26f708a5a3
Handle the Linksys USB100H1 like the other Linksys adapters.
...
Restructure the code a little.
2000-05-06 20:38:59 +00:00
fd58a6ae12
Regen.
2000-05-06 18:28:36 +00:00
13d8353ffc
Add Linksys USB100H1, an Ethernet and HomePNA adapter.
2000-05-06 18:28:01 +00:00
82cfd6b42a
Simplify an expression.
2000-05-06 14:35:28 +00:00
4c46b93c8d
Add bba.
2000-05-06 14:34:31 +00:00
5e209d22f7
Print the usual interrupt line.
2000-05-06 00:46:19 +00:00
6a1547768c
Typos.
2000-05-06 00:44:00 +00:00
2b44ae84ee
LP64 printf fix. (I wish size_t was unsigned long on all platforms).
2000-05-05 17:52:38 +00:00
904ca34539
Ops, restore sync/wide parameters after a reselect.
...
Also, better handling of parity errors.
2000-05-05 09:32:48 +00:00
4c9516aa3b
Rework the command queue, to avoid having commands blocked at the end
...
of the queue. Load is now properly balanced across all disks of the same bus.
2000-05-05 09:05:44 +00:00
fc89ce9f53
Oops, nuke unused structure member.
2000-05-04 17:27:25 +00:00
2306b4a34e
When a WDTR message is rejected, initiate sync negotiation anyway.
...
When a SDTR message is rejected indicate that target is async
Add a missing bus_dma_sync call.
2000-05-04 17:18:27 +00:00
f5b572d26b
- LP64 issues in debug printfs.
...
- on a phase mismatch, do byte recovery only if we were in data phase.
Otherwise just clear the fifo.
- Properly handle reject of a sync or wide negotiation.
2000-05-04 16:56:13 +00:00
babd44e7a1
Ops, regen siop.out from the last siop.ss.
2000-05-04 15:44:35 +00:00
c8ff442f72
Add a flag hold in scratcha0, set when we're doing a data transfer. Used
...
for save data pointers.
2000-05-04 15:42:42 +00:00
319d44bfb1
Adjust asm patterns for newer versions of GCC.
2000-05-03 21:20:07 +00:00
5a5c88dc4e
`typedef void ifnet_ret_t;' isn't valid C -- use #define, instead. Also,
...
don't abuse the C preprocessor.
2000-05-03 21:08:02 +00:00
081e7cbdaf
`typedef void ifnet_ret_t;' isn't valid C -- use #define, instead.
2000-05-03 20:52:29 +00:00
b29178acf3
Remove unnecessary junk on #undef line that some C preprocessors
...
get cranky about.
2000-05-03 19:19:04 +00:00
e37397c2e8
`typedef void ifnet_ret_t;' isn't valid C -- use #define, instead.
2000-05-03 19:17:54 +00:00
ab635a46d3
Slight change to previous.
2000-05-03 19:15:27 +00:00
2d66ccbd13
Don't return an uninitialized error code.
2000-05-03 18:58:37 +00:00
01e8438aa8
Fill in ccb->ccb_req.sgcount with the value that's guaranteed to
...
be initialized.
2000-05-03 18:58:15 +00:00
d0d92c23d0
Use USBD_NORMAL_COMPLETION in the previous.
2000-05-03 18:21:36 +00:00
ffe599486c
When emulating UHF_PORT_POWER for the internal hub, make sure to initialize
...
the status return value.
2000-05-03 18:14:49 +00:00
3bb9a5f666
- do sync/wide negotiation
...
- use a circular queue for the start slots, so that order has better chances
to be preserved.
2000-05-02 19:03:02 +00:00
621ef4d785
Add am7930 audio driver.
2000-05-02 06:43:05 +00:00
f9dbbf4c92
Make am7930 driver machine independent. PR 10032 from Gregory McGarry.
2000-05-02 06:30:49 +00:00
8ca78ff825
In siop_lookup_product(), actually check the PCI *vendor* ID as well as the
...
product ID.
