b1dc6a8603
s/_trunc_page/m68k_trunc_page/
1997-06-10 19:36:53 +00:00
05b8948c41
Define NBSG from (1 << SEGSHIFT) and move some variables before
...
<m68k/param.h>.
1997-06-10 19:32:15 +00:00
931d90fcee
Use the MI <m68k/param.h> include.
1997-06-10 07:54:35 +00:00
a204fb7981
Initialize machine from MACHINE.
1997-06-08 23:54:19 +00:00
7a66732d34
Back out BUILDDIR and NOINSTALL changes.
1997-05-31 21:21:13 +00:00
83498d7e88
Remove empty libinstall target and add NOINSTALL=1.
1997-05-30 13:43:06 +00:00
3f6f86d875
Undo changes which make pmap_xxxx_page() functions re-entrant; just block
...
all interrupts which might cause re-entrancy.
Allow virtual addresses which are not managed by the MI VM system to
participate in the PV system.
Remove a few frivoulous TLB cache flushes.
1997-05-30 07:02:14 +00:00
4502541573
When turning off the drive motor, de-select the drive so the busy light
...
extinguishes.
1997-05-30 03:23:11 +00:00
e512003d6e
Add non-inline version of _splraise.
1997-05-29 22:20:01 +00:00
2e7b1f13dd
Define getsr() as _getsr() for backward compatibility.
1997-05-29 22:18:24 +00:00
56e5d1c7c5
Add inline definitions for _getsr() and _splraise(), and
...
define splimp() using splraise so early calls to the VM
code (and pmap) do not accidently enable interrupts.
1997-05-29 22:17:38 +00:00
1b2aae80c2
Added new lock system for the two virtual pages used in temporary mappings.
...
Allows pmap_zero_page() and pmap_copy_page() to be re-entrant.
1997-05-28 04:28:52 +00:00
b53e0d4fb7
Coded to work with new lock system for tmp_vpages.
1997-05-28 04:27:00 +00:00
89aa743138
Config file for a RAMDISK kernel.
1997-05-27 01:06:33 +00:00
42012469ef
Document that tapeboot has been tested and works.
1997-05-26 03:44:42 +00:00
fc60f1979e
Prevent RAM disk hooks from compiling until sun3 md_root.c can support
...
ram disk images that are read in from the outside.
Sync with some old local changes.
1997-05-24 00:09:49 +00:00
0304ff6aed
Implement code to dynamically size the number of page tables based on available
...
RAM at boot.
Also did some cleanup of unused functions, updated several comments, and
removed unecessary 'XXX's.
1997-05-20 06:01:19 +00:00
f7e146ad7f
Return EIO instead of EFAULT when read/write is too big or small.
1997-05-16 05:47:14 +00:00
608a6800e6
Things are stable enough that DDB, PMAP_DEBUG and DIAGNOSTIC aren't needed
...
anymore.
1997-05-15 01:49:27 +00:00
a83cf310c1
The Hydra is 20 MHz and the Pegasus is 33 MHz.
1997-05-14 16:45:22 +00:00
5079510304
Make the "hydra" call leds_hydra() from clock_attach().
1997-05-14 16:42:45 +00:00
e6fa5bc33d
Add leds_hydra().
1997-05-14 16:37:01 +00:00
b209530013
Remove call to leds_init (it is already in obio_init).
1997-05-14 16:13:31 +00:00
ebb856e274
Long awaited MI/MD separation completed.
1997-05-14 01:37:23 +00:00
1aa91b893d
Eliminate references to vmspace.vm_pmap
...
(also fix some comments).
1997-05-13 17:17:12 +00:00
1c454cc472
Diagnostic LED on 3/80 appears to be active-high, not active-low as previously
...
thought. It remains to be seen if this is true for the 3/470.
1997-05-11 06:16:26 +00:00
3d8d0c485c
Add call to leds_init() after everything has started up ok.
1997-05-11 06:15:09 +00:00
185b24dd5b
Use libinstall::, not install:, to prevent instaling LIB.
1997-05-07 16:20:26 +00:00
6fe4889b92
cleanup use of whitespace
1997-05-07 02:20:26 +00:00
3f7423a432
Wrap all label references with new macros in m68k/asm.h in preperation
...
for ELF switchover. (eventually)
1997-05-02 23:07:35 +00:00
24af362f60
Implement pmap_pa_exists() so that /dev/mem works.
...
This was the reason ps (kvm_getargs) did not work.
1997-05-01 15:00:11 +00:00
b9a0ca59bb
oops...
1997-05-01 14:58:20 +00:00
887d5be03e
Forgot to import this. (Thanks, der Mouse)
1997-05-01 14:57:17 +00:00
42f8cf900b
Use unsigned when doing copy/xor check.
1997-04-28 23:43:56 +00:00
cb96a536e4
Add a comment about obio_mapin().
1997-04-28 23:38:47 +00:00
1046c915b6
Drivers that use obio_mapin should enforce OBIO attachment
...
(just to be paranoid).
1997-04-28 23:30:19 +00:00
92efd222d0
Hack for now: if fpu is there, report it as an mc68882.
1997-04-25 19:16:10 +00:00
dfc2e0f30d
Add devices: idprom, oclock. Add file leds.c.
1997-04-25 19:12:57 +00:00
1676e3a212
Add idprom, oclock, and rearrange somewhat.
1997-04-25 19:11:48 +00:00
cd6ee4737e
Renamed obio_alloc/obio_mapin.
1997-04-25 19:02:46 +00:00
678f326c7f
Make idprom_init() figure out where the IDPROM resides.
...
Add autoconfig glue, which currently just shows the
address where the IDPROM was found.
1997-04-25 19:02:06 +00:00
49f095a342
No longer need eeprom_init().
1997-04-25 18:57:49 +00:00
e2ca51d2a1
Fixed OBIO locators bug, so this can do the normal thing now.
...
Also improved handling of spurious interrupts, and sync up with
the sparc version.
1997-04-25 18:55:05 +00:00
4c64781365
Moved the actual model identification work into identifycpu(),
...
which used to be in _startup.c:_verify_hardware().
Use sunmon_abort() in cpu_reboot() for now...
1997-04-25 18:52:11 +00:00
9ae1b69554
Rename "Idle" to "_Idle" so clock.c can reference it.
1997-04-25 18:48:39 +00:00
25d7b6b348
Provide a struct representing only the clock.
1997-04-25 18:47:41 +00:00
885a1fc439
Add /dev/leds support.
1997-04-25 18:46:10 +00:00
2dd63e3378
Use bus_mapin, and minor tweaks.
1997-04-25 18:45:39 +00:00
f7749f47fe
Add "oclock" support for the Sun3/470.
1997-04-25 18:31:37 +00:00
8f9276c727
Move the _verify_hardware() work into machdep.c:identifycpu().
...
Call obio_init() after _vm_init() so we can use peek_byte() to
probe the idprom. Be quiet in _save_symtab() when all is well.
1997-04-25 18:29:58 +00:00
veego