not support a value (e.g., it's to be used as "options FOO" instead of
"options FOO=xxx"). options that take a value were converted to
defparam recently.
- minor whitespace & formatting cleanups
o Add devices from OpenBSD
o Minor sorting problems in my sorting attempt.
o A few additional -1 vendors for better card pattern generation.
o Add Zoom Air_4000 (needs to be added to awi)
o Add Netgear FA411 info (needs to be added to ne, plus quirks/fixes
to base pccard stuff before it will work).
o Merges through FreeBSD 1.22
of my Xircom RealPort Ethernet 10/100 + Modem (REM56G) work.
The modem part is still not usable (this would need some PCMCIA magic that
I don't know how to do; see my message to tech-kern on Oct 07).
Change to pcmcia_cis.c from OpenBSD.
I checked that this doesn't break a 3com 3C562D (ethernet+modem) which I
also have.
time. Vendors are sorted by number. Vendors are grouped
alphabetically, with entries within a vendor's group arranged
numerically. CIS entries sorted alphabetically by identifier.
I have a weird PC-card-style appliance (I'm not sure I may call it a PC card)
whose ``CIS'' reads zeros forever, which caused kernel panic.
For your interest, it is a cooling fan to be inserted to a PC card slot.
if_ieee80211subr.c, which can be shared between any IEEE 802.11
drivers.
However, most of current working IEEE 802.11b wireless LAN cards
have rich firmware and we cannot have a control to management frames
for such cards.
IBSS creation is now supported for the awi driver.
* teach it to read the MAC addr from the correct place (from OpenBSD)
* change order of intr_dis/establish() and function_en/disable() to
avoid panics on this multifunction card due to the CCR window
not being mapped in intr_dis/establish()
- data alignment fix
- kludge around broken multicast by using promisc mode
(IPv6 router solicitation now works)
- add support as random source
- support device power-up and power-down
- vlan support
- misc. comment and style fixes
Roaming mode can change value into 'firm mode' and disable.
Authentication mode can change into 'Open System authentication'
and 'Shared Key Authentication' with Prism2 chip.
wi_get_id() was introduced in order that chip might judge automatically
whether it is Prism2 chip. Therefore, a pp_prism2 entry in
"struct wi_pcmcia_product" became unnecessary.
This is a completely rewritten scsipi_xfer execution engine, and the
associated changes to HBA drivers. Overview of changes & features:
- All xfers are queued in the mid-layer, rather than doing so in an
ad-hoc fashion in individual adapter drivers.
- Adapter/channel resource management in the mid-layer, avoids even trying
to start running an xfer if the adapter/channel doesn't have the resources.
- Better communication between the mid-layer and the adapters.
- Asynchronous event notification mechanism from adapter to mid-layer and
peripherals.
- Better peripheral queue management: freeze/thaw, sorted requeueing during
recovery, etc.
- Clean separation of peripherals, adapters, and adapter channels (no more
scsipi_link).
- Kernel thread for each scsipi_channel makes error recovery much easier
(no more dealing with interrupt context when recovering from an error).
- Mid-layer support for tagged queueing: commands can have the tag type
set explicitly, tag IDs are allocated in the mid-layer (thus eliminating
the need to use buggy tag ID allocation schemes in many adapter drivers).
- support for QUEUE FULL and CHECK CONDITION status in mid-layer; the command
will be requeued, or a REQUEST SENSE will be sent as appropriate.
Just before the merge syssrc has been tagged with thorpej_scsipi_beforemerge
saves about 2.2MB under /usr/include/dev/. Discussed on tech-kern@
recently.
I HOPE to get the list right. The headers I left in are ones
used for MI tools and those whose usage I discovered by grep over tree sources.
Feel free to put needed includes back in if you encounter anything which
should not be removed from lists.
This now provides slightly more functionality than the FreeBSD layer1-newbus
interface. It was meant to be a simple change to one header and a few
c files, but the change rippled all through various stuff.
To prevent a change to the kernel<->userland interface right now the kernel
is now lying about card types to userland (but who cares). This will be fixed
when the userland interface changes, after layer 3 <-> layer 4 has been
fixed.
Functional changes:
Provide a clean interface for hardware drivers to attach to the upper
layers. This will need another small change in the B-channel handling
when a similar change to the layer 3 <-> layer 4 interface happens.
Avoid passing indices into global arrays of pointers around, instead pass
the pointers itself. Don't code hardware driver types by predefined magic
numbers (think LKM). Prepare for detachable drivers (think pcmcia).
While there remove some sets of function pointers always pointing to the
same function (meant to be the configurable set of D channel protocol
handlers). It is unlikely another supported D-channel protocol will fit into
that (maximal layer interface) abstraction. When we get support for another
protocol, we will need to come up with a workable interface. Besides, the
old implementation was, uhm, strange.
remove all (legacy) "i4b_" prefixes outside of sys/netisdn.
Prefix all card specific driver support files with the basename
of the driver bus attachement file.
