80214041c7
support WSDISPLAYIO_SVIDEO/WSDISPLAYIO_GVIDEO.
...
lcd on/off
2001-03-09 08:54:18 +00:00
2c4c690f14
Add the BUS_DMA_STREAMING flag.
2001-03-07 22:42:16 +00:00
1a533a81d6
add sigmarion parameter.
2001-03-06 03:14:39 +00:00
c074920294
Add PocketPostPet entry.
...
The version number is 1.17.2 2001.03.04.
2001-03-04 05:38:19 +00:00
0cb5085286
BUGFIX: These string data, 'MEMORI- KA-DO...' didn't have any terminater.
2001-03-04 05:11:31 +00:00
e18e70f67e
Add some diagnostic code.
2001-03-04 05:08:29 +00:00
f199529e4b
add MC/R430(copy of MC/R530)
2001-03-02 09:14:36 +00:00
b8e5bc569c
* add WSDISPLAYIO_PARAM_BACKLIGHT, WSDISPLAYIO_PARAM_CONTRAST,
...
WSDISPLAYIO_PARAM_BRIGHTNESS supports.
2001-02-27 08:54:17 +00:00
269197a956
add vrc4172pwm for MC/R530A, MC-R700.
2001-02-27 08:51:06 +00:00
66261e817a
* update copyright year.
...
* some machines(MC-R700 etc) have pre-vrc4172 asic.
they don's work as vrc4172 specification, so skip some probe sequence.
- add platid related parameter.
- add VRC4172PWM_BROKEN_PROBE code.
* add MC-R700,700A parameters (tested on MC-R700).
* add contrast parameters.(but no one use yet).
* turn some message in probing to VPRINTF().
* enlarge VRC2_PWM_N_BRIGHTNESS.
2001-02-27 08:48:38 +00:00
42127a3ffd
register vrc4172pwm driver for MC/R530 etc..
2001-02-26 09:34:22 +00:00
fb03c1ad33
DPRINTF/VPRINTF change.
2001-02-26 09:33:03 +00:00
074b36937c
Make it compilable, syncing with the relocation of the platid stuff.
2001-02-25 12:58:36 +00:00
b81de58f77
I forgot to move Makefile.
2001-02-23 14:08:54 +00:00
659f65e0ee
hpc common files are moved to dev/hpc.
2001-02-22 18:37:54 +00:00
8b060aaf64
hpc* common disksubr.c
2001-02-21 16:34:00 +00:00
ed219529f5
* vrc4172pwm_light(): workaround when brightness is max.
...
if light turn off, brightness must be minimum.
* more DPRINTF().
2001-02-16 12:31:46 +00:00
6602ad15b5
* show framebuffer address in boot time.
2001-02-15 09:17:18 +00:00
bcece69eb6
* add MC/R430/530/530A parameters in vrc4172pwm_platid_param_table.
...
* fix typo in cf_loc access.
* add some DPRINTF()s.
* fix default value if no params in vrc4172pwm_platid_param_table.
2001-02-15 03:20:10 +00:00
f19685fa10
I forgot to initialize bicons for hpcmips.
2001-02-09 20:42:27 +00:00
68b5de4251
sync with bicons change.
2001-02-09 19:47:28 +00:00
2cb604a22d
sync with platid_gen change.
2001-02-05 17:39:45 +00:00
596e28b8c2
Marge hpcmips/conf/platid.def and hpcsh/conf/platid.def
...
into hpc/conf/platid.def.
2001-02-04 05:19:14 +00:00
dcdef16dcd
Copyright year.
2001-02-02 08:31:04 +00:00
67c95e9ab7
remove old platid_gen
2001-01-29 04:23:01 +00:00
584cfa7669
Switch to MI md_root.c.
2001-01-28 03:09:40 +00:00
6be22c0c6f
hpcmips hpcsh common files are moved to arch/hpc.
2001-01-28 02:52:15 +00:00
8211e0e08b
* support more than 16 ids.
...
* check the event ids are in the table.
2001-01-26 03:44:33 +00:00
18ae54300c
* renumber config_hook event type.
...
