e6dde2bd42
Add MII support to smc91cxx driver. This is supported for the 91c100
...
and 91c100FD (FEAST) controllers. Existing controllers should continue
to work as they have. Added the card's memory to the probe message.
2000-07-30 21:34:47 +00:00
457d8d7c7e
print parent device name too, so we know which socket a card was probed at
...
and whether pcmcia or cardbus
2000-07-28 19:17:02 +00:00
188122248a
I've confirmed that Samsung MagicLAN SWL-2000N (PRISM-II) works
...
with WEP enabled.
2000-07-26 07:28:56 +00:00
cc8e6675e2
add Samsung MagicLAN SWL-2000N
2000-07-26 07:24:15 +00:00
27d41a1de3
Map txrate for prism2, where each bit is apparently assigned to the
...
corresponding rate; 1Mbps, 2Mbps, 5.5Mbps, 11Mbps.
2000-07-25 12:04:29 +00:00
5463f7b316
Improve the model identification and match. Addresses PR-10485.
2000-07-24 21:50:10 +00:00
b023fdd2b7
Regen.
2000-07-24 21:47:40 +00:00
0f37cacaf1
Add entries for all Xircom ethernet models.
2000-07-24 21:45:00 +00:00
afa5b645c2
add support for SIOCS80211NWKEY and SIOCG80211NWKEY.
2000-07-21 04:48:55 +00:00
c9355a957c
Add the pccard controller for a Toshiba Portege drive. No vendor ID, no
...
product ID, and in this temporary loan, no bleeding power supply so it
can only probe the controller and not the drive. Still, its something.
2000-07-20 23:20:01 +00:00
47f692248f
add WEP support also for PRISM2 cards.
...
Corega works fine with WEP, but farallon doesn't work well with WEP for now..
2000-07-18 15:01:55 +00:00
905b4e497f
Add support for Corega Wireless LAN PCC-11, and Farallon SkyLINE 11Mb.
...
Note that Corega card works at 3.3V only, then it requires cardbus code
for now.
2000-07-18 14:53:26 +00:00
4a2a3bf091
Add Farallon SkyLINE 11mb card as Intersil Prism2
...
vendor:product of the card is Lucent:WaveLAN, and CIS string shows
"INTERSIL" "HFA384x/IEEE"...
2000-07-18 14:48:10 +00:00
ceafcbd834
apply Kenji Aoyama <aoyama@nk.mcu.or.jp>'s patch
...
on port-hpcmips-ja@jp.netbsd.org Mon, 10 Jul 2000 21:21:47 +0900
FIX:
Can't read CIS tuple chain:some TDK CF Flash memory card.
2000-07-14 08:02:12 +00:00
e93c7e8dd2
typo. From: jdolecek
2000-07-05 18:47:51 +00:00
5f1c4bb519
use memory mapped address, instead of i/o memory access, for control
...
registers. rationale:
- Netwave cards choke if we map i/o memory to >= 0x400
- even though, CIS tuple talks nothing about it
- it is not possible to specify range in pcmcia_io_map
- it would be very bad to do a try-and-error bus_space allocation for
i/o memory regions < 0x400
- we can have exactly the same functionality with memory mapped access
this should correct PR 10139.
the memory mapped access idea was from WIDE wildboar/bsdi cnw code.
2000-07-05 18:42:19 +00:00
807a12c8cd
change the argument of SIOCS80211NWID and SIOCG80211NWID ioctls from
...
u_int8_t array to struct ieee80211_nwid to prepend length field.
The length field is necessary because IEEE 802.11 spec doesn't prohibit
even '\0' for SSID.
Though the name and the value of SIOC... macro is unchanged, this change
breaks binary compatibility. The only affected userland program on the
tree is ifconfig(8).
As Jason suggested on tech-net, it is better than live with problems
since there are no releases for this ioctls yet.
2000-07-05 02:35:53 +00:00
af32c63489
remove unneeded include "opt_awi.h"
2000-07-05 02:27:25 +00:00
793eb28211
Support WEP functions for awi driver.
...
arc4 implementation by Kalle Kaukonen has been added.
define "wlan" in files.
XXX: only awi depends on wlan for now.
Allow authentication for adhoc (IBSS) mode.
Disable adhoc mode without bssid (mediaopt adhoc,flag0) for FH radio.
FH cannot work without synchronization by beacons.
Align IP header for ethernet encapsulation (IFF_FLAG0) mode.
Print available access points for IFF_DEBUG.
