af8a94ec80
Code references should use movab, not moval. Fix gas-2.9.1 complaints
...
with intvec.s
1998-10-06 02:07:30 +00:00
08fbcdd506
Fix bug with the return value in filecore_label_locate(). This bug caused
...
an assertion to fail in disksubr.c if a label was written to a disk with
a filecore partition at the start of the disk.
1998-10-06 01:47:53 +00:00
71a653d388
Add Coda
1998-10-06 01:44:11 +00:00
5006dbf868
cpu_set_kpc() prototype is already in <sys/systm.h>.
1998-10-05 22:11:15 +00:00
40beab6ad6
If a lock is held do not spin in a read/write loop but just read the lock
...
until it is released. This is easier on the bus cache coherency logic.
1998-10-05 19:58:19 +00:00
b4dba57069
Footbridge based kernels do not need constab.
1998-10-05 16:03:04 +00:00
e605a01dce
Footbridge based kernels don't use dev/cninit.c
1998-10-05 15:41:19 +00:00
550ee6b308
rename getprop routine to avoid conflict with the one in bsd_openprom.h
1998-10-05 07:13:07 +00:00
ddde128de9
Track compat/linux/arch/* reorg.
1998-10-05 05:55:35 +00:00
8778509c45
* Make cpu_identify() routine table-driven.
...
* MIPS3 sanity check now allow MIPS1 models to boot.
1998-10-05 05:26:00 +00:00
b9fef4b8ad
The 2-disk install floppy allows us to add:
...
* 3000-series CPU support, plus all the tc devices
* 4100-series CPU support
* misc SCSI HBA support (removed earlier for space reasons)
1998-10-05 05:04:46 +00:00
5d9338a24b
Don't put the fcom device in constab.
1998-10-05 02:46:31 +00:00
664d0f374c
Base configuration for CATS kernels.
1998-10-05 02:43:43 +00:00
35f31dce6e
Implement consinit() here instead of using the arm32/machdep.c version.
...
Use information passed from via the boot arguments to determine which
device to use as the console.
Add support for initialising the CATS ISA subsystem.
During the early bootstrapping use fcomcnattach()/fcomcndetach to enable
debug and diagnostic information to be sent to the diagnostic serial
port. This is only used during the early part of initarm() until things
have been relocated and the real console can be initialised().
1998-10-05 02:40:26 +00:00
8909a4e529
Define both EBSA285 and CATS bootinfo structure magic numbers.
1998-10-05 02:36:49 +00:00
4d8d0f4e6d
Define fcomcnattach() and fcomcndetach() functions for the diagnostic
...
serial port.
Disable the old probe and init functions as we no longer use constab and
cninit().
1998-10-05 02:36:02 +00:00
0d3d74ceeb
Footbridge based systems don't use cninit() so don't use the version of
...
consinit() defined here.
1998-10-05 02:33:46 +00:00
c9937d0234
cleanup.
1998-10-05 02:01:57 +00:00
9f317a1a9d
Add syncicache after text loading.
1998-10-05 01:58:03 +00:00
86a0875460
Add dsrtc device and associated file.
1998-10-05 01:21:39 +00:00
f452e15aff
Add a driver for the Dallas Semiconductor RTC found on CATS motherboards.
1998-10-05 01:20:57 +00:00
18ccba3b4e
Make sure ISA interrupts have been setup prior to configuring devices.
...
This is not nice and a better solution is needed. Really this should be
done when the PCI-ISA bridge is discovered but it is possible that
some PCI interrupts may be routed via the ISA interrupt controller
and thus this needs setting up first.
1998-10-05 01:17:55 +00:00
91eeeff347
Add support for interrupts that are actually routed via an ISA interrupt
...
controller.
(I'm not happy with this approach but it works so I'll use it for the
moment until I complete run-time selection of the interrupt handling based
on recognised hardware).
1998-10-05 01:09:38 +00:00
197c78db08
Prototype isa_intr_alloc() (Needed by ISA PnP code) and sysbeep().
