b2fe046c8c
Move the kernel forward in memory, starting it 512K in from the
...
bottom of RAM. The bootloader is now loaded 2K in from the bottom
of RAM, so we need to make space for it.
2001-11-22 00:59:23 +00:00
aabfa72384
- Clean up the bootloader Makefiles somewhat.
...
- Build an ECOFF version of the bootloader as "boot". As a temporary
measure (due to a bug in libbfd which has not yet been fixed, but
for which a work-around exists as a patch), install and ELF version
of the bootload as well as "boot.elf". "boot.elf" will go away once
the toolchain issue is resolved.
2001-11-22 00:58:07 +00:00
b5e0d97bf7
Add some DIAGNOSTIC tests.
2001-11-22 00:57:14 +00:00
37f2beed3e
Close multiplxees BEFORE removing the event variable they are
...
using (an interrupt at the wrong point caused disaster).
2001-11-22 00:54:23 +00:00
440e119ba5
Patch from mycroft to fix case of rm -rf nonexistant on a r/o fs would still
...
report errors. Checking the fts_errno for ENOENT before attempting removal
fixes this.
2001-11-22 00:16:07 +00:00
5ac54229c9
Don't make the symlinks on clean rules as well as obj rules. Breaks r/o source
...
trees that haven't gotten to the make obj recursion part of make build
otherwise.
2001-11-22 00:14:20 +00:00
0d11dd0127
Check for USETOOLS!=yes in addition to MKTOOLS==no to generate the empty rule
...
sets. Otherwise platforms not running the new toolchain will end up with
lossage as tools attempt to get built and installed into /bin (due to
bsd.own.mk properly checking USETOOLS before setting up a default TOOLDIR).
Don't print the warning unless MKTOOLS=no
2001-11-22 00:13:10 +00:00
3bad9b1f33
Repeat James Chacon's fix from sys/lib/lib{kern,sa,z}:
...
Don't make clean and cleandir depend on the lib subdir.
Just check for it's existance before running the submake.
This makes it possible to run a make build (which runs
cleandir before make obj) in a r/o source tree.
2001-11-22 00:04:55 +00:00
3975cecee7
- Adjust bootinfo to work sanely in an ARCS world, and pass some
...
info along to the kernel (currently just the symbol table info).
- Don't bother with the startprog dance; we don't need to do anything
special, here, so just call the entry point directly.
- A bunch of random cleanup.
2001-11-21 23:33:17 +00:00
38afb59582
- Check for provided bootinfo from the bootloader. If we find it,
...
save off DDB symbol table information.
- Make loading of memory work reliably with the bootloader; for each
candidate memory type from ARCS (which now includes LoadedProgram),
check to see if the kernel is within that chunk, and load the pages
around it if it is.
2001-11-21 23:27:20 +00:00
741c7a2997
sbic -> wd33c93, in preparation for the core driver going into
...
sys/dev/ic.
2001-11-21 23:22:25 +00:00
24cd3174c5
prep/pccons.h is gone.
2001-11-21 22:40:59 +00:00
07c4b937eb
prep has no special dependencies on pccons; remove.
2001-11-21 22:40:45 +00:00
bbd072ffbb
s/^\.Are/.Ar/
2001-11-21 22:29:20 +00:00
482d429ddc
Install loader in /usr/mdec.
2001-11-21 22:14:51 +00:00
57bd30a92c
s/pmax/sgimips/ in comments.
2001-11-21 22:13:55 +00:00
2229499bfb
Don't make clean and cleandir depend on the lib subdir. Just check for it's
...
existance before running the submake. This makes it possible to run a
make build (which runs cleandir before make obj) in a r/o source tree
2001-11-21 22:10:54 +00:00
ba1d5700f2
Note addition of sgimips/stand.
2001-11-21 22:00:34 +00:00
8390d1903a
Skip relocation if OpenFirmware already loaded us at the right address.