Prevents false matches of other devices, such as the DEC 21050 ppb.
2000-05-02 03:59:35 +00:00
712326ecbd
Traditionally, the floppy controller was configured at 0x3f0 for 8 ports,
...
but the registers actually begin at 0x3f2, and this is what PNPBIOS reports
for the floppy controller resources. Adjust the register offsets and the
mapping of them for the ISA front-end to compensate, so that the PNPBIOS
attachment of the floppy controller actually works.
2000-05-02 03:33:45 +00:00
5e915fcab9
Nuke some dead code.
2000-05-02 03:32:09 +00:00
c7d698ac41
Support recording conversions that change the sample size. PR 10029, from Gregory McGarry.
2000-05-02 00:00:00 +00:00
2365a92cb5
Add Creative Music System driver. From Gregory McGarry <g.mcgarry@ieee.org>
2000-05-01 22:48:33 +00:00
4e1e58e353
Change the way the codec is access to mimic how Linux&FreeBSD does it.
2000-05-01 17:15:41 +00:00
07f142cd50
Add some more debug output.
2000-05-01 17:10:40 +00:00
9498452c05
- Move some initialization into MI rl_attach() from each bus attachment.
...
- Use proper CARDBUS_* macro in if_rl_cardbus.c
- Use product ID read from PCI configuration space rather than from EEPROM
in if_rl_pci.c.
Patch sent from Masanori Kanaoka <kanaoka@ann.hi-ho.ne.jp> and
some cosmetic changes by me.
2000-05-01 15:08:50 +00:00
ac6e6c980d
Add Seeq 8003 register definitions.
2000-05-01 08:06:17 +00:00
7d3231b37a
Mouse move event should be made before mouse bown event. Without that,
...
you may got a mouse down event in strange plase.
2000-05-01 07:36:58 +00:00
fec9706315
Remove unneeded #include "mpu.h"
2000-04-30 22:16:56 +00:00
aaa405eab7
Add driver for C-Media CMI8x38 Audio Chip. From Takuya SHIOZAKI <AoiMoe@imou.to>
2000-04-30 21:59:58 +00:00
1dbea6c0f9
Add new microcode for all of the supported boards.
...
Fix minor glitches.
Add preliminary support for ASB-3940U3W host adapters; it might work w/ autotermination on.
ASB-3940U3W support is not yet tested due to lack of board.
2000-04-30 18:52:14 +00:00
ff84aeb762
Add ASB-3940U3W host adapters (AdvanSys)
2000-04-30 18:46:18 +00:00
d2679acf60
Add ASB-3940U3W host adpeter (AdvanSys)
2000-04-30 18:34:53 +00:00
439b360ab9
Modify EEPROM read functions and handle also 9356 EEPROM.
...
Fixes kern/9861.
2000-04-30 12:00:40 +00:00
e623cd6f8f
Discard these old leftovers from the IMP and trailer days!
2000-04-30 11:50:50 +00:00
6f6bea9eed
Change to use new ubareset() functionality.
2000-04-30 11:46:49 +00:00
6758522763
Add function uba_reset_establish() to register reset functions like
...
uba_intr_establish(). Basic framework for resource (BDP) allocation,
not yet finished.
2000-04-30 11:46:03 +00:00
8995505723
Rewritten (most of) the DEUNA/DELUA driver. No more data copy, packet
...
header fiddling and forget driver support for trailers.
2000-04-30 11:43:26 +00:00
73ac8c709b
Add a concept of the `background attribute'. This is the same as the
...
current attribute, but has all non-color flags turned off. Use this when
doing erasure, as this allows us to optimize repainting in curses.
XXX The way the default attribute is handled is totally bogus and needs to
be fixed.
2000-04-28 21:56:16 +00:00
23bcab075a
Don't request sense after INQUIRY. From FreeBSD & OpenBSD.
2000-04-28 21:34:05 +00:00
d2e2dce826
Regen.
2000-04-28 20:54:39 +00:00
0b9c397110
Add 2 more eap audio devices.
