mark
99973d1aa3
Bug fix from Andrew McMurry for filecore_readdir() missing the end
...
of the directory and reporting some non-existant files.
1998-09-18 04:17:44 +00:00
mark
7482a84e6a
Be less verbose during various data aborts unless DEBUG is defined.
1998-09-18 04:09:57 +00:00
mark
9f474557fe
Allow boot arguments to override the host id on a per instance basis.
1998-09-18 03:23:19 +00:00
cjs
0ad4a32dfb
Add bugs section noting that, with -F, tail can fail to detect a file
...
truncation. Also note that -F option is an extension.
1998-09-18 01:54:13 +00:00
cjs
59a47ce7be
Remove tracking of file size by how many characters were output.
...
This succumbs to a race condition where data are written to the
file while the sleep is occurring. If a stat is done immediately
after, lastsize is updated but the file pointer wasn't pointing at
the end of the file, so the number of bytes between the current
pointer and the end of the file is added to the lastsize when
lastsize already points to the end of the file.
1998-09-18 01:42:54 +00:00
mjacob
8fdc5aee4b
Make changes as required for new return values from dma setup routine
...
for isp. Unable to test in running kernel because they're not buildable today,
but should be okay.
1998-09-18 00:26:11 +00:00
mjacob
6d8a22890e
dma setup now returns CMD_QUEUED or CMD_COMPLETE. Clarify a ternary
...
operation that needed some parentheses.
1998-09-17 23:10:20 +00:00
mjacob
1dac5b5291
Several changes, including some stub fibre target mode stuff. Establish
...
a slightly different fibre startup (print ALPA now too). Change
the way that return values from dma setup is done. Make debug messages
out of some queue overflow situations. Turn PORT LOGGED OUT into
Selection Timeout equivlaent. On isp_restart actions don't blow off
the commands with HBA_BOTCH (XS_DRIVER_STUFFUP) - set them with HBA_BUSRESET
(which is defined as XS_DRIVER_STUFFUP until someone decides whether
the suggested change to the midlayer NetBSD is worthy of inclusion).
1998-09-17 23:05:46 +00:00
mjacob
a0a31568e8
cleanup header to be just NetBSD, roll rev, change QDEPTH to QAVAIL macro
1998-09-17 22:52:54 +00:00
mjacob
0e0010df41
cleanup header to be just NetBSD
1998-09-17 22:52:14 +00:00
mjacob
cb787c768d
add some target mode definitions
1998-09-17 22:51:54 +00:00
mjacob
24717f3c3a
cleanup header to be just NetBSD
1998-09-17 22:50:53 +00:00
drochner
7f72e0eea5
LK201/LK401 support for wscons (only decoding for now).
1998-09-17 20:01:57 +00:00
drochner
af9cabdaaa
Add definition for highest legal LK201 keycode.
1998-09-17 19:59:30 +00:00
drochner
6f1bc2944f
Adapt to keymap table format change.
1998-09-17 18:31:43 +00:00
drochner
ffa2207ec9
wskbd map for LK201/LK401
1998-09-17 18:29:54 +00:00
drochner
ad6d798d6a
Move keyboard map from <dev/wscons/wskbdmap_mfii.h> into a _source_ file.
1998-09-17 18:21:04 +00:00
drochner
1eda36523a
Add option bit which covers the delta between LK201 and LK401.
1998-09-17 18:16:39 +00:00
drochner
fdfd53e5af
Add end mark to list of keymaps.
...
XXX This file will be removed, it is only left until the USB driver
XXX got an own keymap.
1998-09-17 18:14:06 +00:00
drochner
ec9b2072bb
Reorganize the list of keyboard maps: no explicite length counter, use
...
an end mark instead. This allows to keep keymaps separate from the drivers
referring to them.
1998-09-17 18:10:53 +00:00
drochner
1a9e20e98c
Define a new keyboard eveny type "all keys up". This allows to reduce
...
the amount of statekeeping in drivers for LK201-like keyboards, and it
might be useful to resync after resets or overflows.
(reused the unused WSCONS_EVENT_KEY_OTHER event ID)
Implement the necessary decoding bits.
1998-09-17 18:05:43 +00:00
phil
51fbe5aee3
Fix class c netmask.