2000-07-04 14:27:56 +00:00
5f9b72f44c
match 3Com 3CRWE737A (AirConnect)
2000-06-30 16:40:31 +00:00
c8edea398b
regen
2000-06-30 16:33:38 +00:00
35c8e4d91e
add 3Com 3CRWE737A (AirConnect)
2000-06-30 16:33:17 +00:00
261538ecac
remove include of <vm/vm.h>
2000-06-28 16:39:25 +00:00
d157be73ff
Update from Onno: add media selection.
2000-06-14 22:54:37 +00:00
0ea5e0720a
IBM Tropic Token Ring PCMCIA attachment. XXX Needs work.
...
Many thanks to Onno van der Linden for his help in getting this working.
2000-06-13 20:03:47 +00:00
a6c8d6231e
Regen.
2000-06-13 02:18:19 +00:00
d15c2a6a04
Include vendor name for IBM products.
2000-06-13 02:18:00 +00:00
7b45a44396
Add Farallon SkyLINE Wireless LAN Card for awi(4) driver.
...
Tested on FreeBSD 3.4-RELEASE by Dirk-Willem van Gulik <dirkx@webweaving.org>.
2000-06-09 13:05:02 +00:00
f44d7a9a53
Rename remaining references from xe to xi. Clean up debug messages.
2000-06-09 08:22:13 +00:00
4da3935bae
cleanup haeders.
...
add opt_awi.h to define AWI_DEBUG, AWI_WEP_ARC4.
show the firmware version at attach.
create a framework to support WEP (encryption code is not included for now).
a new wiconfig compatible ioctl interface replaced the awictl interface.
fix memory leak in selecting AP
fix bugs in ESSID selection
changes from FreeBSD-current by Warner Losh:
revision 1.2
date: 2000/04/17 22:58:15; author: imp; state: Exp; lines: +16 -1
Provide mem* for compat with NetBSD to fix LINT
fixes from FreeBSD-current by Guido van Rooij:
revision 1.4
date: 2000/05/29 19:58:10; author: guido; state: Exp; lines: +5 -2
Fix a panic resulting from an obvious null pointer deref.
Apparently some other panics still exist in this driver, but with
this fix, it was at least possible to run the Nokia card at SANE 2000.
2000-06-09 05:31:15 +00:00
f0d0078f1b
Add Olicom GoCard.
2000-06-06 17:19:59 +00:00
4b7ec26c89
One comment too much..
2000-06-06 16:16:36 +00:00
c4df411abd
Add comments for a few drivers and the lines for the Tropic attachment.
2000-06-06 16:15:31 +00:00
e1e9261889
fix typo
2000-06-06 14:01:40 +00:00
fc43b2daa3
Replaced by xi(4).
2000-06-05 23:21:35 +00:00
3129070fd6
New driver for Xircom CreditCard PCMCIA Ethernet. Replaces xe driver which
...
didn't work. Renamed to avoid clash with next68k network driver.
2000-06-05 23:14:22 +00:00
63ce2b1954
Clean up usage of XIRCOM/TDK identifiers.
2000-06-05 23:06:31 +00:00
923b803b77
Regen.
2000-06-05 23:05:30 +00:00
b1cff781b9
- Clean up XIRCOM entries
...
- Add entry for Xircom CreditCard Ethernet + Modem 28
- Add entry for Intel EtherExpress PRO/100
- Add entry for Compaq Netelligent 10/100 Ethernet
2000-06-05 23:04:04 +00:00
5138b1b1bb
Well, this is esp_pcmcia, not esp_pci.
2000-06-05 15:36:45 +00:00
a12331c461
Oops, struct scsipi_adapter was changed recently.
2000-06-05 15:19:42 +00:00
8c4d1bf1f9
Adapt MI ncr53c9x changes.
2000-06-05 15:08:00 +00:00
1e59d99d28
For all network drivers that call ether_ifattach(), and also
...
have _detach() functions:
Ensure that softc keeps state about whether the attach succeeded,
and make the detach function return immediately if the attach did
not complete.
2000-05-29 17:37:12 +00:00
4bfbc7641d
Recognize the DE-650 with another vendor/product pair and OUI.
2000-05-25 17:21:48 +00:00
37cc37ead2
correct pcmcom detach (like card removal). PR 9334.
2000-05-24 03:44:46 +00:00
28ec465498
Remove $Id.
2000-05-23 08:41:49 +00:00
f87f33d513
Allow userland to retrieve whether the card support WEP while the
...
card power is off. This allows wiconfig to set WEP key etc while power off.
2000-05-23 08:25:51 +00:00
b7c3dc6d20
Recognize more models of the IBM card. From PR 10137.
2000-05-23 02:55:19 +00:00
769cc65919
Free memory when failed to map it.
2000-05-15 08:08:12 +00:00
01f1223f94
Cosmetic changes.