2000-04-28 20:54:10 +00:00
4cacfc5684
change 10base-t media _setting_ to set autodetect instead.
...
Contrary to what the rtl8019 docs say, this seems to be necessary.
Observed by myself when implementing non-auto earlier, and independently
complained about by Antti Kante in PR 9962.
2000-04-28 17:49:03 +00:00
bbb8c56fcb
add PCI_MAPREG_PPB_END (PCI-PCI bridge) PCI_MAPREG_PCB_END (PCI-Cardbus bridge)
2000-04-28 17:12:45 +00:00
308fa27a0d
Unmute some mixer controls by default. From OpenBSD.
2000-04-28 12:39:59 +00:00
520f9dc581
pasfind(): avoid silly bug - if bus_space_map() of SB I/O space failed,
...
we used bad label and tried to bus_space_unmap() invalid memory
region
Fixes port-i386/9992 by Jarkko Teppo <jate@uwasa.fi>.
2000-04-28 08:51:42 +00:00
61e3f39169
Fix copyright notice as per request from the author.
2000-04-28 03:48:56 +00:00
fcf693203f
More big-endian fixes from Izumi Tsutsui.
2000-04-27 16:49:07 +00:00
30c20f930f
Change my email address.
2000-04-27 15:26:44 +00:00
91878e8679
Reorder some #defines.
2000-04-27 15:25:36 +00:00
fe54b787dc
Add NetBSD RCS Id and copyrigth notice.
2000-04-27 14:08:09 +00:00
bf7a94ec2b
Fix copyrigth notice.
2000-04-27 14:06:57 +00:00
2fb93595b2
Note siop changes.
2000-04-27 12:48:59 +00:00
db11351ced
Make sure the config structure allocated during autoconfiguration actually
...
gets initialized properly. Should fix PR#9816.
2000-04-27 00:57:48 +00:00
ce7f4dafe1
Big-endian fixes from Izumi Tsutsui.
2000-04-26 20:00:31 +00:00
ef25b7769e
Regen.
2000-04-26 17:30:59 +00:00
0defe75e76
Add product ID for the PLX Technology 9060ES PCI bus controller. Note this
...
ID isn't normally seen, as just about every device with a PLX on it loads
a different ID from an EEPROM, but there's no harm in documenting it.
2000-04-26 17:30:35 +00:00
d5d441a516
- Bump xfer size limit to the maximum allowable.
...
- 20 CCBs is enough to maintain a constantly stuffed inbound FIFO.
2000-04-26 15:58:01 +00:00
75bb77ed56
- Rearrange some spl*() calls to be as intended.
...
- Scan cac_cd in cac_shutdown(), don't use a SIMPLEQ.
2000-04-26 15:54:02 +00:00
b4f524c223
- Allocate mbuf dynamically on Tx and use bus_dmamap_load_mbuf(9).
...
- Call bus_dmamap_sync(9) as appropriate.
- Leave only register declarations in rtl81x9reg.h and
split other stuff into rtl81x9var.h.
bus_dma(9) code mostly taken from thorpej's if_rtp.c.
2000-04-26 14:02:34 +00:00
8b8597dae0
Recognize the Crystal CS4297A codec, and add a couple of macros
...
to manipulate AC97 codec IDs.
2000-04-26 00:00:41 +00:00
eba93ce7d2
Ops, need to restore correct DSA value after a phase mismatch, we may have
...
been interrupted during a S/G operation.
2000-04-25 20:02:33 +00:00
88be4752d0
- Change the script to start new commands in an asyncronous way, using
...
'command slots' in which the host can put command and wait for the script
to start them
- Change siop.c to do full disconnect/reslelect, allowing as much as one
command per target/lun to run in parallel.
- Fix bug in registers init where a board without BIOS would end at
ID 0 (now the driver works on alpha too).
- better handling of messages, sending back a MSG_EXT_SDTR in response to an
incoming MSG_EXT_SDTR, and MSG_MESSAGE_REJECT for unhandled messages.
- fix use of bus_dmamap_sync() and htole32().
