1574dad87a
* Missed that one during last commit.
1997-05-17 14:06:26 +00:00
eed1dad537
* Reorganize pc532/stand similar to the alpha and hp300 ports (by stealing
...
Makefiles and scripts from hp300/alpha).
1997-05-17 13:55:34 +00:00
e2a58b69f7
Add #define __VM_PMAP_HACK as a temporary measure.
1997-05-16 21:35:30 +00:00
9e785c6d3f
* Define proc0paddr here and not in locore.s.
1997-05-10 09:29:26 +00:00
5c6f7fca32
* Update asm.h to be more like the other port's asm.h.
...
* Update locore.s to use all the macros defined asm.h
* Update random.s to use the much nicer algorithm from the m68k port.
1997-05-08 13:44:11 +00:00
9dd24ca41c
* Print device information in md_attach_hook. Since this is a pseudo device,
...
we have to output the device name as well.
1997-04-21 16:20:39 +00:00
237a4629c4
* Somehow the definition of ieee_handler_disable got lost in my last commit.
1997-04-21 16:17:44 +00:00
7bc1bddc96
* Do not use Debugger(), use breakpoint().
1997-04-21 16:17:39 +00:00
16fbb47606
* Do only check against sd* if we did boot from a scsi disk.
1997-04-21 16:17:36 +00:00
34bffb6338
* Omit Debugger() if DDB is not defined.
1997-04-21 16:17:32 +00:00
7fe4f42d0a
* Add a comment describing movs[bdw]nu.
...
* Add breakboint().
1997-04-21 16:16:31 +00:00
5a23a56e6b
* Apply a fix from Ian Dall to reduce system load and fifo/silo overflows
...
when running at high speeds. This works by using hardware RTS again and
using the receive fifo threshold as well as the transmit fifo provided
by the sc26c92.
1997-04-21 16:16:16 +00:00
61d420149f
* Use higher timeouts for PLIP.
...
* Do some cosmetic reformatting.
* If the interface is considered dead, re-enable receive interrupts from
time to time.
1997-04-21 16:16:10 +00:00
12994a40ab
* Configure ncr*, not ncr0. That allows the user to specify flags for ncr0
...
in his config file.
1997-04-21 16:15:59 +00:00
f50c40bad5
Eliminate redundant calls to vm_map_pageable() and vm_fault(), as suggested by
...
Chuck Cranor.
1997-04-09 23:35:07 +00:00
9fea258541
* if queues have to be protected by splimp. Back out last change. Thank's
...
to Charles for watching out and notifying me about my mistake.
1997-04-04 09:51:26 +00:00
6c015f3a49
Add netatalk netisr
1997-04-03 15:59:54 +00:00
b7624c248a
* Add missing & in plipioctl.
...
* Remove some dead code in plipioctl.
* Use splnet, not splimp to protect IF_PREPEND/IF_DEQUEUE.
1997-04-02 16:36:25 +00:00
e034d53f13
* Add new sysctl "machdep.ieee_disable". This can be used to disable the
...
in kernel ieee trap handler. Then a usermode version of the code can be
used for debugging. Thank's to Ian Dall for this suggestion.
1997-04-01 16:37:43 +00:00
af88eb9d75
* Fixes from Ian Dall. Make the ieee handler compile with the new gcc warning
...
options, make it compile into a user mode library again and update the
README.
1997-04-01 16:35:08 +00:00
d0c4177d0c
* Add new sysctl "machdep.ieee_disable". This can be used to disable the
...
in kernel ieee trap handler. Then a usermode version of the code can be
used for debugging. Thank's to Ian Dall for this suggestion.
1997-04-01 16:33:04 +00:00
d89b0839dc
* Use movsdnu to copy pages.
...
* Just invalidate the tlbs for the affected mappings in pmap_zero_page
and pmap_copy_page.
1997-04-01 16:32:58 +00:00
43064ade71
* Apply optimizations suggested by gwr & mycroft.
1997-04-01 16:32:52 +00:00
6231519c48
* Initialize the icu with a table driven method again.
1997-04-01 16:32:47 +00:00
88128328a9
* Only cosmetic changes.