2000-05-15 07:57:19 +00:00
ac9d663468
My (Cabletron) card supplies two more statistics counters.
...
Instead of dropping them all, read out min(expected, supplied).
2000-05-14 17:19:18 +00:00
4d65db2d97
RATOC REX-R280 (another if_mbe_pcmcia card) support by UCHIYAMA Yasushi.
...
Originally part of pr 6789, reworked by the submitter to fit into -current.
2000-05-11 19:24:35 +00:00
fd36bc02a6
Swap the order of disabling the function and disestablishing the interrupt
...
on detach. This avoid accessing unmapped registers on multi-function cards.
2000-05-08 13:53:32 +00:00
621323af72
KNF some comments.
2000-05-08 13:51:36 +00:00
8ec60a189f
Make sure the payload is aligned when using E2-over-802.11 encapsulation,
...
as enabled by the LINK0 flag. Fixes PR kern/9700.
2000-04-22 22:36:14 +00:00
5c507c46b5
regen
2000-04-17 12:01:20 +00:00
4f797c7b55
Panasonic KXLC003
2000-04-17 12:00:35 +00:00
d5d6c20e74
Regen
2000-04-12 21:13:12 +00:00
e083abcad8
Add support for the SOHOware PCMCIA Ethernet card, model ND5100-E.
...
This seems to be a re-badged NDC (National Datacomms. Corp) card.
It needs a quirk entry due to lack of manufacturer tuple in the CIS.
For some reason, the 'Tx/Rx' LED on the connector module is inverted
such that it is off during network activity...
2000-04-12 21:07:55 +00:00
3b69a8011b
make it compile again after ATAPI changes.
2000-04-01 17:52:14 +00:00
169ac5b3c1
Remove register declarations.
2000-03-30 12:41:09 +00:00
c522067861
Maintain IFF_ALLMULTI flag by ourself.
2000-03-27 11:03:47 +00:00
8d29747e3b
When we fall into allmulti case due to too may multicast address,
...
properly set the type and length in struct wi_ltv_mcast.
2000-03-27 07:04:21 +00:00
19e7b1b8ae
No need to call wi_setmulti() if ether_{add,del}multi returns 0.
2000-03-27 06:48:05 +00:00
8abfe24915
Cast timeval members to types we know the printf conversions of.
2000-03-26 20:24:12 +00:00
240cf24ebd
regen (sorry forgot to do separate commit for them)
2000-03-26 10:31:19 +00:00
74846d31f5
add CIS for Corega Wireless LAN PCC-11 (no driver support yet)
2000-03-26 10:24:51 +00:00
9100212ef0
Add a "sc_rev" member to ncr5380_softc and handle CXD1180 quirk
...
in MI ncr5380sbc.
2000-03-25 15:27:54 +00:00
fc96443d15
New callout mechanism with two major improvements over the old
...
timeout()/untimeout() API:
- Clients supply callout handle storage, thus eliminating problems of
resource allocation.
- Insertion and removal of callouts is constant time, important as
this facility is used quite a lot in the kernel.
The old timeout()/untimeout() API has been removed from the kernel.
2000-03-23 07:01:25 +00:00
bcb26b717f
Add the Nokia C020 WLAN card.
2000-03-22 22:33:47 +00:00
b6a2605ef2
Regen.
2000-03-22 21:41:48 +00:00
86151f6ec3
Add the Nokia C020 WLAN card.
...
(`Guess who Charles works for...')
2000-03-22 21:39:57 +00:00
5644a7e248
Update awi driver, which now supports AMD 79c930 based 802.11 DS cards
...
as well as 802.11 FH cards. Also, it can operate in infrastructure mode,
adhoc mode, and wi(4) (aka WaveLAN/IEEE) compatible adhoc mode.
2000-03-22 11:22:20 +00:00
282dcaac92
Regen.
2000-03-20 18:39:52 +00:00
a28ca8f97e
Add support for RPTI-EP400 PCMCIA network adapter. Patches supplied by
...
Tim Walls in PR kern/9644.
2000-03-20 18:39:32 +00:00
634d0c9744
Oops; fix a slight biff in the PIO input routine.
2000-03-20 06:01:11 +00:00
553896782a
Cosmetics. ( 0x80 -> NCRSTAT_INT )
2000-03-20 03:49:22 +00:00
df8c3f5ceb
Interrupts work now. Woohoo.
2000-03-20 00:53:17 +00:00
f1ebad18a4
Add esp_pcmcia. For the moment it's polled, since interrupts don't seem to be
...
working.
2000-03-19 21:54:01 +00:00
9dd3a0973d
This turns out to be the wrong interface for what I needed -- but I'll leave
...
the code here for now.
