ae7f07a2ab
Add detection for the NetGear FA411. It just seems to work as an ne device.
2002-05-08 18:18:55 +00:00
453bd2f8c2
Add support for LINKSYS Instant Wireless Network CF Card
2002-05-07 09:39:52 +00:00
cb52efccad
regen: Add LINKSYS Instant Wireless Network CF Card
2002-05-07 09:37:28 +00:00
902298b5c5
Add LINKSYS Instant Wireless Network CF Card
2002-05-07 09:36:50 +00:00
c419c08421
Regenerate for Netgear FA411.
2002-05-06 22:28:18 +00:00
b72d0938bb
Add in Netgear FA411.
2002-05-06 22:26:48 +00:00
65b0c92cb8
Added cast '(u_int16_t *)'.
...
4th arg of bus_space_read_multi_2 and bus_space_write_multi2 shuld be
u_int16_t *.
2002-05-05 03:19:26 +00:00
f1447dc5d6
add BUFFALO LPC3-CLT Ethernet Adapter.
2002-04-30 13:14:38 +00:00
f1967f2bb2
regen.
2002-04-30 13:13:48 +00:00
07c3f6d008
add BUFFALO LPC3-CLT Ethernet Adapter
2002-04-30 13:12:33 +00:00
7f7ab48604
Rename the audio "bus" attribute audiobus to avoid confusion with audio
...
device.
2002-04-22 09:41:19 +00:00
a40f47b098
Add support to Symbol Wireless Networker CF card.
...
The card is Type 1 CF card and it doesn't have firmware in.
So we need to download the firmware image into the card before
touching it.
XXX downloading code should be written in generic (bus independent),
but I don't have enough information for now.
2002-04-15 15:05:58 +00:00
e4998611e9
Fix copyright notice.
2002-04-14 12:24:26 +00:00
45c8aefabf
PR/16058: Tero Kivinen: Don't attempt to free resources that we failed to
...
get in the attach phase.
2002-04-13 17:06:53 +00:00
0cdadad2cd
Defer initialization of the ISAC chip until we enable interrupts - it gets
...
into a strange failure mode if we do it with disabled interrupt. When
(re-)enabling interrupts reset transmitter and receiver and clear any
pending state.
2002-04-13 10:28:36 +00:00
f12d3f51e7
Remove some redundant tries to disable interupts. We already avoided enabling
...
them.
Fix a stupid typo when enabling/disabling interrupts: we clear pending
interrupts when enabling, not disbling isac interrupts.
2002-04-10 23:51:06 +00:00
6a3322ff00
regen
2002-04-10 02:08:59 +00:00
68eb465167
add product Instant Wireless Network PC Card, Version 3
2002-04-10 02:07:45 +00:00
58502ab93e
Combine sc_enabled and sc_dying into one field sc_intr_valid, they are used
...
for the same purpose (ignoring invalid interrupts).
For cards that are not able to stop all interrupts (or we don't know a way
to do that in software, at least) run the clearirq callback even when
ignoring an interrupt because we are not enabled. Otherwise the card would
stop interrupting.
Reserve a driver specific callout handle and an int value in the generic
isic_softc to allow card drivers to implement fancy blinkenlights.
2002-04-08 12:20:49 +00:00
1a0ee78709
make sure that we don't die if attach fails and we pull the card.
2002-04-03 00:18:31 +00:00
a35450fe90
Backout previous. While it fixes half of the problem for me, it is not
...
the right fix.
2002-03-31 13:27:32 +00:00
6d37025002
Establish/disestablish the interrupt handler when enabling/disabling the
...
controller - no matter if we are called from attach or not.
This makes my FreeCOM CD drive work at first attach (PR 13480).
Something is wrong with the detach code; it won't work on second attach
and will panic on second detach - but that has to wait until the kids
took care of some easter eggs.
