uch
bbb8c56fcb
add PCI_MAPREG_PPB_END (PCI-PCI bridge) PCI_MAPREG_PCB_END (PCI-Cardbus bridge)
2000-04-28 17:12:45 +00:00
soren
99e6adf31e
Adapt to cpu_intr() change.
2000-04-28 15:55:51 +00:00
ad
db06ac868b
Attach cac* and ca*.
2000-04-28 13:51:56 +00:00
ad
8f9b06a9e6
- Enable ca(4) device.
...
- Fix a couple of nits.
2000-04-28 13:50:25 +00:00
ad
ab2d7be096
Add missing cdevsw and chrtoblktbl entries.
2000-04-28 13:28:42 +00:00
simonb
3c359c262d
The size of the members of struct ultrix_utsname were nothing like
...
reality - adjust and fill in "version" the same way that some other
compat routines do. An Ultrix "uname -a" returns something meaninful
now instead of just "NetBSD ".
2000-04-28 12:52:52 +00:00
augustss
308fa27a0d
Unmute some mixer controls by default. From OpenBSD.
2000-04-28 12:39:59 +00:00
jdolecek
520f9dc581
pasfind(): avoid silly bug - if bus_space_map() of SB I/O space failed,
...
we used bad label and tried to bus_space_unmap() invalid memory
region
Fixes port-i386/9992 by Jarkko Teppo <jate@uwasa.fi>.
2000-04-28 08:51:42 +00:00
shin
e3d2f0ae85
delete obsolete 'options MIPS_16K_PAGE'.
2000-04-28 07:19:33 +00:00
thorpej
0b3af10371
Keep track of current power state (resumed, standing by, suspended), and
...
only perform standby/suspend/resume actions if the state actually changes.
Inspired by some similar code in the USB code, pulled into here so that
the workaround isn't needed in every driver.
2000-04-28 04:48:51 +00:00
tsutsui
61e3f39169
Fix copyright notice as per request from the author.
2000-04-28 03:48:56 +00:00
matt
70d4422b8a
Dump NRCV to 8 from 5. Note that a 8K NFS reply takes 6 full size
...
Ethernet packets so the chances are that if the server was fast enough
this driver would continuously lose one of the fragments. Eventually
causing the kernel load to fail. Add 2 extra for random ARP or other
packets that might be picked up.
2000-04-28 00:08:51 +00:00
is
e6f57d38e4
Fix thinko in fix for fix for cf_unit abuse.
2000-04-27 21:11:07 +00:00
uch
e14885d915
fix comment.
2000-04-27 19:38:23 +00:00
bouyer
fcf693203f
More big-endian fixes from Izumi Tsutsui.
2000-04-27 16:49:07 +00:00
itojun
57434b944b
misuse of free(ia) in #if 0'ed region.
...
From: Lennart Augustsson <lennart@augustsson.net>
2000-04-27 16:44:19 +00:00
thorpej
a8b12af644
- When we get an ABOUT_TO_CHANGE event, send an OK message in response
...
so that the docking/undocking process can actually complete.
- Track the current docking state, and report the current state when it
changes.
- Make it possible to enable pnpbios verbosity at run-time.
2000-04-27 16:41:59 +00:00
itojun
7e72267252
correct in6_ifdetach(). free oia, not ia.
...
From: Lennart Augustsson <augustss@augustsson.net>
2000-04-27 15:39:05 +00:00
augustss
30c20f930f
Change my email address.
2000-04-27 15:26:44 +00:00
augustss
91878e8679
Reorder some #defines.
2000-04-27 15:25:36 +00:00
bouyer
fe54b787dc
Add NetBSD RCS Id and copyrigth notice.
2000-04-27 14:08:09 +00:00
bouyer
bf7a94ec2b
Fix copyrigth notice.
2000-04-27 14:06:57 +00:00
bouyer
2fb93595b2
Note siop changes.
2000-04-27 12:48:59 +00:00
soren
88bf41a16e
Use siop(4).
2000-04-27 10:52:43 +00:00
oster
db11351ced
Make sure the config structure allocated during autoconfiguration actually
...
gets initialized properly. Should fix PR#9816.
2000-04-27 00:57:48 +00:00
itojun
b360c656a0
temporary workaround against GIF NUD issue (when you configure globals
...
onto GIF, NUD prevents packet from going out)
KAME PR 245. From: Andreas Wrede <andreas@planix.com>
2000-04-27 00:33:47 +00:00
thorpej
43db473cbb
Clean up the docking-event related message, and make it possible to
...
debug docking events without having to debug the rest of PNPBIOS.
