6969cb676f
Pass new boot information per default.
1997-09-28 13:31:45 +00:00
22869434f2
Bring the new root disk algorithm into shape (minor cleanup, clarify
...
error message) and enable it.
1997-09-28 13:17:41 +00:00
8e9fc838dc
In the OS glue code for the 060SP, replace the copyin()/copyout() glue by
...
movs.
XXX As our CPP seems to hate the 060SP, I couldn't use assym.h for the
PCB_ONFAULT definition, but had to hardwire 64 in the code. This needs
to be fixed ASAP, and will be done in the upcoming reorganization of
the 060sp Makefiles.
1997-09-28 12:57:57 +00:00
4de13c78d3
Use the "proginstall" rule from <bsd.prog.mk> to get the UPDATE
...
behaviour right.
1997-09-28 11:47:29 +00:00
d2cd21c0ef
Fixed typo. in FPU_68882 entry for MVME147
1997-09-28 11:29:48 +00:00
3ad599d701
First part of splitting lpt.c, and the NetBSD/Amiga "supio" frontend. Needs
...
a bit more work to allow an ISA frontend.
1997-09-27 22:44:11 +00:00
da4ac7ec5a
GC setpte*() declarations.
1997-09-27 18:04:47 +00:00
450cdbdaab
Move the "unimplemented software trap" message within `#ifdef DIAGNOSTIC'
...
and use uprintf() for the notification.
1997-09-27 18:03:39 +00:00
70ca0fdc80
Move the per-processor counter register into cpuinfo.
1997-09-27 18:01:30 +00:00
d0b1ee0833
* Optimize pmap_{zero,copy}_page4m() a bit by pre-computing the PTE addresses
...
of the reserved KVAs (vpage[]) used by these routines. This avoids the
context switching in there.
* In pmap_redzone(), remove the first kernel address (at KERNBASE) from
the kernel maps instead of just turning off the PTE `valid' bits.
The latter doesn't create a "red zone" at all, but causes the VM to
allocate a new page if the red zone is touched.
1997-09-27 17:58:03 +00:00
7482ebb584
Insert a hack to allocate IOMMU addresses congruent to the kernel virtual
...
address that being DVMAed to.
1997-09-27 17:49:33 +00:00
8a3aef8a1a
Wait for a keypress after the system is halted and reboot after a key is
...
pressed.
1997-09-27 17:19:38 +00:00
663ab6e406
Most of _machineid->cputype.
1997-09-27 15:52:54 +00:00
e8e12f56dc
Don't use "termios" constants if no "com" devices are configured.
...
Closes PR port-i386/4166 (Chris Jones).
1997-09-27 10:55:48 +00:00
b0f51853ef
conf.h: declare com instead of drcom.
...
conf.c: remove com declarations.
1997-09-27 10:38:10 +00:00
fa6b4a3a7b
add (commented) options BLINK, per PR#4075.
1997-09-27 09:56:25 +00:00
f338821834
Do not set CPUFLG_CACHEPAGETABLES inappropriately on microsparcs
1997-09-26 22:17:23 +00:00
665c7aa080
* Implement a private page table storage allocator for SRMMUs. It provides
...
uncached (if needed) chunks of memory of the two sizes (256 and 1024
bytes) that the SRMMU ever needs.
* Change pmap_changeprot4m() so that is does not rely setpte4m() because
setpte4m() cannot be used for anything other than VAs that are in the
pmap associated with the current context.
In the same vain, make sure that kvm_uncache() switches to context 0.
1997-09-26 22:15:37 +00:00
a611bcde84
Add another Dayna card to the Apple-compa. list.
...
Define a constant for the SuperMac Spectrum/24 series III display card.
Thanks go to Luca Falzoni <falzoni@jetai.unipv.it> for trying out the
code for the Dayna ethernet support.
1997-09-26 00:37:05 +00:00
40f6f7e831
Make the #ifdef expression prior to the declaration and use of
...
"nptesg" match each other, per PR#4024.
1997-09-25 07:31:28 +00:00
d65a5e7fd2
Enter DDB on cntl-alt-esc (a'la i386).
1997-09-25 02:42:47 +00:00
ef86b9a61d
Fix a small oversight in last change.
1997-09-25 02:13:44 +00:00
0c2efd7025
Add a "scrollskip" member to wscons_emulfuncs (XXX even though it's not
...
a function) which specifies how many lines will be skipped when scrolling
up when the bottom of the screen is reached. Dumb framebuffers skip 10
lines (as before) because the copies are s ... l ... o ... w, but it's
silly to skip 10 lines on VGA, since the copies are much faster, so we
only skip one in that case.
1997-09-25 01:31:53 +00:00
4fbbe844dc
Locore.s cleanup round 1:
...
- MIT syntax to Motorola syntax moveml register lists (for better readability)
- comment alignment
- remove commented out debug or alternate code from early DraCo support
development.
(I wanted to do this stuff for a long time, but always had "more important"
things to do.)
1997-09-24 19:49:08 +00:00
56c4befa83
Add an entry for the bus_space_tag in the TC attach argument tables. Fixes
...
PR #4100 .
1997-09-24 02:45:12 +00:00
9769ae9148
Fix error in msgbuf change: add missing '&&'.
1997-09-24 02:20:56 +00:00
5bcefb5bc6
Fix another missed *setregs() change.
1997-09-24 02:15:51 +00:00
42c325e139
A minor barely acceptable hack to handle having a kernel boot on a system
...
with large amounts of memory and not spew. This doesn't really replace
fixing this problem better later, but it works for now. Basically, if memory
is greater than 128MB, start upping the sizes of some maps.
1997-09-23 23:23:23 +00:00
b23bbbb05c
Redo the platform specific identification and initialization, making
...
it more explicit where platform specific functions (like machine check
handling) should go.
1997-09-23 23:15:42 +00:00
0bd1685aa0
In device_register(), don't check PCI is PCI support isn't configured
...
into the kernel.
Also, some formatting changes to make new root finding code more KNF'ish.
1997-09-23 22:34:00 +00:00
40c87730b3
Move KERNBASE to 0xf0000000.
1997-09-23 19:59:27 +00:00
ea2fc3a36c
Add a missing ( in the pmap_enter call for the message buffer.
1997-09-23 13:48:15 +00:00
f5bb941f5b
MSGBUFSIZE needs no obscure adjustment; initmsgbuf() takes care of that.
1997-09-23 08:23:29 +00:00
c209086562
The symbol `_msgbufaddr' is no longer exported.
1997-09-23 08:19:56 +00:00
9632cb41c6
Fix some lossage resulting from changed message buffer initialization:
...
don't buck the trend and move the call to initmsgbuf() to cpu_startup()
in machdep.c (like most other ports do) where we can setup things right
in one go. (This means that the CSRG copyright will no longer be in
the kernel logs).
1997-09-23 08:16:26 +00:00
b562e93fc1
Remove duplicate declaration
1997-09-22 20:35:51 +00:00
676d60fa45
Fix printf formatting; remove extra spaces, add : at the end.
1997-09-22 20:34:45 +00:00
fb0bc9eeae
Fix (hopefully) the compile errors introduced by the msgbuf changes.
1997-09-22 15:03:58 +00:00
376e3e6e34
Glue in memory_disk_hooks.
1997-09-21 22:53:03 +00:00
585f46558e
Add support for mounting a memory disk as the root device.
1997-09-21 22:51:29 +00:00
c6ff44d7a1
Add support for the memory disk device.
1997-09-21 22:44:46 +00:00
02f4c2f7e9
atari_round_page() -> m68k_round_page(). My fault, sorry...