* change event id of old event type(POWERCONTROL,BUTTONEVRNT)
to same as event id of new event type(EVENT,SET,GET).
2001-01-26 03:42:30 +00:00
3689556739
* fix typo.
...
* change PWR_* handling to PWR_SOFT* handling, if these routines need to sleep.
2001-01-24 09:34:26 +00:00
2e9c446398
* dopowerhooks(PWR_SOFTSUSPEND) in apm_suspend().
...
* dopowerhooks(PWR_SOFTSTANDBY) in apm_standby().
* dopowerhooks(PWR_SOFTRESUME) in apm_resume().
* dopowerhooks(PWR_RESUME), dopowerhooks(PWR_STANDBY),
dopowerhooks(PWR_SUSPEND) run in splhigh() state.
These changes sync with arch/i386/i386/apm.c.
2001-01-24 09:29:25 +00:00
fbf168d909
delete unneed debug message.
2001-01-24 03:52:16 +00:00
a164b74b53
revert one of 1.34 change.
...
> * emul/mapping infomation turn to per screen.
(my misunderstanding)
currently per device.
2001-01-24 03:50:20 +00:00
4af7f46d47
* support hpcfb_show_screens()'s cb and cbarg arguments. (HPCFB_MULTI)
...
* emul/mapping infomation turn to per screen.
* rename hpcfb_check_scroll() to hpcfb_check_update(). (HPCFB_JUMP)
* rename hpcfb_scroll_update() to hpcfb_update(). (HPCFB_JUMP)
* update experimental HPCFB_JUMP codes. (but not yet fix yet)
2001-01-24 01:38:53 +00:00
0e59b8d2ec
add 4bpp support (sync with mq200 rev1.6 -> 1.7)
2001-01-23 08:51:48 +00:00
8b24036797
Require the machine-dependant DDB commands to be in db_machine_command_table[]
...
and link it directly to db_command_table[] so that it's not necessary
to do this at runtime. Make db_machine_command_table[] const on all ports.
g/c now unneded stuff, like db_machine_commands_install(), db_machine_init()
Patch written by enami.
2001-01-22 13:56:55 +00:00
9ef14b26c7
- sync with i386.
...
- this change fixes bogus ESRCH error bug in writedisklabel().
2001-01-22 12:37:14 +00:00
7a78296f1c
Add items for 4bit/pixel frame buffer format.
...
Fix frame buffer information of Compaq Aero 1530.
The version of binaries get 1.17.0 2001.01.07.
2001-01-21 14:31:37 +00:00
9aa8ab9279
Use rasops with 4bit depth.
2001-01-21 14:00:32 +00:00
82340f7df1
Built-in console driver supports 4bpp frame buffer.
2001-01-21 09:11:28 +00:00
6a31350117
Fix bugs of VR touch panel driver,
...
- status stay in touching while pen don't realy touch.
- cursor often jumps to center of screen.
But it seems that 'stay in touching' still occurs at rare intervals.
2001-01-21 05:00:28 +00:00
24706debd2
Fix indent, which were too deep.
2001-01-20 12:24:22 +00:00
67ea0086c3
fix typos.
2001-01-19 11:42:21 +00:00
e58532a4bf
No-op commit to force update to a non-"-kk" revision.
2001-01-18 17:47:58 +00:00
6b177fb05c
- reduce GP size (20 -> 18).
2001-01-17 10:35:08 +00:00
c7f1462f3e
Add machdep file for procfs. Currently only used for linux-style
...
/proc/cpuinfo (only active when procfs is mounted with -o linux).
For ports other than the i386 this currently produces an empty
string.
2001-01-17 00:07:18 +00:00
46130fb7e5
Add uyap.
2001-01-16 03:38:22 +00:00
d74e432ed3
Make softclock a generic soft interrupt of the API is available,
...
adding the requisite void * argument to softclock().
2001-01-15 20:19:50 +00:00
c1821150bb
change MINYEAR to 2001.
2001-01-15 15:36:38 +00:00
a261276f16
The i4b raw b-channel devices actually do have an ioctl routine,
...
so better add this to the cdevsw entry.
Noted by Bruno Achauer.
