972ef526d2
Add hcsc, scsibus and some SCSI devices.
...
Also, add some useful compiler options to FOURMEG.
2001-06-02 10:47:55 +00:00
2d35661e6a
Use write_munti_1() to implement bus_space_write_multi_1().
2001-06-02 10:45:43 +00:00
ac0d39dfe8
Add write_multi_1().
2001-06-02 10:44:56 +00:00
3df8e425e7
Correct permissions on vmapbuf'ed pages. A read from a device is a write to
...
memory, and vice versa.
2001-06-02 10:44:02 +00:00
40033835d8
Comment DIAGNOSTIC, DEBUG out
...
Use the 'root on ? type ?' config by default, leave the nfs one commented out,
add line for root on ed0a
2001-06-02 10:37:27 +00:00
9bde6cff5c
remove bogus curly braces from a structure forward-declaration.
2001-06-02 01:19:29 +00:00
f6af05f407
Back the last revision off, upon Bill Sommerfeld's request
2001-06-02 00:46:00 +00:00
5dbe622e77
When polling, raise priority level to tty, to block keyboard interrupts
...
when the system is "warm", i.e. interrupts are not blocked anymore.
This seems to be necessary on my PS/2 Model 70 keyboard - without this,
system ends up in endless loop calling the keyboard intr routine if a key
is pressed when polling. This _may_ be just specific to level-triggered
interrupts PS/2 MCA uses, though it's more likely it's just the way the
particular keyboard controller works.
Discussed on tech-kern@.
2001-06-02 00:01:04 +00:00
b001ce9b90
g/c COMPAT_OLDBOOT from bootblocks, sprinkle some const
...
bump bootblock version to 2.10
2001-06-01 23:26:30 +00:00
7e716e6849
Memory map and register definitions for the Algorithmics BONITO
...
MIPS memory and PCI controller. This file is provided by Algorithmics.
2001-06-01 20:29:33 +00:00
2b5df8b7ff
vm_page_t -> struct vm_page *
2001-06-01 19:52:54 +00:00
5fbaedc40d
sync with GENERIC 1.405
2001-06-01 16:50:31 +00:00
71cb790fb5
Add support for the Algorithmics P-4032 board. This is totally
...
untested, since I have no P-4032 board, but it's no worse than
the current situation, which is "totally non-working P-4032
support in the ARC port, of all places".
2001-06-01 16:00:03 +00:00
23a3dc1508
If a bus doens't want to use an extent, don't force it to.
2001-06-01 15:57:31 +00:00
356699e86b
Fat-trimming.
2001-06-01 15:30:11 +00:00
c702830c42
The P-4032 has no ISA bridge/bus, so remove all P-4032 conditionals.
2001-06-01 15:20:06 +00:00
07187f8a43
Nuke FRAMEBUF_HW_BASE. This value is provided by the bootloader.
2001-06-01 14:08:35 +00:00
6349d0ae81
Nuke FRAMEBUF_{HW_,}BASE. This hack does no good.
2001-06-01 14:06:43 +00:00
ea77ec5725
Move some low-level code (SVC mode switching and PID address translation
...
disabling) which was written using inlined asm in initarm() to just after
the kernel entry point.
2001-06-01 14:04:29 +00:00
78aad8f79e
Mark evcnt(9) item as done.
2001-06-01 08:31:07 +00:00
37326d639b
Rename assembly files that are pre-processed by cpp to use an S suffix.
2001-06-01 04:20:04 +00:00
9f159a8918
Remove 4096-byte gap between .reginfo and .data, suggested by
...
Ian Taylor <ian@zembu.com>.
2001-06-01 03:55:30 +00:00
f4f6c1dd1c
Enable SCSI.
2001-06-01 03:53:29 +00:00
76b3b49bb8
Add support for jornada720's framebuffer.
...
The functionality is almost same as bivideo, and hardware rasops and
power saving are not yet supported.
