Commit Graph

81732 Commits

Author SHA1 Message Date
jmcneill
92a6d96206 Regen. 2006-06-20 22:37:14 +00:00
jmcneill
93305d7b62 Make resetting the video BIOS in the ACPI wakecode optional. It can be
configured via sysctl machdep.acpi_vbios_reset. Defaults to 1 -- reset vbios
on resume.
2006-06-20 22:36:58 +00:00
drochner
5fea743b13 add license texts (public domain for hw header, minimal BSD for sw)
so that this stuff can be used by others
2006-06-20 20:30:22 +00:00
is
d6a3b8fecd Fix typo in comment 2006-06-20 19:57:32 +00:00
garbled
cb76e8b6d7 Update install WRT recent clock changes, and break INSTALL into INSTALL
and INSTALL_SMALL.  Since floppy images have to fit on one floppy, we
have to really cut down on the drivers on that image, but people
netbooting don't have that problem, so they deserve a more featured
kernel to install with. (namely one with raid support and more ethernet
drivers)
2006-06-20 17:29:07 +00:00
jmcneill
52f7cdcc1f Hook the lid switch, sleep button, and hibernate button into sysmon. This
enables special Fn keys on Sony Vaio laptops.
2006-06-20 15:35:11 +00:00
gdamore
1c8dd20510 Use portable | cat 1>&2 instead of > /dev/stderr. This allows this script
to work, and supports building on Solaris 10.

Reviewed/approved by jlam@.
2006-06-20 15:35:03 +00:00
skrll
86bff00eef Enable installation of ia64 includes - mostly from cherry. 2006-06-20 15:26:19 +00:00
perry
97da3b129c Power hook for ath pci front end.
Written and tested by George Michaelson [ggm at apnic.net]
2006-06-20 14:38:34 +00:00
oki
aab3cbfbad Added saemul_pecoff structure, and (hope) work again w/ pthread. 2006-06-20 14:11:56 +00:00
cube
8b8d583b02 When we consume a resource definition from _PRS, advance to the next one.
Otherwise, if there are two resources definitions of the same type in _CRS,
the same one from _PRS will be used twice, which of course leads to errors.

Note:  _PRS is Possible Resources Set
       _CRS is Current Resources Set

XXX acpi_allocate_resources is still very weak, e.g. it completely ignores
    StartDependentFn entries which are kind of a switch.  But at least it's
    slightly better that way.

Tested by jmcneill@.
2006-06-20 12:31:19 +00:00
tron
a0d2802c69 Make this compile again. 2006-06-20 09:17:14 +00:00
garbled
1efe96e909 Basic prep timecounter support. This greatly increases the stability of
ntp on my 7248, however, my 7043-140 is still a bit flaky.  I suspect the
only way to fix the 7043 is going to be writing a timecounter driver for
the 8254 present on these machines.  Either way, this makes some of the
machines better, and the other machines are still about the same as they
were before, so it's a net gain for the port.
2006-06-20 05:49:09 +00:00
jdc
4e27372d03 Add support to the 2nd stage boot loader for booting from RAID
partitions.  We do this by checking the NetBSD label to see if the
boot partition is of type RAID.  If so, we offset reads from the
disk so that the kernel image can be read.

Note that with this code, sun4 machines (with PROM monitor) will only
boot from RAID if the RAID partition is the first one on the disk.

Tested on a SPARCstation 20, a SPARCstation 2 and a 4/330.
2006-06-20 05:41:59 +00:00
christos
18b73e414c Don't allocate too much stuff on the stack. 2006-06-20 03:22:12 +00:00
christos
e6ea8fe642 Don't allocate too much stuff on the stack 2006-06-20 03:21:30 +00:00
christos
709b2e6f55 don't allocate too much stuff on the stack. 2006-06-20 03:20:44 +00:00
christos
8dc1cf5155 PR/33445: Brian Buhrow: Fix a number of problems with the pdcsata driver:
> The driver for the family of Promise SATA controllers,
> /usr/src/sys/dev/pci/pdcsata.c is not very robust when it comes to handling
> transient drive errors, or interrupt hickups when the card is under load.
> Worse, my experience seems to indicate, and the Linux driver confirms,
> that these cards tend to fall over rather frequently during high load
> operations or if drives unexpectedly reset or go to sleep.  Symptoms
> include interupt timeouts during heavy load, the inability to reset drives
> if they go to sleep, and a failure of the card to generate interrupts at
> all if the interrupt load gets too high.
2006-06-20 02:39:58 +00:00
jmcneill
1404a243f2 Add powerhook for wm(4), from George Michaelson <ggm AT apnic DOT net> 2006-06-20 01:16:23 +00:00
gdamore
d106438030 Make include of opt_bluetooth.h unconditional. 2006-06-19 22:38:55 +00:00
christos
89826912b8 Add another rogue card. 2006-06-19 21:53:57 +00:00
rpaulo
6c7e5e5535 Enable altq for macppc. 2006-06-19 21:36:56 +00:00
rpaulo
700760bd47 Add ALTQ_PRIQ. 2006-06-19 20:40:48 +00:00
gdamore
abf73663d1 Regen pcmciadevs. Sorry. 2006-06-19 16:44:24 +00:00
gdamore
a5c89047c0 Initial import of bluetooth stack on behalf of Iain Hibbert. (plunky@,
NetBSD Foundation Membership still pending.)  This stack was written by
Iain under sponsorship from Itronix Inc.

