returns EINVAL, indicating that DMA cannot be done for this transfer.
Fall back to PIO in this case.
- Add a geodeide_dma_init() routine that checks to make sure that transfers
start on a 16 byte boundary, returning EINVAL if not. Works around a chip
bug that causes a hard system hang.
Problem reported and patch tested by Erik Fair.
wdc_regs structure, and array of which (indexed per channel) is pointed
to by struct wdc_softc.
- Move the resulting wdc_channel structure to atavar.h and rename it to
ata_channel. Rename the corresponding flags.
- Add a "ch_ndrive" member to struct ata_channel, which indicates the
maximum number of drives that can be present on the channel. For now,
this is always 2. Add an ATA_MAXDRIVES constant that places an upper
limit on this value, also currently 2.
and kill only pending requests for this drive.
Implement a DRIVE_WAITDRAIN flag, which will cause the active command to
be killed once complete.
Other minor fixes.
Now it's possible to detach a ATA or ATAPI device from ioctl even when
a dd on the raw char partition is running.
struct ata_xfer *active_xfer
to ata_queue. Now the active xfer isn't the head of the queue any more,
this makes a few things easier (this will also help for tagged queuing
support).
Remove the WDCF_ACTIVE flag, test active_xfer != NULL instead.
clean up wdc_free_xfer() and kill_xfer().
Clean up wdc_reset_channel(), and make it issue a ATAPI_SOFT_RESET if the
active command is ATAPI.
In wdc_atapi_get_params(), use AT_WAIT | AT_POLL for ATAPI_SOFT_RESET,
so that we'll use tsleep() instead of delay().
In wdc_atapi_start(), call wdc_dmawait() at the right place.
Use this to reset the channel before doing a dump, instead of the hack in
wdc_exec_xfer() based on C_POLL. This hack was causing problems on
controllers with a shared queue, because we now can have C_POLL set during
concurent channels probes (problem found and analysed on sparc64 by
Martin Husemann).
This should even make core dumps marginally more reliable on ATA drives.
Some controllers/drives (e.g. SataLink 3114 with WD Raptor) require
it. Should fix kern/23808 by Chris Gilbert, patch suplied by Chris Gilbert
on tech-kern, extended to all places enabling interrupts by me.
- wdc_xfer to ata_xfer
- channel_queue to ata_queue
and move them to <dev/ata/atavar.h> so they can be used by non-wdc ATA
controllers. Clean up the member names of these structures while at it.
in a different fashion. Individually, they have the same functionality,
but their layout is different. An example of such a chipset is
the Promise 203xx.
To be able to deal with this, transform the cmd and dma bus_space handles
into an array of handles, each seperately created with bus_space_subregion.
The code generated by using the extra indirection shouldn't change much,
since the extra indirection is negated by having the offset calculation
already done in bus_space_subregion. E.g.
bus_space_write_4(tag, handle, offset, value)
becomes
bus_space_write_4(tag, handles[offset], 0, value)
Reviewed by Manuel Bouyer. Tested on wdc_isa, wdc_pcmcia, viaide, piixide (i386)
and on cmdide (sparc64).
http://mail-index.netbsd.org/tech-kern/2003/09/25/0006.html
This adds a device (atabus) between IDE controllers and wd or atapibus, to
have each ATA channel show up in the device tree. Later there will be atabus
devices in /dev, so that we can do IOCTL on them.
Each atabus has its own kernel thread, to handle operations that needs polling,
e.g. reset and others.
Device probing on each bus it defered to the atabus thread creation.
This allows to do the reset and basic device probes in parallel, which reduce
boot time on systems with several pciide controllers.
most polling.
2) Clean up some goofiness in pciide -- get rid of the whole "candisable" path
(it's gratuitous) and simplify the code by calling pciide_map_compat_intr(),
*_set_modes() and wdc_print_modes() from central locations.
3) Add a register writability and register ghost test to eliminate phantom
drives more quickly.
the "bus type" for this.
Merge all the code in the SCSI and ATAPI backends for "cd" devices. All of
the mode page handling and whatnot is general to SCSI MMC devices, and should
never have been separated to begin with. This fixes a variety of problems,
and adds load/unload support for SCSI-attached devices.
deal with such xfers, and can wedge the system with some controllers.
It's a bug to request such xfers for ATAPI, but as the request may come
from userland we have to protect against it.
all function pointers passed in from the adapter driver.
This partly fixes PR 13480, i.e. the FREECOM CD driver works now in pcmcia
adapters.
The remaining issue (timing problems with slow cards and cardbus bridges)
is probably the cause of several other PRs too.
thorpej