Uploaded scripts work better if they are little endian, as the
card's engine expects, so convert to le first.
Also clean up attach routine a bit (use pa_id and PCI_REVISION
instead of fetching it ourselves).
This makes the driver work on my macppc G4, it can decode and
display video and tuner input. Sound does not seem to work, but
this may be my wonky formac bktr-for-macintosh card.
- Windows put the chip in suspended mode, make sure we unsuspend
it. 1.43, by Takefumi SAYO <stake@po.shiojiri.ne.jp>
- Detect the revision of the Rhine chip we're using, and force reset
when the chip supports it. 1.65, by silby@freebsd.org
16-bit mono recording seems to work OK. 16-bit stereo recording
is missing the left channel for reasons unknown, fixes welcome.
8-bit recording still unsupported.
and avoid using MD myetheraddr() function.
This makes the driver MI, and closes PR kern/13797.
The PCI HME is a PCIO chip, which is composed of two functions:
function 0: PCI-EBus2 bridge, and
function 1: HappyMeal Ethernet controller.
The Ethernet address is (expected to be) in the PCI FCode PROM connected
to the EBus bridge (function 0) of the device.
Since the HME is on function 1, some magic is used to access to the PROM.
We don't have MI EBus driver since no EBus device exists (besides the
FCode PROM) on add-on HME boards. The ``not configured'' message for
function 0 is what is expected.
The SPARC case is currently unchanged. It needs interaction with OpenBoot.
card contains only one clock, which is already used by the other
DAC. The FM DAC can handle a few fixed-frequency choices.
thanks to Matthew Green for testing
FreeBSD, with cleanup/KNF by me.
Note: These chipsets are not well supported by the i810 driver in
NetBSD's in-tree xsrc (based on XFree86 4.2.1 at this time). However,
the driver works perfectly using bleeding-edge XFree86-current on my
Omnibook's i830MG with these agp changes.
isochronous reception routine for IEEE 1394 OHCI (fwohci). The
transmission part is under construction.
The minimum configuration options for this feature are:
# IEEE 1394 (i.LINK)
fwohci* at pci? dev ? function ?
pseudo-device fwiso 1
This change makes the driver work properly for the following card,
which used to function a bit weird:
eap0 at pci0 dev 10 function 0: Ensoniq CT5880 CT5880C (rev. 0x02)
eap0: interrupting at irq 9
eap0: TriTech TR28602 codec; no 3D stereo
augustss