a1d74a730b
fix LP64 issue in routing message parsing. from thorpej
2000-08-13 00:41:30 +00:00
927f61818e
Add "SYMBIOS" processor type to the SDEV_NOLUN category. These are usually
...
the GEM chips on a Sun D1000- and they cause Qlogic SBus firmware to blow
chunks if you access past lun 0.
2000-08-13 00:03:01 +00:00
ce60088d05
Define ltsleep() in the case of _EXTENT_TESTING so regressions testing
...
works again.
2000-08-12 23:56:50 +00:00
8cfcd021bd
Take away some, add some.
2000-08-12 23:26:10 +00:00
a6cd58daee
Corrected quote. It was totally missing its (well-known) equivalent of
...
a punch line.
2000-08-12 23:04:15 +00:00
3f55a7b9aa
Initial commit of port to MIPS Computer Systems RC3xxx systems.
...
Currently supports the RC3230
2000-08-12 22:57:55 +00:00
a91e7a7c6d
Don't bother with a trampoline to start the pagedaemon and
...
reaper threads.
2000-08-12 22:41:53 +00:00
d66573f747
In reaper(), use ltsleep() instead of simple_unlock()/tsleep().
2000-08-12 22:26:01 +00:00
da048cb7d7
Cosmetic changes.
2000-08-12 22:24:51 +00:00
0390dd7f3e
Fix spelling in comment.
2000-08-12 22:24:26 +00:00
9dae9ea9c5
- Conditionalize ip_gre.c on both "inet" and "gre".
...
- Comment out use of net_osdep.c. This file is currently completely #if 0'd.
2000-08-12 20:47:49 +00:00
e09ab8e986
G/C an unused variable.
2000-08-12 20:09:12 +00:00
df711325aa
"boostrap" => "bootstrap"
2000-08-12 18:52:42 +00:00
5317f1db63
General cleanup and factoring out of common code in ea_readbuf and ea_writebuf.
2000-08-12 18:18:52 +00:00
8521dd166a
Clean up some include paths.
2000-08-12 18:08:43 +00:00
c83f79e315
Add a couple of Inland adapters I forgot last time.
2000-08-12 17:59:12 +00:00
a7449460ec
add comment warning about possible unlock/sleep race
2000-08-12 17:46:25 +00:00
41c6473b10
Use ltsleep in a loop instead of simple_unlock/tsleep/goto try_again
2000-08-12 17:44:02 +00:00
7d96bc05ba
Make various types unsigned, for ease of comparison.
...
Use bus_space_read_multi_2 and bus_space_write_multi_2 to copy packets to/from
board.
2000-08-12 17:03:44 +00:00
861fcc44b7
Use ltsleep(...,PNORELOCK..) instead of simple_unlock()/tsleep()
2000-08-12 16:43:00 +00:00
fe7a6531b0
Add P_BIGLOCK process flag, indicating that the processor should hold
...
the kernel "big lock" when running this process.
(this is largely a placeholder for now; big lock code will be added later).
2000-08-12 16:38:43 +00:00
a6cdaddbe6
Use ltsleep(... PNORELOCK ) instead of simple_unlock()/tsleep()
2000-08-12 16:29:36 +00:00
01233143b9
Use ltsleep instead of simple_unlock/tsleep/simple_lock
2000-08-12 16:28:30 +00:00
f096772215
Two changes for endianness-independence (when we finally split of the SEEQ 8005
...
driver and make it MI):
Set the ByteSwap bit on big-endian hosts, so we can use 16-bit transfers to get
at packets whatever.
Treat Tx/Rx headers as arrays of four bytes rather than as 32-bit words.
2000-08-12 15:29:35 +00:00
be1aad52d8
Regen.
2000-08-12 14:58:20 +00:00
9d708cda6b
Note that we handle RBC and a LaCie CD R/W.
2000-08-12 14:54:18 +00:00
807228a4d8
Make attach message correct for non-umass devices.
...
Handle RBC (a SCSI subset).
2000-08-12 14:52:44 +00:00
3fff1255ea
Add some more vendors and devices.
2000-08-12 14:51:01 +00:00
124bec855a
Minor whitespace change.
2000-08-12 14:35:20 +00:00
beb808e530
Put # endif directive after the right (i.e., matching) close brace
...
to prevent compilation error.
2000-08-12 14:17:13 +00:00
7d83a5201a
bus_space version of if_ea.c -- should have been committed before.
...
Transmit and receive buffer sizes aren't an intrinsic property of the card,
so they belong in if_ea.c rather than if_eareg.h.
Correct some comments in if_ea.c
2000-08-12 14:06:29 +00:00
ee4a3af175
This should be the final part of moving to 64 PTYs by default. Added
...
entries for tty{r,s}{0,1,2,3,4,5,6,7,8,9,a,b,c,d,e,f} to /etc/ttys.
Thanks to Matthew Green for pointing out the need.
2000-08-12 13:43:40 +00:00
4493200775
Use bus_space stuff. No more ReadShort and WriteShort.
...
Also a few minor cleanups.
2000-08-12 13:35:08 +00:00
7ba12358d7
return isn't a function call
2000-08-12 12:20:17 +00:00
b108872b97
Remove spurious reset of card in probe routine -- it can almost certainly
...
safely be left till attach time.
2000-08-12 12:15:59 +00:00
ef01128d16
Avoid gratuitously copying data on transmission as well, and hence do away
...
with the 2k packet buffer in the softc.
2000-08-12 11:56:46 +00:00
c6253bccb9
add FOAD
2000-08-12 11:09:43 +00:00
fea1509f80
Apply fix from IWAMOTO Toshihiro in pr#10813:
...
rev 1.35 of ip_nat.c checks if packets are too short.
For ICMP packets, this packet length checking double counts
the length of an IP header contained in ICMP messages.
So, unless ICMP packets are long enough (such as echo-reply),
packets are mistakingly considered too short and are dropped.
2000-08-12 08:08:54 +00:00
35df2482b0
Protect a IPLLOG with ifdef IPFILTER_LOG. Patch from Darren Reed.
2000-08-12 08:04:18 +00:00
23830f1e6c
- Check CR_RST rather than ISR_TXRCMP and ISR_RXRCMP in sip_reset()
...
- Add more delay after reset
- "Big endian mode" on SiS 900 seems broken so don't enable it;
use htole32()/le32toh() instead
- Don't cast u_int16_t array to u_int8_t pointer
- Add some delay() to FILTER_EMIT macro in sip_set_filter()
Now SiS 900 works on my macppc.
2000-08-12 07:38:40 +00:00
4c0e0bb61c
- enable KERNFS and PROCFS
...
- disable NULLFS and UMAPFS
2000-08-12 06:59:01 +00:00
7803e30fde
- remove "options PMAP_NEW"
...
- enable "options INET"
- enable "pseudo-device loop"
2000-08-12 06:53:37 +00:00
8ecc16e026
Add the coda services.
2000-08-11 23:25:34 +00:00
576563305b
A little cleanup. Deal with lost packets
2000-08-11 23:11:12 +00:00
0f6c5303e1
Missed change of parameter for %r->db_format_radix() change.
2000-08-11 22:50:47 +00:00
52a3078697
fix some size_t/int confusion.
2000-08-11 22:21:41 +00:00
66617b2137
Add ibcs2_sys_gtty.
2000-08-11 22:20:10 +00:00
ef5099c8d8
Use size_t appropriately.
2000-08-11 22:19:29 +00:00
e4dc804075
Regen.
2000-08-11 22:17:58 +00:00
4153441571
add ibcs2_sys_gtty
2000-08-11 22:14:07 +00:00
itojun