them in the mi "files" file, and remove include statements from md files.
These shouldn't pull in additional kernel code when not in use, so it
shouldn't do any harm except a risk of namespace collisions which
should be easy to fix.
- Reduce available SPL levels for hardware devices to none, vm, sched, high.
- Acquire kernel_lock only for interrupts at IPL_VM.
- Implement threaded soft interrupts.
This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.
TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.
NOTES:
pmppc was removed as an arch, and moved to a evbppc target.
need to understand the locking around that field. Instead of setting
B_ERROR, set b_error instead. b_error is 'owned' by whoever completes
the I/O request.
config_handle_wedges() and read_disk_sectors(). On x86, handle_wedges()
is a thin wrapper for config_handle_wedges(). Share opendisk()
across architectures.
Add kernel code in support of specifying a root partition by wedge
name. E.g., root specifications "wedge:wd0a", "wedge:David's Root
Volume" are possible. (Patches for config(1) coming soon.)
In support of moving disks between architectures (esp. i386 <->
evbmips), I've written a routine convertdisklabel() that ensures
that the raw partition is at RAW_DISK by following these steps:
0 If we have read a disklabel that has a RAW_PART with
p_offset == 0 and p_size != 0, then use that raw partition.
1 If we have read a disklabel that has both partitions 'c'
and 'd', and RAW_PART has p_offset != 0 or p_size == 0,
but the other partition is suitable for a raw partition
(p_offset == 0, p_size != 0), then swap the two partitions
and use the new raw partition.
2 If the architecture's raw partition is 'd', and if there
is no partition 'd', but there is a partition 'c' that
is suitable for a raw partition, then copy partition 'c'
to partition 'd'.
3 Determine the drive's last sector, using either the
d_secperunit the drive reported, or by guessing (0x1fffffff).
If we cannot read the drive's last sector, then fail.
4 If we have read a disklabel that has no partition slot
RAW_PART, then create a partition RAW_PART. Make it span
the whole drive.
5 If there are fewer than MAXPARTITIONS partitions,
then "slide" the unsuitable raw partition RAW_PART, and
subsequent partitions, into partition slots RAW_PART+1
and subsequent slots. Create a raw partition at RAW_PART.
Make it span the whole drive.
The convertdisklabel() procedure can probably stand to be simplified,
but it ought to deal with all but an extraordinarily broken disklabel,
now.
i386: compiled and tested, sparc64: compiled, evbmips: compiled.
FINDCOMM contains the find(1) command that produces the list of
NetBSD sources that all architectures share, COMM. For backwards
compatibility, evaluate FINDCOMM to produce ${COMM}.
In arch/evbmips/Makefile, use FINDCOMM directly, because the
command-line 'echo $COMM ...' was too long.
readdisklabel(9), which are better than the evbmips disk subroutines
at finding a BSD disklabel at a different location than the evbmips
default of sector 0, offset 64. Helps me boot a RouterBOARD 153
from a CompactFlash containing both a Master Boot Record at sector
0, and a BSD disklabel at sector 1, offset 0.
from doc/BRANCHES:
idle lwp, and some changes depending on it.
1. separate context switching and thread scheduling.
(cf. gmcgarry_ctxsw)
2. implement idle lwp.
3. clean up related MD/MI interfaces.
4. make scheduler(s) modular.
Basics: the ADM5120 is a 175 MHz MIPS32 4Kc processor featuring a
6-port ethernet 10/100 switch with Auto MDI/X, a PCI controller,
USB 1.1 controller, UART, watchdog timer, eight GPIO pins, and a
multiport memory controller with both NOR and NAND flash support.
This code supports most of the devices on the ADM5120, including
the 6-port switch (each port attaches as an ethernet, admsw0 through
admsw5), the PCI controller, USB controller, GPIO, watchdog, and
UART.
Remaining work: the port includes no NOR/NAND flash drivers. No
bootloader is included. I have only tested the PCI bus driver with
the use of one PCI slot on the RouterBOARD 153. It is not possible
to exploit the capabilities of the ethernet switch using bridge(4).
I have only netbooted the ADM5120 on the RB153. Booting other
boards, and booting from flash memory, remains to be done.
Hardware availability: many low-cost routers, including the
RouterBOARD 100 series at RouterBOARD.com, use the Infineon ADM5120
processor.
Credits: Ruslan Ermilov and Vsevolod Lobko ported to the ADM5120,
and they wrote device drivers for the UART, USB controller, and
10/100 switch. Matt Isaacs brought the port up-to-date with
NetBSD-current, made it compile, and ran it first on the RB153.
I added drivers for the PCI controller, GPIO, and watchdog timer.
I produced the bus attachment for the CompactFlash slot with advice
from Mikrotik technical support and from Matt Thomas.
locators for uhub because a hub can't have sub-devices.
This might be sanity-checked eventually.
Same for ubt now after the change to device attachment.
by Slava Semushin <slava.semushin@gmail.com>.
To verify that no nasty side effects of duplicate includes (or their
removal) have an effect here, I've compiled an i386/ALL kernel with
and without the patch, and the only difference in the resulting .o
files was in shifted line numbers in some assert() calls.
The comparison of the .o files was based on the output of "objdump -D".
Thanks to martin@ for the input on testing.
- finish implementing splraiseipl (and makeiplcookie).
http://mail-index.NetBSD.org/tech-kern/2006/07/01/0000.html
- complete workqueue(9) and fix its ipl problem, which is reported
to cause audio skipping.
- fix netbt (at least compilation problems) for some ports.
- fix PR/33218.
martin