92e327c226
Match PNP0320 (Japanese 106-key keyboard A01).
...
- We could use this information to determine the default keymap (?)
- Match more keyboards? (e.g.strncmp(idstr, "PNP03", 5))
2001-03-31 09:20:40 +00:00
5f670bebfc
Initialize the entire pmap table before populating it.
...
This addresses pr 7174
Thanks to Christian Limapch for diagnosing the problem.
2001-03-31 09:05:21 +00:00
c13ba16f2b
Fix an uninitialized variable reference in cpu_fork().
...
Reported by Tad Hunt <tad@entrisphere.com>.
2001-03-31 07:50:59 +00:00
41833a3286
comment out device register structure definitions, used for reference only.
...
remove unnecessary BUS_SPACE_MAP_LINEAR when mapping ethernet dma registers.
2001-03-31 06:56:54 +00:00
803c0c7eda
Add driver for AT1720 MCA cards. This uses generic MB86960 support code,
...
and shares some bits with ISA AT1700 driver. Gee, this one was really
easy :)
This card turned out to be quite good performer - I get about 360KB/s
on 386DX PS/2 machine, which is best of all supported cards so far.
2001-03-31 00:43:04 +00:00
2ceebb6c0e
Remove unnecessary test of tp->t_linesw against NULL; they are results
...
of confusion while correcting compilation error after t_line is
replaced with t_linesw.
2001-03-31 00:35:21 +00:00
6b982beac1
Call softintr_init()
2001-03-31 00:10:03 +00:00
3e4cc841a7
Add softintr and ISA bus support
2001-03-31 00:08:34 +00:00
a03b2aaaf0
Reverse previous commit - isa headers don't belong in /usr/include
2001-03-31 00:05:57 +00:00
d3a8b4016e
Add isa_machdep.h and isapnp_machdep.h
2001-03-30 23:59:19 +00:00
0ca4ab64ac
Add ISA serial port device
2001-03-30 23:54:45 +00:00
9641e5d860
Probe ISA bus devices
2001-03-30 23:52:05 +00:00
dd068f675e
Changes to interrupt architecture for softintr support
2001-03-30 23:51:14 +00:00
cdba0ef41c
Add some ISA bus cards
2001-03-30 23:49:37 +00:00
7cf783665e
Please preserve copyright notices modified by Ben Harris since the a.out and
...
ELF structure loadings are of his design from BBBB
2001-03-30 23:49:06 +00:00
1b6e2e02dd
Add files for ISA bus and softintr support
2001-03-30 23:47:58 +00:00
8cd59636b4
Support for ISA expansion slot in Mips 3230
...
The ISA Bus on this machine doesn't support DMA, and all interrupt lines
are wire-OR'ed together. Mileage may vary if sharing interrupts.
Tested cards:
com: 8250 and 16550 UART's (8 bit)
ec: 3com Etherlink II (8 bit)
we: SMC 8013 Ethernet (16 bit) [work in progress]
Probes, ARP in both directions works, sends clean packets,
tcpdump show correct packets on receive, NDP for IPv6 works,
netstat -s shows nothing strange.. but doesn't talk TCP/IP!
2001-03-30 23:45:18 +00:00
7d798b3ef7
Initial ELF kernel loading for RiscPC/A7000/NC based on Ben Harris's work
...
Since arm32 isnt switched to ELF yet its not completely tested; It loads
a kernel but then hangs on symbol table loading; propably a ELF/a.out
symbol table conflict.
Also cleaned up the code a bit
2001-03-30 23:44:58 +00:00
154a3bba69
use MI softintr
2001-03-30 23:28:00 +00:00
5d03735614
Move most interrupt functionality to arch/mipsco/mipsco/interrupt.c
...
Remove old style soft interrupts to favor MI softintr support
2001-03-30 23:26:29 +00:00
09d79c4b1f
New data structures and prototypes for MI softintr support
2001-03-30 23:23:37 +00:00
273d283d25
Implement MI softintr functions (softintr_establish, softintr_schedule etc)
2001-03-30 23:21:30 +00:00
9477a9256c
Re-implement bus_space(9) functions:
...
- Correctly handle striding of data
- Better support for endian neutral access
- Correctly implement _stream variants of bus_space functions that can
byte swap. This reverses the automatic byte swapping done in hardware
for 16 bit ISA bus cards
2001-03-30 23:17:03 +00:00
a22b0cbf4d
Optimize bswap16() and bswap32() functions to inline assembly.
2001-03-30 20:00:05 +00:00
7cd0069dfc
Make this compile without com.
2001-03-30 16:32:02 +00:00
c5496871db
fix comment.
2001-03-30 15:59:17 +00:00
a9a5dcd043
Add yds at pci and children.
...
Alpha and i386 are the only tested ports.
2001-03-30 14:47:48 +00:00
355086c412
The `speed' statistic from the RNG was brought to you by the letter `B' and
...
the letter `S'. I don't think anyone will miss it.
2001-03-30 12:05:02 +00:00
a6a587a71e
Track prototype change to isa_fillw() that avoids passing u_short as an arg.
2001-03-30 11:21:33 +00:00
5ba1d71d33
Don't reference nonexistent register on R96. (and maybe R94 too)
2001-03-30 09:10:48 +00:00
70a7bcb64b
Remove ncr53c9x_dmaselect
2001-03-30 07:49:07 +00:00
cce60f68dc
Added.
2001-03-29 21:07:56 +00:00
d6b50e1598
add fas configuration
2001-03-29 18:54:58 +00:00
6386dedebe
When attached, do not change brightness if the value is zero.
2001-03-29 17:44:50 +00:00
cc5ddb2b20
Make `trace' useful even w/o symbols and add /f option to dump parameters.
2001-03-29 14:58:08 +00:00
fb96b4d88c
Added.
2001-03-29 04:58:52 +00:00
22a64b5a3e
Added.
2001-03-29 04:35:09 +00:00
fbd8636feb
Added.
2001-03-29 04:16:21 +00:00
da500dc6be
Removed some sun3 references.
2001-03-29 04:07:54 +00:00
1c9cc1b092
use NCR_F_DMASELECT instead of ncr53c9x_dmaselect
2001-03-29 03:30:19 +00:00
6095b6e2ff
Added.
2001-03-29 03:24:19 +00:00
0640ad6ace
When the endians are little, they are little.
2001-03-29 03:23:33 +00:00
3eb7866aaa
Added support for the 68010 bus error frame.
2001-03-28 23:08:15 +00:00
a8c0b619da
support umct USB-serial device
2001-03-28 18:45:07 +00:00
676bacb4ea
include "opt_ddb.h" explicitely
2001-03-28 18:03:49 +00:00
7f28cbe9dc
Fix an obvious typo.
2001-03-28 17:33:07 +00:00
fdce371144
objcopy -> ${OBJCOPY}
2001-03-28 17:04:44 +00:00
864a597f2d
Define ${OBJCOPY}.
...
XXX: Should we use ${CROSSDIR} here or not?
2001-03-28 17:03:48 +00:00
2deceb396c
Brought up-to-date with revision 1.124 of the Sun3 pmap.
2001-03-28 14:15:11 +00:00
a8cd6c5401
Added.
2001-03-28 13:47:58 +00:00
minoura