2000-04-26 20:33:46 +00:00
bouyer
ce7f4dafe1
Big-endian fixes from Izumi Tsutsui.
2000-04-26 20:00:31 +00:00
thorpej
ef25b7769e
Regen.
2000-04-26 17:30:59 +00:00
thorpej
0defe75e76
Add product ID for the PLX Technology 9060ES PCI bus controller. Note this
...
ID isn't normally seen, as just about every device with a PLX on it loads
a different ID from an EEPROM, but there's no harm in documenting it.
2000-04-26 17:30:35 +00:00
ad
d5d441a516
- Bump xfer size limit to the maximum allowable.
...
- 20 CCBs is enough to maintain a constantly stuffed inbound FIFO.
2000-04-26 15:58:01 +00:00
ad
75bb77ed56
- Rearrange some spl*() calls to be as intended.
...
- Scan cac_cd in cac_shutdown(), don't use a SIMPLEQ.
2000-04-26 15:54:02 +00:00
tsutsui
b4f524c223
- Allocate mbuf dynamically on Tx and use bus_dmamap_load_mbuf(9).
...
- Call bus_dmamap_sync(9) as appropriate.
- Leave only register declarations in rtl81x9reg.h and
split other stuff into rtl81x9var.h.
bus_dma(9) code mostly taken from thorpej's if_rtp.c.
2000-04-26 14:02:34 +00:00
bouyer
4e9473a1e7
ifa_ifwithnet(): for the netatalk case, don't blindly return the first match
...
but try to find a exact match first. Closes kern/9957.
2000-04-26 13:38:13 +00:00
itojun
3075a916cc
sync with more recent kame. defer inclusion of net/if_gif.h.
2000-04-26 05:36:41 +00:00
mhitch
7d9369f3d3
Fix callout change for keyboard repeat. The callout structure was
...
incorrectly added as a union member which overlaid the keyboard
state structure. Fixed by moving the callout structure into to
keyboard state structure.
2000-04-26 04:16:17 +00:00
thorpej
8b8597dae0
Recognize the Crystal CS4297A codec, and add a couple of macros
...
to manipulate AC97 codec IDs.
2000-04-26 00:00:41 +00:00
bouyer
eba93ce7d2
Ops, need to restore correct DSA value after a phase mismatch, we may have
...
been interrupted during a S/G operation.
2000-04-25 20:02:33 +00:00
bouyer
88be4752d0
- Change the script to start new commands in an asyncronous way, using
...
'command slots' in which the host can put command and wait for the script
to start them
- Change siop.c to do full disconnect/reslelect, allowing as much as one
command per target/lun to run in parallel.
- Fix bug in registers init where a board without BIOS would end at
ID 0 (now the driver works on alpha too).
- better handling of messages, sending back a MSG_EXT_SDTR in response to an
incoming MSG_EXT_SDTR, and MSG_MESSAGE_REJECT for unhandled messages.
- fix use of bus_dmamap_sync() and htole32().
- supports shared interrups
- change some int8 and int16 to int, for alpha and mips benefits ( suggested by
Toru Nishimura)
2000-04-25 16:27:05 +00:00
tsubai
151b83e2e1
Add ex* at pci and rtk* at pci.
2000-04-25 16:05:06 +00:00
bouyer
5ee6872b46
- Add support for NOP instruction
...
- fix dsp value for second operand of memory move, so that patch list will be
correct.
2000-04-25 16:01:16 +00:00
mrg
dab52c26ad
- add a note about streaming buffers and US IIi not having them.
...
- make some debugging messages in iommu_remove() saner and add some more.
- decrement 'len' in the no streaming buffer case, also.
- in iommu_dvmamem_map(), do not enter these mappings into the IOMMU,
only into the CPU (the former is done at _load time).
- make a panic that shouldn't happen a DIAGNOSTIC.
2000-04-25 14:59:38 +00:00
augustss
df70862e8c
Insert (very conservative!) bus_space_barrier() calls at all register accesses.
...
The bus_space(9) man page says you've gotta have them...
2000-04-25 14:28:13 +00:00
tsutsui
6369b56c99
Fix two endian problems. rtk now works on macppc.
...
- Use le32toh() on reading rxstat from the Rx DMA buffer.
- rl_read_eeprom() should return EEPROM values in little endian
when caller requires byte-stream data.
bus_dma(9) fixes are still on-going.
XXX rtk on macppc seems to make tons of CRC errors...
XXX Does it work fine on i386 or others?
2000-04-25 14:16:46 +00:00
tsubai
1be338dabc
GC VM_MBUF_SIZE.