1997-09-21 20:35:31 +00:00
b325cdd771
Build this in ${KERNEL_BUILD_DIRECTORY}/lib/fpsp, similar to libkern.
1997-09-21 17:33:36 +00:00
970af214ab
Deal with HUPCL, closing (but in a different way than proposed) PR 1010.
1997-09-21 17:21:24 +00:00
03a798a3fd
Add some defines for alpha interrupt types.
1997-09-20 19:02:34 +00:00
fca3465b96
Do not skip over a break trap instruction, now that the DDB code can
...
do it properly.
1997-09-20 19:00:40 +00:00
9b3d64edb9
Remove the `segmap' array from the header. Insert an offset and count
...
field to get to it instead.
Add field `kernbase' so libkvm can be independent of the kernel's link address.
1997-09-20 18:23:51 +00:00
59ed02a11b
pmap_dumpsize() returns a number of disk blocks.
1997-09-20 18:18:33 +00:00
1cd19dc013
Change crash dump layout a bit so the size of the `cpu_kcore' structure
...
does not depend on the value of KERNBASE.
Change pmap_dumpsize() to return disk block units, in stead of pages.
1997-09-20 18:14:01 +00:00
1f1e574146
-implement a "device_register()" function to identify network interfaces
...
by bus type / address (for diskless boot)
-add some (experimental, commented out) code which could be used for
identification of boot disks - should help for BIOS remappings
1997-09-20 14:15:54 +00:00
610abce93b
Copy data passed by the boot loader into an array "bootinfo".
...
The former "cyloffset" argument is used as an (indirect) pointer to the
information structures. "cyloffset" has always been set to zero in the
past, so this should be save to do.
1997-09-20 14:01:26 +00:00
968f26b9d3
-define a buffer for information passed by the bootloader
...
-add a function ("lookup_bootinfo") to extract data
-use passed console information, if present, for console attachment
-arrange definitions for console and KGDB device a bit nicer
1997-09-20 12:51:13 +00:00
b8a47d06da
Define "machdep.booted_kernel" for sysctl.
1997-09-20 12:40:25 +00:00
c03122fcb1
In some future (ie, without COMPAT_OLDBOOT), we don't want to bother
...
with the disk type (IDE or SCSI) here - the BIOS doesn't do it either.
Set "#ifdef"s accordingly.
1997-09-20 12:36:05 +00:00
dc0b04e0ad
Note use of common menu functions and new framework for argument passing
...
to the kernel.
1997-09-20 12:28:21 +00:00
041680f614
don't forget to save the partition number for the kernel
1997-09-20 12:17:41 +00:00
9b4679d869
-Don't pass hardware address, it is not of much use for the kernel.
...
-define "addr" differently for ISA and PCI devices - for PCI, it is
(bus,device,function) now, in the format used by the PCI BIOS
1997-09-20 12:13:01 +00:00
1e11bfa8b7
Move the definition of MSGBUFSIZE up to the machine-arch level if
...
possible. Pointed out by Bernd Ernesti.
1997-09-20 12:12:24 +00:00
2b138578d7
Correct for the extra member in 'struct kern_msgbuf' when calculating
...
the number of bytes we want to allocate.
1997-09-20 12:10:09 +00:00
1d47009a08
Use <machine/bootinfo.h> for definitions shared with the kernel.
1997-09-20 12:10:06 +00:00
ef6f3f7e25
Move the definition of MSGBUFSIZE up to the machine-arch level if
...
possible. Pointed out by Bernd Ernesti.
1997-09-20 12:08:24 +00:00
17b42ff68d
Data structures passed from the boot loader to the kernel.
1997-09-20 12:08:21 +00:00
c5ba7a3102
Move the definition of MSGBUFSIZE up to the machine-arch level if
...
possible. Pointed out by Bernd Ernesti.
1997-09-20 12:06:37 +00:00
185cbcebd0
An oops- MSS3 referred to a device not yet integrated.
1997-09-19 22:03:59 +00:00
4de790f125
Add in a clause ifdef'd for LIMITMEM- limit usage of memory to a certain
...
amount. Temporary until more drivers use busdma stuff.
Also correct to unsigned the printing out of memory sizes.
1997-09-19 22:00:34 +00:00
206b183a48
Add a config file for large memory 8200s- this is temporary until a
...
more gracious self correcting (for large memory, e.g., > 1GB) startup happens.
1997-09-19 21:58:47 +00:00
0fb787aedb
Add missing reference.
1997-09-19 14:48:59 +00:00
f3d890d1c9
missing cast.
1997-09-19 14:47:33 +00:00
d4713d24c2
Implement the kernel part of pr-1891. This allows for a more flexible sized
...
msgbuf. Note that old 'dmesg' and 'syslogd' binaries will continue running,
though old 'dmesg' binaries will output a few bytes of junk at the start of
the buffer, and will miss a few bytes at the end of the buffer.
1997-09-19 13:52:37 +00:00
24cbd68d21
Enable the 800x600 Super72 display mode in the generic kernel.
1997-09-19 03:30:41 +00:00
a07bb333b1
Add an 800x600 Super72 mode; started by Neil Clark and finished by me.
...
NOTE: due to hardware requirement of the AGA chipset, the framebuffer width
has to be a multiple of 64 bits. An 800x600 display will use a memory width
of 832 bits, which the current X server can't handle. To get a usable
display, the width needs to be 832 or 768.
1997-09-19 03:27:10 +00:00
618f6b9541
Make IDE work again, from Ross Harvey <ross@teraflop.com>.
1997-09-19 00:59:38 +00:00
f5c0dfebd6
Use ${CC} instead of cc and don't explicitly set AR and LD unless they are
...
unset.
1997-09-18 22:55:56 +00:00
bb3e7cdb98
Fix viking/MXCC botch similar to pmap.c.
1997-09-18 20:44:43 +00:00
ef73834bdc
Check for the `VIKING_PCR_TC' being set, just in case. If it isn't set,
...
delay the use of the `CPUFLG_CACHEPAGETABLES' flag.
1997-09-18 20:29:15 +00:00
eac8e745a7
Add a function to stop sun4m counters and call it early during
...
auto-configuration.
1997-09-18 20:25:34 +00:00
9d1afc6f01
Fix a botch in reservemon4m() causing the `Alternate cacheability' not being
...
set on viking MXCC machines while using transparent memory access mode. This
becomes apparent when booting on multi-processor viking machines.
While I'm here, arrange to tempt fate a little less by using `AC' mode
for the shortest possible periods of time.
Special thanks to Matt Ragan for running my test kernels.
1997-09-18 20:16:45 +00:00
c95e55b9ec
Read the received data register before clearing the RBF interrupt. Clearing
...
RBF appears to also clear the OVRUN bit in the receive data, resulting in
the loss of of overflow status.
1997-09-18 03:53:12 +00:00
0d05b5c280
Use the buffer length passed as a parameter to vmapbuf() and vunmapbuf()
...
instead of bp->b_bcount. The I/O operation may have changed bp->b_bcount,
and not all of the kernel virtual memory will be freed. This will result
in the VM system putting pages back on the free list which are still
mapped. This may cause a deadlock later trying to enter pages into
the kernel pmap. [See PR#4120 for more details.]
1997-09-18 03:38:31 +00:00
8b680f206c
Need to flush the I-cache before jumping into just-loaded code.
...
Without this, boot programs fail with some PROM versions...
1997-09-18 01:47:08 +00:00
9ce899230a
After decommisioning a mapping, an IMB kinda needs to happen.
1997-09-18 01:08:56 +00:00
cd69e27594
Prototype alpha_implver(), and fix a think-o in a previous commit.
1997-09-17 23:33:28 +00:00
b806d39316
Implement a stub for the "implver" instruction, which returns the
...
implementation version of the processor.