2002-03-31 07:19:03 +00:00
e5c92d53f8
Be a nice citizen, enable interrupts only when we are ready to talk
...
to the ISDN (i.e. when userland has /dev/isdn open).
2002-03-30 19:13:44 +00:00
f5e2c967fc
Split BRI attaching into two phases, so lower layer drivers can get their
...
BRI identifier and L3 driver state early on, then finish initializing and
announce the controller to userland when it's ready.
2002-03-29 20:29:53 +00:00
67cbf4c4a8
Rearange things to avoid panics on detaching cards that failed to
...
attach.
2002-03-29 11:21:23 +00:00
21090ba9b3
Remove a XXX comment that is no longer true.
2002-03-29 11:10:38 +00:00
c30c25e24a
PR/16108: Emmanuel Lochin: One more card identifier.
2002-03-28 15:26:58 +00:00
ebd73ccd11
After Jason Thorpe explained to me how it is supposed to work, implement
...
(de)activate for pcmcia cards.
Implement detach/(de)activate for PCI cards.
Clean up internal state (free call-descriptors) if a controller is
detached while it has open connections.
2002-03-27 07:39:35 +00:00
a994533d0a
Make pcmcia cards detach properly.
...
Notify userland of attaching/detaching cards.
This partly fixes PR 15951.
2002-03-25 12:07:33 +00:00
0bc69b6498
Now that we have all the pieces of the puzzle available start to unriddle
...
and move them in their proper places.
Move the BRI registry from layer 2 (duh!) to layer 4, so active cards
(which don't have layer 3 or layer 2 in their driver). Remove all remaining
hard coded controller and driver types. Remove any arbitrary hard coded
limits, at least those that show up in the internal API.
This fixes PR 15950.
2002-03-24 20:35:43 +00:00
071d0cb34b
Search for space to attach a 3c562d correctly. From Hayakawa Koichi
...
<haya@netbsd.org>, thanks.
2002-03-10 22:28:02 +00:00
7e4db265ee
_io_alloc and _io_map work in pairs, dont try to do anything with the data
...
until afterward the _io_map.
In some pcmcia chipsets the _io_alloc is a noop.
2002-03-10 19:20:50 +00:00
df4ebf76f9
Regen (seems I forgot that after TDK/Elsa ISDN MCall addition)
2002-03-10 15:13:52 +00:00
e889f54f2f
Adjust some unused register offsets to the new world order and fix a
...
comment.
2002-03-10 11:55:50 +00:00
7e219b424d
Remove RAY_USE_AMEM. This option claimed to use attribute memory access
...
for the registers, which was true, but actually the same as the driver
did without this option.
What it realy did is work around a stupid bug in the driver that did not
use the "offset" result from the pcmcia_mem_map call mapping the CIS memory.
We got away with this for a long time since on i386 and typical pcmcia
bridged the offset returned will be 0. It always failed (without
RAY_USE_AMEM=1) if the check for a different function CCR aliases in pcmcia.c
failed and mapped the CCR base new - this time at the CCR base of this
function (0xf00), so all register acceses (that had 0xf00 added) happened
way off in neverland.
Now we do not hardcode the CCR base to the register definitions, but
instead use the offset returned by pcmcia_mem_map. This makes the driver
work with and without CCR base aliases being found.
2002-03-10 11:32:18 +00:00
877cb55678
regen (ELSA MicroLink mc all added)
2002-03-04 16:42:19 +00:00
b2b090d6b2
Add ELSA MicroLink mc all (ISDN + modem) card, OEMd from TDK.
2002-03-04 16:41:50 +00:00
a4cfa723ac
regenerate: fix typo in card name string.
2002-02-01 22:04:02 +00:00
48c749a49a
fix typo
2002-01-31 14:27:29 +00:00
30f44eaa28
Add an entry for NEC 9801N_J12, which is an OEM of IBM infomover.
...
PR #14084 .
