sommerfeld
9ee533d1f6
Let builder define DESTDIR in mk.conf or
1999-08-01 13:42:00 +00:00
lukem
8e17c17112
fix problem with www authentication: len passed to snprintf() for
...
auth_url() strings was 1 too small. noted by veego@
1999-08-01 12:22:23 +00:00
ragge
870769b516
Cpu_swapin() only need to set red zone now.
1999-08-01 12:07:31 +00:00
scw
ba922d31d8
Re-work the Tx side to avoid calling into the tty layer at
...
interrupt time. This was the cause of the 'mmu fault' panics
seen by several people, as the Tx interrupt is at a higher
priority that spltty().
1999-08-01 09:35:05 +00:00
veego
9baa857f5b
Regen.
1999-08-01 08:32:48 +00:00
veego
9657de4af2
Add an entry for the TI PCI1211 PCI-CardBus Bridge.
...
From the cardbus patches.
1999-08-01 08:32:08 +00:00
thorpej
a843b027bd
Sync w/ the i386 port. Fixes some bugs in the conventional interrupt
...
heirarchy. Reviewed by sakamoto@netbsd.org .
1999-08-01 07:52:22 +00:00
itojun
bc3bad7a1c
- provide reverse query for mapped address (::ffff:10.1.1.1).
...
- NI_NUMERICHOST and NI_HOSTREQD conflict with each other,
so bark if there are both.
(sync with recent KAME)
1999-08-01 06:45:28 +00:00
matt
d8f4dbb171
fix a few mmap bugs. pretend to be a cg3 and implement a hack
...
to fack the Xsun server to believe that the p9100's framebuffer
is really a cg3's. So if only colormaps worked, X would be able
to run.
1999-08-01 06:27:00 +00:00
sommerfeld
0c41be440f
Add `-U' flag (for "unprivileged"). Currently just skips the
...
chown/chgrp stages which would otherwise blow out if not running as
root. A future version may log the owner/group to allow correction by
a later privileged cleanup pass.
Just warn about madvise failure; it's not something to blow up about.
Document new option, and clean up option grouping for -d (install
directory) option.
1999-08-01 05:02:06 +00:00
sommerfeld
65bfbb747a
If target is BFD64, define -DBFD_TARG_64 on command line.
...
If BFD_TARG_64 is defined, set BFD_ARCH_SIZE to 64 even on 32-bit platforms.
(BFD_ARCH_SIZE is an attribute of the target, not (just) the host platform)
This is intended for building 32bit->64bit cross libbfd's (e.g.,
x86->alpha or x86->sparc64)
1999-08-01 04:25:39 +00:00
matt
4b814be9cf
Initial stab at a P9100 console FB driver for the Tadpole 3GX.
...
It supports RASTERCONSOLE only and the colormap support is
broken (the hardware doesn't seem to be doing what the tech.
docs. say it should be doing). But it is usable as a console
(but with blue on white as the only color choice). I figured
I'd check it in since it is somewhat usable and someone else
might figure what I screwed up in the color map support.
1999-08-01 00:23:48 +00:00
sommerfeld
cb448a064d
Fix PR5146: reboot with working directory in unionfs causes
...
"panic: lockmgr: using decommisioned lock"
(only if DIAGNOSTIC)
The problem turned out to be due to the way LK_DRAIN was (not) handled
in union_lock; it just got passed through to the lock on the upper
vnode (which got marked as decommissioned, instead of that happening
to the union vnode. When the upper vnode was next locked (typically
when it was released), it went kaboom.
1999-08-01 00:00:57 +00:00
sommerfeld
29469abdbd
On forced unmount, do a few passes of non-forced cleanups and then do
...
a single forced pass. Along for the ride with PR5146 fix.
1999-07-31 23:56:15 +00:00
sommerfeld
d6fd753892
Let arm32 kernels build after addition of wsmux.
1999-07-31 23:12:20 +00:00
thorpej
7ccd991041
Add FSDO.
1999-07-31 21:51:40 +00:00
thorpej
749eee308d
If building without ITECONSOLE, don't install our own NMI handler. Just
...
leave the ROM's NMI handler in place.
1999-07-31 21:49:03 +00:00
thorpej
f4da661b4a
Nuke the DCA check. ACPI can only be console on a 425e.
1999-07-31 21:17:08 +00:00
thorpej
c870d5243c
Skip "serial 1" on non-425e models. It's mapped to DCA at 9 on every
...
other 4xx model, and the "not configured" could be pretty annoying.
1999-07-31 21:15:20 +00:00
thorpej
e1f99936c8
Nuke apcicheckdca(). Since "serial 1" only exists as an APCI serial
...
port on the 425e, key off that instead.
1999-07-31 21:14:36 +00:00
mycroft
a889d100a4
The previous change caused the BSS and any sections after it to be misaligned
...
in the file. Remove the part of the change which caused this.