1998-10-05 01:05:00 +00:00
100a13e50a
Add ISA legacy mode support. Currently this is used by CATS kernels
...
which routes the PCI IDE interrupts in a similar fashion to i386 machines
(i.e. on ISA irq14 & 15).
1998-10-05 01:03:52 +00:00
dda219af66
Add file arm32/isa/isa_cats_machdep.c.
...
Build isa/isa_io.c and isa/isa_io_asm.S for both SHARK and ISA systems.
1998-10-05 01:01:43 +00:00
c2d2dca344
Initial commit of ISA bus support for CATS machines (DC21285 based
...
motherboards).
1998-10-05 01:00:57 +00:00
60e0cbbab8
Use sysbeep() rather than beep_generate for consistancy and the sysbeep
...
device.
KNF a chunk of this file.
1998-10-05 00:53:47 +00:00
67d78e486f
Remove beep related stub code now we have a sysbeep device.
1998-10-05 00:51:21 +00:00
4a1b880605
Add files.usb. It should work.
1998-10-05 00:49:15 +00:00
8eca271694
Add sysbeep device.
1998-10-05 00:49:13 +00:00
ae4624b175
Add sysbeep device with ISA and VIDC attachments.
1998-10-05 00:44:45 +00:00
6f5d4c52a1
sysbeep device attachments for vidc based audio systems.
1998-10-05 00:42:41 +00:00
5f37409d37
Implement sysbeep device for ISA systems. This just hooks into the pcppi
...
code.
1998-10-05 00:41:31 +00:00
20122120a2
Add arm32/isa/joy_isa.c and arm32/isa/joy_isapnp.c
1998-10-05 00:39:44 +00:00
5fe09f2a80
Add ISA and ISAPNP attachments for joysticks.
1998-10-05 00:35:40 +00:00
ec897ee047
Fix a problem reported by Michael Hitch. Basically, our libc relies on the
...
non-standard way of invoking sigreturn, specifically a side-effect that I
overlooked. Thus, longjmp's return value was getting clobbered.
Sigh, so burn trap #3 just as sigreturn.
XXX We need an SVR4-style {get,set}context(2) to avoid wasting new
XXX trap vectors in the future.
1998-10-05 00:00:17 +00:00
c1e5866bbe
Fix a typo in a comment.
1998-10-04 23:56:17 +00:00
c01f29bdf1
Sigh, we are going to have to burn a vector for Just Sigreturn again,
...
for now, until we have a more generic {get,set}context(). Update the
comment for trap #3 accordingly.
1998-10-04 23:38:55 +00:00
7a9e6fd3f7
Remove dead FPE option.
1998-10-04 19:03:37 +00:00
e6145e36a2
Correct Linux compat include file names.
1998-10-03 23:38:32 +00:00
2b727ad9e9
The linux compat i386 "files" file moved into arch/
1998-10-03 23:17:03 +00:00
acce9b3b1b
Make this compile again when DEBUG is defined.
1998-10-03 21:58:52 +00:00
49a45fed9b
If the memory range of the machine is such that no bouncing is necessary,
...
or if the device is capable of 32-bit DMA (specified by ISABUS_DMA_32BIT),
clear the map's bounce threshold at map creation time.
1998-10-03 21:53:04 +00:00
01a1588265
Initialize the DMA map's bounce threshold to the tag's at map creation time,
...
and use the map's threshold when loading the map.
1998-10-03 21:38:48 +00:00
10557b15d7
Add a private bounce threshold to the DMA map, initialized in a bus-dependent
...
fashion.
1998-10-03 21:24:00 +00:00
c0f54daf70
Add em_alpha_exp
1998-10-03 18:17:14 +00:00
e24d09740e
call gate for solaris-2.6 syscalls [from frank]
1998-10-03 18:08:39 +00:00
36f308f4cc
Add an LDT for Solaris-2.6 syscalls [from Frank]
1998-10-03 18:05:25 +00:00
787fcfeac7
copyright has been assigned to TNF, update notice
1998-10-03 02:14:30 +00:00
matt