1997-09-17 23:32:14 +00:00
8b0c39d09e
The additional linefeed appeared again... kill it.
1997-09-17 19:39:37 +00:00
a577f67769
Use common menu / parse functions.
...
Adapt to new console / exec_netbsd arguments.
1997-09-17 18:52:41 +00:00
a1fc367b4b
Cleanup for new libsa/bootp.c (unused global variables).
...
Do the vararg stuff right.
Remove the useless "no_bootp" variable.
1997-09-17 18:50:24 +00:00
5a1b04beab
Put bootfile name into "bootfile" before network initialization, for
...
use by BOOTP.
Put name of bootfile into "bootinfo" structure.
1997-09-17 18:47:13 +00:00
d9641ea06f
Use common menu / parsing functions.
...
Adapt to new console / exec_netbsd arguments.
1997-09-17 18:44:15 +00:00
23d58b46d3
Put name of booted file into a "bootinfo" structure.
...
(not for DOS files for now, we don't know the absolute path)
1997-09-17 18:40:33 +00:00
38b36ed152
-Use shared menu / parsing functions.
...
-Adapt to changed console and exec_netbsd arguments.
-Turn private "cd"-like behaviour into a regular command.
1997-09-17 18:37:58 +00:00
1d521976af
Put name of booted file into a "bootinfo" structure.
1997-09-17 18:32:50 +00:00
0c825594ef
Function to collect geometry and partitioning information about the
...
BIOS-known disks in a "bootinfo" structure (still experimental).
1997-09-17 18:30:51 +00:00
c65435feb3
"document" serial console support
1997-09-17 18:28:50 +00:00
a8c2622575
Collect information in a "bootinfo" structure.
1997-09-17 18:21:40 +00:00
c2095ccd48
Remove old SERIAL support, it will be done at a higher level now.
1997-09-17 18:10:51 +00:00
2fba0a4db7
Convert DOS error numbers into UNIX errno values.
1997-09-17 18:09:04 +00:00
4162c9025a
Do the vararg stuff cleanly.
...
Collect disk information in a "bootinfo" structure.
1997-09-17 18:08:13 +00:00
0851ea1331
Add now common menu / parsing functions.
...
Adapt to new console I/O functionality.
Update exec() arguments.
1997-09-17 18:04:21 +00:00
83ce8d9ef8
Use the "bootinfo" defined structures to collect information about boot
...
device/file and console setting, remove the old, limited, "xbootinfo".
Fix a printf() format warning in debug code.
1997-09-17 18:02:11 +00:00
f93967e407
add new files
1997-09-17 17:51:12 +00:00
dae95d6c0b
-extend serial console code to all 4 BIOS known interfaces
...
-optionally, use Martin's direct hardware access to serial lines
-optionally, new console autoselection method: select serial console
if a character is seen within 1 second
-move awaitkey() here, it can be shared by different bootloaders and
it is used by console autoselection
-collect information about console selection in a "bootinfo" defined
structure, for passing to the kernel
1997-09-17 17:48:00 +00:00
f7b795d3c0
Definitions and helper functions to collect information in the boot
...
loader (still experimental).
1997-09-17 17:39:29 +00:00
fb3350eb72
Console I/O functions for serial lines, accessing the hardware directly.
...
Allows higher baudrates than 9.6 and software flow control.
From Martin Husemann.
1997-09-17 17:31:41 +00:00
27d7edd928
Factor out functions for table driven boot menus and command line parsing
...
usable for different boot programs.
1997-09-17 17:13:02 +00:00
25aa241d8a
Use the private nfs.c instead of "nfswrapper".
...
Disable UDP checksums in the sample configuration, otherwise this doesn't
fit into the ROM.
1997-09-17 17:07:10 +00:00
7f4ef01688
Use the private nfs.c instead of "nfswrapper".
1997-09-17 17:04:28 +00:00
ac061ce8b1
Use a private NFS layer. This allows for more optimization than the
...
separated "nfswrapper.c"/"nfs.c".
This nfs.c differs from the stand/lib/libsa one in that it does not
have a separate mount() function - the mount is done in open().
1997-09-17 17:03:00 +00:00
3c46c18a00
Use the original bp_siaddr field as TFTP server. Allows to have
...
different TFTP and NFS servers.
Don't byteswap port number from UDP header back to network order - net.c
doesn't swap it anymore.
1997-09-17 16:57:07 +00:00
15e10104d5
Define the BWX-capable regions of the CIA chipset's address space (mem,
...
i/o, pci config space mode 0, pci config space mode 1) and the CIA
REV and CNFG CSRs.
1997-09-17 01:35:34 +00:00
879c4c5cf4
If the CIA revision is >= 2, read the CIA configuration register, and
...
remember its contents. Print out a bit of information about the chip,
including whether or not it supports the EV56 BWX instructions.
1997-09-17 01:34:18 +00:00
ed767a2402
Fix a typo in a comment.
1997-09-16 23:12:35 +00:00
87c1a08481
Add stubs for the Alpha Byte/Word Extension (BWX) instructions, present
...
on EV56 and later processors that have the "amask BWX" bit clear. These
instructions will be used to implement non-swizzle bus access functions
on newer systems, such as the new AlphaStation 500s with EV56 and 21172
PCI chipsets.
See "Alpha Architecture Handbook, Version 3", DEC order number EC-QD2KB-TE.
1997-09-16 23:09:10 +00:00
6fc0f07c30
Define the "integer miscellaneous" opcode and subfunctions.
1997-09-16 22:53:32 +00:00
149011c65b
Add support for disassembling the "integer miscellaneous" opcode subgroup.
1997-09-16 22:52:40 +00:00
718fb97e11
Support for the upcoming NetBSD/Amiga Hypercom driver family:
...
* support chip clocks != COM_FREQ, by introducing sc_frequency (for the
mainline code) and adding a frequency parameter right after the rate
parameter to comcnattach() and com_kgdb_attach().
- Make com_isa and com_multi initialize sc_frequency to COM_FREQ.
- Make i386/machdep.c and alpha/dec_xxx.c call com*attach() with the freq.
parameter.
* supio_attach_args get two more fields: a sc_ipl and a sc_arg, both ints.
- com_supio uses the first for interupt establishment (all childs will, as
soon as they exist) and the 2nd for sc_frequency.
- drsupio passes sc_ipl alway as 5, and for the "com"s, sc_arg as 16*115200
- hyper will pass sc_ipl as 6, and sc_arg as 16 * 460800
1997-09-16 20:34:23 +00:00
d1b4b49231
- Use PALcode ops names defined in <machine/pal.h>.
...
- Fix a few bugs in the software single-stepping support code, where
VMS PALcode ops were being checked, rather than OSF/1 PALcode ops,
causing erroneous results in the "exception return" and "unconditional
branch" predicates.
- Add the BWX instructions ("ldbu", "ldwu", "stb", "stw") to the
"load" and "store" predicates.
1997-09-16 19:07:19 +00:00
a14bab3438
Don't define another copy of the PALcode ops here; direct readers to
...
<machine/pal.h>.
1997-09-16 19:03:22 +00:00
e7c2d59885
Fix an oversight in the last commit.
1997-09-16 19:02:13 +00:00
83bd421ad4
Set up base address of ASC for IIfx, per GtMFH.
1997-09-16 16:28:07 +00:00
eb72408374
Clean up comments.
1997-09-16 16:13:47 +00:00
8dbfee6073
Add a comment about the sccA address on the IIfx.
1997-09-16 15:51:09 +00:00
19e555febb
Check booter flags for a bit that tells us whether we should construct
...
bootdev from the SCSI ID passed in via the Booter's environment.
