soren
cc8ca41376
Install *reg.h
1999-09-07 21:51:49 +00:00
soren
211476aea7
Match 1460 names with Adaptec.
1999-09-07 19:30:10 +00:00
soren
5c44dfbe6a
Note 78Q2121.
1999-09-07 19:29:52 +00:00
augustss
977c927d44
Do a brain dump of items to do.
1999-09-07 14:58:12 +00:00
soren
a4b7a96e0e
Do not complain in sbfind() if another driver has mapped the registers.
1999-09-07 00:49:41 +00:00
rh
12bad24883
Add opl at wss for isapnp devices w/o MAD chip.
1999-09-06 18:31:45 +00:00
augustss
6e6d511cf0
Add USUBCLASS_MIDISTREAM definition, per request from MAEKAWA Masahide
...
<bishop@rr.iij4u.or.jp>.
1999-09-06 17:16:47 +00:00
rh
ff962e992b
Add mode 3 support for newer CS423X chips. Modify probe to correctly
...
distinguish between CS4236, CS4236B, and CS4237B.
1999-09-06 17:07:04 +00:00
augustss
2425433ff6
Change some printf to DPRINTF for consistency. From Nick Hibma, FreeBSD.
1999-09-05 21:22:38 +00:00
augustss
24251055bc
Change the way the `struct device' base part of all driver softc are
...
declared and accessed to make it more portable. Idea from Nick Hibma, FreeBSD.
No functional changes.
1999-09-05 19:32:18 +00:00
oster
83abb87d9a
Garbage collect more unused stuff.
1999-09-05 03:05:55 +00:00
oster
9c01870db1
Remove more unused stuff.
1999-09-05 02:54:09 +00:00
oster
cfbdda8843
Garbage collect some more stuff.
1999-09-05 02:24:58 +00:00
oster
6158faa69d
Cleanup a bit more.
1999-09-05 01:58:11 +00:00
oster
e57673d0d4
Remove one of the two bzero calls in RF_Calloc -- the 2nd one doesn't
...
buy us anything at all.
1999-09-05 01:46:35 +00:00
soren
57f7d3320b
Add driver for the TDK Semiconductor 78Q2120 PHY.
1999-09-05 01:26:02 +00:00
soren
e0bcd7a71a
TDK Semiconductor 78Q2120 PHY, commonly used in low-power Cardbus cards.
1999-09-05 00:48:01 +00:00
soren
b8e941e9b0
Add PHY driver the the Intel 82553 found on some fxp's.
...
Some variants of this chip need a little extra MII fix before
being usable, so this is not yet put into GENERIC's.
1999-09-05 00:40:27 +00:00
soren
0151ffe3d6
Regenerate.
1999-09-04 23:59:32 +00:00
soren
6624cc41e9
Add Intel 82553 and TSC 78Q2120.
1999-09-04 23:58:55 +00:00
augustss
f3421bec94
Change the way the direction is extracted from the endpoint descriptor.
...
No functional changes to the drivers. From Nick Hibma, FreeBSD.
1999-09-04 22:26:11 +00:00
augustss
e1766aacfa
Make sure not to use the io handle before it's been initialized.
1999-09-04 22:00:32 +00:00
oster
d8144e5848
More cleanup of unused stuff. This time we nuke a bunch of memory
...
allocation stuff.
1999-09-04 21:11:21 +00:00
oster
cfd861fcd8
Minor cleanup of (now) unneeded RF_UTILITY checks.
1999-09-04 16:26:30 +00:00
simonb
56a01be374
Fix tyop in a comment.
1999-09-04 09:41:15 +00:00
thorpej
6a2319b969
Byte swap the EEPROM words on the PNIC. From Stephen Ma.
1999-09-03 00:24:56 +00:00
thorpej
8386184524
Deal with some more Winbond differences, after a more-thorough-than-before
...
reading of its manual.
1999-09-02 23:25:28 +00:00
ross
533b6088cd
Make it compile.
1999-09-02 23:23:03 +00:00
augustss
d7a4829d27
Regen.
1999-09-02 22:07:43 +00:00
augustss
1fed6ca851
Add Logitech QuickCam.
1999-09-02 22:07:29 +00:00
augustss
ba551e0c6a
Regen.