2001-01-14 11:17:28 +00:00
d85a75f583
Make sure everybody has an splvm() and equate it with splimp() (splimp()
...
is the historical name for this interrupt level, and the historical name
is going to go away in the near future).
2001-01-14 02:00:37 +00:00
86035aa9c0
dummy WSKBDIO_SETLEDS WSKBDIO_GETLEDS for wsconsctl(8)
2001-01-10 08:43:13 +00:00
5d0c67c603
When adding isdn devices I forgot to check chrtoblktbl.
...
Fix this know for the affected archs.
2001-01-09 20:51:04 +00:00
f53c899649
Add isdn devices to all archs that seem to support at least one of the
...
necessary busses. Sync comments with reality for archs that already had
the devices.
2001-01-08 21:46:33 +00:00
a0a2fc0688
Implement WSMOUSEIO_SRES to control A/D port scan interval.
2001-01-08 09:50:08 +00:00
e2173eff07
Add some definitions.
2001-01-07 07:29:33 +00:00
8ce2076cf5
Fix a typo in debug printf.
2001-01-06 06:01:59 +00:00
5d91708fb9
Generating workspace and project files for eMbedded Visual Tools 3.0.
2001-01-05 15:00:56 +00:00
37682e5488
- print debug message for WSDISPLAYIO_GETPARAM/WSDISPLAYIO_SETPARAM
...
when boot verbose mode.
for debuging LCD control and/or keyboard cmds.
2001-01-05 09:09:48 +00:00
78242b5fd8
- fix WSDISPLAYIO_MODE_EMUL mode redrawing.
...
- avoid null pointer dereference.
- clean up hpcfb_show_screen().
2001-01-05 09:04:55 +00:00
c381bbbf74
add missing evtype.
2001-01-04 07:55:15 +00:00
58b63998c2
handle pointer type event message and scaler type event message
...
for CONFIG_HOOK_PMEVENT_*.
2001-01-04 07:43:37 +00:00
46921fecee
Avoid null pointer dereference. dc_sc may be null on early stage.
2001-01-04 06:07:43 +00:00
d403e873db
Delete types.h and int_types.h in stand/include/mips and
...
use types.h and int_types.h with __COMPILER_INT64__ in kernel source.
The version of the binaries get 1.16.4.
2001-01-04 06:01:41 +00:00
9d298fafdb
adapt resent config_hook.h
2001-01-04 05:20:37 +00:00
9eb0981033
re-define CONFIG_HOOK NICKNAME.
...
add some macros.
2001-01-04 05:16:26 +00:00
ce0d1ad2fe
- don't ignore DEFCOPTS (Makefile.mips).
...
- DEFCOPTS of hpcmips is "-Os -mmemcpy" (std.hpcmips).
2001-01-04 05:13:30 +00:00
3131dc2c04
make compilable.
2001-01-04 05:01:59 +00:00
62f0a92d52
Avoid null pointer dereference. dc_sc may be null on early stage.
2001-01-04 03:03:04 +00:00
596f0820de
Set HPCFB_DC_CURRENT bit in hpcfb_init() so that boot -d works.
2001-01-04 01:35:21 +00:00
f89afd86e1
re-disable experimental HPCFB_MULTI codes....
2001-01-01 01:42:03 +00:00
6592f8f942
notify console polling mode or not to lower level video driver.
...
turn polling mode when console are polling mode.
disable redrawing when not EMUL mode.
2000-12-30 01:55:24 +00:00
2a6abdcdd6
No reason for this to be checked in any more.
2000-12-29 21:48:32 +00:00
15deccd2a8
Add ray at pcmcia.
2000-12-29 21:47:52 +00:00
fdbe4057ec
- use struct platid_date instead of struct vrc4172pwm_platid_param.
...
- delete struct vrc4172pwm_platid_param.
XXX: vrc4172pwm driver currenty not functional yet.
2000-12-29 15:54:17 +00:00
b8bfd0cc52
* vrc4172pwm driver
...
- add missing functions
- make compilabe.
2000-12-29 11:44:44 +00:00
1ed5e58cb7
* implimant CONFIG_HOOK_PMEVENT_BATTERY&CONFIG_HOOK_PMEVENT_AC
...
based apm state transition.
