b32066575d
Regen.
2003-07-17 12:40:56 +00:00
7b247f3812
Add support for the BCM5705:
...
- Only BCM5705M asic rev A1 was tested.
Thanks to Bill Paul (wpaul@freebsd.org ) for help and support.
Approved by: Frank van der Linden <fvdl@netbsd.org>
2003-07-17 11:44:26 +00:00
74b3acef2e
- last commit (rev. 1.36) add a entry to keep model number of the PHY in
...
mii_softc. There are some situations to want to check model number.
- add comment
2003-07-01 22:58:48 +00:00
d8a4a08a24
- last commit (rev. 1.32) fixes icsphy_reset()'s problem. ICSphys don't
...
restart auto negotiation, so it kick.
- add comment in icsphy_reset()
2003-07-01 22:51:13 +00:00
5af1b6934b
Add ICS1889 and 1892
2003-07-01 22:46:08 +00:00
b464a5b71f
Only read media status bits when they are valid.
...
From Makoto Fujiwara in PR kern/21810.
2003-06-06 23:22:56 +00:00
37a9b25563
Match Broadcom's BCM5214 Quad 10/100 media interface.
2003-05-02 19:42:35 +00:00
4c6f8bfaa7
Regen
2003-05-02 19:39:47 +00:00
5f24295efa
Add entry for Broadcom's BCM5214 Quad 10/100 media interface.
2003-05-02 19:39:29 +00:00
c31f87a5cb
Use aprint*().
2003-04-29 01:49:33 +00:00
b8943cbf89
Save some text segment space by not defining URLPHY_DEBUG.
2003-04-04 22:21:39 +00:00
ba0f309a91
Before checking the (Intel specific) SCR_T4 register, make
...
sure the chip implements 100T4 (in BMSR).
The 82562 (which doesn't implement 100T4) has the SCR_T4 bit
(always?) set, which led to wrong media status reports.
approved by thorpej
2003-03-27 19:36:49 +00:00
52f7db1beb
Fix C&P tpyo.
2003-03-07 00:14:38 +00:00
c4d8a6226e
Make the intel phy match the i82562 phys.
2003-03-06 22:38:09 +00:00
4630a8e7f3
Add a MIIF_FORCEANEG flag to be passed to mii_attach. This forces an
...
autonegotiation to take place if IFM_AUTO is selected in mii_media_set.
Make the gem driver use it. (XXX hme probably should use it but I can't
test that).
2003-02-20 00:55:21 +00:00
ee04df9a4d
Add support for Am79C87[45].
2003-01-26 06:25:08 +00:00
5ade701481
Regen.
2003-01-26 06:21:03 +00:00
b9f79bf02f
Add AMD Am79C87[45] (which use the Altima OUI).
2003-01-26 06:20:30 +00:00
1f71c142cd
Add altima (broadcom) AC101L, phy for 3com 3c905cx-tx on nForce2 MCP-T
2003-01-17 06:23:52 +00:00
6672d83048
regenerate to match miidevs, added ac101L phy
2003-01-17 06:21:13 +00:00
3f50762f0c
Add altima (broadcom) AC101L, phy for 3com 3c905cx-tx on nForce2 MCP-T.
2003-01-17 06:20:07 +00:00
1556fd569d
Update first 16-bit word of 5401 DSP patch to match latest Linux drivers.
...
Add comment saying what the magic values do: disable tap power management.
2003-01-16 20:02:05 +00:00
0ecaf20a9d
regen machine-generated files from miidevs rev 1.44 (bcm5704 phy)
2003-01-16 18:46:08 +00:00
4b1bc17628
Add PHY entry for bcm5704c (copper) integral phy to miidevs.
...
Add 5704 phy and dsp patch, and untestsed dsp patch for 5703, to brgphy.c.
2003-01-16 18:43:40 +00:00
72a7af27b0
Use aprint_normal() in cfprint routines.