2001-11-21 21:38:00 +00:00
ec3da3741b
Fix RCSID.
2001-11-21 21:05:41 +00:00
e2397b7f93
Change symtab info to unsigned longs.
2001-11-21 20:31:49 +00:00
1510317819
Spelling fix.
2001-11-21 20:30:09 +00:00
4b1d2d4ce9
Add bootinfo stuff for NetBSD/sgimips. Changes to kernel and bootloader
...
forthcoming.
2001-11-21 20:29:31 +00:00
1fd7eeefcd
"than" instead of "then".
2001-11-21 19:14:19 +00:00
a984ffbe34
less than, not then, and re-established, not re-estabished
2001-11-21 19:11:44 +00:00
4e63f44f6c
Initial cut at a bootloader for NetBSD/sgimips, by Michael Hitch.
2001-11-21 19:09:06 +00:00
1f1e26bd6d
Presence looks better with a 'c' instead of an 's'.
2001-11-21 19:01:31 +00:00
55e6492076
Explicitly write explicitly without a second e.
2001-11-21 17:33:26 +00:00
e26efb5202
A few more editorial changes.
2001-11-21 17:22:56 +00:00
74b5493cd3
Really improve grammar.
2001-11-21 17:17:42 +00:00
a395f3700a
Improve language.
2001-11-21 17:11:55 +00:00
9c6275fe9e
Add a commented out ehci driver (for the adventurous).
2001-11-21 17:11:02 +00:00
3b945082ba
Update a little for new reality.
2001-11-21 16:28:11 +00:00
96ca4ebaaf
Sort SEE ALSO.
2001-11-21 16:26:18 +00:00
bc136d1c2e
Make it compile without debug.
2001-11-21 16:22:58 +00:00
9dae283057
Add another "feature".
2001-11-21 16:12:56 +00:00
b2dc7b3fd3
Follow a safer protocol when updating the QH.
...
The EHCI driver isn't really working properly, but now the SCSI driver
correctly identifies my CD-RW drive! :-)
2001-11-21 16:05:13 +00:00
2c4813fa9d
Use NULL not 0.
2001-11-21 15:48:37 +00:00
df1a49923c
Fix indentation and typos.
2001-11-21 15:37:41 +00:00
56b4a88fd0
The C example was wrong.
...
Is there any reason for this program to still be around???
2001-11-21 15:30:00 +00:00
6a8524d62e
- For mount_mfs, always ignore the `special' field and just fake up
...
the label instead. The previous change to use opendisk() prevented
this from working with special fields such as `/dev/wd0b', and this
new method is arguably cleaner anyway. Fixes [misc/14654]
- Don't bother supporting -T for mount_mfs anymore, since it's
superfluous. The option still works (for compatibility reasons), but
it's just ignored and not documented anymore.
- Use an RPM of 10000 instead of 3600 for the fake label (why not :-)
2001-11-21 15:23:40 +00:00
5539d5afe6
Implement (incorrect?) data toggle clear method.
...
Implement allocation of qTD chains.
2001-11-21 14:00:12 +00:00
6bba920516
Wrap dump routine prototypes in #ifdef USB_DEBUG
2001-11-21 13:44:47 +00:00
ca0b46691f
Mask correct interrupt after error interrupt.
2001-11-21 13:43:38 +00:00
02f41ec3e6
Mask the correct interrupt after a door bell interrupt.
2001-11-21 13:42:19 +00:00
0adc2bbba2
Implement bulk transfers.
2001-11-21 13:04:50 +00:00
2d72c2726c
Add some interrupt processing.
2001-11-21 12:28:23 +00:00
4d4da7e06a
Fix typo in comment.
2001-11-21 12:25:55 +00:00
df2b478d48
increase the value of maxusers to 16.
2001-11-21 11:28:09 +00:00
957665b652
Use even more standard names for standards.
2001-11-21 11:25:22 +00:00
thorpej