- change CONFIG_HOOK_PMEVENT_BATTERY message.
XXX: currentry none send these events.
2000-12-29 08:12:08 +00:00
e527c3f384
add platid_search() for search platid related data from tables.
...
add platid_search() test program in platid_test.c. it's sample.
2000-12-28 07:10:14 +00:00
6276ccbc58
- rewrite codes using new CONFIG_HOOK_SET.
2000-12-27 12:22:07 +00:00
4b9ae225e0
-rewite codes by using new CONFIG_HOOK_SET and CONFIG_HOOK_EVENT.
2000-12-27 12:10:05 +00:00
dc6a141444
- rewite codes by using new CONFIG_HOOK_SET and CONFIG_HOOK_EVENT.
2000-12-27 12:08:03 +00:00
22b3467f71
- merge CONFIG_HOOK_OUT and CONFIG_HOOK_SET and CONFIG_HOOK_POWERCONTROL
...
to CONFIG_HOOK_SET.
- merge CONFIG_HOOK_GET and CONFIG_HOOK_GETPOWER to CONFIG_HOOK_GET.
- merge CONFIG_HOOK_EVENT and CONFIG_HOOK_BUTTONEVENT to CONFIG_HOOK_ENENT.
- new CONFIG_HOOK_EVENT and CONFIG_HOOK_GET and CONFIG_HOOK_SET always have
msg argument as pointer.
- new CONFIG_HOOK_EVENT and CONFIG_HOOK_GET and CONFIG_HOOK_SET use
same event ids.
- CONFIG_HOOK_POWERCONTROL and CONFIG_HOOK_BUTTONEVENT still exist.
i shall rewite codes by using new CONFIG_HOOK_SET and CONFIG_HOOK_EVENT.
2000-12-27 12:04:02 +00:00
0ebc2f12c2
fix typo.
2000-12-27 07:52:00 +00:00
e05cd448e3
make compilable for HPCFB_JUMP codes.
2000-12-25 10:27:28 +00:00
45b32e79e8
* add iodone&font entry in struct hpcfb_accessops.
...
* update HPCFB_JUMP codes.
* change tvram initialization out of hpcfb_init().
* use dc_fbaddr for switching screen (for HPCFB_MULTI codes).
2000-12-25 10:09:31 +00:00
6242a87506
Fix text address.
2000-12-23 07:40:51 +00:00
b5c2090ab0
fix MC/R530's COM0 power GPIO port number.
2000-12-22 08:43:56 +00:00
496cf20c43
* update HPCFB_MULTI codes
...
- check malloc() return value.
- disable multi screen feature when console is serial.
XXXX: bacause hpcfb multiscreen feature buggy in serial console.
2000-12-22 08:37:17 +00:00
bd50a7eb6a
- re-disable HPCFB_MULTI which enabled by my mistake.
...
- fix hpcfb_show_screen()'s cursor drawing when HPCFB_MULTI is enabled.
2000-12-21 03:30:36 +00:00
b3192db26e
fix sc->sc_fbconf.hf_offset calculation.
2000-12-21 03:27:15 +00:00
1cf16cd23f
fix some HPCFB_MULTI related bugs.
...
- confusing some screens.
- save/resume problem
(but HPCFB_MULTI is not stabe yet)
2000-12-20 09:35:40 +00:00
9eb6b660b6
fix ICU address typos.
2000-12-20 08:05:09 +00:00
45f1bffb11
fix bug hpcfb_redraw()'s argument all=1.
2000-12-20 08:04:27 +00:00
f048d7e84b
Start using the common mips/conf/Makefile.mips
2000-12-20 04:12:42 +00:00
3ea126c565
Add Aironet.
2000-12-20 03:23:55 +00:00
c71f40d166
Add pseudo-device vlan
2000-12-19 10:42:02 +00:00
cacec11253
delete obsolete comment
2000-12-17 15:52:39 +00:00
595779fbdc
delete unused HPCFB_BSTORE codes.