The stack includes support for rfcomm networking (networking via your
bluetooth enabled cell phone), hid devices (keyboards/mice), and headsets.

Drivers for both PCMCIA and USB bluetooth controllers are included.
2006-06-19 15:44:33 +00:00
jmcneill
052a8ad2ad Restore PCI configuration space on resume. 2006-06-19 13:56:29 +00:00
jmcneill
3e47be4df9 Restore yds(4) state on resume. 2006-06-19 13:55:40 +00:00
jmcneill
bd22603476 Halt input/output on soft suspend if currently running, and restore them
on soft resume.
2006-06-19 10:19:08 +00:00
jmcneill
a3f69214b6 acpi_pci_fixup didn't work as well as I had hoped; don't bother for now. 2006-06-19 10:18:08 +00:00
jmcneill
3c27eb63b5 cube@ says that acpi_pci_fixup() only writes in devices interrupt line
registers, so restore the PCI-ISA bridge IRQ routing here again.
2006-06-19 10:08:16 +00:00
hannken
835f09ae96 db_stack_trace_print(): Enable backtrace with pid argument.
Approved by: Martin Husemann <martin@netbsd.org>
2006-06-19 08:44:45 +00:00
jmcneill
6df1267b6f Enable interrupts in the error path also. 2006-06-19 02:33:19 +00:00
jmcneill
3aa64055a0 Fixup PCI interrupt routing using ACPI tables on return from S3 sleep.
Requires options PCI_INTR_FIXUP in your kernel.
2006-06-19 02:32:12 +00:00
jmcneill
dda9d480db Don't try to fixup PCI interrupt routing here; we're going to use ACPI to
do this for us instead. This prevents us from having to write chipset
specific support -- yay!
2006-06-19 02:30:35 +00:00
chap
2c3d85cc29 Not related to chap-midi branch; corrects two compilation errors induced
by a stack-police commit to the HEAD.  (Is this why so many comments about
catching up with -current say "here we go again"?)
2006-06-18 23:15:33 +00:00
christos
1c541a0edd Regen 2006-06-18 21:32:50 +00:00
christos
8b28dc1494 PR/33761: dieter roelants: NetBSD doesn't recognize a RealTek 8168B nic 2006-06-18 21:32:24 +00:00
christos
fcad4273ae PR/33763: dieter roelants: Realtek 8168B doesn't function. Don't align
for i386/x86_64. From FreeBSD.
2006-06-18 21:29:48 +00:00
uwe
bf745482a4 Hide struct bintime and pertinent inline functions under #ifdenf _KERNEL.
This code is not intended to be visible by the userland anyway, and it
also triggers a bug in SPARC's gcc 3.3.* that causes bootxx to explode
beyond its size limit (gcc emits unused reference to __muldi3).
2006-06-18 21:09:24 +00:00
uwe
59d7f20391 Do not instal net/if_pppvar.h, net/if_slvar.h and net/if_stripvar.h.
The former two are no longer necessary as slstats is no more
and pppstats now uses an ioctl instead of rummaging through kmem.
The latter has nothign interesting for the userland, but uses
struct bintime that I'm about to hide under #ifdef _KERNEL.

A bunch of remaining <net/if_*.h> headers is pretty useless to the
userland too, but ... someone else's yag to shave...
2006-06-18 21:02:16 +00:00
christos
097de97608 reset kbc as the comment said. from joerg. 2006-06-18 20:53:10 +00:00
scw
301e60300b Pull in <string.h> if !_KERNEL, otherwise gcc4 complains about no
prototype for memset(3) (in AUDIO_INITINFO()).
2006-06-18 20:45:09 +00:00
nonaka
3b9b5a75bb Added 'Low Voltage Intel Pentium M processor 1.30 GHz' entry. 2006-06-18 16:39:56 +00:00
rpaulo
656f536d09 Use IFQ_IS_EMPTY(). 2006-06-18 16:14:10 +00:00
rpaulo
7a69791e70 Remove IF_PREPEND() to comply with altq. I think the logic is safe to just
remove the macro call.
2006-06-18 15:44:49 +00:00
rpaulo
c545be67e3 When calling IF_DEQUEUE() check if the dequeued mbuf is NULL to comply
with altq.
2006-06-18 15:37:27 +00:00
xtraeme
0b27695a68 Fix AMD 766 PMC entry. 2006-06-18 10:34:34 +00:00
xtraeme
84989a2fad regen 2006-06-18 10:33:42 +00:00
xtraeme
06684d3b32 Add ALI M1533 PCI-ISA Bridge 2006-06-18 10:33:12 +00:00
xtraeme
9552b18ed1 Match the following products:
* SIS 962 and SIS 963
* AMD 766 and AMD 768
* ALI M1533

... syncing the code with openbsd.
2006-06-18 09:57:37 +00:00