2002-01-31 08:45:14 +00:00
5fa8e00d02
Fix typo: ASIX, not AMBIX
2002-01-30 12:49:23 +00:00
8a6348be5f
Add Lantech Fastnet/TX (really generic ASIX AX88190) card
2002-01-30 11:20:23 +00:00
c37d15083b
Fix a tyop in a comment.
2002-01-29 00:31:55 +00:00
1a16f52c0a
sort a couple of entries by vendor number.
2002-01-28 09:25:33 +00:00
4a42472b23
add support for Ericsson PRISM2 card (kern/15130)
2002-01-17 09:56:43 +00:00
36fb148d72
Remove the quirks I added for an ethernet card I have.
...
This ``quick fix'' shall not make it into a release, and the problem doesn't
come from the card but rather from my laptop.
2002-01-13 12:28:02 +00:00
2968e4165f
add Edimax Technology Inc. EP4000A
...
add another Linksys Etherfast clone (Level One)
2002-01-13 10:41:11 +00:00
2ae5495943
regen
2002-01-13 10:39:33 +00:00
0e264923e6
add Edimax Technology Inc. PCMCIA Ethernet Card
2002-01-13 10:38:47 +00:00
b87a051ec8
Call malloc(9) with M_ZERO flag instead of memset() after malloc().
2002-01-12 16:17:05 +00:00
065a38a17f
regen
2001-12-29 15:01:23 +00:00
e42e0310b4
Socket Communications Low-Power CF WLAN
2001-12-29 15:00:45 +00:00
63a6896a6c
regen
2001-12-29 08:32:06 +00:00
78efe121bf
add product
...
IBM Smart Capture Card II
2001-12-29 08:31:01 +00:00
ff0249d84d
Fix block position calculation in esl_intr.
2001-12-25 04:05:34 +00:00
b0df9e12af
The check for AUMODE_PLAY in esl_set_params was breaking some applications.
...
Remove it.
2001-12-25 03:47:46 +00:00
a89f9c462b
'nintr' from esl_softc was never used -- remove it
2001-12-25 03:46:34 +00:00
c4669fd0d0
Fixes output at 44kHz, 16-bit, stereo. Thanks to Charles Hannum and
...
Lennart Augustsson for providing proper fixes.
2001-12-25 02:37:39 +00:00
6e8072d607
enable the card before trying to establish an interrupt because we need the
...
ccr mapped on multi-function cards.
2001-12-24 12:07:27 +00:00
0e9f2d7a35
when we disable, we first disestablish the interrupt and then the card.
...
when we enable, we first configure the card and then establish the interrupt.
This is so that the ccr is mapped on multifunction cards.
2001-12-24 09:30:40 +00:00
c4552cab7f
support FUJITSU MB86960/5 based ethernet cards
...
FMV-J181,182,182A
2001-12-23 09:25:19 +00:00
e5761e3205
regen
2001-12-23 09:11:05 +00:00
42ff7db32c
change CIS name
2001-12-23 09:10:39 +00:00
214499d236
change routine of device search.
...
mbe_pcmcia_lookup() is introduced
2001-12-18 11:32:47 +00:00
62ddf45f47
regen
2001-12-18 11:23:49 +00:00
e59b8e538e
add CIS strings of FUJITSU FMV-181,182,182A
...
delete ITCFJ182A, because FMV-182[A] ID is same as ITCFJ182A.
2001-12-18 11:23:24 +00:00
3faa83dcb4
To make dev/pcmcia work on platforms with 64-bit bus_addr_t and
...
32-bit bus_size_t (sparc), change the pcmcia_mem_map(9) offsetp
argument to bus_size_t as it is used as a bus_space offset.
2001-12-16 17:53:17 +00:00
10c8cdf485
missing Misc Attribute of PCMCIA functions
...
FUJITSU CF Ether ITCFJ182A supported "Power down"
Power down supply current are 20mA
2001-12-16 06:07:50 +00:00
ff638ce5fd
support FUJITSU CF EthernetCard
...
