286b3b171d
Add glue for APCI driver at cdev minor #31 and in console switch.
1997-05-12 08:17:53 +00:00
6cc1022d84
Garbage-collect an unneeded definition.
1997-05-12 08:14:01 +00:00
a492e1df80
Add a kernel driver for the APCI 8250-like UARTs that live in the
...
Frodo ASIC, originally contributed by Mike Smith
<mike@pressed.spam.frisbee.net.au>, but reworked by me to:
- Essentially duplicate the dca driver, modifiying where necessary
to work with the APCI.
- Deal with the different Frodo autoconfiguration model.
- Don't attach a tty to the 0th UART - it's not really useful for much
more than the Domain keyboard.
- Added a routine to check for the existence of a DCA at select code 9.
On most models, the 1'th UART is mapped to select code 9 by the PROM,
and on these models, we do _NOT_ want to attach the device as an APCI.
However, on the 425e, this mapping does not take place, so we attach
as an APCI. The 2'th and 3'th UARTs always get tty instances.
- Add console support which will only be invoked on the 425e (i.e. check
for DCA at 9, and defer console to it if it exists).
1997-05-12 08:12:36 +00:00
a155715d44
Add a driver for the Apollo Utility Chip (a.k.a. "frodo"), contributed
...
by Mike Smith <mike@pressed.spam.frisbee.net.au>, with some changes to
the autoconfiguration model and slight changes to the interrupt glue
by me.
1997-05-12 08:03:48 +00:00
2392fb2a1c
Bump version: Added APCI console support
1997-05-12 07:58:08 +00:00
83c63bd2de
- Always build a romout() stub.
...
- If kbdnmi() returns, stop cold, since it shouldn't.
1997-05-12 07:56:00 +00:00
f39885279b
- Define INTIOBASE here for use by the standalone programs.
...
- Add some extern's for "userom" and romputchar()
1997-05-12 07:54:45 +00:00
4e0ee78444
- Always build the romputchar() glue.
...
- Don't set "userom" in the trap handler (we didn't before, but we've
removed the previous CPP conditional that was used to enable it.)
1997-05-12 07:53:02 +00:00
eac0352a9e
In kbdnmi(), after we have cleared the interrupt condition, reset
...
the machine, rather than simply returning to the assembly NMI handler.
Previously, the assembly handler would simply jump back to begin:, which
would frob the stack, and re-clear the BSS. However, this is not sufficient,
as there may be state in initialized data that must be restored. Thus,
the only reasonable solution is to re-load the boot block.
1997-05-12 07:51:32 +00:00
c25bfe1365
Don't use hardcoded hex for the address of the internal HP-IB interface.
...
Instead, use definitions from <hp300/dev/dioreg.h>
1997-05-12 07:48:23 +00:00
82ae3a106e
Don't use a hard-coded hex address for the 0'th APCI port; use definitions
...
from <hp300/dev/frodoreg.h>
1997-05-12 07:47:03 +00:00
0c5b002449
Add prototypes for standalone APCI driver.
1997-05-12 07:45:41 +00:00
05333d3fa5
- Add glue for standalone APCI console driver.
...
- Make the romputchar() useage conditional only on "userom".
1997-05-12 07:44:53 +00:00
225fbfa100
Build the standalone APCI driver.
1997-05-12 07:43:18 +00:00
bbbc6052c1
Add a standalone APCI driver, adapted from the standalone DCA driver
...
by me. This driver should only be invoked when there are no other
suitable console devices present in the system. This situation currently
exists on the 425e, for which we do not have a frame buffer driver,
and who's PROM does not map the second APCI UART to select code 9,
like is done on the 4{00,25,33}{t,s}.
1997-05-12 07:41:55 +00:00
cc4a1553a1
Eliminate bogus redefinitions of standard targets.
1997-05-09 07:50:03 +00:00
84bca5d679
Don't use _SUBDIRUSE outside of bsd.subdir.mk.
1997-05-07 17:28:47 +00:00
7f69a90075
whitespacos i missed
1997-05-07 00:29:18 +00:00
3490941ddb
cleanup unecessary quotage of options
1997-05-07 00:27:33 +00:00
4abf5a1a72
be consistent with use of spaces and tabs.