(Does the right thing for older versions of the Booter.)
1997-09-16 14:35:32 +00:00
0599db7897
- Define bits used in the "amask" instruction.
...
- Define processor family IDs returned by the "implver" instruction.
- Prototype alpha_amask().
1997-09-16 06:57:12 +00:00
9faf00ea6a
Implement alpha_amask(), a stub which reads the "architecture feature mask"
...
using the "amask" instruction.
1997-09-16 06:54:01 +00:00
4fe999c6bf
- Add the "amask" and "implver" operate subfunctions.
...
- Add the "ldbu", "ldwu", "stb", and "stw" major opcodes (BWX instructions).
1997-09-16 06:52:48 +00:00
fc80b40481
- Rewrite the functions that provide opcode subfunction names to make it
...
easier to add instructions that the disassembler doesn't know about
(the opcode subfunction number is now printed).
- Add the "amask" and "implver" operate subfunctions.
- Add the "ldbu", "ldwu", "stb", and "stw" major opcodes (BWX instructions).
1997-09-16 06:52:16 +00:00
d1fbc82e28
From page 6-9 of "Alpha AXP Architecture Reference Manual, Second Edition":
...
An IMB intruction must be executed after software or I/O devices
write into the instruction stream or modify the instruction
stream virtual address mapping, and before the new value is
fetched as an instruction.
We were missing calls to IMB after mappings were changed, which caused
systems with large I-caches (e.g. my AlphaStation 500) to fail miserably
when mapping in new pages of program text, or when context switching
(I couldn't even get the shell from init!).
1997-09-16 01:52:00 +00:00
37b8edbeac
In addition to MAS_ABT, check TAR_ABT when doing configuration space
...
reads. This is necessary because of newer AlphaStation firmware doing
the Wrong Thing with target aborts behind PCI-PCI bridges, much like they
do the Wrong Thing with master aborts. Reported by Matthias Drochner.
1997-09-15 23:31:15 +00:00
12f6c5aba1
Make sure to clear MAS_ABT if we received one.
1997-09-15 23:01:29 +00:00
3c3c6a3b31
Use the symbolic name for "received master abort".
1997-09-15 22:35:54 +00:00
8ff22715e8
Define bits in the CIA_ERR register.
1997-09-15 22:34:38 +00:00
dc914f2ee7
Only create verbose delay loop calibration message for DIAGNOSTIC kernels.
1997-09-15 22:17:55 +00:00
33d1f0d190
A few more boards. This really should be split into a seperate file, only
...
active if the kernel has ZBUS_VERBOSE similar to PCI, EISA, (podulebus?),
but I don't have that stuff ready yet.
1997-09-15 21:37:35 +00:00
aa998af35c
Hard-code a couple of sun4 cpu-clock speeds.
...
Fix a printf formatting glitch.
1997-09-15 20:52:36 +00:00
00a1b6300f
Add DCFA() definitions.
1997-09-15 11:12:13 +00:00
571340263d
Small readability update.
1997-09-15 11:08:38 +00:00
409812c25c
Define isabus by default on the Hades.
1997-09-15 10:51:20 +00:00
b5004e4ce1
Call the device close routine when we're done reading.
1997-09-14 19:28:17 +00:00
5ba6b94ba6
Do not use KERNBASE to calculate the `end of symbols' location. Instead
...
use the `a_entry' field from the kernel's header as a base.
Pass on a new DDB magic number to the kernel, so kernels linked for a
different KERNBASE value can apply a correction when booted from old
bootblocks.
1997-09-14 19:27:21 +00:00
4969489cb6
Define a new DDB magic number to pass to the kernel.
1997-09-14 19:22:55 +00:00
383448522d
Refer to KERNBASE instead of its current numerical value in comments
...
and some early debugging code.
1997-09-14 19:20:48 +00:00
dc4f93c2a1
Collect sbus status and configuration registers in `struct sbusreg'.
1997-09-14 19:17:25 +00:00
e4a198d193
Move sbus fields to sbusreg.h where they belong.
1997-09-14 19:16:04 +00:00
a3140bf9f2
NetBSD 1.2 and earlier sparc bootblocks have KERNBASE compiled in. This
...
prevents booting DDB kernels that are built with a different value of KERNBASE.
Apply a correction based on the magic number passed in by the bootblocks.
New bootblocks without the hard-coded KERNBASE reference will be assigned
a new magic number.
1997-09-13 20:36:48 +00:00
c635b25325
In kbdattach() (the pseudo-device attach routine) wait for the keyboard
...
reset sequence to complete. Just sending the reset command and rushing
off -- like it used to do -- might cause the keyboard's response to get
lost in case the remaining kernel initialization decides to interact
with the console (RB_ASK!) by calling cngetc(), which goes off polling
within the PROM.
1997-09-13 19:12:18 +00:00
e97c5f6c50
Update the model string for current reality.
1997-09-13 10:09:39 +00:00
9a5f8236b5
Don't panic if we receive a Processor Correctable Error or a System
...
Correctable Error; report them, instead.
XXX Need a platform-specific machine check handler so we can decode the
logout area on such errors.
1997-09-13 10:01:33 +00:00
12b0c2a20a
The Alpha console uses BOOTP for network booting, so the NetBSD kernel
...
should, too. Enable the BOOTP support in nfs_boot().
1997-09-13 07:42:01 +00:00
f784e8dc15
Apparently, new AlphaStation 500/600 firmware has the same problem with
...
PCI master aborts as eb164 firmware, so use the same workaround mechanism
on all system types (clear error register's master abort bit, and check
it after accessing configuration space), not just eb164's.
This also fixes a bug on eb164's - when making the Alpha port compile
again, I made an error that caused this to not be used on eb164 systems,
either. Thanks to Matt Jacob for pointing out this goof.
1997-09-13 05:58:07 +00:00
a9155c5057
Set the status word as well, and remove a bogus comment.
1997-09-12 10:29:20 +00:00
701aa39854
Oops; didn't delete two retval[] usages in setregs().
1997-09-12 09:59:53 +00:00
cba224ed23
FPCOPROC is no longer used here.
1997-09-12 09:29:13 +00:00
4e5b47eba3
fputype is defined in locore.s now.
1997-09-12 09:27:49 +00:00
11393fe5b9
Add and use fputype. Optimize floating point save/restore routines a bit more
...
if only one CPU type is defined. Eliminate FPCOPROC. Merge some of the
68060 floating point stuff from the x68k port.
1997-09-12 09:25:36 +00:00
5933da103c
Add and use fputype. Optimize floating point save/restore routines a bit more
...
if only one CPU type is defined. Eliminate FPCOPROC.
1997-09-12 09:23:18 +00:00
27f2065c2c
Update syscall() and setregs() in the wake of the recent execve() changes.
1997-09-12 08:55:01 +00:00
cd9a968cb7
Fix a test that should be on fputype rather than cputype.
1997-09-12 08:41:55 +00:00
8a42aeac7b
GC old comment.
1997-09-12 08:35:15 +00:00
8a8fa1ee59
Eliminate some uses of FPCOPROC.
1997-09-12 08:19:00 +00:00
1192cdbe7e
FPCOPROC is already in the Makefile; no need for it here.
1997-09-12 08:14:06 +00:00
30073771b6
Move definition of FPCOPROC into the Makefile, since it's always required.
1997-09-12 08:13:26 +00:00
e9f392b0a9
Eliminate some uses of FPCOPROC.
1997-09-12 08:08:50 +00:00
55582e5bc2
The FPCOPROC option no longer exists.
1997-09-12 08:04:12 +00:00
49f0bbb105
Nuke Locore.c. It's way too out of date to be useful at this point.