2000-12-12 22:41:02 +00:00
1021bf4bf1
Change hf_baseaddr usage. Now it potins frame buffer start address instead
...
of hf_baseadd + hf_offset. You should use hf_baseaddr only in kernel and
you should use hf_offset only with mmap system call from userland.
2000-12-03 13:43:40 +00:00
e7c346ccba
- CRT control exists only in GC01R.
...
- add some symbols.
- fix some typo.
2000-12-03 13:24:33 +00:00
94e15f37c8
Cancel previous change and revert to revision 1.35.
...
You can't pmap_steal_memory to allocate proc0 bacase physical memory
detection calls badaddr which needs proc0.
2000-12-03 12:57:37 +00:00
e678d47b5e
Add #UVMHIST line (commented out).
2000-12-03 12:29:28 +00:00
825cb46de5
Revert back to a machinearch (really cputype) of mips. Put ENDIAN back.
2000-12-03 07:05:21 +00:00
0f6c05e8d7
- polling battery voltage value from A/D port.
...
currently polling only.
if verbose mode, kernel print A/D raw value every polling.
2000-12-02 08:35:45 +00:00
a8fdbdec1c
Remove unused pcbb() macro.
2000-12-01 17:57:43 +00:00
38a44e0d8f
Consistently use pmap_steal_memory() to allocate USPACE.
2000-11-27 05:57:25 +00:00
5692823cae
You can map mq200 registers as well as frame buffer.
...
(This little change has already contains release 1.5 branch by my mistake)
2000-11-26 08:33:43 +00:00
b45e183988
hardware accelarate function parameters turn to dot base.
2000-11-26 06:21:16 +00:00
446d4c8a9f
delete not HPCFB_TVOPTIM codes.
2000-11-24 22:05:13 +00:00
bda86c3118
update experimental HPCFB_JUMP codes.
...
(but not completely yet)
2000-11-24 21:58:06 +00:00
c62d17a551
rationalize the use of b_flags for geteblk() buffers.
...
rather than assigning to the whole field, set or clear individual flags,
which implies that the B_BUSY and B_INVAL flags will remain set.
this allows us to make the assertion in brelse() that B_BUSY is set,
which is the purpose of all this.
2000-11-20 08:24:08 +00:00
eb9736c09a
Add uscanner.
2000-11-14 19:52:04 +00:00
47ee1d1c1f
update vrc4172 pwm unit codes.(but not yet completly)
2000-11-11 10:08:12 +00:00
c8c49f7222
- vrc4172 address map definisions.
...
- vrc4172 gpio/ucy/pcs/pmu/pwm register definitions.
- vrc4172 pwm driver (not yet completely)
2000-11-11 04:42:08 +00:00
c98778939f
Fix tty initialization. From Arne H Juul <arnej@fast.no>.
2000-11-08 23:21:38 +00:00
5d8e9b343a
Adapt to the new line discipline scheme.
2000-11-02 00:35:04 +00:00
b674d1f521
when apm version is not 1.0,
...
use APM_BATT_FLAG_XXX type value instead of APM_BATT_XXX type value.
2000-10-27 08:19:37 +00:00
e13d487465
- A/D converter port macro: PIUAB(n)
2000-10-27 08:13:54 +00:00
cbebb75a68
- add VPRINTF().
...
- show pwctl giu bit for verbose.
2000-10-27 08:12:18 +00:00
5cf5562de3
probe message use dv_xname.
2000-10-27 08:10:32 +00:00
a15e59c0eb
enlarge ITE8181_LCD_ON_SELF_DELAY.
2000-10-27 08:09:15 +00:00
720875ffea
correct comment.
2000-10-27 08:08:08 +00:00
786287aac1
- add new event type: CONFIG_HOOK_SET/GET.
...
- add some new id in CONFIG_HOOK_PMEVENT.
2000-10-27 08:04:49 +00:00
b394074d8c
- change constant to static variable for
...
ite8181 access delay parameter after lcd power on.
- ITE8181_WINCE_CMAP.
use presetting cmap by pbsdboot.exe(temporally)
2000-10-23 09:03:31 +00:00
b84e48b8bd
forgot to set HPCFB_ACCESS_REVERSE.
2000-10-22 12:49:27 +00:00
30373f3eb1
reorder color map adequately.