ITCFJ181A
mbe0 at pcmcia1 function 0: Fujitsu J182A Compact Flash Ethernet
mbe0: Ethernet address 00:00:0e:c5:01:ea
2001-12-16 05:44:33 +00:00
a4ad95c757
regen
2001-12-16 05:43:16 +00:00
dc739ee7b9
add FUJITSU CF EthernetCard
...
ITCFJ181A
2001-12-16 05:42:46 +00:00
875bff0962
To make dev/pcmcia work on platforms with 64-bit bus_addr_t and
...
32-bit bus_size_t (sparc), change the pcmcia_mem_map(9) offsetp
argument to bus_size_t as it is used as a bus_space offset.
2001-12-15 13:23:20 +00:00
e324e87ca8
Fix typo in comment.
2001-12-15 12:01:55 +00:00
3022b71f80
Correct copyright header.
2001-12-15 11:45:24 +00:00
df984ecc52
Use bus_size_t's for bus space read/write offsets.
2001-12-15 11:41:09 +00:00
4950567ffc
Regen.
2001-12-04 18:46:51 +00:00
9925bfcf9f
PR/13711: Peter Seebach: Symbol's Spectrum24 pcmcia/prism2 card isn't probed.
2001-12-04 18:46:30 +00:00
ecb81c3f6d
- convert usage of "defopt" to "defflag" where the relevant option does
...
not support a value (e.g., it's to be used as "options FOO" instead of
"options FOO=xxx"). options that take a value were converted to
defparam recently.
- minor whitespace & formatting cleanups
2001-11-28 10:21:10 +00:00
60adc294b9
Regen.
2001-11-27 03:25:53 +00:00
f349dc8748
cvs -q update -j1.147 -j1.148 pcmciadevs
2001-11-27 03:25:16 +00:00
f6b0ec4cce
- regen for IBM SCSI PCMCIA.
2001-11-26 19:49:34 +00:00
64b2149540
add IBM SCSI PCMCIA.
2001-11-26 19:48:55 +00:00
dbaca00330
move dev/isa/cs89x0{.c,{var,reg}.h} into dev/ic
...
and split isadma parts into /dev/isa/cs89x0isa*.
2001-11-26 19:17:05 +00:00
9324423e84
remove "stg", that I accidentally commited.
...
thanks, Tsutsui-san.
2001-11-26 14:21:33 +00:00
b43f7a4791
add pcmcia frontend for cs driver.
2001-11-26 11:17:34 +00:00
a103dcf333
support BUFFALO CFtype WLAN card
...
wi0 at pcmcia1 function 0: BUFFALO, WLI-CF-S11G,
wi0: 802.11 address 00:07:40:0f:03:ea
wi0: using RF:PRISM2.5 MAC:ISL3873, Firmware: 1.3 variant 4
2001-11-26 04:34:56 +00:00
1c1ddcc034
regen
2001-11-26 04:19:12 +00:00
3dcc51c184
add device: BUFFALO AirStation CFtype WLAN Card
2001-11-26 04:18:26 +00:00
98576a36a5
regenerate for 1.147
2001-11-19 05:25:22 +00:00
cd84d65811
Merge from FreeBSD:
...
o Add devices from OpenBSD
o Minor sorting problems in my sorting attempt.
o A few additional -1 vendors for better card pattern generation.
o Add Zoom Air_4000 (needs to be added to awi)
o Add Netgear FA411 info (needs to be added to ne, plus quirks/fixes
to base pccard stuff before it will work).
o Merges through FreeBSD 1.22
2001-11-19 05:24:26 +00:00
dbcf46ce8a
match the linksys prism2 card.
2001-11-18 04:27:49 +00:00
9d4995d7d6
regen
2001-11-18 04:26:16 +00:00
fa216ca465
add entries to allow one to match:
...