1999-09-02 19:17:57 +00:00
augustss
f6ae3ac6a9
Add some Entrega and Belkin serial adapters.
1999-09-02 19:13:43 +00:00
augustss
60179e2a13
Avoid null reference, from Nick Hibma, FreeBSD.
1999-09-02 18:13:50 +00:00
augustss
46fd81350a
Rewrite interrupt routine from clarity. From Nick Hibma, FreeBSD.
1999-09-02 18:11:41 +00:00
kleink
9c10799ac4
Use the approximated sampling rate to compute the filter rate.
1999-09-02 17:26:15 +00:00
fvdl
5c875f66d0
Select the right transceiver type when configuring the driver. Change the
...
timing for the mii code a bit. From Robert Elz / the FreeBSD xl driver.
1999-09-01 21:03:02 +00:00
thorpej
cfbc8a82fb
Make Tulip-style filter setup interrupt-driven.
1999-09-01 20:56:15 +00:00
fvdl
a6aa19699f
Don't assume that an -FX card has MII (because it doesn't).
1999-09-01 20:26:43 +00:00
thorpej
e75ce8c0df
Don't attempt to do transmit threshold tuning on the Lite-On PNCI; just
...
put it in Store-and-Forward mode right from the get-go. This eliminates
the DMA underrun errors that prevented the receive filter setup from working
and caused smashed packets to go out onto the wire.
My NetGear FA310-TX board now works.
There are still "filter setup failed to complete" messages, however they
don't appear to indicate that the filter setup actually failed, since
unicast and multicast packet reception work fine. I will address this
problem shortly.
Reading the log for the FreeBSD `pn' driver suggests that these chips are,
in fact, pretty crappy, riddled with hardware bugs (for which more workarounds
are coming).
1999-09-01 20:11:19 +00:00
kleink
480e8a1a1c
No longer requires mpuvar.h.
1999-09-01 18:03:10 +00:00
bouyer
ce80d27933
Don't try to unmap unmapped space in case of failure in
...
pciide_mapregs_compat(). From OpenBSD.
1999-09-01 15:17:07 +00:00
drochner
7c34574b94
add "ti" - Alteon Gigabit Ethernet
1999-09-01 11:54:32 +00:00
drochner
45e5d743af
quick 'n dirty port of FreeBSD's Alteon Gigabit Ethernet driver.
...
todo:
-IPv6
-clean up jumbo buffer allocation - NetBSD provides an opaque argument
to the free function, thus doesn't need the hack done here
-deal correctly with the mapping of the shared memory
1999-09-01 11:47:46 +00:00
drochner
7eaa4e57fd
regen
1999-09-01 11:42:32 +00:00
drochner
7c2d8bc001
-add some incarnations of the Alteon gigabit Ethernet adapter
...
-sort some entries which were put in by legasthenics
1999-09-01 11:40:42 +00:00
kleink
e5d76dce61
Don't make a human-readable device description being printed at attach time
...
depend on PCIVERBOSE.
1999-09-01 07:32:31 +00:00
thorpej
5d7f25011b
Some of the Tulip clone chips (like the Winbond and ASIX) want the
...
IC bit set in the *first* descriptor of the outgoing packet. Appease
them.
1999-09-01 05:07:03 +00:00
thorpej
e293024ffa
This is the long-awaited "new Tulip driver", a complete, from-scratch
...
rewrite of the driver for the DECchip 21x4x Ethernet chips, and a variety
of clones.
Currently, the driver supports the Winbond 89C840F (this works pretty
well), and the Lite-On PNIC (e.g. NetGear PCI boards), however Lite-On
support may be broken [I may simply have a busted test board].
Eventually, support for the Macronix and ASIX chips will filter into
this driver, and then, slowly, support for the genuine DEC chips,
and maybe even the DE-425 EISA model.
1999-09-01 00:32:41 +00:00
ad
78d4510ba0
Pass color value through ri->ri_devcmap before writing.
1999-08-31 10:11:52 +00:00
bouyer
7c1c212662
If we are using UDMA mode > 2 and get a DMA error, downgrade to UDMA mode 2
...
first: maybe we incorrectly guessed the cable type.
1999-08-30 12:58:58 +00:00
bouyer
8e49b58de0
Add support for Intel 810 chipset (ICH/ICH0).