1997-09-12 07:59:20 +00:00
895a1eced4
Fix an error from when Locore.c was removed.
1997-09-12 07:56:37 +00:00
50cfb2fcdd
Kill vestiges of Locore.c.
1997-09-12 07:55:17 +00:00
982f24e698
Always initialize all registers in setregs().
1997-09-12 07:00:30 +00:00
42c101eb00
Fix execve(2) and *setregs() interfaces so emulations can set registers in a
...
more correct way. (See tech-kern.)
1997-09-12 05:48:08 +00:00
25f153bb22
Add fe0.
1997-09-12 05:22:55 +00:00
73b4fdacad
Initialize all registers in setregs().
1997-09-12 05:01:09 +00:00
d0917c65e9
Add an ibcs2_setregs().
...
XXX Current implementation is a horrible kluge.
1997-09-11 23:07:25 +00:00
99a6404735
Add an ibcs2_setregs().
1997-09-11 23:05:30 +00:00
16a8787248
Fix execve(2) and *setregs() interfaces so emulations can set registers in a
...
more correct way. (See tech-kern.)
1997-09-11 23:01:44 +00:00
44f6ba6c55
VM_MAX_ADDRESS is the user max address -- adjust
1997-09-11 14:01:07 +00:00
aeec7a4ecc
Turn off "branch folding" in microsparc II processors. This seems to
...
avoid strange panics happening. Patch suggested by Chris Torek.
1997-09-10 19:11:23 +00:00
b1fe1c2452
Generalize somewhat (now works for alpha too).
1997-09-10 16:25:07 +00:00
5dd9e25dca
For consistency: VIA_initialize() -> via_init()
1997-09-10 04:38:47 +00:00
d1feb13390
Move VIA_initialize() from configure() to locore.s, shortly after
...
setting up and enabling the MMU. This has the effect of ensuring
that any stray interrupts that get posted before the IPL is lowered
will be handled gracefully, i.e. without an access fault or illegal
instruction exception.
1997-09-10 04:22:33 +00:00
eb3c36eb89
Add ROM vectors and I/O info for the IIfx.
1997-09-10 03:43:48 +00:00
d766a8aa21
Remove some vestiges of BDB.
1997-09-09 21:42:38 +00:00
0bd088474a
Turn on D_DSBL_WRINVAL on `ledma'.
1997-09-09 20:54:48 +00:00
01c7934554
Define, implement, and use oss_intr().
1997-09-09 17:37:10 +00:00
6da60facfb
GC a bunch of NEWCONFIG stuff.
1997-09-07 13:05:39 +00:00
892d336277
Increase FDC_MAXIOSIZE to MAXBSIZE, now that we can handle it.
1997-09-07 13:03:10 +00:00
fba474f53a
add prototype definition for DHCP support
1997-09-06 14:32:31 +00:00
969e506de4
Oops, last change made "make depend" work incompletely. Don't define
...
a "depend" rule here.
1997-09-06 14:26:47 +00:00
281398581a
-Wall fixes
1997-09-06 14:08:27 +00:00
3b191b29c0
enable -Wall
1997-09-06 14:07:57 +00:00
be8a78e9b5
-use DHCP extensions in bootp()
...
-enable -Wall
1997-09-06 14:06:53 +00:00
80d9738db8
-Wall fixes
1997-09-06 14:03:55 +00:00
d99aa8efc0
Collect prototypes here.
1997-09-06 14:02:51 +00:00
7546d66094
Make sure the <machine/*.h> includes come from current kernel sources,
...
not from installed userland.
1997-09-06 14:02:13 +00:00
b8b28812be
Add missing keypad entry for '+' and correct a comment. From pr#3893.
1997-09-06 12:41:10 +00:00
da80f6c913
Catch bus error in sbc_pdma_out() and panic with a reasonable
...
error message.
1997-09-06 07:53:14 +00:00
18883bf3fc
In itematch(), check to see if the framebuffer PA matches either the
...
$Fssxxxxx 1MB slot space documented in the old Inside Macintosh, or the
$Fs0xxxxx 1MB slot space documented in the new IM and Guide to Macintosh
Family Hardware.
1997-09-06 06:51:54 +00:00
ed2ec4869c
Update for Chris Demetriou's changes made to the bus.h interface:
...
- bus_space_copy -> bus_space_copy_region (for consistency)
- "cacheable" argument becomes a "flags" argument instead, with
BUS_SPACE_MAP_CACHEABLE and BUS_SPACE_MAP_LINEAR flags currently
defined.
1997-09-06 05:44:07 +00:00
1aa35e94d4
s/BUS_BARRIER/BUS_SPACE_BARRIER/g
1997-09-06 05:21:14 +00:00
613ee19c60
Add DDB.
1997-09-06 02:04:18 +00:00
1f6a8f7d03
Enable DDB.
1997-09-06 02:03:32 +00:00
66fdddf6aa
Add DDB files.
1997-09-06 02:03:11 +00:00
9dcf694bd2
Prototype db_register_value().
1997-09-06 02:02:25 +00:00
998d79d26a
Add support for DDB (in-kernel debugger) to NetBSD/alpha, based on
...
such code for Mach 3's Alpha port. Initially reworked for NetBSD/alpha
by Chris Demetriou, and then heavily hacked on by me. Works, but is still
a little rough around the edges. Known problems:
- Error recovery could be improved a bit.
- Back traces don't work.
- Single-stepping can be flaky, at times. (Alpha doesn't have hardware
support for single-stepping, and I'm not entirely convinced the
MI DDB software-emulated single-stepping logic is 100% correct.)
- Logic for when to drop into DDB needs some improvement.
1997-09-06 02:00:48 +00:00
36f209b762
Split off PALcode functions into their own header file.
1997-09-06 01:23:52 +00:00
0b471e545e
add bits for %cr4 and cpu_feature [from freebsd and www.sandpile.org]
1997-09-05 22:28:12 +00:00
302dad0aaa
add invlpg, and rcr4/lcr4
1997-09-05 22:25:20 +00:00
7df7a43ce7
When loading a symbol section, make sure it is aligned.
1997-09-05 21:50:34 +00:00
ba8becebfc
installbood_cd9660 no longer exists.
1997-09-05 20:20:17 +00:00
d2e3710fa9
Cosmetic (s/sun3_/_/) to be closer to the sun3x version.
1997-09-05 04:51:06 +00:00
6220d3efdf
Add a comment about IDPROM_BASE (XXX)
1997-09-05 04:47:43 +00:00
c04589c8a8
Make stand/Makefile.inc work with obj directories. (Fixes PR 4014)
1997-09-05 04:31:50 +00:00
2f657a6266
Add some debugging code to log sgmap activities. Also, make sure that
...
we return "no valid mappings" if there is an error while loading the
sgmap.
1997-09-05 02:21:49 +00:00
2ecccdc05f
Define Status 0 and Status 1 registers.
1997-09-05 02:14:31 +00:00
55800b610a
Implement bus_dmamem_mmap().
1997-09-05 02:05:37 +00:00
dc50e810ea
Implement bus_dmamem_mmap().
1997-09-05 01:44:42 +00:00
093be63832
Back out last commit; it interfered with NuBus video, and will
...
have to be reworked.
1997-09-04 00:54:04 +00:00
6f4f08b8b2
Add a few more PALcode operations, as documented in pages (II-B) 2-1 through
...
(II-B) 2-33 of the Alpha AXP Architecture Reference Manual, Second Edition:
* rdps - Read Processor Status, needed by spl* functions.