2000-03-18 21:11:16 +00:00
03dddfc09e
Preliminary support for 53c40x-based cards. Needs some more work.
2000-03-18 17:59:52 +00:00
302a1bd362
Regen.
2000-03-18 15:01:33 +00:00
2ab04a0400
Add the Panasonic 4X CD-ROM Interface CArd.
2000-03-18 15:00:31 +00:00
9eb76252d0
Regen.
2000-03-16 16:48:59 +00:00
8a8e062c16
cards for if_awi:
...
Add AirSurfer Pro
Change the name for AMD Am79C930. The same CIS strings are used
both for Melco WLI-PCM and NTT-EL SS Magic.
2000-03-16 16:38:41 +00:00
49389b9817
tabbing consistency on the 3c1 entry
2000-03-13 23:36:02 +00:00
5402c76d3e
add an entry to the product table for the 3C1. This seems to work,
...
at least as necessary to pull out the MAC address, etc. Not actually
tested xmit & rcv yet.
2000-03-13 20:32:28 +00:00
8409d84d62
regen
2000-03-13 20:31:23 +00:00
00a2570a2e
Add 3com Megahertz 3C1 10Mbps LAN CF+ Card
2000-03-13 20:30:24 +00:00
cf32e2713c
Adopt the macro name change of if_ieee80211.h.
...
also fixed the value for receiving packets in infrastructure mode,
while no one has been tested with.
2000-03-10 05:47:42 +00:00
91c44a72b8
Set ifp->if_baudrate as appropriate.
2000-03-06 21:02:37 +00:00
a6f861574a
No longer necessary to futz with ifp->if_baudrate here.
2000-03-06 21:02:00 +00:00
68484a4ad9
- Remove redundant assignment.
...
- Don't disestablish shutdown hook if we can't establish it.
- Noneed to manage resouces individually.
2000-03-06 10:31:27 +00:00
e924f6f853
Minor cleanups.
2000-03-02 10:29:22 +00:00
48721f291a
Fix typo and thinko in previous commit.
2000-03-02 05:54:22 +00:00
027db8bf87
Add ifmedia support so that dhcp happy. Also, add nwid support.
2000-03-02 05:00:47 +00:00
17f933f6ce
Add missing break that hosed multicast.
2000-02-28 06:44:52 +00:00
8841a11f4d
- Disestablish an interrupt if failed to enable the card.
...
- If card isn't enabled, just set given information into softc. Addresses
PR#9457.
- Some cleanups and cosmetic changes.
2000-02-27 23:10:51 +00:00
45b36632c0
Add code (off by default) to keep track of the signal strength of the last
...
few packets received from different MAC addresses.
2000-02-27 20:40:42 +00:00
20e5cfa32f
Billionton Systems Inc. LNT-10TN card.
2000-02-27 11:15:47 +00:00
d386caeaec
regen.
2000-02-27 11:14:43 +00:00
663c327808
Add Billionton Systems Inc. LNT-10TN NE2000 Compatible card.
2000-02-27 11:14:03 +00:00
16c31080a5
IT8368E legacy mode requires mode change between I/O access and
...
attribute memory access. XXX
2000-02-26 19:02:22 +00:00
beecfd4814
cnw is 8bit-only card. map memory region as 8bit only.
...
(there are so many 8bit-only card fixes. don't we have some hint on cis tuple?)
From: feico
2000-02-26 05:34:43 +00:00
dcfbcbec76
remove bogus debug (was reading unmapped CCR)
2000-02-22 21:29:36 +00:00
bfaa657135
Fix printf formats on the Alpha.
2000-02-22 08:23:22 +00:00
158df7b6f1
Don't establish an interrupt if attach is in progress. Anyway, current wdc
...
and its children doesn't require interrupt on attach.
2000-02-21 03:55:22 +00:00
91026fe7f2
Cosmetic changes.
2000-02-21 03:26:41 +00:00
6779fc2bb2
Fix thinko in previous commit.
2000-02-20 03:48:40 +00:00
ac75116d32
Try other config entry on i/o space alloc failure.
2000-02-20 03:18:15 +00:00
7adb22cfa5
Add detach support.
...
Light cleanup.
2000-02-17 15:58:32 +00:00
4a1320b29f
Put the entry of FNW-3700T after the entry of SVEC-PN650TX
...
so that SVEC-PN650TX errornously recognized as FNW-3700T.
Pointed out by Takahiro Kambe <taca@sky.yamashina.kyoto.jp>.
2000-02-14 23:13:49 +00:00
99b18eac36
on attach, check if we've got meaningful mac address or not,
...
to detect io mapping problem.
on detach, handle resource deallocations more carefully.