...
don't need quotes around options with _'s in the name
1997-05-06 00:56:53 +00:00
3a12db07c6
Update for USELEDS changes (including: garbage-collect LED frobbing
...
code; it has moved to leds.c)
1997-05-05 21:15:41 +00:00
500498e411
Update for USELEDS changes.
1997-05-05 21:14:04 +00:00
e677b62290
Garbage-collect LED-related stuff.
1997-05-05 21:12:49 +00:00
aec958ddf3
Don't initialize the DMA controller here.
1997-05-05 21:11:59 +00:00
95bae625a2
Update for USELEDS changes.
1997-05-05 21:09:13 +00:00
9c8fdf3dad
Use dio_intr_establish().
1997-05-05 21:08:26 +00:00
9eddfbfca3
Update for USELEDS changes.
1997-05-05 21:07:31 +00:00
ff163c6424
Use dio_intr_establish().
1997-05-05 21:06:41 +00:00
feb623a9ea
- Use dio_intr_establish().
...
- Update for USELEDS changes.
1997-05-05 21:05:32 +00:00
3a85f14da4
Use dio_intr_establish().
1997-05-05 21:04:16 +00:00
73b24faec6
Do a bit of spring cleaning.
1997-05-05 21:02:39 +00:00
82cab4fef4
Prototype dio_intr_establish() and dio_intr_disestablish().
1997-05-05 21:01:33 +00:00
5bada123f8
- Initialize the DMA controller in dioattach().
...
- Implement dio_intr_establish() and dio_intr_disestablish().
1997-05-05 21:00:32 +00:00
0a8e2a9ce8
Use dio_intr_establish().
1997-05-05 20:58:18 +00:00
bd2bc06c75
- Make "USELEDS" a defopt'd option, so we can generate dependencies on
...
it. Conditionally compile leds.c on USELEDS.
- Rearrange mainbus and intio declarations slightly.
- Add declaration for the forthcoming "frodo" driver.
1997-05-05 20:57:29 +00:00
663cee4555
Pull the LED frobbing code out of machdep.c. Since there is more than
...
one LED on an hp300 SPU, rename the file to indicate plurality.
1997-05-05 20:54:34 +00:00
397e92e33c
New-style kgdb_machdep.c, mostly duplicated from the sun3 port, modified
...
slightly by me.
1997-05-05 20:51:05 +00:00
95dd345f81
Garbage-collect old KGDB code that is no longer used.
1997-05-05 20:48:26 +00:00
94313a874b
Oops; reverse sense of previous test.
1997-05-03 08:46:09 +00:00
1dafb51ea6
Eliminate unused variable in '030-only kernels.
1997-05-03 08:41:29 +00:00
fc324bb0b9
Eliminate unused variable when !USELEDS.
1997-05-03 07:09:57 +00:00
766d429d62
Correct a comment long since outdated.
1997-05-01 16:24:26 +00:00
989ed431e1
Oops, the numbers for "t" and "s" got swapped around. No functional
...
difference, just correct now.
1997-05-01 05:26:48 +00:00
97a6c32e58
Garbage-collect a bunch of _very_ hp300-specific code, most of which
...
doesn't work anyhow (due to current and future fundamental differences
between NetBSD and HP-UX device semantics). This can probably be shared
with other m68k ports now.
1997-04-27 21:38:57 +00:00
ba0a5d5c58
Bump version: Better SPU detection code
1997-04-27 21:18:31 +00:00
8b4cae0516
CPU -> SPU
1997-04-27 21:17:13 +00:00
3cb561ed9f
Don't define our own machineid values - pull in <machine/hp300spu.h>
1997-04-27 21:15:14 +00:00
fbad957c52
Update getmachineid() for new machineid values.
1997-04-27 21:13:55 +00:00
767517edcc
Don't even look for a Domain keyboard if we're not a 400, 425, or 433.
1997-04-27 21:12:43 +00:00
5b511796c1
Uniquely identify 345 vs. 375 vs. 400 and 380 vs. 425. Adapted by me from
...
code provided by Mike Smith. While I'm here, convert this file to use
macros from <machine/asm.h> rather than making assumptions about how
C labels are handled.