- supports shared interrups
- change some int8 and int16 to int, for alpha and mips benefits ( suggested by
Toru Nishimura)
2000-04-25 16:27:05 +00:00
5ee6872b46
- Add support for NOP instruction
...
- fix dsp value for second operand of memory move, so that patch list will be
correct.
2000-04-25 16:01:16 +00:00
df70862e8c
Insert (very conservative!) bus_space_barrier() calls at all register accesses.
...
The bus_space(9) man page says you've gotta have them...
2000-04-25 14:28:13 +00:00
6369b56c99
Fix two endian problems. rtk now works on macppc.
...
- Use le32toh() on reading rxstat from the Rx DMA buffer.
- rl_read_eeprom() should return EEPROM values in little endian
when caller requires byte-stream data.
bus_dma(9) fixes are still on-going.
XXX rtk on macppc seems to make tons of CRC errors...
XXX Does it work fine on i386 or others?
2000-04-25 14:16:46 +00:00
74beeca710
Move the size of the mapped bus_space region into the bus independent softc.
2000-04-25 09:20:54 +00:00
aae26d0d0c
Move a test if the MIDI is open outside a loop in the interrupt routine.
...
Some stylistic changes.
2000-04-24 17:55:24 +00:00
6f9392b42a
Merge changes of sys/pci/if_rl.c rev. 1.8->1.10. (from kern/9870)
...
Also remove unused pbase, vbase and PCI_CAP_PWRMGMT declarations.
2000-04-24 15:25:00 +00:00
4d0217d2c1
Remove item.
2000-04-23 23:21:32 +00:00
007a7dbfd8
Update with new files.
2000-04-23 23:19:36 +00:00
0e5c7f55af
Regen.
2000-04-23 19:35:35 +00:00
23f3c0074f
Sync with FreeBSD: add two more adapters.
2000-04-23 19:03:45 +00:00
0cde36f780
Carve off the ISA configuration bits from the floppy driver. Driver is
...
still ISA-specific, but we can attach ISA instances with different
configuration mechanisms now.
2000-04-23 16:47:45 +00:00
b12ed6c03b
Make it possible to move a device to its unconfigured state by
...
using config #0 .
2000-04-23 00:46:59 +00:00
bc5e86601e
Add an item.
2000-04-22 22:52:15 +00:00
3a27942ba8
Add a clarifying comment.
2000-04-22 22:50:44 +00:00
8ec60a189f
Make sure the payload is aligned when using E2-over-802.11 encapsulation,
...
as enabled by the LINK0 flag. Fixes PR kern/9700.
2000-04-22 22:36:14 +00:00
5ea1af4bf4
Regen.
2000-04-22 18:07:19 +00:00
f468f877de
Add some CMedia audio devices. From T.SHIOZAKI <AoiMoe@imou.to>
2000-04-22 17:32:02 +00:00
11379e0ab6
Add the famous "rl" disk.
2000-04-22 16:46:45 +00:00
84f24d3c29
The D-link serial adapter lies about being self powered. It's obviously
...
bus powered. How can we do power budgeting when the devices lie?
2000-04-21 21:02:44 +00:00
60bb0d050d
Add some comments.
2000-04-21 20:58:56 +00:00
d592132506
the status register is _always_ at 0x420 -- grr. How should I put this in the config file rather than hard-coded?
2000-04-21 20:13:41 +00:00
46fb8de93a
Use a 255 ms interrupt interval even if the descriptor in the hub asks
...
for something else, because the spec says that it should be 255.
2000-04-21 19:51:43 +00:00
6bc85d9fa0
Minor nit: Use another TAB in formatting to make the columns straight.
2000-04-21 19:49:59 +00:00
171d9f6a3f
First version of keep-track-of-used-devices file.
2000-04-21 19:05:43 +00:00
4379f92630
Make sure to read the full hub descriptor (including the deprecated field).
2000-04-21 18:57:40 +00:00
19ada4a82a
Snapshot of work in progress: new driver for the NCR 53c8xx SCSI controller
...