2001-06-01 02:51:03 +00:00
f57a0847d2
fix off by one error. extra one page is needed for the case where
...
buffer is not page aligned (e.g. raw i/o case).
2001-05-31 20:56:29 +00:00
9bac50748f
"opt_ddb.h" should be included at the beginning of source file,
...
because some headers (in this case <systm.h>) refers symbols (e.g. DDB)
defined in the opt_ddb.h
2001-05-31 19:41:57 +00:00
59ba4788ce
Deprecate intrcnt/intrnames in favour of the generic evcnt(9) interface.
2001-05-31 18:46:07 +00:00
1a891f65d4
One more gcc-2.95 issue.
2001-05-31 09:19:25 +00:00
283e406cb0
drop to prom on "halt" as well.
2001-05-31 08:55:19 +00:00
da8f8f1e72
define _KERNEL_OPT as well as _KERNEL. we will use this in the future to
...
get kernel "opt_foo.h" headers, rather than _KERNEL && !_LKM.
2001-05-31 07:37:01 +00:00
1f4f9ae5c2
Fix minor typos.
2001-05-31 07:24:23 +00:00
f998b62e15
Fix commnet; hpcmips isn't x86 architecture.
2001-05-31 02:30:04 +00:00
299159546d
s/Alpha/MIPS/ in comment.
2001-05-31 02:20:55 +00:00
c227148511
PRiD 0x18 is shared by RC32334, 332 and 355. These SoCs are
...
distinguished by SYSID register in the system controller. Note
that PRiD 0x20 is for a standalone RC32364 processor which has the
same 32300 core inside. Rather better to name them MIPS32 ISA.
2001-05-31 02:06:26 +00:00
ba87a6d444
Add gcc-2.95 version.
2001-05-30 20:37:48 +00:00
d84d2c6c85
add missing #include "opt_kgdb.h"
2001-05-30 15:24:23 +00:00
e2c5f5866f
Use sys/arch/arm/arm/blockio.S.
...
Actually, these functions aren't used by hpcarm but is necessary to be
able to link sys/arch/arm/mainbus thing.
2001-05-30 14:39:19 +00:00
49927dd845
Add itepoll() prototype as suggested by 'maximum entropy' (pr#13047).
2001-05-30 14:25:07 +00:00
2eae10adb5
Inline bswap{16,32} when the argument is constant.
2001-05-30 13:08:34 +00:00
72943f1165
Pasto.
2001-05-30 12:52:06 +00:00
67afbd6270
use _KERNEL_OPT
2001-05-30 11:57:16 +00:00
f32430d518
Add a case clause for IDT RC32332/RC32334 processor personality
...
inside a commented-out block.
2001-05-30 09:06:28 +00:00
16a60efd2c
Add PRiD 0x18 for IDT RC32332/RC32334 processors.
2001-05-30 07:21:51 +00:00
2d632efc89
Start using the blockio functions. This makes raw reads from hcsc 20% faster
...
(is that all?).
2001-05-30 00:19:43 +00:00
f15491e9d3
Move the declarations of blockio.S functions from katelib.h to a new, exciting
...
<arm/blockio.h>. katelib.h includes it for compatibility.
2001-05-30 00:16:36 +00:00
d51c27dfa8
Add read_multi_1() which does what it says fairly fast.
2001-05-30 00:14:09 +00:00
966a1b86f8
initialize the b_dep field in malloc()'d buffers. fixes PR 13065.
2001-05-29 23:08:06 +00:00
7d9a4dbad7
Move blockio.S from sys/arch/arm32/arm32 to sys/arch/arm/arm, since I want to
...
start using it on arm26.
hpcarm gets to keep its own version, since it's not identical and I haven't
got an hpcarm box to test.
2001-05-29 23:03:20 +00:00
d674a69f7a
And now we're running!
2001-05-29 21:55:00 +00:00
2de1ab0486
Add ci_cpuid.
...
Change the CLKF_ macros because the idle loop is now running at IPL1.
2001-05-29 21:29:32 +00:00
bjh21