2000-02-13 06:17:58 +00:00
84b6105bbe
Check if device is active in wi_intr and wi_inquire.
2000-02-12 23:35:28 +00:00
53e6733789
awi is an 8-bit only card, so set the 8bit flag.
2000-02-12 19:58:35 +00:00
02bf7fcd13
add wi_detach and friends so that we can hot-swap wi card.
2000-02-12 16:08:04 +00:00
d8595b9af3
map common memory 8 bit for cis scan when following longlinks.
2000-02-10 09:01:52 +00:00
e00270524e
ASIX AX88190 support (Planex FNW-3700-T and Melco LPC3-TX) from FreeBSD/PAO3.
2000-02-09 15:40:23 +00:00
67bc20747a
Support Xircom CompactCard Ethernet CFE-10.
2000-02-09 14:54:53 +00:00
99f529f0b3
- Since all resources are mandatory, no need to manage individually.
...
- KNF some code.
- Factor out some code into function.
- Disestablish an interrupt handler when failed to enable card power.
2000-02-09 14:42:33 +00:00
dc87f2899f
- No need to keep track enable/disable state here. The smc91cxx.c also
...
manages it.
- Disestablish an interrupt when failed to enable card.
- Don't say I'm enabled if failed to enable card.
2000-02-09 13:40:42 +00:00
94a6dd9169
Regen.
2000-02-09 13:33:22 +00:00
947c0fee74
Add an entry for Planex FNW-3700-T.
2000-02-09 13:32:23 +00:00
e729d284ad
Add an entry for Melco LPC3-TX.
2000-02-09 13:20:55 +00:00
e92b285eaf
Add an entry for Xircom CompactCard Ethernet CFE-10.
2000-02-09 13:07:45 +00:00
1658944ebe
- Don't rely on implicit declaration.
...
- Sinc wi/ existing coding style.
2000-02-08 12:51:30 +00:00
c7573d517e
- Bail out from attach stage if failed to enable card, number of iospace
...
or memspace is unexpected, failed to map iospace or failed to configure
the controller properly.
- Disestablish an interrupt handler if failed to enable card.
2000-02-08 12:49:12 +00:00
a534cd4254
Correct John Markus Bjørndalen's horribly mangled name in a comment.
2000-02-07 09:40:37 +00:00
a8365d0e29
Use pcmcia_devinfo().
2000-02-07 09:36:27 +00:00
e2ab50484b
Add a pcmcia_devinfo() function (akin to pci_devinfo). It generates a
...
string suitable for printing in the attach message.
2000-02-07 09:35:29 +00:00
958e687d69
LP64 printf fixes.
2000-02-05 20:02:42 +00:00
645c869160
Add detach support for ethernet portion.
2000-02-05 04:44:00 +00:00
9267b8f018
Remove unnecessary includes.
2000-02-05 04:41:49 +00:00
730f15bb19
Free resources on attach failure.
2000-02-04 09:31:07 +00:00
82235a8673
Actually, no need to keep track of sc_ih.
2000-02-04 09:30:28 +00:00
2a1352a5b3
enable the card before establishing the interrupt to avoid being called
...
with stray interrupts before we are ready.
clear the card interrupt after enabling the card
2000-02-04 08:45:41 +00:00
59db45db2a
bring over WEP mode from FreeBSD/OpenBSD
2000-02-04 07:48:29 +00:00
4a5667f967
undo part of the previous commit. I'll just steal the code from freebsd,
...
to minimize differences between the drivers.
2000-02-04 06:22:52 +00:00
af9710cf6e
Disestablish an interrupt if failed to enable the card.
2000-02-04 04:54:51 +00:00
6f28840935
Remove no longer necessary old code.
2000-02-04 03:40:00 +00:00
3ff6804bdd
Release the resource on attach failure.
2000-02-04 03:38:06 +00:00
de4f36ae63
Add encryption structure definitions -- it's interesting tht the gold card
...
has 128 bit encryption, but the key space is 14 * 8 bits, or 112 bits...
I wonder where the other 16 bits comes from?
2000-02-04 02:03:02 +00:00
942a54e0c1
replace the *_lookup table entry match/lookup functions in all of
...
these drivers with a single common function (which supports tables
of variable-sized structures). Things are mostly as they were before:
tables are terminated by entry with NULL name, etc. There's also
the ability to call a driver-specific match function which can be used
to augment the table lookup.
2000-02-04 01:27:12 +00:00
71d64756c2
wrap optimized copy routines in an ifdef
2000-02-03 21:27:35 +00:00
d6df5ce334
Make the product lookup table driven.
2000-02-03 08:52:21 +00:00
f1ce315cc0
Regen.
2000-02-03 08:26:33 +00:00
fc92de5f92
Add an entry for Icom WAVEMASTER SL-200.
