a55279da6a
Updated to use cpu_reset() rather than boot0().
...
Set cpu_reset_address to 0x00000000 for currently supported systems.
Update associated comments.
1998-02-22 00:08:16 +00:00
d011ec2573
Provide a prototype for cpu_reset().
1998-02-22 00:05:56 +00:00
dc37a51773
In the future we may want to branch somewhere other than zero when
...
reseting the CPU. Rename the boot0() function to cpu_reset() and
provide a variable to hold the cpu reset address.
1998-02-22 00:05:00 +00:00
78b939d4b5
Pull up duplicated CPP definitions from float.h rev 1.10:
...
>DBL_MIN and DBL_MAX were less precise than they should have been.
1998-02-21 23:50:24 +00:00
44e22f7606
Fix a couple of unused variable warnings for RC7500 builds.
1998-02-21 23:40:03 +00:00
ed4bb065a1
When getting an unmount request from a non-reserved port, don't loop
...
forever.
1998-02-21 23:32:19 +00:00
35c234d2a6
Replace -Wreturn-type with -Wall for CWARNFLAGS.
1998-02-21 23:30:56 +00:00
88aa559e5e
Remove inclusion of machine/katelib.h
...
Remove local prototype of savectx().
Comment all the #endif lines for PMAP_DEBUG
Remove un-necessary variable 'up' from cpu_fork().
Use %p rather than %x for several debug print messages.
1998-02-21 23:27:10 +00:00
018ce60490
Remove functions for disable_interrupts(), enable_interrupts() and
...
restore_interrupts() as these have been replaced by macros in
machine/cpufunc.h.
1998-02-21 23:21:28 +00:00
2553c95bde
Include machine/cpufunc.h for interrupt disable/restore routines.
1998-02-21 23:19:36 +00:00
24aaa5f9dd
Add macros for the CPU functions disable_interrupts(), enable_interrupts()
...
and restore_interrupts().
1998-02-21 23:17:05 +00:00
ccb81fe3d3
Remove prototype declarations of disable_interrupts(), enable_interrupts()
...
and restore_interrupts() as these are CPU related functions.
1998-02-21 23:16:28 +00:00
706589adb9
Update the L1_SEC() macro to take a cache enable mask.
...
Add a macro L1_SEC_SIZE to define the size of a L1 section.
1998-02-21 23:11:28 +00:00
854d928a14
Fix typo in a DMA dummy stub function.
1998-02-21 23:09:37 +00:00
6eccd50f49
Remove local prototype for savectx().
...
Update all map_section() function calls to map I/O sections as
non-cacheable.
1998-02-21 23:08:17 +00:00
c273b285d8
Remove local prototype of savectx().
...
Updated all map_section() function calls to map sections as non-cacheable.
1998-02-21 23:04:54 +00:00
99ae0b08fe
Updated all map_section() function calls to map I/O sections as
...
non-cacheable.
1998-02-21 23:02:34 +00:00
1c782f5da1
Add a cacheable flag field to the map_section() function so that L1 page
...
table section mappings may be made cacheable.
Remove a few nasty hardcoded shifts and use macros from machine/pte.h
instead.
Cleaned up a few comments.
1998-02-21 23:00:57 +00:00
745e11a2b1
Remove local prototype of savectx().
1998-02-21 22:57:44 +00:00
628ae33403
Remove register declarations.
1998-02-21 22:56:58 +00:00
1bd5283fb7
Remove inclusion of katelib.h and include cpu.h and cpufunc.h.
1998-02-21 22:52:50 +00:00
ba8b28d360
Remove local prototypes of strstr().
1998-02-21 22:51:43 +00:00
c81dae4473
Move some prototypes form katelib.h to a more suitable home in cpu.h
1998-02-21 22:49:18 +00:00
9a80b4fa85
Simplify the function calling code and warnsify.
1998-02-21 22:47:20 +00:00
ea04275578
Remove local prototype of disassemble() and include disassm.h instead
...
for prototype.
Fix compiler warnings about unused variables with certain config options.
1998-02-21 22:43:29 +00:00
d13b903579
Remove local prototypes for disassemble() and include disassem.h instead
...
for the prototype.
1998-02-21 22:41:34 +00:00
83fcf2d5c8
Define prototypes for disasm() and disassemble().