1999-07-31 20:56:12 +00:00
thorpej
232492c350
Oops, forgot to add MMUID_385.
1999-07-31 20:50:48 +00:00
thorpej
5ab8857d4e
Add HP385.
1999-07-31 20:19:31 +00:00
thorpej
f7b10e4c9f
defopt HP385.
1999-07-31 19:56:48 +00:00
thorpej
72fa12a41c
Oops, forgot the HP_385 case in identifycpu().
1999-07-31 19:52:35 +00:00
itojun
70ada0957e
sync with recent KAME.
...
- loosen ipsec restriction on packet diredtion.
- revise icmp6 redirect handling on IsRouter bit.
- tcp/udp notification processing (link-local address case)
- cosmetic fixes (better code share across *BSD).
1999-07-31 18:41:15 +00:00
thorpej
ca091a5e33
Fix oversight in last.
1999-07-31 17:20:22 +00:00
thorpej
8c134b93a0
If unlink() fails w/ ENOENT, don't display an error message.
1999-07-31 05:22:05 +00:00
christos
acef34de33
Add note that only the super-user may set or reset any flags on block
...
and character devices. [Commit by cjs.]
1999-07-31 03:30:44 +00:00
christos
022cc95f70
Document kernel behaviour: flags on block and character devices cannot
...
be changed except by the superuser. [Commit by cjs.]
1999-07-31 03:24:46 +00:00
christos
93146392a8
OpenBSD patch to prevent non-root users who own block or character devices
...
(typically ttys or ptys) from changing the flags on them. [Commit by cjs.]
1999-07-31 03:18:43 +00:00
thorpej
7d1889a8bd
Identify the 385 and 425e. Partially from OpenBSD.
1999-07-31 01:26:04 +00:00
thorpej
7c21482563
Add 385 and 425e SPU detection. From OpenBSD.
1999-07-31 00:45:28 +00:00
thorpej
834772047c
Add MMUIDs for the 385 and 425e, and a machine ID for the 385. From OpenBSD.
1999-07-31 00:28:20 +00:00
matt
8e2f403f42
Add ttyC? devices for com devices.
1999-07-31 00:00:03 +00:00
matt
d4b9056054
Add preliminary support for the built-in modem on Tadpole 3GX/S
...
laptops. There is currently something wrong with the interrupt
code but it does attach and sense a 16550a. (anyways the built
in modem is only a 14.4Kb and you'd really want to use a PCMCIA
modem to get faster dialup rates).
1999-07-30 23:58:25 +00:00
matt
8c0f3c5a5f
Add config file specificially for Tadpole 3GX/3GS laptops.
...
It save ~800KB over the standard GENERIC config file.
1999-07-30 23:55:43 +00:00
augustss
b6b44d6809
Eliminate the need for needs-count for wsmux. This should make
...
wsdisplays work properly again.
1999-07-30 20:52:27 +00:00
fvdl
47d416e15d
When converting the end of a partition to CHS, use start + size - 1, not
...
start + size.
1999-07-30 20:46:10 +00:00
thorpej
fff1639c50
GRR! Kludge around the extremely annoying wsmux configuration lossage
...
by removing the "| wsdisplay" from the wsmux.c file declaration. This
will cause any kernel which includes wsdisplay but not wsmux explicitly
to fail to link, but at least those of us with multiple wsdisplays on
a single machine can build kernels again.
1999-07-30 20:42:16 +00:00
ross
02140cb46f
Fix the 16-bytes-of-death bug by generating specific-EOI cycles during
...
sio_intr_setup().
1999-07-30 20:33:43 +00:00
aidan
8fd15316c9
Forgot /usr/include/ss (for krb5).
1999-07-30 19:40:25 +00:00
aidan
b9070123b4
Kerberos5 install paths.
1999-07-30 19:25:19 +00:00
itojun
55ffd6053b
sync with latest KAME. (no behavior change)
1999-07-30 19:16:45 +00:00
itojun
758e308974
fix behavior on 64bit CPUs. args to ioctl() must be u_long, not int.
1999-07-30 18:59:42 +00:00
thorpej
d7bf3732b0
The new rasops stuff is a LOT faster; turn on rasterconsole on the cgsix.
1999-07-30 18:11:38 +00:00
wrstuden
398c91fa04
Adjust column-sizing code to keep output in 76 character lines, so output
...
doesn't wrap in sysinst.
1999-07-30 17:44:01 +00:00
nisimura
c03616646c
- Fix TX 66Hz interrupt handling. Verified ok with PMAG-JA as an 8bpp
...
console. XXX troubles in cursor color.
- Typo in comments of MX.
1999-07-30 16:23:43 +00:00
ad
5cd8715136
Formatting nits.
1999-07-30 16:08:59 +00:00
drochner
44b56d917e
regen
1999-07-30 16:04:41 +00:00