Renamed here:
i4b_isic_pcmcia.c -> isic_pcmcia.c
i4b_isic_pcmcia.h -> isic_pcmcia.h
i4b_avm_fritz_pcmcia.c -> isic_pcmcia_avm_fritz.c
i4b_elsa_isdnmc.c -> isic_pcmcia_elsa_isdnmc.c
i4b_elsa_mcall.c -> isic_pcmcia_elsa_mcall.c
i4b_sbspeedstar2.c -> isic_pcmcia_sbspeedstar2.c
Don't allocate one large io range, this fails about every time on real
pcmcia buses (not attached to pci/cardbus bridges) because of other
devices interfering in that range. Use the bogusly small region for
now, which works purely by chance (map granularity) on cardbus bridges
too (more or less).
XXX - make this map three different, small regions after layer1 <-> layer2
XXX interface has been brought in shape.
places into the CIS reading code.
The card in question has IO8 only enabled in its CIS info and is apparently
not able to keep up with quick reads. It words fine in a pcmcia slot but
panics(!) the kernel in a TI 1250 cardbus slot. This may be a failure of
the pci cardbus code when initializing this bridge. When finding (and
fixing) that, we should back this change out.
The card I am testing with is not broken, I have multiple versions of it
(AVM Fritz! pcmcia ISDN card), all work fine on windows and all cause
us to panic because of bogus CIS info read.
XXX - panicing because of bogus CIS data is probably another error.
errno otherwise). Actually use that return value to avoid installing an
interrupt handler (possibly sharing an interrupt with other cards!) and
initialising the softc with bogus/half baked values.
established.
XXX real fix: make enable/disable for real and invoke them when needed.
XXX This has to wait until the layer 1 <-> layer 2 interface is
XXX restructured.
This is not unprecedented, as we do it in >100 places in the tree.
If you disagree with this philosophy, take it to tech-kern for a discussion
FIRST before reverting; TNF, not one particular person, owns this file.
o Add NAKAGAWA METAL's LNT-10TN card.
o Add KINGSTON KNE-PC2 ethernet card.
o Add RATOC REX_R280 card.
o Add $FreeBSD$ id.
I've not added these cards the their respective drivers, however.
XXX I think we should have if_ne_pcmcia.c try to allocate I/O addresses
around 0x300 or we'll end up with a lot of quirks for NE2k based
cards which have bad CIS's.
be attached with this flag.
Some CF Card (for ex. IBM MicroDrive and SanDisk) doesn't seem to implement
drive select command. In this case, you can't eliminate ghost drive properly.
So you should use this flag to ignore the ghost by force.
This is the kernel part (userland to follow soon) of the latest (and
very probably last) release (version 0.96) of ISDN4BSD. ISDN4BSD has a
homepage at http://www.freebsd-support.de/i4b/.
It gives the user various ways to use the isdn connection: raw data (via
the i4brbch "raw b-channel" device), ppp (via the isp "isdn PPP" device),
voice/answering machine (the i4btel "telephone" device) and ip over isdn
(the ipr device, "IP over raw ISDN").
Supported are a bunch of common and older cards, more to be added soon
after some cleanup. Currently only the european E-DSS1 variant of the
ISDN D channel protocol is supported.
timeouts).
stop driver after suspend.
XXX: should use command interrupt but no document...
XXX: status update sometimes failed perhaps due to collision.
(RID 0xff50 or 0xff68 access failed)
No vendor ID, no product ID, and the wpp_cis_info is 'PCMCIA', 'CD-ROM'.
I'd be encouraged at some progress towards 'generic devices', except
someone else is bound to produce something that identifies the same, but
requires a quirk. Can I go back to my sparc now?
Make two other comments consistent while here.
Though ifconfig -m no longer show 5Mbps/11Mbps for PC4500 by this fix,
I cannot find how to set fixed transmit speed to the firmware.
FreeBSD version of driver apparently ignore the value set by ancontrol(8).
This is very adhoc work for IETF meeting.
- Since it seems that 'an' and 'wi' have similar hardware, low level
functions should be shared.
- There are PCI/ISA cards of Aironet but not supported yet.
- The wiconfig interface is changed so that wiconfig cannot be used.
- 'ancontrol' of FreeBSD is not ported.
- Only infrastructure mode is tested.
- WEP is not supported.
Though I only have an Aironet card, Cisco card should be expected to work.
- Doesn't fail ne_pcmcia_attach() if ne_pcmcia_ax88190_set_iobase() failed.
- Check whether LIOBASE register is writable or not (dirty hack!).
Fix PR. 11285
when sharing an interrupt with other devices:
check sc->sc_enabled, and drop the interrupt if its' off.
Also check for IFF_RUNNING, on advice of Enami Tsugotomo.
instead of addr1 and addr2. THis means that tcpdump -e will show the
correct MAC address for communications with access points instead of showing
the BSSID.
In the future there should be 802.11 support for bpf/libpcap/tcpdump,
but that is aways down the road.
Also fix a typo in a comment.
soren