* cflush - Cache Flush
* rdval - Read System Value
* wripir - Write Interprocessor Interrupt Request
* wrval - Write System Value
cflush, rdval, wripir, and wrval are used in multi-processor environments.
1997-09-03 23:09:04 +00:00
032358ab33
From hp300 pmap: use mycroft's pv_entry allocator (from i386 port).
1997-09-03 19:07:32 +00:00
7883fba4bf
Two video-related changes:
...
- Only set mac68k_vidphys if we're on a machine that we couldn't get
the Mac OS memory map.
- If we could get the Mac OS memory map, use the framebuffer size found
by get_mapping() rather than the size calculated using the Booter
environment.
1997-09-03 06:40:15 +00:00
e68adcb18e
Initialize the bus error and address error vectors explicitly for all
...
CPUs, and set up the VBR just to be certain.
1997-09-03 06:34:08 +00:00
f30496c3f2
When identifying the CPU, print the scaled factor resulting from
...
calibration of the delay() loop.
1997-09-03 06:28:55 +00:00
c0f620b961
Don't initialize the bus error and address error vectors; as we do that
...
in the startup code already.
1997-09-03 06:16:24 +00:00
c4ab61a0cf
Eliminate the use of the register keyword, and use standard
...
type names. Also, eliminate an unnecessary DEBUG printf().
1997-09-03 06:14:42 +00:00
f03ded039c
Update from hp300 pmap: define an active_user_pmap() macro and use it.
1997-09-03 00:58:13 +00:00
0f5f0e115a
Define a cdev_satlink_init(). XXX This should be done in an MI header file.
1997-09-03 00:25:01 +00:00
6cf58542f9
PMAP_{,DE}ACTIVATE() are no longer exported from the Utah-derived pmap.
1997-09-02 23:52:55 +00:00
243aa23148
Add __KERNEL_RCSID() and definitions for ISA satlink driver.
1997-09-02 23:41:04 +00:00
44e33a2f5f
Update for changes to how bus space tags are initialized.
1997-09-02 20:43:07 +00:00
90798596fe
Remove references to vm_pmap.
1997-09-02 20:37:23 +00:00
e7bb7bdc4b
Remove references to vm_pmap.
1997-09-02 20:11:24 +00:00
f203067ae3
Adjust for changes to bus space tag initialization.
1997-09-02 20:10:28 +00:00
a71cecbec3
Fix a typo.
1997-09-02 20:08:02 +00:00
991f4ebc72
cia_bus_ -> cia_swiz_bus_
1997-09-02 20:07:20 +00:00
80e3db443f
Apply a change made to other PCI chipsets:
...
don't expect/provide pci_decompose_tag to be a MI, public function. It
wasn't intended to be to begin with, and uses of it (e.g. the one in the
'de' driver) are quite likely to be incorrect.
1997-09-02 20:05:28 +00:00
3735c7d1d7
Fix a think-o.
1997-09-02 19:39:15 +00:00
df1dcf81d0
Oops, missed one.
1997-09-02 19:18:20 +00:00
cc5eaab25b
More garbage-collection.
1997-09-02 19:16:32 +00:00
b2a8424bb5
Garbage-collect loadustp(); the functionality has moved to pmap.old.c
1997-09-02 19:07:22 +00:00
2c5c631b71
- Make the pmap_activate() and pmap_deactivate() interfaces consistent my
...
passing them a proc *, which encapsulates all of the information necessary
to activate an address space.
- Garbage-collect pmap->pm_stchanged; it's not really used for anything.
1997-09-02 19:06:13 +00:00
bf232f7a37
Make the pmap_activate() and pmap_deactivate() interfaces consistent my
...
passing them a proc *, which encapsulates all of the information necessary
to activate an address space.
1997-09-02 19:04:57 +00:00
a47a8a25d6
Adjust for an interface change in a not-NEW_PMAP case in cpu_fork().
1997-09-02 19:03:58 +00:00
f1373b949c
- Make the pmap_activate() and pmap_deactivate() interfaces consistent my
...
passing them a proc *, which encapsulates all of the information necessary
to activate an address space.
- Garbage-collect pmap->pm_stchanged; it's not really used for anything.
1997-09-02 19:00:53 +00:00
5042993a22
- Make the pmap_activate() and pmap_deactivate() interfaces consistent my
...
passing them a proc *, which encapsulates all of the information necessary
to activate an address space.
- Clean up some debugging code.
1997-09-02 18:59:02 +00:00
364d6a31a7
Adjust some NEW_PMAP code for a slight interface change.
1997-09-02 18:54:28 +00:00
511e46c568
Clean up the context switching code a bit:
...
- Marco-ize the 3 instructions that actually switch to the new process
context.
- Unify (except for the pmap_deactivate() call) the NEW_PMAP and not-NEW_PMAP
versions of cpu_switch(), and clean up some comments.
- Tidy up the not-NEW_PMAP bits of switch_exit().
1997-09-02 18:53:26 +00:00
d316987784
Garbage-collect VM_PMAP_STPTE, USTP_OFFSET, VM_PMAP. Define VM_MAP_PMAP
...
instead.
1997-09-02 18:48:58 +00:00
b7b3955ce0
Fix a typo: ALPHA_PTE_WRITE needs to include the "user write" bit.
1997-09-02 14:29:37 +00:00
6caf625430
Note that a2 and a3 contain bootinfo information passed from the boot
...
program to alpha_init().
1997-09-02 14:29:00 +00:00
d95ac139e0
Oops, wrap cpu_decl()s inside #ifdef _KERNEL/#endif.
1997-09-02 14:25:34 +00:00
8b6e894364
Clean this up a bit; defopt has rendered the #undef hacks unnecessary.
...
Also, put the cpu_decl()s in cpuconf.h, so that platform support files
can pull in the prototypes from there, and pull in options for those
systems for which there is code in the source tree.
1997-09-02 14:19:29 +00:00
b7c1c1e321
Pull in alpha/cpuconf.c
1997-09-02 14:06:02 +00:00
5c72d6a933
Garbage-collect.
1997-09-02 14:03:10 +00:00
e79009b830
Ressurect from the Attic.
1997-09-02 14:00:11 +00:00
9db8b6018f
Make a note about option headers.
1997-09-02 13:42:49 +00:00
1df0782d87
Pull in DEC_3000_300 and DEC_3000_500 options.
1997-09-02 13:29:17 +00:00
a4cef84ac7
Pull in DEC_3000_300 option.
1997-09-02 13:26:42 +00:00
529d790161
Pull in DEC_AXPPCI_33 option.
1997-09-02 13:25:36 +00:00
cb32cf1ece
Pull in DEC_EB164 and DEC_KN20AA options.
1997-09-02 13:24:48 +00:00
b57ee951d0
Pull in DEC_2100_A50 and DEC_EB64PLUS options.
1997-09-02 13:23:56 +00:00
49a2bcd443
Pull in FIX_UNALIGNED_VAX_FP option.
1997-09-02 13:22:53 +00:00
693b3e7262
Nuke the idea of <machine/options.h>. It completely defeats the purpose
...
of fine-grain option dependencies.
1997-09-02 13:17:47 +00:00
e234ed15b6
Fix oversight in a previous commit.
1997-09-02 12:54:27 +00:00
375ad27ed8
- Garbage-collect all DMA-related initialization, calling a separate
...
*_dma_init() function instead.
- Pass the appropriate bus dma tag to children.
1997-09-02 12:51:20 +00:00
3ac7ac6e63
Garbage-collect.
1997-09-02 12:43:22 +00:00
aa7a2876e6
Treat bus space tags more like pci chipset tags and bus dma tags: allocate
...
them statically within a chipset's state structure, and pass them to
the *_bus_{io,mem}_init() functions.