The Linksys Group, Inc., Instant Wireless Network PC Card, ISL37300PRevA
2001-11-18 04:25:43 +00:00
2565646230
don't need <sys/types.h> when including <sys/param.h>
2001-11-15 09:47:59 +00:00
ab5d9d2b0c
add RCSIDs
2001-11-13 07:24:43 +00:00
64a6ea2e08
Regen.
2001-11-08 17:05:58 +00:00
c7a7458e1e
PR/14503: Cesar Crusius: Add Xircom XE2000.
2001-11-08 17:05:42 +00:00
fd0fac251e
Regen w/ devlist2h.awk ver 1.4.
2001-11-08 09:08:41 +00:00
ba93570e3c
Bugfix; to create compilable pcmciadevs_data.h. kern/11659
2001-11-08 09:02:17 +00:00
fdf7743003
Add Intel PRO WLAN 2011.
2001-11-01 03:00:51 +00:00
8f9f77356d
add entry ELSA XI-800 CF wavelan card
2001-10-27 08:16:17 +00:00
3fc98e32f6
regen
2001-10-27 08:15:22 +00:00
bfc10c9a50
add ELSA CF wavelan card
...
XI-800
2001-10-27 08:05:21 +00:00
b495351fbf
Commit changes I posted to tech-kern on Oct 14, which makes the ethernet part
...
of my Xircom RealPort Ethernet 10/100 + Modem (REM56G) work.
The modem part is still not usable (this would need some PCMCIA magic that
I don't know how to do; see my message to tech-kern on Oct 07).
Change to pcmcia_cis.c from OpenBSD.
I checked that this doesn't break a 3com 3C562D (ethernet+modem) which I
also have.
2001-10-25 20:20:24 +00:00
bea8701ec4
Add Corega PCC-TD, as per PR/14161
2001-10-21 23:18:50 +00:00
bd2ba73f5b
Regen
2001-10-21 23:17:37 +00:00
cb19665fbc
Add Corega PCC-TD, as per PR/14161
2001-10-21 23:16:48 +00:00
a9ec452d57
Add Corega PCCB-11, as per PR/14298
2001-10-20 15:31:25 +00:00
8e7e3408b5
Regen.
2001-10-20 15:29:04 +00:00
259caf9257
Add Corega PCCB-11, as per PR/14298
2001-10-20 15:28:45 +00:00
d9b3639de6
quirk for panasonic adapter.
2001-10-14 19:21:45 +00:00
bc0ae7328a
Regen.
2001-10-14 18:09:42 +00:00
19c27f0e0d
add another cdrom. The box says fujitsu, but the guts seem to be panasonic.
...
Mmm, inbreeding.
2001-10-14 18:09:22 +00:00
cbcfff63ec
Add Intersil Prism2.5 Mini-PCI wavelan.
2001-10-13 15:00:23 +00:00
407046e784
Resync after the sort
2001-10-09 03:18:37 +00:00
e23b40707e
Sort in a sane way. This file had become somewhat disordered over
...
time. Vendors are sorted by number. Vendors are grouped
alphabetically, with entries within a vendor's group arranged
numerically. CIS entries sorted alphabetically by identifier.
2001-10-09 03:17:22 +00:00
c072a38d4c
Add missing comma
2001-10-04 23:36:10 +00:00
1339e88a86
Add a new optional method, dev_ioctl, to the audio hardware driver interface.
...
It is called when an unrecognized ioctl() is performed on a device,
thus allowing ioctl()s that frob the hardware driver (like loading
microcode).
2001-10-03 00:04:47 +00:00
d535feb911
Get rid of eslreh.h and use ../isa/essreg.h.
...
Minor whitespace fixes.
2001-09-29 19:30:29 +00:00
b1d96a9b44
ANSIfy.
2001-09-29 19:06:32 +00:00
f75a223c4e
Add the esl driver.