2000-02-03 08:25:55 +00:00
a5dc628e12
manipulate packet counters, support detach, and add commented out code to
...
DTRT on suspend
2000-02-02 18:39:44 +00:00
eed75dbc26
Don't dry to diving MIIF_NOISOLATE in the PHY drivers. Instead, pass
...
flags down from the parent to child vi mii_attach().
2000-02-02 17:09:38 +00:00
b2cac6e684
if_detach for sm/pcmcia.
...
with addition of resource allocation flags in softc (to DTRT on detach).
2000-02-02 16:04:40 +00:00
7a7a3bcfdf
handle attach failure in ne/pcmcia more carefully. (otherwise we'll
...
have trouble on detach)
2000-02-02 13:06:15 +00:00
7aa608e563
handle attach failure in more detail. make sure to
...
pcmcia_function_disable() on failure.
2000-02-02 13:02:56 +00:00
4e1b4b724b
implement cnw_detach.
...
XXX it looks that whenever there's error-return in xx_attach,
we need to have some check in xx_detach(). otherwise, routines such as
ether_ifdetach() will be called without call to ether_ifattach().
2000-02-02 12:25:13 +00:00
f4e8883ccd
use a bit more standard (sys/device.h) prototype for {dp8390,ne2000}_detach().
2000-02-02 11:41:56 +00:00
2b4766a6b2
enami's fix to dp8390 did the trick, it does not hang up any more.
...
enable detach routine by default.
2000-02-02 11:17:32 +00:00
17f5887294
implement if_detach code for ne/pcmcia.
...
XXX still incomplete, ne_pcmcia_detach() commented out for safery - please test
2000-02-02 10:00:06 +00:00
a909d816d2
Add detach support.
2000-02-02 09:34:51 +00:00
82559ba682
Move detach operations around a little to simplify (and perhaps get it
...
right?). Prompted by Jason, itojun and myself.
2000-02-02 08:41:00 +00:00
4a6ae7bdfc
Get rid of shutdown hook and attached media on detach.
2000-02-02 08:08:50 +00:00
84dc99fdea
Bring some order to the chaos which was the MII code function naming
...
"conventions".
2000-02-02 08:05:26 +00:00
ea45df4d30
Make sure to get rid of shutdown hook and ttach media on detach.
2000-02-02 08:00:21 +00:00
af1d56129f
wrap bpfdetach() with NBPFILTER > 0.
2000-02-02 07:47:33 +00:00
0151072444
Make ep driver detachable.
2000-02-02 07:23:28 +00:00
2c371af454
Make ray driver detachable.
2000-02-02 07:22:06 +00:00
11264e95ef
Regen.
2000-02-01 10:21:00 +00:00
ad68157d83
Add an entry for Melco WLI PCM (but driver isn't available yet).
2000-02-01 10:19:51 +00:00
25b484e01a
Pass an appropriate value as alignment (0 is not such a value).
2000-02-01 10:12:04 +00:00
d549d0992b
Rearrenge code a bit for the sake of another device.
2000-02-01 10:00:41 +00:00
db644f36ea
Cosmetic changes.
2000-02-01 08:58:25 +00:00
98ba9b6a65
Sync awi_pcmcia_get_enaddr with mbe_pcmcia_get_enaddr.
2000-02-01 08:52:05 +00:00
f06ba20199
RCS Id police.
2000-02-01 08:43:25 +00:00
82cf6568cf
Sync wi/ if_wavelan_ieee.h version 1.4 of FreeBSD.
2000-02-01 08:23:37 +00:00
19aa9f2cbb
The workaround for Hagiwara SYS-COM Compact Flash card is no longer necessary.
2000-02-01 06:48:15 +00:00
a945b488ae
Regen.
2000-02-01 05:51:31 +00:00
032ef78e07
Print more detailed name for Corega ethernet cards.
2000-02-01 05:50:18 +00:00
e00a11df5e
Make it easy to switch between using attribute memory and not.
2000-01-26 22:28:38 +00:00
3d3f376619
Print out what kind of card it is earlier and more accurately.
2000-01-26 02:25:47 +00:00
dc4e418fa6
Add the Linksys Etherfast 10/100. These are currently being rebadged
...
as the NetGear FA410TX 16-bit PC Card.
2000-01-26 01:27:12 +00:00
def54ed969
Regen.
2000-01-26 01:06:03 +00:00
a73e3e37b1
Add the Linksys Etherfast.
2000-01-26 01:05:23 +00:00
a81c1788ab
Regen.
2000-01-25 21:58:23 +00:00
3a9b991c44
Add Lexar Media CF.
