3995590109
Use `offsetof()'.
1998-02-04 01:19:23 +00:00
749d6cf61d
Account for changed vme_bus_probe() args.
...
Fix vme_ie_write24() to use bus_space_write_2() in stead of poking
directly into the bus handle.
1998-02-04 00:59:02 +00:00
62f18b7ff0
Use vme_bus_probe() callback for device detection.
...
Use correct VME modifier (A16+D32 instead of A32).
1998-02-04 00:55:52 +00:00
47afb35008
Use vme_bus_probe() callback for device detection.
1998-02-04 00:54:27 +00:00
c7a01456a0
Add a callback function to vme_bus_probe(), for device-specific probes
...
using mapped device space.
1998-02-04 00:50:44 +00:00
296d96f42c
Add dm_mapsize to bus_dmamap_t and rename BUS_DMAMEM_NOSYNC to
...
BUS_DMA_COHERENT.
1998-02-04 00:38:50 +00:00
c1e336fc0b
Erase a spurious structure definition.
1998-02-04 00:38:34 +00:00
a7c5c1ef3c
Add dm_mapsize to bus_dmamap_t and rename BUS_DMAMEM_NOSYNC to
...
BUS_DMA_COHERENT.
1998-02-04 00:32:55 +00:00
819d730e25
s/of_nodename/of_packagename/. Eventually, we'll probably want something
...
similar for instances.
1998-02-03 16:58:25 +00:00
77b3a5be15
Put a debugging printf inside #ifdef IYDEBUG ... #endif.
1998-02-03 16:22:01 +00:00
7052e9949b
Change the data access busification functions to
...
the "stream" busification functions.
In the architecture as the BeBox(CPU is big endian, have ISA bus),
These methods would be used where "raw" data needs to {read,write,set}
unchanged.
Add #ifndef __BUS_SPACE_NEED_STREAM_METHODS (define that on NetBSD/bebox),
if not define __BUS_SPACE_NEED_STREAM_METHODS,
define "stream" busification functions to normal busification functions.
1998-02-03 04:26:45 +00:00
9c46cdbef5
in ofbattach(), don't both doing an ofbprint() by hand if the root node.
...
The old ofbprint() wasn't particularly good (it forced the root node
to have a 'name' property, which apparently violates the OFW spec), and
the new one (though it normally prints more useful information) has
nothing useful to say about the root node. It's not clear to me that
'ofroot' should exist at all.
1998-02-03 00:43:46 +00:00
9bffcfef75
change #ifdefs keying on "alpha" to key on "__NO_SOFT_SERIAL_INTERRUPT"
...
instead, and define that on NetBSD/alpha and NetBSD/arm32.
1998-02-02 23:01:02 +00:00
c2f42b2213
Implement a flag to indicate that the driver attached correctly.
...
This is useful in the case where an attachment's probe routine
verifies that there is indeed hardware present but something goes
"wrong" in the attach causing the device to be unusable. (Without
keeping track of this, in that case incorrect ports could be
accessed or uninitted pointers could be deferenced on open or at
other times.)
1998-02-02 22:54:55 +00:00
ac4b4ec31d
make ofbprint() use of_nodename(). cleanup.
1998-02-02 22:00:07 +00:00
5169537359
add of_nodename(), a function to stuff the last component of a node's
...
name into a caller-provided buffer (helpful for generating
autoconfiguration output). Also, other minor cleanup.
1998-02-02 21:56:16 +00:00
c9249eced0
add a prototype for of_nodename(), a function to stuff the last
...
component of a node's name into a caller-provided buffer (helpful
for generating autoconfiguration output).
1998-02-02 21:55:23 +00:00
69d33afe72
Prototype OF_getproplen().
1998-02-02 21:00:13 +00:00
b01ada14d9
fix up the power management code to dtrt with the 3c562A mfc card (and
...
hopefully the other variants)
1998-02-01 23:52:25 +00:00
6b68f8b698
use an array of serial devices, not a cascaded if
...
add power management support
1998-02-01 23:50:52 +00:00
3a3ac64f4f
rewrite mfc intr management not to use unexported spl* functions
...
add mfc iobase/iosize support
add power management support
1998-02-01 23:49:02 +00:00
cdc3013464
whitespace changes for readability
1998-02-01 23:38:44 +00:00
57e56a34bc
add state to struct pcmcia_function for mfc iobase/iosize support
1998-02-01 23:38:06 +00:00
5c17882e45
move pcic_wait_ready from i82365var.h to i82365.c
1998-02-01 23:36:23 +00:00
63f5e2bbc3
move pcic_wait_ready to i82365.c
1998-02-01 23:33:51 +00:00
1d4b77e754
split com_attach_subr into attach stuff and per-open initialization stuff
...
add timeouts to all splserial() while loops so bugs elsewhere don't cause
the com driver to wedge the machine
add power management support
1998-02-01 23:33:01 +00:00
a71698f108
add power management hooks to softc
1998-02-01 23:30:49 +00:00
fa75c2d647
Fix two harmless typographical errors in a comment.