...
While I'm there merge back piix_channel_map into piix_chip_map.
1999-08-30 12:49:21 +00:00
thorpej
dea48ccdf9
Oops, back out stuff I didn't mean to commit.
1999-08-30 01:05:08 +00:00
thorpej
a138de1eb5
Add detach goo; still needs work in the `scsibus' and further layers.
1999-08-30 01:04:31 +00:00
augustss
7a3bd0ab27
Add some missing request codes.
1999-08-29 22:45:41 +00:00
thorpej
dd611fa302
Set openings to 1; only one command may be queued with the device at
...
a time.
1999-08-29 20:41:12 +00:00
thorpej
54f6a91c01
Issue a Get Max Lun request to determine the max lun.
1999-08-29 19:58:55 +00:00
thorpej
04cd1cc8ee
Make usbd_errstr() always return a useful error message; it's not like
...
the strings are that big.
1999-08-29 19:41:27 +00:00
thorpej
d1088a5081
One more TODO item; sub-classes other than SCSI.
1999-08-29 18:58:03 +00:00
thorpej
59e86c6637
Correct typo in URL. From Bill Sommerfeld.
1999-08-29 18:57:15 +00:00
thorpej
f88e157ddb
Update the match routine to reflect that the driver actually matches
...
"Mass Storage/SCSI/Bulk".
1999-08-29 18:56:24 +00:00
thorpej
e01cef341e
Update documentation references.
1999-08-29 18:13:26 +00:00
thorpej
f91881f24a
Since we poll around the `done' member of a usbd_request, make it volatile.
1999-08-29 17:57:25 +00:00
thorpej
cbd1c08a2c
Note a few TODO items.
1999-08-29 17:34:11 +00:00
bouyer
52068f73ce
Add support for the Promise Ultra/33 and /66 pci IDE controller. In addition to
...
chip-dependant code this required the following changes:
- Instead of attaching the device in a generic way with some chip-dependant
routines, use a chip-dependant attach routine with some common code
factored out. The code is marginally bigger, but this allows the CMD64x
flag hack to go away.
- For chips that report per-channel 'irq triggered', test this before calling
wdcintr() for the native-pci irq case (compat intr can't be shared),
as wdcintr() has no good way to know if a irq was for it or not, and
ends up with irq loss. XXX for chips that don't have this feature irq sharing
will not work properly !
- add my copyrigth notice (could have been done some time ago I think :)
There are still some issues to be solved with the Promise controller and
ATAPI devices.
Many thanks to Paul Newhouse for shipping me 2 Ultra/33 boards for doing this
work.
1999-08-29 17:20:10 +00:00
bouyer
4819ee1cf1
Add definitions of the DMA mode control registers. They should be used
...
by pciide, but I have yet to find how to map them.
1999-08-29 17:06:43 +00:00
thorpej
246ab7936d
One item off this list done!
1999-08-29 16:53:04 +00:00
thorpej
cbb4401dfd
Port the FreeBSD `umass' driver to NetBSD. This is still a work-in-progress
...
since a few things don't yet work properly:
- Sense data isn't reported properly (err, at all).
- It doesn't work with anything other than the Iomega USB Zip drive.
- Hot-unplug doesn't work yet.
...but this is enough to make my shiny new USB Zip drive go.
1999-08-29 00:30:08 +00:00
thorpej
61f3c9356e
If scsipi_make_xs() fails, make sure to flag the buffer as error'd,
...
if provided, and biodone() it. Callers of scsipi_command() expect
this to be done.
1999-08-28 22:28:35 +00:00
augustss
036a9c6974
Change some 'struct device' to 'bdevice'. From FreeBSD.
1999-08-28 21:42:35 +00:00
augustss
1aa63c9fab
Add some comments.
1999-08-28 10:04:01 +00:00
augustss
103e304a84
Add to the growing list.
1999-08-28 10:03:38 +00:00
augustss
2126f7df24
Change a type name.
1999-08-28 10:01:59 +00:00
augustss
598999e482
Fix from FreeBSD.
1999-08-28 10:01:42 +00:00
augustss
e470b13e28
Regen.
1999-08-28 10:01:19 +00:00
augustss
4b398d8f1b
Fixes/updates from FreeBSD.