(the name 'siop' is still being discussed, may change).
Only basic disconnect/reselect for now, no sync/wide negotiation.
Tested with 810A, 875 and 895 on i386 only.
The bus-independant part should also be able to handle the 53c720 and 53c770.
A new driver with enhanced script should appear for the 825/875/895 'soon'.
2000-04-21 17:56:58 +00:00
cd5411b382
Script assembler for the NCR 53c7xx/8xx scsi controller. Initial work
...
done by Michael L. Hitch, support for the 8xx and some improvements
by me.
2000-04-21 17:50:07 +00:00
1118b3ee75
Add driver for Addonics FlexPort 8S (and probably 4S, but not tested)
2000-04-21 17:48:30 +00:00
3d9d091685
Change the exact sequence of commands when a hub is attached to follow
...
Windoze more closely. This makes more devices work.
After two years of doing USB work I've finally access to a USB protocol
analyzer. Which means I should be able to mimic what Windoze does in
certain cases instead of just following the specs. Following the specs
is not enough since the devices often don't.
2000-04-21 16:05:50 +00:00
878deae672
Add a define for some slack port power up time.
2000-04-21 16:01:31 +00:00
9fb474fcf0
Regen.
2000-04-21 15:59:43 +00:00
f791a72b9c
Change error reporting in port reset function.
2000-04-21 15:58:55 +00:00
3f08804668
Pretend we know how to turn on port power (it's always on).
2000-04-21 15:40:01 +00:00
fdeba432d2
Add a comment about a non-obvious use of a #define.
2000-04-21 15:38:55 +00:00
d744db2ea9
Add D-link serial adapter (made by someone else :).
2000-04-21 15:37:50 +00:00
e1950d4ffa
regen.
2000-04-20 23:40:27 +00:00
3e4e60beeb
Add Zip 250.
2000-04-20 23:39:50 +00:00
13c39a5cb6
Put the rasops attributes in conf/files so that everyone can run
...
config(8) without pulling in files.rasops. There is prior art for
this, e.g. audio.
2000-04-20 18:23:37 +00:00
3e49436f9d
Replace rcons console code with rasops console code.
...
Console text should now be supported on all TGA cards;
8- and 32-bit TGA and 8-bit TGA2 have been tested.
Implement accelerated character drawing, scrolling, and clearing.
Stop clearing "odd" in VHCR; it's unnecessary and hurts performance.
Use bus_space_vaddr() instead of a local hack.
2000-04-20 05:25:20 +00:00
173c535a95
Add one, remove some.
2000-04-19 16:17:45 +00:00
784977f319
Changes the name of RealTek driver. The new name is `rtk'. This used
...
to be called `rl' and it conflict with RL vax disks, canonical and
historical unix driver name.
This changes are minimal: it only changes the name of RealTek driver.
The filename of source code and a lot of the letter `rl' in source
files should be changed shortly.
2000-04-19 08:44:31 +00:00
5803932005
Regen
2000-04-19 07:52:33 +00:00
01beba012a
Add some Symbios devices.
2000-04-19 07:51:20 +00:00
a2bf544200
Allocate the variable `inqbuf' in scsi_probedev on stack rather than
...
statically. Since this function may called for another luns immediately,
allocating it statically doesn't make sense and may cause race condition
as pointed out by PR#9749.
2000-04-19 04:49:50 +00:00
debe6e88b6
Calculate an offset of mailbox_in correctly by renaming BHA_MBO_OFFSET
...
to BHA_MBX_OFFSET and using it also for mailbox_in. Since all mailboxes
should be placed in a single continuous memory due to a hardware limitation,
an offset of any mailbox can be/should be calculated using a same expression.
2000-04-19 02:39:12 +00:00
edfd8044ec
Maintenace: add definitions for command status register.
2000-04-19 01:19:04 +00:00
0d117aa518
regen for changed pcidevs
2000-04-18 16:38:12 +00:00
88e62f7c84
SiByte, Inc. is vendor 0x166d.
