mrg
a632bcbe9c
update for kern/sa lib Makefile.inc changes.
1996-10-05 23:46:43 +00:00
mrg
7b71cdec46
minor copyright update.
1996-10-05 23:41:53 +00:00
leo
84ed172edb
Minimal bus.h. Together with the minimal pci implementation, we have just
...
enough functionality to find a VGA card....
Will be expanded when I buy more pci-cards ;-)
1996-10-05 21:45:30 +00:00
leo
080ee49d98
minimal pci support
1996-10-05 21:41:36 +00:00
christos
1b1e1884b3
Changes from file-3.21
1996-10-05 20:20:24 +00:00
thorpej
d01962702f
General cleanup:
...
- make a prototyping sweep
- do some garbage collection
- always print the status of enabling memory parity checking
Still some more to do.
1996-10-05 09:22:47 +00:00
thorpej
84b3384afb
Check for internal HP-IB in SYSFLAG much earlier (i.e. before the MMU
...
is turned on).
1996-10-05 09:19:58 +00:00
thorpej
f52b60c3a0
Prototype ledcontrol().
1996-10-05 09:18:22 +00:00
thorpej
2ec75a3c3c
Cast a volatile pointer to caddr_t for a call to badbaddr().
1996-10-05 09:17:38 +00:00
thorpej
a6a1f78d0c
Handle kernel trace traps and breakpoints like the Sun3 port:
...
- Only pass user trace traps and breakpoints on to trap().
Gets rid of some hair in the trace/breakpoint trap cases.
- Before entering the debugger, switch to a temporary
stack so that the debugger can alter the stack pointer.
- Add glue for KGDB (still not complete).
Some other minor cleanup:
- Protect against some bad pointer derefs.
- Be more a little more verbose when a fatal trap
occurs to aid debugging.
1996-10-05 07:24:10 +00:00
thorpej
8499e0131e
Handle kernel trace traps and breakpoints like the Sun3 port:
...
- Only pass user trace traps and breakpoints on to trap().
- Before entering the debugger, switch to a temporary
stack so that the debugger can alter the stack pointer.
- Add glue for KGDB (still not complete).
Clearly mark the MMU enable trampoline code.
1996-10-05 07:16:52 +00:00
thorpej
0ff075f6e7
Define FR_SIZE as sizeof(struct trapframe)
1996-10-05 07:11:44 +00:00
thorpej
2f9a90e967
Don't lower spl before calling main. For now, do it right before
...
calling hilinit(). Eventually, would like to enable them only after
autoconfiguration is finished.
1996-10-05 07:06:11 +00:00
scottr
d2be4a69c2
Expand tab in copyright message; it loses on some consoles.
1996-10-05 06:32:43 +00:00
thorpej
2793eb282e
If console is on an ite, make sure the HIL is initialized enough for
...
the keyboard to work. Fixes a bug where booting with `-d' worked
only on systems using a serial console.
While I'm here, eliminate some redundancy in the ite console intialization
code.
1996-10-05 05:22:04 +00:00
jtk
fb2727b7e6
update to compile; needs new enum name 'Elf_sht_progbits'
1996-10-05 00:12:49 +00:00
thorpej
5f728fb6de
Garbage-collect some now-unused PANICBUTTON code.
1996-10-04 22:22:15 +00:00
thorpej
608fae21af
Clean up handling of non-maskable interrupts.
1996-10-04 22:19:47 +00:00
thorpej
5c34a4ce35
Use FBTYPE_RESERVED3 for our `unknown' fbtype ... RESERVED1 seems to
...
have disappeared.
1996-10-04 20:35:53 +00:00
thorpej
3db7555465
Returning ENODEV is not correct in a poll entry point. Instead, since
...
read/write returns an error, use seltrue().
1996-10-04 20:34:33 +00:00
cgd
c488b75b83
kill misnamed __indr_references() macro, that would have broken things
...
if it _had_ been properly named.
1996-10-04 19:30:04 +00:00
cgd
010a229c99
compare client names case-insensitively, since hostnames are case-insensitive.
1996-10-04 19:00:31 +00:00
scottr
d12b257695
Fix FMOVEM emulation; postincrement modes use different ordering than
...
predecrement modes, per 68K Programmer's Manual p. 5-88. Pointed out
by Takeshi Nakayama <takeshi@sakabe.nuie.nagoya-u.ac.jp>, verified by me.
1996-10-04 18:07:24 +00:00
scottr
6f72cdccd4
Remove outdated BUGS section (from Mike Long, PR 2804)
1996-10-04 16:59:46 +00:00
scottr
d036bd234e
Sync with Chris' changes to the alpha setroot() and friends to resolve some
...
problems with entering "halt" at prompts.