2000-10-22 12:44:16 +00:00
fc9212e594
new I/O modules framework for TX based system.
2000-10-22 10:42:31 +00:00
c3ceefe48c
reverse color support.
2000-10-22 10:33:01 +00:00
a9869a4ed5
fix comment. s/DECstation/hpcmips/
2000-10-22 09:38:23 +00:00
a2c5be7787
Add 'LIBSA_RENAME_PRINTF' in *.config and rebuild related files.
...
The version of the binaries get 1.16.3.
2000-10-21 13:51:01 +00:00
5e9e3fbf13
Add menu entries for CASSIOPEIA 'E-65' and 'for DoCoMo'
...
The version gets 1.16.2.
2000-10-21 09:03:57 +00:00
64e4d7108e
Add platform IDs, Cassiopeia 'E-65' and 'for DoCoMo'.
2000-10-21 07:30:34 +00:00
9154a8ec27
BUGFIX: PCKBD_LAYOUT had not been effective.
2000-10-21 07:27:41 +00:00
0b805455eb
Swap reft and light key.
2000-10-19 01:08:15 +00:00
d9781d7eb9
add new keyword "initvalue" on pwctl device.
...
if "initvalue 0", set the port initialy "off".
if "initvalue 1", set the port initialy "on".
otherwise keep initial value.
2000-10-17 11:37:20 +00:00
59c8220584
DEBUG_FIND_COMPORT code. (by ngc@ff.iij4u.or.jp)
2000-10-16 03:32:44 +00:00
59706f1322
clean up and consistency for CP0 Count, Compare, Wired, and Config
...
access function names and prototypes.
2000-10-05 02:36:44 +00:00
478ab76ca3
experimental power management support for TX3912/TX3922 based model.
2000-10-04 13:53:54 +00:00
832204750a
fix mistake of sigmarion cmdmap.
2000-10-04 03:31:14 +00:00
af1dcf13da
flash led when intrrupt.
2000-10-03 03:16:16 +00:00
c419b94c00
vr41xx LED unit driver.
2000-10-03 03:13:04 +00:00
ca7374c959
add POWERCONTROL_LED.
...
add PMEVENT_AC, PMEVENT_BATTERY.
2000-10-03 03:08:33 +00:00
ee8000c4ad
check NBIVIDEO.
2000-10-02 04:15:51 +00:00
3c83f44fa3
experimental ite8181 video driver for hpcfb.
...
- just copy from bivideo.
- erase WindowsCE hardware cursor initialy.
- LCD power management codes exist, but currently disabled.
Because some devices(include ite8181) confuse after LCD power turn on.
WorkPad z50 power unit seem to be very weak
2000-10-02 04:14:59 +00:00
59de160368
- DPRINTF -> VPRINTF for verbose.
...
- don't attach other video driver under hpcfb.
2000-10-02 04:03:06 +00:00
938b01e688
experimental ite8181 video driver for hpcfb.
...
- just copy from bivideo.
- erase WindowsCE hardware cursor initialy.
- LCD power management codes exist, but currently disabled.
Because some devices(include ite8181) confuse after LCD power turn on.
WorkPad z50 power unit seem to be very weak,
2000-10-02 03:57:53 +00:00
a50307118c
add sigmarion cmdmap and use it.
2000-10-02 03:45:10 +00:00
f88fbde7ac
don't reset RTC in tx39clock_set()
2000-10-01 18:12:04 +00:00
ccac45b532
Modify keymaps of MC-R and MC-CS series to add backlight control keycommand.
...
Modify keymap of btnmgr to add backlight control keycommand.
Add backlight control function to bivideo.
2000-10-01 03:45:33 +00:00
154f1e86b1
fix tx39clock_alarm_refill bug.
2000-09-28 16:18:26 +00:00
0ab2301b6b
hot plug support.
2000-09-27 17:32:34 +00:00
e1c01aff60
remove obsolete files.
2000-09-27 13:42:14 +00:00
d3cf7525d3
add 'options VNODE_OP_NOINLINE' to reduce size.
2000-09-27 10:22:22 +00:00
6ec1be8054
apply 'hpckbd' change.