1999-08-28 10:00:56 +00:00
augustss
64c7328230
Regen.
1999-08-28 09:22:58 +00:00
augustss
d0fbee34df
Add a bunch of i810 devices. From Paul Shupak <paul@plectere.com>.
1999-08-28 09:18:08 +00:00
thorpej
299c0b1d83
Regen.
1999-08-27 23:27:39 +00:00
thorpej
e1b0108ce6
Add Samsung Semiconductor KS8920 10/100 Ethernet.
1999-08-27 23:25:36 +00:00
is
d8c7407afe
Factor out arc_storelladdr(), and use that instead of arc_ifattach() in
...
the bah_reset() function.
This makes the last change work without deconnecting all the other interfaces
from the interface list.
1999-08-27 19:23:19 +00:00
thorpej
456af6d558
Reduce the number of transmit fragments to 16.
1999-08-27 19:21:32 +00:00
thorpej
513feda9ab
- Include the RXE (receive error) interrupt in the interrupt enable mask,
...
and consider it to be like an RCC (receive copy complete). The RCC
code path has always checked for bad received packets.
- Trim the CRC length off the recived packet length; the EPIC/100 always
includes the CRC in the packet.
- Improve fatal error reporting.
1999-08-27 19:13:00 +00:00
thorpej
43c0128089
Small consistency nit.
1999-08-26 22:44:29 +00:00
thorpej
f2a165de01
Make monochrome attribte allocation a bit more obvious.
1999-08-26 21:48:11 +00:00
thorpej
f0629e4b90
Change the way the default foreground and background colors are chosen:
...
require the front-end to initialize rc_deffgcolor and rc_defbgcolor (both
new members), and override these only if RASTERCONSOLE_{FG,BG}COL are
set in the kernel configuration file.
1999-08-26 20:48:09 +00:00
is
8679b79192
Only use ifp->if_addrlen after initializing it.\
...
Problem detected by Andreas Johansson.
1999-08-26 20:44:50 +00:00
hannken
f04bd56be1
Make `sc_ops->sdo_flush' synchronous. The flags `SDF_FLUSHING' and
...
`SDF_DIRTY' were never reset because `sddone' doesn't get called from
synchronous scsi commands.
1999-08-26 09:28:17 +00:00
mrg
387650fb8b
do not install these headers. they are large (~1.8M) and useless to userland.
1999-08-26 07:58:58 +00:00
nisimura
94073f1fd9
One more ioctl() fix. Most of WSDISPLAYIO_xxx were never been called when
...
no wsmux device is installed.
1999-08-26 06:37:42 +00:00
oster
b1615831d2
Nuke some unused code which, were it enabled, might be useful for
...
performance measurement, but which would cause data corruption.
1999-08-26 02:40:27 +00:00
augustss
65845c9e2a
Regen.
1999-08-25 23:23:33 +00:00
augustss
7529455612
Add a PS2 to Mac USB Adapter from P.I. Eng.
1999-08-25 23:23:17 +00:00
thorpej
90b9deda72
When padding short packets on transmit, don't include the CRC length
...
in the computation. kern/8194.
1999-08-25 22:41:42 +00:00
augustss
6516d0b239
Fix an ioctl() problem. From nisimura@itc.aist-nara.ac.jp (Toru Nishimura).
1999-08-25 21:05:21 +00:00
augustss
e0e1fbbe36
Regen.
1999-08-25 20:34:56 +00:00
bouyer
d6c3ef56b4
Guard pool_get()/pool_put() with splbio()/splx(). Fix kern/8245.
1999-08-25 17:08:20 +00:00
augustss
02a79dc13e
Add Multitech MT5634ZBA. From FreeBSD.
1999-08-25 16:28:12 +00:00
ad
9a61ce5bff
When clearing the entire display, point to the start of the framebuffer,
...
not start of console output. Also, do not advance by ri_delta every row.
1999-08-25 08:45:25 +00:00
nisimura
de9efb01d3
- Fix an error in cursor image manipulation. I learned a pair of Bt431
...
were populated in reverse order from PMAG-A MX ...
1999-08-25 07:56:22 +00:00
nisimura
0bdb76e5cf
- 24bit per pixel TX framebuffer occupies 0x600000.
1999-08-25 02:02:22 +00:00