2000-04-25 12:31:10 +00:00
tsubai
63fca4fecb
Use P1SEG to map pool pages.
2000-04-25 12:17:06 +00:00
augustss
74beeca710
Move the size of the mapped bus_space region into the bus independent softc.
2000-04-25 09:20:54 +00:00
uch
f49b235cc0
remove COMPAT_386BSD_MBRPART
...
remove COMAPT_13, COMPAT_14. hpcmips appears NetBSD 1.5.
2000-04-25 06:20:14 +00:00
itojun
7d20d62f25
ipip is needs-count, not needs-flags. evidence: manpage and all
...
sys/arch/*/conf/GENERIC has count.
2000-04-25 06:08:31 +00:00
matt
1fe20bbb39
be a bit more defensive in the probe routines. only allow one attachment.
2000-04-24 21:59:22 +00:00
matt
d32950cb7e
Add cd9660 support to the secondary boot blocks.
2000-04-24 21:46:07 +00:00
perseant
4ea5a53003
get rid of unused variable aflags
2000-04-24 19:07:16 +00:00
augustss
aae26d0d0c
Move a test if the MIDI is open outside a loop in the interrupt routine.
...
Some stylistic changes.
2000-04-24 17:55:24 +00:00
thorpej
23694b5ab3
Glue in uvm_pageidlezero(). While here, improve some panic messages
...
in pmap.c, as requested by Jonathan Stone.
2000-04-24 17:18:16 +00:00
thorpej
9ec517a68e
Changes necessary to implement pre-zero'ing of pages in the idle loop:
...
- Make page free lists have two actual queues: known-zero pages and
pages with unknown contents.
- Implement uvm_pageidlezero(). This function attempts to zero up to
the target number of pages until the target has been reached (currently
target is `all free pages') or until whichqs becomes non-zero (indicating
that a process is ready to run).
- Define a new hook for the pmap module for pre-zero'ing pages. This is
used to zero the pages using uncached access. This allows us to zero
as many pages as we want without polluting the cache.
In order to use this feature, each platform must add the appropropriate
glue in their idle loop.
2000-04-24 17:12:00 +00:00
matt
b7de2c5900
Add lcgreg.h.
2000-04-24 17:09:56 +00:00
matt
7964d80339
Initial definition of registers for VS400 LCG cards. Still needs more.
2000-04-24 17:09:03 +00:00
tsutsui
6f9392b42a
Merge changes of sys/pci/if_rl.c rev. 1.8->1.10. (from kern/9870)
...
Also remove unused pbase, vbase and PCI_CAP_PWRMGMT declarations.
2000-04-24 15:25:00 +00:00
ragge
c6a9a48f2e
Add 4000/90 to the countdown hack.
2000-04-24 14:45:30 +00:00
uch
6d1291a469
code clean up.
2000-04-24 13:02:13 +00:00
uch
814e39b9e3
add COMPAT_386BSD_MBRPART
2000-04-24 12:59:43 +00:00
uch
3be17707f3
remove #ifdef alpha
2000-04-24 12:58:32 +00:00
tsubai
88a555948c
Sync with current i386 pmap.c.
2000-04-24 08:40:21 +00:00
mhitch
62c210a97b
Fix bootblock countdown for 4000/VLC.
2000-04-24 07:03:27 +00:00
augustss
4d0217d2c1
Remove item.
2000-04-23 23:21:32 +00:00
augustss
007a7dbfd8
Update with new files.
2000-04-23 23:19:36 +00:00
perseant
eedb742e6e
Fix problems outlined in PR#9926:
...
- lfs_truncate extends the file if called with length > i_ffs_size;
- lfs_truncate errors out if called with length < 0;
- lfs_balloc block accounting corrected for the case of blocks read
into the cache before they exist on disk;
- mp->mnt_stat.f_iosize is initialized in lfs_mountfs.
2000-04-23 21:10:26 +00:00
matt
9148a41e81
fix booted_qe case to compare locators against controllers.
2000-04-23 20:30:37 +00:00
tsarna
da1f2723c4
Addredd port-i386/9897, but differently. Since the effect of resetting
...
the video mode on machines with ancient or no video cards is not clear,
for safety's sake a I created a new biosboot variant, biosboot_resetvideo
that does the call.
Anyway, now I can boot my i-opener without hitting Tab. Thanks Andrew!
2000-04-23 19:57:12 +00:00
mhitch
437d090c28
Long term bug finally reared its head: size of device softc was specified
...
as sizeof(struct device) when amiga switched to new config, and recent
additions of callout structures and a long missing struct device to the
soft structure resulted in kernel panics when attempting to open the builtin
serial port. The callout structure initialization was clearing the serial
port softc data! Fixed by using sizeof(struct par_softc).