2000-09-27 10:21:23 +00:00
82d4c9df0e
add DoCoMo sigmarion cover button.
2000-09-27 09:32:23 +00:00
b1d64a728d
add DoCoMo sigmarion keymap.
2000-09-27 09:30:47 +00:00
eb2da98d92
#include <sys/reboot.h> would probably suffice for those.
2000-09-25 09:03:32 +00:00
67afa9cfe2
- when PMUINT_BATT or PMUINT_BATTINTR interrupts occured,
...
send CONFIG_HOOK_PMEVENT_SUSPENDREQ event.
2000-09-25 03:51:28 +00:00
1efb55d0b4
- add debug/verbose functions.
2000-09-25 03:47:37 +00:00
5125b04184
- can compile these files.
...
#include <sys/boot_flag.h>
2000-09-25 01:56:56 +00:00
b1f94e26ab
don't specify number of ptys if >= 16 (current default initial number)
...
pty comments: normalize and g/c what is no longer relevant
2000-09-24 15:59:26 +00:00
49c105ffdb
add new macro BOOT_FLAG() (defined in <sys/boot_flag.h>) - this
...
maps standard boot flags to corresponding RB_* values
use BOOT_FLAG() in port's MD code as appropriate
as discussed on tech-kern, add new boot flags -v, -q for booting
verbosely or quietly, and corresponding AB_VERBOSE/AB_QUIET
boot flags; also add FreeBSD-compatible bootverbose macro and
NetBSD-specific bootquiet macro
for hpcmips, use new bootverbose instead of it's own hpcmips_verbose
Tested on i386, and to limited extend (compile of affected files) also for
mvme68k, hp300, luna68k, sun3.
2000-09-24 12:32:31 +00:00
e9a2baa2ff
Grab a major # for USB scanners.
2000-09-23 04:30:08 +00:00
680c6d9cd0
Recompile pbsdboot for DoCoMo Sigmarion and NEC MC/R330.
...
The version number gets 1.16.1 2000.09.21.
2000-09-21 14:24:40 +00:00
454e19c166
skbd -> hpckbd. hpckbd supports vrkiu as well as m38813c and tc5165.
2000-09-21 14:17:29 +00:00
2ea1ab1fbb
add MC/R330.
...
add sigmarion.
2000-09-21 03:19:57 +00:00
109c7bc1e5
regen.
2000-09-21 03:18:04 +00:00
d5a2a40be6
Add NEC MC/R330.
...
Add DoCoMo sigmarion.
2000-09-21 03:16:10 +00:00
72a24b4eae
Add an align argument to uvm_map() and some callers of that
...
routine. Works similarly fto pmap_prefer(), but allows callers
to specify a minimum power-of-two alignment of the region.
How we ever got along without this for so long is beyond me.
2000-09-13 15:00:15 +00:00
aa96730805
bzero allocated structutre initialy.
2000-09-12 08:25:44 +00:00
83517998af
fix typo in boot message.
2000-09-12 02:12:20 +00:00
5bb7aeddee
- delete some unused codes (but some experimental code is not deleted)
...
- add experimental HPCFB_JUMP code but it is not enabled.
2000-09-11 13:44:49 +00:00
96f8d01088
add SPEAKER pwctl device for several machines.
2000-09-10 15:48:10 +00:00
20cc493f48
add CONFIH_HOOK_POWERCONTROL_SPEAKER.
2000-09-10 15:45:47 +00:00
988e123a02
- not handle CONFIG_HOOK_POWERCONTROL events because the events
...
handled by lower lcd/lcdlight control device.
2000-09-10 15:33:48 +00:00
39556606fe
handle CONFIG_HOOK_POWERCONTROL events
...
- PWR_SUSPEND: save giu bits values and turn "off" the values.
- PWR_RESUME: restore giu bits values.
2000-09-10 15:30:32 +00:00
ed9f910cc8
Introduce WSDISPLAY_NULLSCREEN to allow low level device to detach control
...
process. Hpcmips frame buffer driver(hpcfb) call wsdisplay_switch with
WSDISPLAY_NULLSCREEN to notify user process of suspend/resume event.