1997-09-02 12:40:18 +00:00
225274f8b4
Add BUS_SPACE_MAP_* macro's.
1997-09-02 11:19:02 +00:00
fd01db8b74
Use more complete #include directives when pulling in the chipdep
...
functions.
1997-09-02 11:09:51 +00:00
9199b6645b
Clean up RCS IDs.
1997-09-02 10:56:52 +00:00
d450130943
Adjust for new names for the PCI i/o and mem swizzle-style access
...
function files.
1997-09-02 10:43:27 +00:00
8f286ca7f3
Renamed to pci_swiz_bus_{io,mem}_chipdep.c by repository copy.
1997-09-02 10:39:15 +00:00
8998fa1198
Revive these files from the Attic.
1997-09-02 10:26:55 +00:00
034f64c0da
Set fixtick to (1000000 % hz) when NTP is configured.
1997-09-01 08:05:05 +00:00
240f9f0804
Bring db_{read,write}_bytes() prototypes in scope.
...
Move Debugger() within `#ifdef DDB'
1997-09-01 00:16:31 +00:00
7d7a8e5773
Switch to MI kgdb code.
1997-08-31 21:29:16 +00:00
84877e89f6
Allow a BREAK to cause a kgdb_connect().
1997-08-31 21:26:37 +00:00
7950e785f9
Switch to MI kgdb code.
1997-08-31 21:22:44 +00:00
2b1e7bab51
pmap_writetext(): use context 0.
1997-08-31 21:08:03 +00:00
7a5cd3368f
We may not open the 'a' partition here, as there are Amiga partition tables
...
without an 'a' partition. We open the RAW_PART partition instead.
Without this, a boot partition on the 'b' or later partition of such a disk
won't be found.
1997-08-31 16:33:13 +00:00
59d6043196
Do run-time determination whether to save the TC value for AV
...
Macs; this way at least those models can configure intvid0.
From Dave Huang.
1997-08-30 22:29:10 +00:00
8c578dc960
Pass down bus_dma_tag_t's as appropriate (per Jason's bus_dma code).
1997-08-30 06:53:57 +00:00
d4b3029855
Set the I/O and memory enable flags for the main PCI bus.
1997-08-30 06:52:55 +00:00
5342b11519
Replace copyright notice.
1997-08-30 01:51:02 +00:00
3220411801
Define PAL_cflush, PAL_ipir, and PAL_OSF1_wrperfmon PALcode operations.
1997-08-29 23:17:37 +00:00
42c4123e4d
Define 2 md devices.
1997-08-29 19:52:08 +00:00
16bdafc3a5
Pull in Scott Reynolds' version of _splraise(). Also do a bit of typographic
...
cleanup while visting this file.
1997-08-29 19:47:52 +00:00
417cce7c06
Fix typo(?) in dlmiss handler ("store" bit erronenously set). From
...
Kazuki Sakamoto <sakamoto@cec.co.jp>, PR #3583 .
1997-08-29 19:11:07 +00:00
4058521515
add KMEMSTATS and sync GENERIC, INSTALL, and DISKLESS
1997-08-28 08:00:12 +00:00
a79408b6c7
Change match routine to use "audio" as the ROM name.
1997-08-27 22:42:23 +00:00
c58d387b0f
Fix prototype for amd7930_set_params.
1997-08-27 22:33:59 +00:00
e7c8f94f9d
Yet another BROKEN removed, and another small cleanup.
1997-08-27 20:41:30 +00:00
1dc1561ebc
Rename the _probe function to _match, and remove the
...
#ifdef _BROKEN_INDIRECT_CONFIG which we dont need here.
Thanks to Bernd Ernesti for pointing this out.
1997-08-27 20:35:46 +00:00
2f824e16e8
Oops, forgot this in last kilocommit:
...
Attach com at drsupio, drsupio at mainbus, and make
the ttyC0 stuff refer to the com driver.
1997-08-27 20:18:19 +00:00
0564e80e3e
This is no longer needed.
1997-08-27 19:37:30 +00:00
f7c9a70a19
Define supio, a direct bus with a single locator, the port number. This
...
is for "standard PC i/o stuff" at known and constant locations, e.g. when
multi-io chips are used on non-ISA mainboards.
Implement drsupio.c, the DraCo version of this.
Attach the generic com.c to this bus.
Remove the old drcom hack.
1997-08-27 19:32:47 +00:00
45a8ec2d22
Amiga port bus.h. Currenlty, only the _1 functions are implemented.
1997-08-27 18:52:57 +00:00
2e45e81622
machine/intr.h for the Amiga port. Mostly a wrapper around other includes.
1997-08-27 18:41:25 +00:00
47e8019573
Add __GENERIC_SOFT_INTERRUPTS implementation.
...
Currently, this is only kind of a wrapper around the *_sicallback() function
family. This way, we'll only break the new driver if it doesn't work.
After more drivers are converted, we'll change it to be the other way round.
1997-08-27 18:31:14 +00:00
6f3bab1f59
Merge scsipi branch in the mainline. This add support for ATAPI devices
...
(currently only CD-ROM drives on i386). The sys/dev/scsipi system provides 2
busses to which devices can attach (scsibus and atapibus). This needed to
change some include files and structure names in the low level scsi drivers.
1997-08-27 11:22:52 +00:00
c9f11609e3
According to Andre Lange, the Hades has the DTR/RTS lines exchanged on
...
the 68901 UART-port due to a PCB error. Take care of this.
1997-08-27 06:59:19 +00:00
a905a75ff7
Number the slots 0&1 instead of 1&2 .
1997-08-27 06:56:14 +00:00
c8c7fe38ca
Add the isa-bus.
1997-08-27 06:52:46 +00:00
2ca332c7bc
Add a char entry for md and add it to the chartoblk table. This fixes
...
the problem that kernfs was unable to determine the root device while
booting from the install floppy.
1997-08-27 06:21:06 +00:00
d0301b58ee
Don't enable the dma-interrupt while polling for dma to end. This sometimes
...
caused a system panic on the Hades while probing the SCSI devices.
1997-08-27 06:16:49 +00:00
a6a1f307de
sync with GENERIC 1.96, no functional change
1997-08-27 04:56:38 +00:00
a50d4ba893
XXX Add a drq2 locator for the ISA bus. Many sound cards need
...
two DMA channels to do e.g. full-duplex. This allows
a way of specifying the second channel in a sane way.
THIS IS TEMPORARY. The drq2 locator will go away when
the locator system has been changed to allow multiple
values per locator.
1997-08-26 19:26:38 +00:00
a153e98871
Recognize Cyrix M2
1997-08-26 18:56:40 +00:00
d792a4aa54
Activate SCSIVERBOSE by default.
1997-08-26 18:39:02 +00:00
75a4512f7f
Notify drivers that we "prefer" I/O mapped space, per discussion with
...
Chris Demetriou and Matt Thomas, some two or three months ago. (This hint
is used by the latest "de" driver.)
1997-08-26 03:14:06 +00:00
9ffe59d049
In i386_mem_add_mapping(), don't bother calling pmap_changebit() to mark a
...
device memory mapping cacheable/non-cacheable:
- PG_N doesn't exist on the 386.
- pmap_changebit() only deals with managed pages.
Basically, calling it is unnecessary, and never did anything. Pointed
out by Chuck Cranor, and further discussed with Frank van der Linden.
Also, add a comment about why we don't mark pages non-cacheable in
_bus_dmamem_map().
1997-08-25 23:02:25 +00:00
38f15737fd
Protect access to kmem_map with splimp()/splx(). From Chuck Cranor.