1997-04-27 21:10:06 +00:00
cdb54b8d65
Update for new SPU options.
1997-04-27 21:06:29 +00:00
b27a863b02
Generate option headers for SPU type options, so that we may generate
...
dependencies on them.
1997-04-27 21:05:49 +00:00
772891accd
Use information provided by <machine/hp300spu.h> to determine if we
...
might have a physical address cache.
1997-04-27 21:02:34 +00:00
650df29d4d
These files depend on things in <machine/hp300spu.h>
1997-04-27 20:58:55 +00:00
18a931000e
Use <machine/hp300spu.h> to determine if we might have a physical address
...
cache.
1997-04-27 20:54:39 +00:00
544f501d29
Rewrite identifycpu() to be partially table-driven, and to be more
...
sane in general. Since we can uniquely identify each SPU type
(except for 318/319/330, because there _are_ no differences, really),
require that the appropriate SPU option be configured into the kernel.
1997-04-27 20:53:30 +00:00
d62e267a0c
Uniquely identify 345 vs. 375 vs. 400 and 380 vs. 425, useful when
...
looking for hp4xx-only hardware during autoconfiguration. Code
mostly from Mike Smith, with a few changes by me.
1997-04-27 20:50:01 +00:00
9d4c5c9106
- Define new machineid and mmuid constants.
...
- Rearrange slightly.
1997-04-27 20:47:23 +00:00
fc79829eab
#include <machine/hp300spu.h>
1997-04-27 20:43:37 +00:00
80ff0f0f2f
- Move a bunch of hp300 SPU-specific stuff out of cpu.h, and place it
...
in new hp300spu.h file. This includes the code that associates
model number with cpu/mmu/cache combinations.
- Define "mmuid" constants for several models, derived from code
provided by Mike Smith.
1997-04-27 20:37:07 +00:00
f5ccce44c8
srt0.s renamed to srt0.S via repository copy Magick - we want this
...
file to be preprocessed before it is assembled.
1997-04-27 20:29:43 +00:00
d8b7a2f037
- Don't make assumptions about how C labels are handled, use macros
...
provided by <machine/asm.h> instead.
- Adjust for <m68k/m68k/trap_subr.s>
1997-04-25 02:17:38 +00:00
722ead42ca
Don't make assumptions about how C labels are handled, use macros
...
provided by <machine/asm.h> instead.
1997-04-25 02:16:38 +00:00
5fddec888d
Add Domain keyboard support source files (oops, forgot to commit this
...
file when I integrated the rest of it!). Fixes PR #3523 , from
Thorsten Frueauf <frueauf@ira.uka.de>.
1997-04-24 20:39:26 +00:00
6a2fc99857
STRIP -> STRIPFLAG
1997-04-17 07:27:46 +00:00
ea528012b3
dcmreadbuf() should not return immediately if the tty hasn't been opened;
...
this fixes a kgdb goof. Found by inspection.
1997-04-15 22:45:14 +00:00
4767ae8d9d
Regsiter description for APCI UART found on HP 9000/400-series
...
systems with a Frodo Utility Chip. This is essientially an 8250 with
3 bytes of padding between each register. From mike smith
<miff@spam.frisbee.net.au>.
1997-04-14 20:36:11 +00:00
89a63d43fa
Build HIL and Domain keyboard support. Include UK HIL keymap.
1997-04-14 19:09:01 +00:00
8f994f2c15
Add support for the Apollo Domain keyboard, from mike smith
...
<miff@spam.frisbee.net.au> with some changes for integration by me.
1997-04-14 19:03:13 +00:00
f9cbf4e434
Implement an autoconfiguring indirect keyboard driver, removing explcit
...
dependencies on the HIL keyboard.
1997-04-14 19:00:10 +00:00
5599d9bc87
Allowing forcing console on dcm with FORCEDCMCONSOLE (c.f. dca.c).
1997-04-14 05:58:32 +00:00
a78807e04c
Update for interrupt function and header name changes.
1997-04-14 02:33:16 +00:00
6f791ab8b2
Remove unnecssary #include.