2000-09-10 09:39:57 +00:00
3369a78b96
Create dummy main window to resolve the problem that it can't setup color
...
palette correctly.
version no gets '1.16.00 2000.09.10'
2000-09-10 08:29:53 +00:00
1f41d9a644
Previous revision contains some Japanese chars by mistake.
...
The bootloader has been improved by Kazuma Arino.
- dialog style main window
- support to read compressed kernel image
- automatic boot with timer
- human readable configrarion file
version no gets '1.15.00 2000.08.29'
2000-09-10 08:02:13 +00:00
9a5210c76d
- adapt config_hook(CONFIG_HOOK_PMEVENT,..)
...
save cmu clock mask register and disable all clock when PWR_SUSPEND event.
restore saved cmu clock mask register when PWR_RESUME event.
2000-09-07 03:11:11 +00:00
212b3fa9d8
The bootloader has been improved by Kazuma Arino.
...
- dialog style main window
- support to read compressed kernel image
- automatic boot with timer
- human readable configrarion file
version no gets '1.15.00 2000.08.29'
2000-08-29 15:10:14 +00:00
2a9cfc2e99
add pwctl PWCTL_LCD, PWCTL_LCDLIGHT for NEC_MCR_FORDOCOMO, NEC_MCR_500.
2000-08-27 22:56:31 +00:00
97749b6bb4
don't refer cf_unit.
...
undef __BROKEN_CONFIG_UNIT_USAGE
2000-08-24 11:19:19 +00:00
58e7a6954b
Add spllock(). See spl(9) for details.
2000-08-22 19:46:26 +00:00
23a7f255d4
Make sure we provide splsched() as described in spl(9).
2000-08-21 02:06:31 +00:00
a86d1f4891
Add a lock around the scheduler, and use it as necessary, including
...
in the non-MULTIPROCESSOR case (LOCKDEBUG requires it). Scheduler
lock is held upon entry to mi_switch() and cpu_switch(), and
cpu_switch() releases the lock before returning.
Largely from Bill Sommerfeld, with some minor bug fixes and
machine-dependent code hacking from me.
2000-08-20 21:50:06 +00:00
d5b133164a
- disable warning: add missing argument.
2000-08-18 07:33:14 +00:00
85dda25e94
move "options PULLDOWN_TEST" into sys/sys/mbuf.h (in #ifdef _KERNEL),
...
as it is no wthe default setting for everyone.
the reason we still use the name "PULLDOWN_TEST" while it is now default:
kame code sharing.
2000-08-13 01:31:15 +00:00
fc28236a58
Tweak printf format to compile with printf changes.
2000-08-10 08:27:54 +00:00
29550fc608
kprintf -> printf format attribute
2000-08-09 16:34:25 +00:00
bf38a18dfc
Define bus_space_*_stream_N functions as their non-stream counterparts.
2000-08-09 02:12:50 +00:00
04e4950cbb
detect and eliminate phantom keys.
2000-08-05 05:55:27 +00:00
537da4726d
Refresh screen when the system resume.
2000-07-30 11:16:54 +00:00
b5e3ec56a8
Remove src/sys/dev/apm/*. (They've gone to arch/hpcmips/dev/apm.)
2000-07-30 04:41:15 +00:00
bb1a798cbe
Move from sys/dev/apm. And rename apm -> apmdev.
2000-07-30 04:29:22 +00:00
e25636b5da
g/c RB_DFLTROOT
...
I've tried hard to find also various usage() messages and remove the
appropriate flag from there as well, hopefully all occurences are covered.
2000-07-29 20:06:27 +00:00
4a353b5330
Moving to a default of 64 PTYs.
2000-07-27 17:53:35 +00:00
b63ed164a1
convert PRID handling to use macros on an int, not bit-fields.
...
there's no reason to use bit-fields, and they just complexity to
the header.
2000-07-27 17:29:05 +00:00
05587c68ae
Correct typo in comment.
2000-07-25 00:11:36 +00:00
733c04149a
Experimental MQ200 video driver. It's just copy of bivideo plus power
...
management routine.
2000-07-22 08:53:33 +00:00
sato