2000-04-18 16:37:00 +00:00
5845348e54
Revert last change (the last change was not necessarily desirable, and
...
had some other minor side-affects that were troublesome).
2000-04-17 19:35:12 +00:00
a267efd061
#if 0 the (way bogus) PCI_CLASS_COMMUNICATIONS/PCI_SUBCLASS_BRIDGE_PCI (!!!)
...
match pointed out (again?) by Johan Danielsson, after i repeatedly told
him not to do something similar in com_cardbus.
2000-04-17 16:45:04 +00:00
5c507c46b5
regen
2000-04-17 12:01:20 +00:00
4f797c7b55
Panasonic KXLC003
2000-04-17 12:00:35 +00:00
7dbedb5a11
rewrite match function to use CIS information
2000-04-17 09:21:59 +00:00
1f1d169e20
extract serial funce
2000-04-17 09:16:38 +00:00
6e5b98b12c
add serial funce entry
2000-04-17 09:15:58 +00:00
d8bccc7c6e
Regen.
2000-04-17 00:26:45 +00:00
fcd420cf5d
Add product ID for the S3 Trio3D/2X AGP graphics adapter.
2000-04-17 00:26:22 +00:00
0ba1516cd7
Use a default attribute to restore the display mode to original settings.
...
Also, pass in WSATTR_COLORS at all times when allocating screen attributes
since without it we cannot even get black-on-white from rasops(9).
2000-04-16 21:49:49 +00:00
876b21e514
Add more items and reorganize.
2000-04-16 18:38:44 +00:00
0aae0cd7a6
only print packets if debug > 1
2000-04-16 17:03:42 +00:00
9403f3fec8
Reset the device before starting the init sequence.
...
Add shutdown hook.
2000-04-16 09:55:39 +00:00
c71398f7a9
Don't allow configuration where the specified SectPerSU may result in IO larger
...
than MAXPHYS being sent to underlying devices. Addresses PR#9868.
Will change if/when MAXPHYS goes bye-bye.
2000-04-16 03:24:26 +00:00
6d6ad52fd4
Regen.
2000-04-15 15:57:59 +00:00
f6b73a654c
Add another camera.
2000-04-15 15:57:27 +00:00
8c1897c2fd
Also add the Intel ID for the LAN+MODEM56 card to the csdevs list to get
...
it working.
2000-04-15 06:29:25 +00:00
501c07e5d4
Add an "iopener" keymap variant, giving us.iopener and
...
us.iopener.swapctrlcaps. This makes F1 ("Back") into Escape, and shifts
the other keys over by one, so F2-F12 ("Forward"-"Home") become F1-F11.
2000-04-14 23:11:08 +00:00
321bc31690
Remove spurious splx() call.
2000-04-14 20:33:48 +00:00
c56f4bceb8
Fix some callout fallout. Hi Jason!
2000-04-14 19:31:50 +00:00
b6ef06e018
Add a file I forgot.
2000-04-14 18:15:47 +00:00
2ed37fcf5d
Add driver for FTDI FT8U100AX serial adapter.
...
XXX This is still experimental and needs more work.
2000-04-14 14:51:22 +00:00
219f3c9ccf
More debug.
2000-04-14 14:41:35 +00:00
1767c08cba
Add a capability for pre/post processing on write/read.
2000-04-14 14:21:55 +00:00
3149043619
Add a driver for the Rio 500 MP3 player.
...
XXX This driver might go away again, since you can do it all with ugen.
XXX But this driver is compatible with the Linux driver so there are
XXX programs for it.
2000-04-14 14:20:02 +00:00
0839e2a0d9
Regen.
2000-04-14 14:15:41 +00:00
471d06cfbc
Rename FUTURE to FTDI.
...
Add the funky little D-Link radio.
2000-04-14 14:14:48 +00:00
017ca78459
Make attach of ugen work as it should so product&vendor locators can be used.
2000-04-14 14:13:56 +00:00
e44f0f1147
Support for SIGIO.
2000-04-14 14:12:47 +00:00
augustss