2000-04-23 19:55:51 +00:00
augustss
0e5c7f55af
Regen.
2000-04-23 19:35:35 +00:00
augustss
23f3c0074f
Sync with FreeBSD: add two more adapters.
2000-04-23 19:03:45 +00:00
thorpej
bfced25d78
Update with reality.
2000-04-23 17:51:21 +00:00
thorpej
d0271b127d
Add PNPBIOS front-end for the PC Floppy Controller driver.
2000-04-23 17:50:00 +00:00
thorpej
0cde36f780
Carve off the ISA configuration bits from the floppy driver. Driver is
...
still ISA-specific, but we can attach ISA instances with different
configuration mechanisms now.
2000-04-23 16:47:45 +00:00
matt
c10673838a
Extend asc driver to include support for the VS400/9x.
...
Add VS4000/9x support vsbus_dma.c
2000-04-23 16:38:52 +00:00
takemura
6d972981ff
Support 8bpp mode on MC/R530.
2000-04-23 10:20:50 +00:00
minoura
dfb848e298
M680x0 are now defopt'ed.
2000-04-23 05:49:14 +00:00
minoura
13fc4ebbe1
Do not include opt_m680x0 in LKM.
2000-04-23 05:38:31 +00:00
augustss
b12ed6c03b
Make it possible to move a device to its unconfigured state by
...
using config #0 .
2000-04-23 00:46:59 +00:00
augustss
bc5e86601e
Add an item.
2000-04-22 22:52:15 +00:00
augustss
3a27942ba8
Add a clarifying comment.
2000-04-22 22:50:44 +00:00
jdolecek
40d9f8a709
msdosfs_read(): avoid integer overflow for files > 2GB, when
...
difference between current read position and file size
is bigger than 2GB
This fixes problem first noted in FreeBSD PR#15639 and sent
by Martin J. Laubach in kern/9046, though the implementation
differs a bit.
2000-04-22 22:45:37 +00:00
thorpej
8ec60a189f
Make sure the payload is aligned when using E2-over-802.11 encapsulation,
...
as enabled by the LINK0 flag. Fixes PR kern/9700.
2000-04-22 22:36:14 +00:00
eeh
5099c60132
If we trap due to a bad kernel stack, try to switch to the interrupt strack
...
before breaking into the debugger.
2000-04-22 22:06:06 +00:00
matt
25d6f027de
Detect controller number on boot_qe check.
2000-04-22 21:40:40 +00:00
groo
3a77b18fd7
name change; rl -> rtk. Still commented out.
2000-04-22 21:03:27 +00:00
ragge
8b94e15772
Fix boot block countdown on 4000/60. Easy to add for other 4000 machines also.
2000-04-22 20:29:58 +00:00
ragge
a47bd10baa
Use RAISEIPL on all workstations.
2000-04-22 18:11:27 +00:00
augustss
5ea1af4bf4
Regen.
2000-04-22 18:07:19 +00:00
augustss
f468f877de
Add some CMedia audio devices. From T.SHIOZAKI <AoiMoe@imou.to>
2000-04-22 17:32:02 +00:00
mrg
1013298c2a
whole bunch of changes:
...
- merge IOMMU DVMA code from sbus/psycho into iommu.c. this code was
identical and a few minor inconsistencies had crept in. this way
keeps them all in sync.
- with this code gone from psycho, merge the psycho.c and psycho_bus.c
files. same with ebus/ebus_bus.c. delete the _bus.c files.
- add a _ds_boundary member to the dma segment structure, so that later
dma mappings can find this value.
- set _ds_boundary in machdep.c:_bus_dmamem_alloc().
- kill much dead code.
2000-04-22 17:05:59 +00:00
ragge
3a90b3236e
Forgot a protection #define.
...
Make use of raise-spl.
2000-04-22 17:05:07 +00:00
ragge
8c7cf8f008
Add device switch entry for RL disks. Only uses rom to boot so far.
2000-04-22 16:52:23 +00:00
ragge
cab5a24c60
Recognize RL02 as boot device.
2000-04-22 16:50:44 +00:00
ragge
9b8f75bee1
Add "rl" disk.
2000-04-22 16:48:53 +00:00
ragge
11379e0ab6
Add the famous "rl" disk.
2000-04-22 16:46:45 +00:00
ragge
cbf7514ca6
Detect "rl" as root device.
2000-04-22 16:43:47 +00:00
mrg
db956d0701
s#\b#\n# so an error message appears correctly.