2000-01-25 21:58:06 +00:00
3f72e2e3f9
Oops; fix a bug in the previous:
...
If one entry has the DL10019 bit set and another does not, don't fail
immediately if the checksum doesn't work.
2000-01-25 18:04:07 +00:00
9d17b2ca6a
bring in stabilization codes in freebsd PAO/bsdi cnw driver.
...
- link integrity bit check.
- don't send too many packets, add some delay between them (this one is
not enabled by default - try it if you see performance problem on
heavy traffic)
2000-01-25 16:48:47 +00:00
c02060ba9b
Regen.
2000-01-25 15:44:21 +00:00
d1c481fc31
Fix a typo.
2000-01-25 15:43:59 +00:00
509c38cc44
Regen.
2000-01-25 08:07:14 +00:00
6a4d06f322
Use the Ethernet vendor ID to differentiate multiple cards with the same
...
vendor,product pair. (Yuck.)
2000-01-25 08:06:49 +00:00
03ebb087f7
Regen.
2000-01-25 06:53:26 +00:00
4d836ce7f2
Fix product code for Aironet PC4800. Should be 0x0007.
2000-01-25 06:52:54 +00:00
b5064330de
The cfe is initialized to the default entry, when a table entry value
...
is present don't OR in the flags with the defaults, replace them.
2000-01-25 06:36:17 +00:00
8c090e4862
set havenet to 0 when we are switching between operating modes and only
...
after association in ifrastructure mode. Also, deal with roam start
and rejoin net commands.
2000-01-25 05:32:28 +00:00
43311a870f
Regen
2000-01-25 01:17:40 +00:00
97597e1d12
Add ID for BayStack 660 (DS version of 650)
2000-01-25 01:15:06 +00:00
7acb650645
- fix comment style/indentaion.
...
- add comment to refer aic_pcmcia_enable.
2000-01-24 23:14:23 +00:00
7d55178466
support switching to/from adhoc/infrastructure mode with media opt.
...
fill in 802.11 correctly for 802.11 infrastructure.
code not verified with base station yet.
2000-01-24 22:05:53 +00:00
c0214682f7
Add missing \n in attach message, and add a little more information.
2000-01-24 01:32:00 +00:00
9704db4fc4
add driver for raylink/aviator wireless 802.11 FH 2Mbps cards, currently only
...
tested with aviator 2.4
2000-01-23 23:59:21 +00:00
1e33763b41
regen
2000-01-23 23:56:58 +00:00
7527798475
WebGear->Raytheon
2000-01-23 23:55:45 +00:00
8ac52796d5
add right casts to printf bus_space parameters
2000-01-23 20:44:04 +00:00
b7868a436d
Don't overwrite cfe->flags.
2000-01-20 08:47:59 +00:00
24ea998b2a
Regen.
2000-01-18 17:20:32 +00:00
069f019108
Add Aironet Wireless Communications' vendor and product codes.
2000-01-18 17:19:33 +00:00
5253149d51
add mii attribute to xe. (Needed to make PHY attachment work.)
2000-01-18 03:11:11 +00:00
d447117750
Some additional sanity checks to keep this code from bursting into
...
flame if presented with bad CIS data (e.g. because of a memory space
conflict):
* more sanity checking on LONGLINK_MFC CIS tuples (exact length check, sanity
check on size vs. size of array we allocated for them), to avoid various
missteps which could cause this code to complete trash the kernel stack.
* clear the entire contents of the state structure before processing, so
things like uninitted pointers will actually have a known value!
* be more careful with CISTPL_CFTABLE_ENTRY: check to see that the current
state's default_entry isn't NULL before dereferencing it.
2000-01-14 23:09:53 +00:00
c61a134a00
add flags for memory width
2000-01-13 08:58:51 +00:00
5e787daca3
xe@pcmcia
2000-01-09 17:23:05 +00:00
a72606bdaf
now compiles on NetBSD
2000-01-09 17:21:38 +00:00
a6afd742f7
add NetBSD tag
2000-01-09 17:20:36 +00:00
35957910a6
add Xircom 16-bit PCMCIA driver (from OpenBSD)
2000-01-09 17:10:43 +00:00
7d1d793acc
regen
2000-01-09 16:01:22 +00:00
a3bf37e388
add vendor-ids for Intel, Xircom, and Compaq (2) -- from Free/OpenBSD
2000-01-09 16:00:29 +00:00
e81e75d36b
Regen.
2000-01-08 07:35:39 +00:00
903e37734d
Add EXP Computer Inc. PCMCIA controller.
...
From Brad Spencer <brad@anduin.eldar.org> in PR 9140.
2000-01-08 07:34:49 +00:00
aafe48897d
Regen.