1997-08-25 21:17:48 +00:00
6616d47838
- Change audio_hw_if a little: set_param now sets the play and record modes
...
at the same time instead by using two different calls. This enables
it to check more easily if the combined mode is all right.
- Improve the error checking in audio.c.
- Add a new audio property, AUDIO_PROP_INDEPENDENT, show if the
play and record settings are independent.
- Fix some buglets in audio.c.
1997-08-24 22:31:23 +00:00
9518da7563
Remove over-sensitive sanity check for console port == KGDB port.
1997-08-24 09:38:19 +00:00
ce0a826c55
fix various bogons: copy SCSIVERBOSE option (still commented out) and ISA lc
...
driver to ALPHA. Also, sort them into their respective lists correctly,
rather than punting completely (SCSIVERBOSE), or mis-sorting(!) (lc).
1997-08-24 06:40:18 +00:00
1173f77359
fix spaces/tabs lossage: if we're going to do "options<space><tab>", be
...
consistent about it (fix it in all files)! Also, there's no point at all
in doing "file-system<space><tab>", so kill the spaces.
1997-08-24 06:37:12 +00:00
6ac7f6248f
add a before tab to SCSIVERBOSE
1997-08-23 19:16:06 +00:00
44224e6fd5
Adapt to serial console attachment changes.
1997-08-23 14:28:16 +00:00
350184a9b7
Remove unneeded dev/cninit.c.
1997-08-23 14:26:46 +00:00
01930ff909
Update prototype options for serial console / KGDB for new reality.
...
"option\t" -> "option \t", as wished by Bernd Ernesti.
1997-08-23 14:25:55 +00:00
dfbc80bd71
Delete unused constab[].
1997-08-23 14:22:59 +00:00
2f05375163
Use functions provided by the drivers to initialize and attach console
...
and KGDB. Make port address, speed and (7/8bit,parity,stopbits) for serial
lines configurable.
1997-08-23 14:22:03 +00:00
d09a42059f
Put all console initialization into 1 exported function (pccnattach()).
...
Delay setting of cn_tab->cn_dev until autoconfiguration attach
to get the minor number right. (not really needed, but for
consistency with pccons and serial consoles)
Comment out unused pccnprobe() and pccninit().
XXX I didn't use "#if PCVT_NETBSD > ???" anymore, nor separated from
FreeBSD. The driver is not centrally maintained anyway.
1997-08-23 14:17:46 +00:00
fe882d2810
Put all console initialization into 1 exported function (pccnattach()).
...
Delay setting of cn_tab->cn_dev until autoconfiguration attach
to get the minor number right.
Delete unused pccnprobe() and pccninit().
1997-08-23 14:10:12 +00:00
dc91486be3
bootp vs. mop: don't clobber `netboot' flag.
1997-08-23 10:18:33 +00:00
423eab6e13
Stop people from trying to build the obsolete boot blocks by accident.
1997-08-22 21:53:00 +00:00
556cf1abc0
Make it possible for audio to attach to audioamd.
1997-08-22 11:45:06 +00:00
fc2e81c6d5
lie to the compiler when doing mkdep so that it depends .s files correctly.
1997-08-22 06:37:17 +00:00
4cb1ba2dac
Make this compile again when we only specify a machine with the
...
HP MMU (320, 350).
1997-08-21 18:12:34 +00:00
1a7afa3853
add commented out reference SCSIVERBOSE option
1997-08-20 18:38:13 +00:00
0e3c7b7f44
Commented out SCSIVERBOSE option; reference
1997-08-20 18:35:55 +00:00
e153e51fa3
Make "genprom" work in objdir.
...
Minor cleanup to ease bootcode development at non-standard locations.
Closes PR port-i386/4013 by Luke Mewburn.
1997-08-20 16:53:30 +00:00
43bc0b92d2
Turn DDB on by default in GENERIC kernel; turn DDB_ONPANIC off.
...
Remove obsolete comments.
1997-08-20 04:33:04 +00:00
d2ecd3da2a
update based on NFSINSTALL.
1997-08-20 04:22:41 +00:00
378facc384
consistent whitespace after "options".
1997-08-20 04:21:28 +00:00
e14d1d4768
Move SSIZE and DELAY() definitions to sys/arch/mips/include/mips_param.h.
...
Update comment in pmax/include/param.h (pr 3988).
1997-08-20 03:47:17 +00:00
332ad95e76
Change the MI audio driver so it attaches to the MD driver in the
...
normal way. This requires adding a line to the config files to
get audio to work again.
1997-08-19 23:49:33 +00:00
a44c1f66a7
Change "it's" to "it is" inside assembler comments to
...
stop "unterminated character constant" messages from `mkdep'.
1997-08-18 22:44:01 +00:00
af6b181686
Fix typo in getting the 040 access fault address, noticed by
...
Allen Briggs in the mac68k locore.s
1997-08-18 17:52:48 +00:00
5170e3eccc
Use the free-running microsecond counter on the Maxine for high-resolution
...
clock.
1997-08-17 18:13:22 +00:00
4c88f43717
Get $ra contents from the proper location in the exception/interrupt frames.
...
Use DDB symbols if available for stack traceback.
1997-08-17 17:02:07 +00:00
549e36420e
Display jump and branch target with symbols if available.
...
Clean up indentation - seems to have gotten messed up when the mini-debug
routine was added.
1997-08-17 16:58:53 +00:00
748703e737
Correct the check for a recovered error (I did it wrong the first time).
1997-08-17 16:51:21 +00:00
e39cac5a38
Get the correct fault address on a bus error on a 68040.
1997-08-16 23:10:49 +00:00
23d0cae1eb
It helps streaming performance substantially to enable bursts and more up hose
...
packets. It's not clear whether latency will be affected much. It could be.
However, for the time being, getting full rates out of HIPPI or SCSI are what
interests us at NASA, so we'll hew to this bias.
1997-08-16 01:18:30 +00:00
92995a3a9f
a minor bit of cleanup
1997-08-16 01:16:33 +00:00
ecd1b40ab3
Add some PCIA_CTL defines.
1997-08-16 01:14:32 +00:00
419960bd0e
Changes for PCI Qlogic ISP2100 meant a few minor changes.
1997-08-16 00:33:04 +00:00
51ed105af6
comment out APM -- it hurts some systems during install.
1997-08-15 21:44:31 +00:00
d540ff911c
wrap bus_space I/O tag checks with #ifdef DIAGNOSTIC.
...
wrap actual read port map/unmap with #ifdef _KERNEL, so userland probe
code will still work.
1997-08-15 06:48:29 +00:00
efecf08fef
Sync with bus_space(9):
...
* make map and alloc take 'flags' rather than 'cacheable,' for
more flexibility.
* rename BUS_BARRIER_* to BUS_SPACE_BARRIER_*, for consistency.
* rename bus_space_copy_* to bus_space_copy_region_* and make their
defns match the updated spec.
Backward compatibility is provided by defining __BUS_SPACE_COMPAT_OLDDEFS,
which is currently defined by default.
1997-08-15 00:45:16 +00:00
2a83a9363a
Add interrupt handler for SuperMac GFX.
...
Tested by Kai-Yew Lum <kaiyewl@engin.umich.edu> back in May.
1997-08-15 00:15:32 +00:00
c7079260e5
More machine support:
...
- Add entries for the LC520, Color Classic, and PB150 to intvid_info[].
- Make the PB150 a Duo-class machine, as it seems to work better this way.
Now that we're doing the latter, it points out something I missed a long
time ago when I added Duo support: CLASSDUO was being ignored in
mac68k_set_io_offsets().
PowerBook 150 changes and bug fix provided by Dave Huang <khym@bga.com>
in PR 3970.
1997-08-14 18:23:20 +00:00
drochner