1998-02-01 19:25:44 +00:00
f3ee364e31
* Make sure the `ECB_NEXUS' flag accurately reflects the existence of
...
an initiator/target nexus and thus mark the correct queue (if any) a
command is on.
* If a disconnected command times out, just leave it on the nexus queue
and do nothing (for now). I need yet to decide on the strategy to
follow in this case. Note: we used to move the command to the `ready'
queue and then do nothing, which is worse.
1998-01-31 23:37:51 +00:00
5ba817c967
Don't hardcode the interrupt type; use what the pnp config provided to us.
1998-01-31 21:31:35 +00:00
1caaa1f520
PR/4883: Andreas Wrede: Check for wildcard mem address not io ports.
1998-01-31 11:23:35 +00:00
480445c035
When a PCI bus is attached, print out which bus spaces were enabled
...
by the parent.
1998-01-31 00:37:39 +00:00
d411251c64
Fix for the vibra16x from Lennart Augusts: saying that the dsp4.16 was
...
a SB64 was just a guess. The vibra16x is really a sb16.
1998-01-30 11:55:36 +00:00
605c219597
Add ID for the Vibra16X PnP board (aka CT4170).
1998-01-30 11:42:51 +00:00
cec1781573
Regen.
1998-01-30 02:25:28 +00:00
8b75f90a86
Add entries for the PMAZ-DS and PMAZ-FS (Flamingo Turbochannel Dual SCSI
...
baseboard devices, normal and fast), and the PMAZB-AA and PMAZC-AA
(Turbochannel Dual SCSI option cards, normal and fast).
1998-01-30 02:24:58 +00:00
6f6593a533
Fix initialization and timing problem.
...
As per misc/4902, from Clifford Wright <cliff@snipe444.org>.
1998-01-30 02:02:38 +00:00
78650a8398
Use offsetof() from libkern.h
1998-01-30 01:26:51 +00:00
a7bc6bd92c
In the NE2000 case, if we encounter an unaligned mbuf, copy it to an
...
aligned buffer so that we can do 16-bit PIO to the device without causing
an unaligned access fault.
1998-01-29 00:59:33 +00:00
99139bc35a
Fix for port-alpha/4903- always download f/w unless config flags say
...
no or we have no firmware to download.
1998-01-28 19:09:24 +00:00
9359316f6f
Add support for the 82553[AC] PHY by treating it like an 82555. From
...
Soren S. Jorvang <soren@t.dk>, PR #4840 .
1998-01-28 18:31:37 +00:00
b89119c134
Convert this driver to use the bus_dma interfaces.
1998-01-28 07:26:42 +00:00
5cafda5b3c
Update 2100 F/W to 1.10 level. Also remove some older 2100 f/w versions.
...
This version of the 1.10 f/w is initiator only (not initiator/target).
1998-01-28 06:09:02 +00:00
2538ed1062
Use offsetof() from libkern.h
1998-01-28 02:23:04 +00:00
08af1cdbbc
prototype of_compatible
1998-01-28 00:01:34 +00:00
b4026f2974
clean up comments and includes. add an of_compatible() function
...
which checks for the presence of any of a set of caller-provided
strings in a node's "compatible" property (the _right_ way to
determine driver compatibility).
1998-01-28 00:01:01 +00:00
9e47d44515
Make sure the data after the Ethernet header is aligned. (It's been
...
in the Shark source tree for a while, but Jason's recent commit to
dp8390.c spurred me to check it in here.)
XXX Assumes the device is an ethernet, but then so does other code in
this driver.
1998-01-27 23:55:18 +00:00
cdec42b6a0
Fudge the start of the data pointer of the first mbuf in the chain when
...
reading a packet, ensuring that the data after the Ethernet header will
be aligned. Part of PR #4595 , from Andreas Johansson <ajo@wopr.campus.luth.se>
1998-01-27 23:26:21 +00:00
6f8773dd64
I'm not responsible for this address window splitting hack, but I fix it
...
anyway.
1998-01-27 19:14:18 +00:00
c7c415e733
Regen: add Packet Engines G-NIC gigabit Ethernet.
1998-01-27 01:03:29 +00:00
pk