1999-12-23 19:46:27 +00:00
c1ea7e7feb
Add the WebGear Aviator2.4 card. No driver yet, though. :(
1999-12-23 19:45:56 +00:00
d4cc45ba08
Fix hot-swapping for controllers which grab two ranges of port space.
...
(if the mapping of the second range succeeded, it would forget about
the window of the second address range, causing a subsequent insertion
event to fail..).
My Sony PCGA-CD51 now hot-swaps a lot better now.
1999-12-09 03:22:41 +00:00
fa517eaed3
regenerate
1999-12-05 20:09:17 +00:00
5a3161ddbc
add Epson EEN10B ethernet
1999-12-05 20:08:39 +00:00
42abf0bf78
regen.
1999-11-29 12:55:20 +00:00
1b6504a175
improve cnw driver, looking at bsdi/freebsd-pao cnw driver by wide+prb@bsdi.
...
- implement ioctls compatible with bsdi/freebsd-pao. stat type is
changed from u_int to u_quad_t to avoid overflows. now it is possible
to switch domain/encryption key from the userland, using cnwctl(8).
- implement multicast/promiscuous mode. tested with IPv6.
1999-11-29 12:53:59 +00:00
a075f72b0e
cnw driver ioctls, from FreeBSD/PAO2 repository
1999-11-29 12:40:59 +00:00
9c0f37b416
regen.
1999-11-29 02:28:55 +00:00
dd7b5aed5b
Support for TDK LAC-CF010
...
by Ichiro Fukuhara (ichiro@ichiro.org ) on kern/8900
ichiro test TDK CF Card on Opensource matsuri,tokyo and send patch to us.
thanx.
1999-11-29 02:28:19 +00:00
6f6045c97d
Regen.
1999-11-27 01:03:33 +00:00
8c5ab0744f
IBM cards update.
1999-11-27 01:03:18 +00:00
506836faa1
Regen.
1999-11-26 17:17:21 +00:00
71f7530292
Add two 3Com modems.
1999-11-26 17:16:53 +00:00
cad52c9e08
Add a entry for Mobile Dock 2, which is 2.5" HDD adapter.
1999-11-21 10:13:08 +00:00
a65648a323
regen
1999-11-20 18:32:31 +00:00
35b90fb812
add Xircom CE3 10/100 Ethernet
1999-11-20 18:32:08 +00:00
38acee1010
Cope with new return value of pcmcia_scan_cis(). (Actually, it's not
...
so new but at least newer when I wrote these code).
1999-11-18 14:25:28 +00:00
f38640f00f
Add some comments and reformat comment which doesn't confirm KNF.
1999-11-18 14:20:11 +00:00
8567277ae0
Print range of all iospaces or all memspaces if their length aren't zero.
1999-11-07 07:44:21 +00:00
8be740541b
Extract MAC address from CIS data in pcmcia front end.
...
Fix multicast address manipulation.
ipv6 now works through this driver.
1999-11-06 16:43:53 +00:00
9be459a1fb
Regen.
1999-11-06 00:59:56 +00:00
9c7bc44f91
Support an earlier version of IO-DATA PCLA/T.
1999-11-06 00:58:32 +00:00
73bf131124
Add rcsid's
1999-11-05 05:13:36 +00:00
12b00b0444
Allow this to build on 1.4.x, too
1999-11-04 18:41:14 +00:00
fd0062aeab
Attempt to be smart about whether to use I/O space or memory space to
...
access the card's shared memory: if we can't allocate the 32k we need,
fall back and just use I/O space access.
1999-11-04 17:48:13 +00:00
2ee5984fa6
Driver front-end for BayStack 650 PCMCIA 802.11 card.
...
Committed using the driver.
1999-11-04 17:12:43 +00:00
5fcccf1e9c
Add a placeholder for the ISA WaveLAN card
1999-10-29 21:35:43 +00:00
77ee68352f
regenerate
1999-10-28 20:00:29 +00:00
2acce3142f
Add BayStack 650 802.11 FH card
1999-10-28 19:59:31 +00:00
061402cc4a
add
...
SOCKET LOW POWER ETHERNET Compact Flash Card.
1999-10-28 09:21:46 +00:00
0f51f21761
add entry Corega PCC-TX PCMCIA card.
1999-10-28 08:12:14 +00:00
a6e07f236b
Sorry backout Patch about COREGA FAST_ETHER_PCC_TX.
1999-10-28 07:21:28 +00:00
312acdff00
add Corega PCC-TX PCMCIA Card (not CardBus but 100Base-TX) Entry.
1999-10-28 06:38:51 +00:00
5ef42fc055
Regenerate.
1999-10-27 19:10:58 +00:00
briggs