 11:05:32 +00:00
eeh
03e0f9950a Fix bug in non-dma select code i added. 2000-12-03 23:25:24 +00:00
jlam
9cfd45593f Set range of memory protected by read/write bus space barriers to the 
correct size, instead of extending past the mapped region.
 2000-12-03 23:15:23 +00:00
tsutsui
311a1a842c Clean up receive interrupt routine: 
- Use MGETHDR + MCLGET + memcpy rathar than m_devget + m_adj + m_copyback.
- Call bus_dmamap_sync(9) correctly for Rx buffer.

Mostly from thorpej's if_rtp.c.
 2000-12-03 14:24:17 +00:00
fvdl
2b69243845 Add AHC_NO_TAGS option to switch off tagged queueing. Done because 
tagged queueing has a severe performance impact (60%) on write
throughput with UBC. Needs investigation.
 2000-12-02 14:53:01 +00:00
augustss
a51ea43fd6 Make this compile again (on i386). 2000-12-01 04:37:54 +00:00
pk
d736ce5086 We don't need <sys/proc.h>, <sys/user.h> and <machine/cpu.h>. 2000-11-30 23:21:39 +00:00
pk
55fa60c3e5 De-__P(). 2000-11-30 23:12:43 +00:00
pk
58b6f2ef7d KNF patrol && De-__P(). 2000-11-30 23:06:44 +00:00
pk
03903e1da8 KNF patrol. 2000-11-30 23:01:03 +00:00
tsutsui
786dc5161c Clarify RX status header length and some cosmetics. 2000-11-30 15:51:57 +00:00
tsutsui
fd4d074b27 After rev 1.16 rtk driver uses the CRC from the chip, 
so no need to adjust Rx address for it. Fixes kern/11301.
 2000-11-30 15:33:04 +00:00
thorpej
64222ad03a Fix some printf formats, and remove SPARC-specific debugging stuff. 2000-11-30 14:41:46 +00:00
pk
7006bcd449 Fix two cases of reversed arguments to printf(); 2000-11-30 09:58:03 +00:00
eeh
9e7aa98aa6 Add TAG QUEUE support to the ncr53c9x driver. 2000-11-30 00:19:25 +00:00