1996-10-04 14:07:03 +00:00
thorpej
8672fd704e
At the end of the delay calibration routine, explcitly reset the timer.
...
This fixes a critical bug where a clock interrupt would happen sometime
between the call to hp300_calibrate_delay() and when proc0 is initialized.
This ends up dereferencing a bad pointer in itimerdecr(), which scribbles
over the first page of kernel text, specifically vectors 46 and 47 (decimal).
To complicate matters, the way the bug manifested itself was different
depending on whether or not DDB was configured into the kernel. When
DDB is in the kernel, kernel text is mapped read/write. When DDB is not
in the kernel, kernel text is mapped read-only. Note that the kernel
scribble happens early, typically before the console is initialized.
In the non-DDB case, the kernel will hang as soon as it's loaded because
the access causes a fault (before the console is initialized, so you
don't see the trap).
In the DDB case, the access does _not_ cause a fault. However, the
mechanism used to enter the kernel debugger is to issue a "trap #15 ".
Conveniently, this is one of the corrupted vectors (47), thus rendering
DDB useless (it actually caused a recursive panic/trap loop).
This _WILL_ be in the first 1.2 official patch.
1996-10-04 08:55:04 +00:00
leo
3b5c181c8b
Checkpointing my et4000 work. Note that the et-console will not be
...
functional until the minimal pci-support is checked in.
1996-10-04 07:27:52 +00:00
leo
f5fd8ff1f9
Additions for the et4000 driver & pci-bus.
...
Note that there are still missing pieces so both et4000 & pci can not yet
be used.
1996-10-04 07:12:39 +00:00
leo
982a1c25f7
Add the COMPAT_12 options. For GENERIC, also add the ch/ss/uk devices.
1996-10-04 07:08:28 +00:00
leo
c2f94265a2
Only prototype the writeback() function when the M68040 option is defined.
1996-10-04 07:04:46 +00:00
leo
8eb8b97265
Grok the broken ICD partition format. This should be part of the 1.2 patches.
1996-10-04 07:02:17 +00:00
leo
d8a6bb6779
Add ch/ss/uk devices.
1996-10-04 06:56:25 +00:00
leo
c8abf2609b
Nuke use of 'expr' and add ch/ss/uk devices as suggested by Charles Hannum.
1996-10-04 06:52:52 +00:00
christos
4871cd13ce
RCSid police and a small bug fix in util.c...
1996-10-04 05:15:27 +00:00
thorpej
8b118d5f64
Add the `port-powerpc' category.
1996-10-04 04:55:29 +00:00
cgd
8cf4d8ab67
some spaces -> tabs
1996-10-04 03:34:09 +00:00
thorpej
9a4909e2e2
Prototype cd9660_setattr().
1996-10-04 03:27:49 +00:00
thorpej
f3a02a3e45
Prototype the inline functions before declaring them. Compiles again
...
on the SPARC.
1996-10-04 03:23:36 +00:00
explorer
c2e313743d
Change a few minor formatting nits
1996-10-04 02:03:14 +00:00
explorer
61e39d8748
Document the other minor bits for this driver. This needs to be updated
...
once again when the /dev/lpt* characters for these are chosen
1996-10-04 01:58:58 +00:00
explorer
870052156e
Better error message when the card is found but shared memory isn't enabled
1996-10-04 01:28:54 +00:00
cgd
45d20c6b1b
add rdsetimage, sort
1996-10-04 00:22:07 +00:00
cgd
257aa69013
rdsetimage, a program to set kernel RAM disk images.
...
Written from scratch by me, today.
1996-10-04 00:18:55 +00:00
thorpej
f0929a096f
Correct a comment about cdev_fb_init().
1996-10-03 23:40:59 +00:00
cgd
892f00d3e6
fix slight thinko in that last change
1996-10-03 23:14:23 +00:00
cgd
3e1fe814f0
since get_kerntext() is only used by the a.out code, move it there and
...
make it private.
1996-10-03 23:06:42 +00:00
cgd
ca2617f88a
use ECOFF header, not get_kerntext() to help calculate version's file offset
1996-10-03 23:05:27 +00:00
cgd
55c7430b56
rename the ELF section type constants to be Elf_* rather than Elf32_*,
...
since they're shared between ELF32 and ELF64. (Thought i checked this in
earlier, but apparently didn't!)
1996-10-03 22:55:25 +00:00
cgd
1f81754e6d
switch to 'swap generic' since that works now (minimal diffs from GENERIC)
1996-10-03 20:47:19 +00:00
christos
c9ec66c20b
Accept -f flag, but do nothing with it.
1996-10-03 20:09:44 +00:00