2001-09-29 18:46:16 +00:00
c018750423
Add esl driver for Eiger Labs sound card. From Jared D. McNeill
...
<jmcneill@invisible.yi.org>.
2001-09-29 14:00:57 +00:00
58a0f075d2
Regen.
2001-09-29 13:59:37 +00:00
da8947c921
Add Eiger Labs sound card.
2001-09-29 13:59:16 +00:00
b08ac48955
Move the call to the xi_pcmcia_identify to before the first use of sc->sc_flags.
...
Doesn't fix my problem with auto negotiate, but it might help others.
2001-09-26 09:01:30 +00:00
0f210a885d
Add simple boundary check on CIS parsing.
...
I have a weird PC-card-style appliance (I'm not sure I may call it a PC card)
whose ``CIS'' reads zeros forever, which caused kernel panic.
For your interest, it is a cooling fan to be inserted to a PC card slot.
2001-09-24 14:19:10 +00:00
7f43a1ffd3
regen
2001-09-18 11:08:05 +00:00
92dc2bcc76
fixed typo
2001-09-18 11:07:33 +00:00
6a617566bc
Move IEEE 802.11 MAC management functions from awi driver to
...
if_ieee80211subr.c, which can be shared between any IEEE 802.11
drivers.
However, most of current working IEEE 802.11b wireless LAN cards
have rich firmware and we cannot have a control to management frames
for such cards.
IBSS creation is now supported for the awi driver.
2001-09-18 09:09:57 +00:00
5ce8138011
add entry "GEMTEK CF WaveLAN Card"
2001-09-17 09:21:58 +00:00
6d3a2e129f
regen
2001-09-17 09:15:12 +00:00
2c089df344
add product
...
GEMTEK CF-size WaveLAN Card based Intersil Prism2.5 Eval-Card
2001-09-17 09:07:53 +00:00
0391dbdcec
regen
2001-09-17 07:45:00 +00:00
a700fb7088
add product
...
Symbol Spectrum24 LA4100 Series CF-size WaveLAN card
2001-09-17 07:44:33 +00:00
c89755275a
* make this match the Psion Goldcard
...
* teach it to read the MAC addr from the correct place (from OpenBSD)
* change order of intr_dis/establish() and function_en/disable() to
avoid panics on this multifunction card due to the CCR window
not being mapped in intr_dis/establish()
2001-09-05 16:40:06 +00:00
429d846242
regen: psion gold card
2001-08-21 16:13:14 +00:00
e62b69f246
add vendor Psion and product Psion Gold Card
2001-08-21 16:13:03 +00:00
92bef1e82b
regen
2001-08-07 13:57:41 +00:00
6c97413c48
Add zonet zen (Henrik Berglund)
2001-08-07 13:57:24 +00:00
97ceb61316
MII access routines for ASIX AX88190.
2001-08-04 11:38:57 +00:00
e01e4819af
regen.
2001-07-31 17:01:34 +00:00
4d31855a1c
recognize dlink-660+, from jandberg@netbsd.org (Jukka Andberg)
2001-07-31 17:01:15 +00:00
7b3241693f
aquired -> acquired, issueing -> issuing
2001-07-26 22:54:34 +00:00
993f9377b8
disable the function if attach fails.
2001-07-13 03:09:39 +00:00
3e747f67fa
regen
2001-07-09 06:58:26 +00:00
2646db5158
add product code for 3Com 3CRWE62092A Wireless LAN
...
(what is the sorting rule for the file?)
2001-07-09 06:57:59 +00:00
4953d4e85f
bzero -> memset
2001-07-07 16:51:47 +00:00
6c248b757c
bcmp -> memcmp
2001-07-07 16:50:41 +00:00
3a235c46fa
bcopy -> memcpy
2001-07-07 16:50:14 +00:00
3ae6eaea7f
bcopy -> memcpy, strcpy
2001-07-07 16:49:57 +00:00
chris