2003-01-01 00:10:15 +00:00
78b64fd232
Recognize BCM5703 phy. (with this and the bge changes, the bge0 on my
...
ASUS P4PE m/b is now working)
2002-12-27 03:15:52 +00:00
9d04e25e82
Regen.
2002-12-27 03:14:23 +00:00
2860168d98
Add BCM5703.
2002-12-27 03:14:06 +00:00
e750674637
Regen (MYSON MTD803 added)
2002-11-07 20:37:03 +00:00
d407db9cfd
Add MYSON MTD803
2002-11-07 20:35:55 +00:00
d52f5f8ecb
Make mii_media_active unsigned.
2002-11-07 07:45:03 +00:00
499a491929
Fix signed/unsigned comparison warnings.
2002-11-07 07:41:22 +00:00
43ed640ca5
fix lint warnings about things being stringified under cpp -traditional
2002-10-23 01:50:11 +00:00
03f1a009cb
If pnaphy attaches, make sure the mii_flags has MIIF_IS_HPNA in it.
2002-10-13 06:28:01 +00:00
c9b3657ce9
Add trailing ; to CFATTACH_DECL.
2002-10-02 16:33:28 +00:00
71adb76f75
Use CFATTACH_DECL().
2002-09-30 21:57:46 +00:00
b1c7ac0e6d
"definitions" has lots of 'i's, but that's not reason to leave one out.
2002-09-29 23:23:56 +00:00
0720e04052
Remove a debugging printf.
2002-09-28 19:07:43 +00:00
cbc5db835b
Try a little harder to work around the "Isolated After Reset" lossage.
2002-09-28 10:27:21 +00:00
f818766afe
Declare all cfattach structures const.
2002-09-27 20:31:45 +00:00
0f09ed48a5
remove trailing \n in panic(). approved perry.
2002-09-27 15:35:29 +00:00
6c88de3b53
Introduce a new routine, config_match(), which invokes the
...
cfattach->ca_match function in behalf of the caller. Use it
rather than invoking cfattach->ca_match directly.
2002-09-27 03:17:40 +00:00
d1ad2ac4f2
Rather than referencing the cfdriver directly in the cfdata entries,
...
instead use a string naming the driver. The cfdriver is then looked
up in a list which is built at run-time.
2002-09-27 02:24:06 +00:00
ce2ec9e63e
Add support for the SMsC LAN83C183 PHY, which actually probes as a
...
Seeq 84220.
Also add an 84220-specific work-around for some braindamage (at least
in the PHY I'm working with) where the PHY always comes out of reset
isolated, regardless of the previous state of the BMCR_ISO bit. This
happens even if the PHY has address zero, which is contrary to the
part's datasheet...
The work-around is only applied if we notice BMCR_ISO is set when it
should be clear following reset. The fix is to wait 30mS and clear
it manually. (The change doesn't stick if it's cleared sooner than this)
2002-08-26 11:13:13 +00:00
660edcbaff
Match 881011 PHY.
2002-08-08 00:04:57 +00:00
86710d1b0a
Regen after addition of marvell 881011.
2002-08-08 00:04:28 +00:00
b068d9297a
Add ID for Marvell 881011 phy found on newer i8254x-based gig-e cards.
2002-08-08 00:03:42 +00:00
7d85789f0a
Move the BCM5401 DSP patch out of the bge driver and into
...
the brgphy driver; all users of the BCM5400 and BCM5401 need
the DSP patch and the sledgehammer-reset-at-media-set-time.
Also add a DSP patch for the BCM5411 gleaned from Apple's
GMAC driver for Darwin.
Tested with a 3Com 3c996-T (BCM5700 + BCM5401).
2002-07-13 01:23:27 +00:00
b13f958c53
Match the BCM5421, found on the Apple Xserve. From Matt Thomas.
2002-07-12 04:00:10 +00:00
97f6bca3e2
Regen.
2002-07-09 23:25:07 +00:00
hannken