Commit Graph

26 Commits

Author SHA1 Message Date
pk 4cefebdf8d Fix fall-out from previous change: the map's DMA address is valid only
after bus_dmamap_load().
2001-03-20 15:39:20 +00:00
thorpej 00ddf90164 Use bus_dmamap_load(), not bus_dmamap_load_raw(). 2001-03-08 02:20:39 +00:00
thorpej 372338915a Use splnet() to block network interrupts, not splimp(). 2001-01-14 17:37:41 +00:00
thorpej a64a0f8137 ALTQ'ify. 2000-12-14 07:15:45 +00:00
thorpej b84f740be0 Move bpfattach()/bpfdetach() calls into ether_ifattach()/ether_ifdetach(). 2000-11-15 01:02:11 +00:00
pk 406e0f779f Add a `device class' interrupt level argument (from machine/intr.h)
to bus_interrupt_establish().

It's currently only used in sparc64/dev/psycho.c to assign a CPU interrupt
level to devices in PCI slots.
2000-07-09 20:57:41 +00:00
pk 82dbe14248 No need to specify page alignment; this is automatic. 2000-05-10 14:25:43 +00:00
pk bb1605cff5 Fix bogus `boundary' argument in bus_dmamap_create(). 2000-05-10 14:16:11 +00:00
pk 1bf775b965 Conform bus_dmamem_{alloc,map} usage to bus_dma(9) specs. 2000-05-09 22:42:08 +00:00
thorpej fc96443d15 New callout mechanism with two major improvements over the old
timeout()/untimeout() API:
- Clients supply callout handle storage, thus eliminating problems of
  resource allocation.
- Insertion and removal of callouts is constant time, important as
  this facility is used quite a lot in the kernel.

The old timeout()/untimeout() API has been removed from the kernel.
2000-03-23 07:01:25 +00:00
pk a1b5434cec Make promiscuous mode go again. 2000-02-14 17:06:45 +00:00
thorpej 94b1e4084a Don't dry to diving MIIF_NOISOLATE in the PHY drivers. Instead, pass
flags down from the parent to child vi mii_attach().
2000-02-02 17:46:42 +00:00
thorpej 84dc99fdea Bring some order to the chaos which was the MII code function naming
"conventions".
2000-02-02 08:05:26 +00:00
pk 2afd4d3aec * remove full duplex modes for the internal transceiver
* internal transceiver needs to be reset for the BMSR_LINK bit to
  be even remotely reliable
* because of previous, maintain link state, so we won't be sensing speed
  all the time when interface flags need to be changed (e.g. entering/exiting
  promiscuous mode)
* in auto-speed mode, report link condition changes on the console
1999-12-23 16:39:56 +00:00
pk 7ab5ad7988 Streamline media code a bit by some `pseudo-mii' code designed to handle
the on-board transceiver.
1999-12-22 16:05:12 +00:00
pk f037f3be7e Shuffle some code around to allow two PHYs to attach. Only one PHY can
be used at a time, but it's now possible to select one by using ifconfig(8)'s
`instance' parameter.
1999-12-21 21:07:42 +00:00
pk bbbbfe896e * Remove spurious blockade in the path to get the transceiver status word.
* Make sure to flip the 10baseT/100baseTX bit when doing autoselect.
* Miscellaneous cosmetics.
1999-12-20 22:23:39 +00:00
pk d5a471ccc9 Check presence of Sbus interrupt properties before using them.
Only one case is known to trigger this omission: a Sparc Classic
configured as X terminal.
1999-11-21 15:01:50 +00:00
thorpej 4bdf6bd731 Call mii_down() as appropriate. 1999-11-12 18:14:17 +00:00
thorpej ca9b9a3b2e Adapt to mii_phy_probe() change. 1999-11-04 00:24:00 +00:00
thorpej f98d358a1f Rework layer 2 protocol input routines. Instead of calling e.g. ether_input()
directly, call the function pointer (*if_input)(ifp, m).  The input routine
expects the packet header to be at the head of the packet, and will adjust
as necessary.  Privatize the layer 2 input and output routines, allowing
*_ifattach() to set them up as appropriate.
1999-05-18 23:52:51 +00:00
pk d86e93c62a Fix promiscuous modes - patches from Jason Wright. 1999-03-23 00:27:09 +00:00
pk c6c74098d0 Don't try to use the MII routines for the internal PHY. 1999-02-19 14:57:00 +00:00
pk 2fa7bdbccd Fix AF_NS code. 1999-01-18 13:29:01 +00:00
pk fb846bde24 Share ring buffer code and data structure for `be' and `qe' in
the QEC module. Adapt the QEC interrupt establish code to suit the
needs of the `qe' device.
1999-01-17 20:47:50 +00:00
pk e0e761e420 Import Jason Wright's Bigmac driver, written for OpenBSD.
Heavily pounded on by me to make it fit our driver model.
1999-01-16 12:43:09 +00:00