1998-09-17 16:45:36 +00:00
agc
1159a11534
Document REQ_FILE and MESSAGE_FILE definitions.
1998-09-17 16:04:06 +00:00
agc
247891ee59
Document INSTALL_FILE and DEINSTALL_FILE definitions, to be set to the
...
names of any INSTALL or DEINSTALL scripts, respectively.
Also bring explanation of LIB_DEPENDS up to date.
Document USE_LIBTOOL.
1998-09-17 14:14:17 +00:00
hwr
f781823236
Main is int. From Soren S. Jorvang <soren@t.dk>.
1998-09-17 07:41:11 +00:00
phil
5807dd11b1
Comments added/modified to clarify how txtwalk works.
1998-09-17 05:57:28 +00:00
thorpej
0a25ae0343
Make this build again.
1998-09-17 05:15:11 +00:00
thorpej
b9a131261c
Define the new sigcontext structure.
1998-09-17 04:54:51 +00:00
thorpej
2eb8e8729b
Make the signal code look a bit more like the 32-bit SPARC port's.
1998-09-17 04:52:17 +00:00
thorpej
a7e5b3bcce
For _LP64, sigcontext must contain longs!
1998-09-17 04:51:29 +00:00
thorpej
5e8f492923
SYS_sigreturn -> SYS___sigreturn14.
1998-09-17 04:41:06 +00:00
phil
3330188abd
1.3 has long since come and gone, update some entries, add a couple.
1998-09-17 04:11:54 +00:00
thorpej
dcb541531a
Minor cosmetic change.
1998-09-17 02:33:06 +00:00
thorpej
c006c7c0da
Sync w/ sendsig().
1998-09-17 02:30:02 +00:00
thorpej
e5ea525b9f
Slight brain'o in last.
1998-09-17 02:26:26 +00:00
thorpej
5bc9dafaee
Minor cosmetic change to sendsig().
1998-09-17 02:24:56 +00:00
thorpej
cc485c1a08
Catch up with changes to signal delivery.
1998-09-17 02:01:59 +00:00
thorpej
7083b63277
Back out previous; I'm punting PowerPC to tsubai or sakamoto.
1998-09-16 23:51:27 +00:00
thorpej
ef3f4d39df
Need 103 longs for jmp_buf now (128-bit signal mask, at the front of the
...
jump buffer).
1998-09-16 23:33:18 +00:00
thorpej
3d4e54f11f
Need 87 longs for a jmp_buf now (we use sigcontext, which grew).
1998-09-16 23:15:08 +00:00
thorpej
7b32475079
Define the new sigcontext structure.
1998-09-16 23:14:15 +00:00
thorpej
6385066c76
Need 13 longs for jmp_buf now; 128-bit signal mask.
1998-09-16 23:13:57 +00:00
is
95807e512a
Garbage collect unused 3rd parameter to comprobe1().
1998-09-16 21:30:58 +00:00
pk
59e5588098
Map the per-CPU counter registers into each cpu info area.
1998-09-16 13:39:48 +00:00
pk
49b5114713
Make all cpu info structures accessible through an array `cpus[_MAXNCPUS]'.
1998-09-16 13:36:23 +00:00
mycroft
54bbb69ea1
Word the comments about `async' a bit more strongly.
1998-09-16 09:27:36 +00:00
scottr
7aa4d4483e
Revert the last change: returning COMPLETE is clearly the wrong thing to do
...
if we weren't polling to begin with.
1998-09-16 05:36:35 +00:00
scottr
4963603d0f
Found a race in scsipi_execute_xs(): if an asynchronous transfer completes
...
(probably due to an interrupt) between the time it is scheduled and the
time we get around to setting the SCSI_ASYNCREQ flag, we can lose the xs.
Fix this by checking to see if the transfer has already completed after
the scsi_cmd function returns SUCCESSFULLY_QUEUED, and just return to the
caller if so.
1998-09-16 05:35:50 +00:00
thorpej
43f5b65e23
Define the new sigcontext structure.
1998-09-15 23:14:40 +00:00
thorpej
a034a22862
Need 21 longs for jmp_buf now, due to 128-bit signal mask (and use
...
of the sigcontext structure in the jmp_buf).
1998-09-15 23:06:41 +00:00