1998-02-21 22:38:40 +00:00
f7bd3a0119
Move existing contextsw-avoidance code in rzdump() earlier, since rzready()
...
also calls biowait().
Some drives seek to modepage on every modepage geometry-sense in rzready()
cache dev_t of last readied device in rzdump() to elide rzready() calls.
2x speedup of dumps on rz25 and 20x-30x speedup on some IBM OEM 4gig drives.
1998-02-21 20:20:55 +00:00
d38d12d85a
Whoops, cgd's pmap_map change got lost! Put it back.
1998-02-21 19:22:00 +00:00
0e88177c0b
Implement changes for MACHINE_NEW_NONCONTIG and UVM.
1998-02-21 19:03:25 +00:00
4e915f8681
PR/4950: Rene Hexel: Add id for Terratec EWS64 joystick
1998-02-21 13:19:14 +00:00
3fa53fb439
Check the for the TODCLOCK_FLAG_FAKE flag in the attach args to allow
...
a "real" driver to have priority.
Make sure that a todclock service does exist before trying to read and
write the time.
If no RTC read routine exists, just use the suggested time in inittodr().
1998-02-21 03:19:02 +00:00
fb161c5c9c
Set the flags field in the todclock_attach_args to 0.
...
Fix typo in currently commented code.
1998-02-21 03:13:46 +00:00
50f9bf3cb5
Add a flags field to the todclock_attach_args structure.
...
Define a flag bit to indicate that the todclock is faking the RTC
read and write routines.
1998-02-21 03:12:32 +00:00
59be9f9e0e
Don't configure the qms mouse device into A7000 kernels as the A7000
...
only supports a PS2 mouse and not a quad mouse.
1998-02-21 02:46:11 +00:00
5b4cb30e30
Recognise the ARM7500FE IOMD id as supporting a podulebus.
1998-02-21 02:44:42 +00:00
b302819fbe
Nuke db_show_fs_cmd() and the "machine fs" command in the debugger. The
...
command has not been used for years and is really broken now vfs_conf.c
is no more.
1998-02-21 02:42:42 +00:00
81d2791bd9
Unify ADB options and place them all into opt_adb.h. Provide a knob to
...
enable ADB debugging messages if ADB_DEBUG is configured.
1998-02-21 00:37:07 +00:00
757abd14c5
Added -C option for hexadecimal+ASCII display. [PR/5017]
...
Fixed minor inconsistency in option descriptions in the man page.
1998-02-20 23:45:27 +00:00
4abf2e5151
Enhance look & feel of the generated README.html's.
1998-02-20 22:06:18 +00:00
5f0963e887
Switch to MACHINE_NEW_NONCONTIG
1998-02-20 21:51:29 +00:00
289e97d3a8
Recursively print /bin/sh code for all dependent package as well as the
...
current package (IF called from a package dir and not via bsd.port.subdir.mk;
in the latter case it's assumed that the dependent packages will be scanned
later anyways).
This fixes PR 4992 by Mario Kemper <magick@bundy.lip.owl.de>.
1998-02-20 21:31:20 +00:00
34f7405909
Kill line forgotten during PATH extension (in MAKE_ENV).
1998-02-20 21:01:09 +00:00
0ca6188f89
Fix for ADB hang while probing, based on information from Colin Wood:
...
Rather than waiting indefinitely for a mouse or extended keyboard to
respond -- which may not even exist -- time out after 2 seconds and
continue. This corrects a very common problem with the MRG-based ADB
driver that has bitten many people running 1.3.
1998-02-20 18:14:10 +00:00
0e4a7ffbe0
Regen.
1998-02-20 18:09:29 +00:00
26c238db7d
Linux's getsid(2) does in fact return a pid, not a pointer.
1998-02-20 18:09:04 +00:00
663644670d
Add some details on when filters are run.
1998-02-20 12:24:50 +00:00
e797ce3f09
Did _you_ know you can put lp=port@host into your printcap?
1998-02-20 11:10:14 +00:00
4462053ab3
Fill in missing (default) mmap(2) flags.
1998-02-20 09:27:18 +00:00
f49407ea34
Nit: Use MAP_SHARED for read-only mappings where appropriate.
1998-02-20 09:26:00 +00:00
mark