sunxi_ccu_div_set_rate(). If it's not enabled get_rate() will return 0 and
sunxi_ccu_div_set_rate() will fail.
- rework sunxi_ccu_lcdxch0_set_rate() to actually really select the best
parent.
Fixes PR port-vax/53039: GCC/VAX hits ICE building libstdc++
GCC wants to change the label and then doesn't recognise the
new insn, it believes it doesn't satisfy the memory_operand
predicate.
It appears the memory_operand predicate doesn't accept volatile
memory accesses during the RTL generation phase.
The predicate is from rs6000 code.
from krister
This modification consists by the following two parts.
- drain packets in if_snd queue or corresponding txr->txr_interq
when link_active == false in ifp->if_start(), ifp->if_transmit(),
and deferred Tx processing
- drain packets in if_snd queue and all of txr->txr_interq's
at link-down time
ok by msaitoh@n.o.
Add a sunxi_ccu_display.c file with helpers for setting up display engine
clocks.
for fractional clocks, rename frac_en to div_en, I got the logic inverted.
Adjust tcon0-ch0, tcon0-ch1, tcon1-ch0 and tcon1-ch1 definitions to
automatically select a parent. tcon0 hardcoded to pll3 and tcon1 to pll7.
Define a round_rate() callback for these clocks, as well as fractional clocks.
Hardcode debe clocks parent to pll5.
which returns the rate that would be used by this clock if clk_set_rate()
was called. Used by drivers (or other clocks) which have their own divider
and need to know the parent's clock capabilities to compute the best
parameters.
Use ps -A instead of ps -ax (-A means -ax, but -A is posix, -x is not)
Use ps -o args instead of ps -o command (same reason).
This makes no difference when the ps used is /bin/ps on NetBSD, but
can make a difference when some other ps command gets invoked instead.
XXX pullup -8
apparently widespread division-by-zero bug in our TCP code: if a user adds
huge IPv6 options with setsockopt, and if the total size of the options
happens to be equal to the available space calculated for the TCP payload,
t_segsz gets set to zero, and given that we then divide several things by
it, the kernel crashes.
- sys/arch/evbarm64 is gone and integrated into sys/arch/evbarm. (by skrll@)
- add support fdt. evbarm/conf/GENERIC64 fdt (bcm2837,sunxi,tegra) based generic 64bit kernel config. (by skrll@, jmcneill@)
Firwire interface which is not exclusive to the PowerBook G3.
It can be found in the G3 iMac DV for example
http://dmesgd.nycbug.org/index.cgi?do=view&id=1124
Rename the PBG3_FW device UNINORTH_FW & set the previously listed UNINORTH_FW to
UNINORTH2_FW which is what the device actually is.
Verified using https://pci-ids.ucw.cz/read/PC/106b
libtre cannot be used any more as a replacement for regex(3).
Tt does not build and the library development is stalled in upstream.
Proposed on mailing list.
Sponsored by <The NetBSD Foundation>