1997-04-01 16:32:31 +00:00
9e6c9efed8
* Initialize the icu with a table driven method again.
1997-04-01 16:32:25 +00:00
9046ff4c6f
* Initialize the icu with a table driven method again.
...
* Fix a bug in microtime that caused the generation of invalid timevals.
Thank's to Ian Dall for finding and fixing this.
1997-04-01 16:32:16 +00:00
821b15ab3b
* Add some missing casts to make this compile with -Werror when KGDB is
...
defined.
1997-04-01 16:31:53 +00:00
e2a1653bf0
* Only cosmetic changes.
1997-04-01 16:31:45 +00:00
b14adada8f
* Include <sys/systm.h> to get printf prototype.
1997-04-01 16:31:37 +00:00
8a56a74823
* Add versions of movs{d,w,b} that do not update the source and destination
...
pointers.
* Add tlbflush_entry to flush a single tlb entry.
1997-04-01 16:31:19 +00:00
b78841616b
* Add prototype for icu_init.
...
* Add new sysctl "machdep.ieee_disable". This can be used to disable the
in kernel ieee trap handler. Then a usermode version of the code can be
used for debugging. Thank's to Ian Dall for this suggestion.
1997-04-01 16:31:14 +00:00
b3d60fed7c
* Add -Werror again.
1997-04-01 16:30:48 +00:00
6228d0c501
* Add Cabletron EA412/EA419 driver.
1997-04-01 16:30:35 +00:00
cb24b0200a
Don't allocate mclrefcnt[]; it's dead and gone.
1997-03-27 21:01:20 +00:00
37b247edde
Renames: /dumpconf/cpu_dumpconf/, /boot/cpu_reboot/
1997-03-26 22:42:13 +00:00
71e43d14ab
Move findroot/setroot stuff from configure() to cpu_rootconf().
1997-03-26 22:38:40 +00:00
bf4354241e
* Use machine/conf.h instead of sys/conf.h to get the
...
lpt{open,close,write,ioctl} prototypes.
* Remove the cdev_decl(lpt). We get it from machine/conf.h.
* Add and use LPTSOFTC.
* Use level triggered interrupts (seems to work with less spurious interrupts).
* Do not use NLPT. Use lpt_cd.cd_ndevs to get the number of lpt devices.
* ether_ifattach now needs the ethernet address of the device. Supply a
dummy address.
1997-03-22 08:29:52 +00:00
80f02e3d99
DEV_RTC is gone.
1997-03-22 08:29:48 +00:00
b75d400dd2
DEV_RTC is gone.
...
Remove uk driver, add se driver.
1997-03-22 08:29:45 +00:00
e436eab8ea
DEV_RTC is gone.
1997-03-22 08:29:41 +00:00
62e4baf13e
Add softnet prototype.
1997-03-22 08:29:19 +00:00
86855546de
Do intr_init and intr_establish for softclock and softnet in mbattach.
1997-03-22 08:29:01 +00:00
c532db2665
* Include if_inarp.h and not if_ether.h.
...
* Include arp.h instead of ether.h.
* Remove softnet prototype. It is in cpu.h now.
* Remove calls to intr_init and intr_establish for softclock and softnet.
This is done in the mainbus attach routine now.
* Remove impintr. This seems to be dead.
* Add natmintr :-)
1997-03-22 08:28:59 +00:00
282907668f
Don't hardcode the name of the clock device. Use dv_xname.
1997-03-22 08:28:56 +00:00
92f94ebec2
That shouldn't get deleted. I wanted to delete icuinit.c, not intr.c.
1997-03-21 08:34:57 +00:00
4c63b60bae
intr.c
1997-03-21 08:31:59 +00:00
0f3c811db6
* Remove the unused variable fsr in ieee_invop.
1997-03-20 12:04:08 +00:00
a366400675
* clock and rtc are real devices now.
1997-03-20 12:03:27 +00:00
5efc40089c
* Add new file arch/pc532/pc532/mainbus.c.
...
* Remove arch/pc532/pc532/icuinit.c.
* clock and rtc are real devices now.
* Change all uses of needs-count to needs-flag.
1997-03-20 12:03:24 +00:00
matthias