1997-04-14 02:31:33 +00:00
064d13e0ad
Remove unnecessary softc member.
1997-04-14 02:30:45 +00:00
30166b9778
Rearrange the interrupt code slightly:
...
- place all interrupt-related macros, prototypes, etc. into <machine/intr.h>,
like other ports.
- rename isrlink/isrunlink/isrinit, etc. intr_establish/intr_disestablish/
intr_init, etc., and move to intr.c for naming consistency.
- don't call intr_init() twice.
1997-04-14 02:28:43 +00:00
f05b58b229
Use common m68k sigcode.
1997-04-13 02:37:15 +00:00
81f55f1cc8
regdump() is prototyped in m68k/cpu.h now.
1997-04-09 20:08:25 +00:00
7c20e290df
regdump() takes a struct trapframe *
1997-04-09 20:07:13 +00:00
9cf4ffce0a
- Garbage-collect signal-related stuff; use m68k/m68k/sig_machdep.c
...
- Garbage-collect regdump() and friends
- Convert hp300 to new crash dump format
1997-04-09 20:05:20 +00:00
577dabb739
Use <m68k/m68k/proc_subr.s>
1997-04-09 20:03:21 +00:00
f0f9811df2
Use the %x printf format where appropriate
1997-04-09 20:01:04 +00:00
62a635ac7e
- Remove redundant file directives
...
- Pull in m68k/m68k/sig_machdep.c
1997-04-09 19:59:57 +00:00
c3c59721e2
kcore.h for hp300 - just pulls in the common m68k kcore.h
1997-04-09 19:51:36 +00:00
1929ddf09c
Fix some #ifdef lossage if HP340, HP360, or HP375 is defined, but HP370 is not.
1997-04-06 21:40:35 +00:00
be3e57de4a
Changes to make a dcm-based console work properly:
...
- While servicing an rx, tx, or modem status interrupt: if we have a
NULL struct tty * or if the tty isn't open, just return.
- Skip the self test if we are the console; it manages to do funny
things to autoconfig messages. (XXX - this should be fixed)
1997-04-04 18:16:07 +00:00
2c0d2cb557
#ifdef DIOVERBOSE a variable needed only in such code.
1997-04-04 09:53:43 +00:00
aa88a240fe
Fix printf() and other warnings when compiled with DEBUG defined.
1997-04-02 22:37:21 +00:00
e0443987e7
Add netatalk netisr
1997-04-02 21:48:55 +00:00
40d1c295a2
Specify more aggressive warning options for C code.
1997-04-01 23:16:41 +00:00
6c7f504b20
Add forward declarations for struct exec_package and struct exec_vmcmd,
...
to minimize the number of unnecessary #includes.
1997-04-01 20:05:14 +00:00
54c4c9b37f
Catch up with COMPAT_HPUX changes, and make this compile with -Wall.
1997-04-01 19:59:59 +00:00
5be5fe416e
Relocate some prototypes needed for COMPAT_HPUX to hilvar.h
1997-04-01 19:29:09 +00:00
698c8410a2
Add prototypes, and make this compile with -Wall. Remove register
...
modifier from all declarations.
1997-04-01 03:12:06 +00:00
66c9485803
Add prototypes, and make this compile with -Wall.
1997-04-01 03:10:57 +00:00
43b1b8c08a
Relocate some prototypes needed by other MD code.
1997-04-01 03:07:19 +00:00
4c6e335897
Add prototypes as appropriate.
1997-04-01 03:03:56 +00:00
5485e1ff75
Need a common <m68k/pcb.h> for gdb.
1997-03-31 21:39:51 +00:00
c008fc0aa0
Add prototypes, and make this compile with -Wall. Remove register
...
modifier from all declarations.
1997-03-31 07:32:14 +00:00
ea23ab53c3
Add missing argument to diagnostic printf()
1997-03-31 07:30:41 +00:00
52cb2d2955
Add prototypes, and make this compile with -Wall. Remove register
...
modifier from all declarations.
Also, handle sc_flags better so that we don't lose track of the
DCM_ISCONSOLE bit.
1997-03-31 07:29:49 +00:00
thorpej