a08047d21c
Update alignment comment.
2008-03-15 19:02:49 +00:00
88906c66df
Use proper types.
2008-03-15 18:59:07 +00:00
7582ef2fff
Split device_t and softc for pckbd(4) and pms(4).
2008-03-15 18:46:22 +00:00
6e8b97e230
After a process in swapped in, refresh the pcb's paddr.
2008-03-15 18:42:06 +00:00
467fb43e11
Add -momit-leaf-frame-pointer, saves a few bytes.
2008-03-15 18:00:32 +00:00
8bc324423f
Split device_t and softc for isa(4).
2008-03-15 16:56:29 +00:00
8297b01db8
Set scope on IPv6 multicast address to give carp a chance to work for IPv6, too.
...
From FreeBSD.
2008-03-15 16:44:03 +00:00
5f170d1cdb
Swap red and blue for 8bpp paletted mode.
2008-03-15 16:13:39 +00:00
3bd2b6fba5
Add a 'maxcpus' global.
2008-03-15 14:55:22 +00:00
a22d8d4abb
Split device_t and softc for pckbc(4) and its attachments.
2008-03-15 13:23:24 +00:00
6797804c6b
whitespace '\t' -> ' '
2008-03-15 11:45:18 +00:00
d14160690e
Allow detection of VFP devices on ARM11 cores.
2008-03-15 10:35:30 +00:00
667f59c8dd
Allow use of the VFP.
2008-03-15 10:30:51 +00:00
b45167b608
VFP support.
2008-03-15 10:16:43 +00:00
767de2b348
Wrap mips3_cp0_count_read() stuff (for DECstation 5000/150) with
...
#if defined(MIPS3) so that kernel config without options MIPS3 compiles.
Problem reported by Erik Bertelsen on port-pmax.
2008-03-15 08:50:08 +00:00
45e0220f34
Make sure M_PROMISC isn't already set, before we need to see if we are going
...
to see if we need to set M_PROMISC.
Assume the interface is not CARP'ed.
2008-03-15 05:07:34 +00:00
2e62be9d52
Add "mach reset" command that resets machine by taking a trap with
...
exceptions disabled. Fix db_stackcheck_cmd (have_addr is now bool).
Supply help strings for mach commands.
2008-03-15 01:03:40 +00:00
9e8ca25d60
Switch dz driver to PRIVALLOC and device_* accessors.
2008-03-15 00:57:15 +00:00
eb34c39d65
This is not (has never?) being used.
2008-03-15 00:27:18 +00:00
3fbab323bd
Switch to PRIVALLOC and device_* accessors
2008-03-15 00:25:05 +00:00
3143c8de1f
Use 0 sized softc and switch to PRIVALLOC
2008-03-15 00:24:13 +00:00
5e7971cbf0
Fix device access. Use a 0 sized softc and switch to PRIVALLOC for mem_cmi.
2008-03-15 00:23:17 +00:00
4e11517afe
Use device_*
2008-03-15 00:21:48 +00:00
e344d4551d
Use a 0 sized softc / switch to PRIVALLOC.
2008-03-15 00:21:30 +00:00
e86a2a1377
Cosmetic: make rtw_hw_keysupp() return a bool instead of int. In
...
rtw_wep_setkeys(), add a debug printf, and move the initialization
of keylen from the for-loop to the declaration.
2008-03-15 00:21:12 +00:00
022989947e
Comment out xmi and nmi devices.
2008-03-15 00:20:08 +00:00
6827de95dd
Use device_* accessors.
2008-03-15 00:05:50 +00:00
293fa13f60
Extract subroutine rtw_tx_kick() from rtw_start(), and reuse it in
...
rtw_io_enable() to restart the transmitter after resetting it.
2008-03-14 23:59:01 +00:00
705696f034
In vga_is_console(), use deviter_first/_next() and device_t accessors.
...
Ok cube@.
2008-03-14 23:17:55 +00:00
243c883b6e
Change tests for "impossible" keys to KASSERT()s. Get rid of a
...
temporary variable. In rtw_key_delete(), do not invalidate the
hardware keys unless a WEP key is deleted.
2008-03-14 23:04:42 +00:00
4c9a9f3e5a
Fix compilation under options RND_COM and COM_DEBUG.
...
Reported by Kurt Schreiner on current-users@.
2008-03-14 22:47:06 +00:00
2bb9a33a0f
Add a strchr() - for dosfs in particular.
...
The i386 asm version in src/common is rather larger than this one.
2008-03-14 22:27:32 +00:00
2694fcbd4b
Add a local strcasecmp() instead of pulling the bloat from libkern.
2008-03-14 22:21:53 +00:00
d293cfca1a
Split device_t and softc for all attachments of vga(4).
2008-03-14 22:12:08 +00:00
2f13c500d2
Fix falout from recent VAX code rototill:
...
MicroVAX 4000/[3-7]00 could not get HW Ethernet address.
2008-03-14 21:35:01 +00:00
a6b5eb2b1d
Split device_t and softc for irframe(4).
2008-03-14 21:06:04 +00:00
3682eb424e
Fix falout from recent VAX code rototill: MicroVAX 4000/1xx and 3100m9x could not get HW Ethernet address.
2008-03-14 20:49:29 +00:00
a2a8479cbe
Fix spl(9) botch in cpu_intr() on ews4800mips:
...
Don't enable unhandled interrupts before all interrupts are processed.
2008-03-14 16:47:08 +00:00
4f59bf75cb
Fix spl(9) botch in cpu_intr() on arc:
...
Don't enable unhandled interrupts before all interrupts are processed,
and also change all interrupt handlers to return processed MIPS_INT_MASK
values, rather than masked values of them.
2008-03-14 16:43:27 +00:00
868048cf4d
SMP support for sparc64 now works, so make GENERIC.MP kernel build
...
by default.
2008-03-14 16:43:16 +00:00
9cfa53b41a
#include "opt_multiprocessor.h"
2008-03-14 15:40:22 +00:00
8d734e3bd0
Complete per-CPU TSBs and MMU contexts changes.
2008-03-14 15:40:02 +00:00
5374009247
Improve FPU state save/clear like x86, idea from OpenBSD.
2008-03-14 15:39:18 +00:00
74a205f37a
On SMP kernel,
...
- use "tick" interrupt for per-CPU statclock.
- disable "counter-timer" #1 interrupt and use it as timecounter.
2008-03-14 15:38:36 +00:00
f5506ae261
Enable ETHERCAP_VLAN_MTU.
2008-03-14 15:38:09 +00:00
ead4e6f7b9
Improve IPI handling:
...
- make IPI takes two arguments.
- add IPI event counters per-CPU.
- implement IPI functions which were missing or broken.
- insert DELAY while halting primary CPU in IPI handler.
2008-03-14 15:38:00 +00:00
607ead0ef4
Split device_t and softc for all com(4) devices (well, everything that
...
uses a com_softc backend). Use proper types and ansify where appropriate.
2008-03-14 15:09:09 +00:00
12a7738525
Don't fetch DMA descriptor after BUS_DMASYNC_PREREAD op.
2008-03-14 13:42:01 +00:00
816c3531d9
Split device_t and softc, catching up with changes of all other ne(4)
...
variants.
2008-03-14 11:51:06 +00:00
2f30108619
If a cd(4) is attaching on ata instead of scsi, the controller is
...
the grandparent, not the parent.
2008-03-14 09:44:22 +00:00
christos