f636538446
NULL != 0
2000-05-19 04:34:39 +00:00
4bd0bb352b
this file has not been used for a long time.
2000-05-19 01:09:21 +00:00
5e33ffef22
Initialize hardware for mouse mode at open time.
...
This fixes MB2 and MB3 on the 2nd mouse port (the first is initialized by
the Amiga ROM at boot time).
2000-05-18 19:58:30 +00:00
8050d5687d
Restructure the ms(4) autoconfiguration code to attach as a single device
...
instance and select a mouse port via the least significant bit of its
device minor number. Fixes abuse of cf_unit in this driver.
2000-05-18 15:39:22 +00:00
74e4bb664f
Wrong logic. Pointed out by Yasufumi.
2000-05-18 15:24:30 +00:00
7caaf84b68
bus_dmamem_alloc: ensure alignment is always at least the page size.
2000-05-18 10:10:55 +00:00
9bf1dc1e62
fix comments.
2000-05-18 04:20:41 +00:00
f7b0b612b4
Add PCMCIA.
2000-05-18 04:03:30 +00:00
8bc2515577
fix CONFIG_HOOK_BUTTONEVENT_CANCEL keycode.
2000-05-18 03:27:22 +00:00
135a70e5a6
Make cache printing a little more consistent.
2000-05-17 23:35:44 +00:00
2d153651e5
Preliminary support for the VS4000/90 SGMAP. Needed for SCSI. Does not
...
quite work right yet.
2000-05-17 21:22:18 +00:00
6fb4d43f97
Sync closer to GENERIC.
2000-05-17 21:19:49 +00:00
56512515f8
Add Cyclades-Z serial.
2000-05-17 18:08:50 +00:00
640a49f093
Add Cyclades-Z serial adapter at cdev minor 73.
2000-05-17 18:08:03 +00:00
817862e208
vmapbuf: should not map the kernel address uncacheable.
2000-05-17 14:37:59 +00:00
740759113f
mips5200_FlushCache(): flush L2 cache too.
2000-05-17 12:44:48 +00:00
0cd44feb0e
fix if/ifdef mistake
2000-05-17 10:28:14 +00:00
20bc66f592
- add some psycho interrupt debugging stuff (#if 0'ed out)
...
- fix arguments passed in psycho_dmamap_load_raw()'s declaration, and
what it passes to it's parent bus.
2000-05-17 10:17:01 +00:00
eee5e33e8a
- in iommu_remove(), move len adjustment outside if statement, leaving
...
just one copy of this.
- remove duplicate setting of sgsize in iommu_dvmamap_load().
- fix DIAGNOSTIC check in iommu_dvmamap_load_raw() to panic() in unexpected
conditions only (not normal ones), and also add an extra case.
2000-05-17 09:53:53 +00:00
b444da72bd
Skip fixup phase when system BIOS setting were perfect.
...
don't write 0 to command register. (it is harmful).
2000-05-17 09:50:34 +00:00
53fa9da4df
move zs_attach() to after the setting of the console device, to avoid
...
having cn_dev being 0 and thus cnopen() being called recursively. this
fixes this problem for zs-based console's only.
2000-05-17 09:28:22 +00:00
651712a140
add a note about US IIi and PCI_INTERRUPT_LINE register
2000-05-17 09:25:58 +00:00
6dad37e26a
expand a comment slightly.
2000-05-17 09:25:27 +00:00
f2a19f58b5
fix || vs. && bug, and clean up some cruft.
2000-05-17 09:16:44 +00:00
0eeab9735f
fix another warning.
2000-05-17 09:12:10 +00:00
5eacd822a1
delete undefined 'NEC_MCR_4XX'.
2000-05-17 08:38:25 +00:00
3b90b5c5c4
Add support for bus_dma_load_raw() so the le driver will work again.
2000-05-17 02:31:12 +00:00
463931b3ba
Nuke dk_establish() from orbit except from those ports which still use
...
it to determine the boot device: mvme68k, pc532, macppc, ofppc. Those
platforms should be changed to use device_register(). In the mean time,
those ports defined __BROKEN_DK_ESTABLISH.
2000-05-16 05:45:44 +00:00
aa0007b5a5
In case of db_onpanic=0, still drop to ddb if the trap was from within
...
ddb.
i.e. "db> x/s 0x14" should return you to ddb when it faults, regardless
of the state of db_onpanic.
2000-05-15 20:16:48 +00:00
66ecdc15d3
Remove unused PSL_USERCLR defines for processor status register.
2000-05-15 08:36:32 +00:00
8a71a7a50f
Backout the previous change which was done mistakenly.
2000-05-15 06:45:44 +00:00
c7c815f46b
Remove #include <machine/psl.h> which is not used.
2000-05-15 06:39:14 +00:00
cb3a247145
Use bsd.hostprog.mk to allow ELF target on a.out host.
2000-05-15 05:02:29 +00:00
ab17e681e7
NEC MC-CS LIGHT button.
...
NEC MC-R430 COM0 power.
CASIO E55 COM0 power.
CASIO E55 LIGHT button.
2000-05-15 01:40:44 +00:00
950e36ed1f
Don't panic on a segfault, but drop into the debugger if it's there.
...
Not that this helps much, since we immediately panic in cpu_coredump instead.
2000-05-14 22:50:01 +00:00
6943d5dd19
defopt FPSP.
2000-05-14 14:13:53 +00:00
879e4dbe7c
defopt FPSP.
2000-05-14 14:13:50 +00:00
53e627cd0b
MD parts of uvm_pageidlezero.
2000-05-14 14:10:09 +00:00
42ccab0d49
Add fp emulation for sqrt_s and sqrt_d instructions
...
from Jeff Smith <jeffs@geocast.com>. These are needed to support
-mips2 compilation. With this change, on a QED 5231 we now pass the
paranoia tests, and are successfully using userlands built with -mips2.
2000-05-14 06:19:32 +00:00
2dc49a4780
Comment out XSERVER and XSERVER_DDB and move them to the pccons-specific
...
section. They are not used with wscons.
2000-05-14 04:36:09 +00:00
f26b6caddd
clear CPU count register interrupt properly (VR4100).
2000-05-14 03:16:11 +00:00
f9b83f27e9
change Telios keyboard map: KS_KP_Enter -> KS_Return
2000-05-13 20:34:13 +00:00
6572f303f4
remove now redundant comment regarding IBM_L40 define
2000-05-13 19:58:41 +00:00
950749ab6f
add special bootblocks for IBM PS/2 - those machines need different gate A20
...
addressing
2000-05-13 19:58:01 +00:00
187860f8fb
Fix problem from 1.27, and more long-standing in the commented-out
...
-DSUPPORT_SERIAL options:
Only set -DSUPPORT_SERIAL=CONSDEV_PC for "biosboot" and "biosboot_resetvideo",
but not for biosboot_com0.
2000-05-13 19:03:19 +00:00
9f75c038c1
Add vmapbuf/vunmapbuf
2000-05-13 17:57:14 +00:00
4b7597ffe5
Handle more cases of existing mappings in pmap_enter
2000-05-13 17:56:32 +00:00
924b1948b4
Replace (non-working) ncr with new siop.
2000-05-13 14:54:51 +00:00
e65735cc74
More informative stack backtrace. Prints whole stack frames\!
2000-05-13 14:43:11 +00:00
9d61165c26
Oops. Swedish is KB_SV.
2000-05-13 14:40:10 +00:00
thorpej