2000-04-22 16:42:25 +00:00
thorpej
bedbdf87a4
rl -> rtk
2000-04-22 16:28:48 +00:00
uch
298fbbd162
fix VP3_CFG_INTR_MASK
2000-04-22 15:00:41 +00:00
tsutsui
5f992b6d2b
Rename rl -> rtk.
2000-04-22 13:13:21 +00:00
mrg
5aa4575432
- convert to DPRINTF() style debug messages.
...
- kill dead code.
- use the sbus dv_xname to construct a dvma map map, to pass to
extent_alloc(), to help support multiple sbusses
2000-04-22 12:36:29 +00:00
mrg
6e576e3c03
clean up mdallocsys().
2000-04-22 12:03:33 +00:00
ragge
dd22df3dc8
Ops, forgot to commit this.
2000-04-22 08:19:49 +00:00
groo
7c6a2dcd6d
name change; rl -> rtk
2000-04-22 06:56:20 +00:00
thorpej
cf0a940b9f
Add a pnpbios front-end to the pckbc driver. This is a littke wonky
...
yet.. the keyboard controller actually has 2 PNPBIOS nodes (one to
represent the controller I/O resources and the kbd port IRQ, and one
for the aux port IRQ). To cope with this, we're attaching two instances
of the driver and forge on ahead once both nodes have been seen.
If someone has a better way, please feel free to step forward.
2000-04-22 06:41:34 +00:00
thorpej
1842a5ee3a
Allow pnpbios_getirqnum() to return the share type, as well.
2000-04-22 06:38:24 +00:00
augustss
84f24d3c29
The D-link serial adapter lies about being self powered. It's obviously
...
bus powered. How can we do power budgeting when the devices lie?
2000-04-21 21:02:44 +00:00
augustss
60bb0d050d
Add some comments.
2000-04-21 20:58:56 +00:00
explorer
d592132506
the status register is _always_ at 0x420 -- grr. How should I put this in the config file rather than hard-coded?
2000-04-21 20:13:41 +00:00
augustss
46fb8de93a
Use a 255 ms interrupt interval even if the descriptor in the hub asks
...
for something else, because the spec says that it should be 255.
2000-04-21 19:51:43 +00:00
augustss
6bc85d9fa0
Minor nit: Use another TAB in formatting to make the columns straight.
2000-04-21 19:49:59 +00:00
ragge
171d9f6a3f
First version of keep-track-of-used-devices file.
2000-04-21 19:05:43 +00:00
augustss
4379f92630
Make sure to read the full hub descriptor (including the deprecated field).
2000-04-21 18:57:40 +00:00
thorpej
8c5710a861
- Declare biosbasemem and biosextmem in <machine/cpu.h>, don't extern
...
them everywhere they're used.
- Avoid integer overflow when converting bios{base,ext}mem (in units of
kilobytes) to bytes.
2000-04-21 18:37:20 +00:00
bouyer
19ada4a82a
Snapshot of work in progress: new driver for the NCR 53c8xx SCSI controller
...
(the name 'siop' is still being discussed, may change).
Only basic disconnect/reselect for now, no sync/wide negotiation.
Tested with 810A, 875 and 895 on i386 only.
The bus-independant part should also be able to handle the 53c720 and 53c770.
A new driver with enhanced script should appear for the 825/875/895 'soon'.
2000-04-21 17:56:58 +00:00
explorer
79f12736c0
Add (commented out) addcom0 and com* at addcom?
2000-04-21 17:52:06 +00:00
bouyer
cd5411b382
Script assembler for the NCR 53c7xx/8xx scsi controller. Initial work
...
done by Michael L. Hitch, support for the 8xx and some improvements
by me.
2000-04-21 17:50:07 +00:00
explorer
1118b3ee75
Add driver for Addonics FlexPort 8S (and probably 4S, but not tested)
2000-04-21 17:48:30 +00:00
bouyer
f1d93978ae
Rename define 'siop' to 'msiop' to avoid clash with machine-indepndant siop
...
driver. Doesn't change the name of drivers in config files.
2000-04-21 16:53:20 +00:00
bouyer
2ce6bd4b28
Rename the 'siop' define to 'asiop', to avoid clash with the MI siop driver.
...
This doesn't change the name of the drivers in config files.
2000-04-21 16:51:36 +00:00
minoura
48145d0463
Regen.
2000-04-21 16:18:54 +00:00
minoura
58c5fb660b
We have now native issetugid.
2000-04-21 16:18:16 +00:00
minoura
d982197440
Regen.
2000-04-21 16:16:15 +00:00
minoura
f6051edef5
Add native issetugid() call.
...
Implementation from compat/freebsd.
2000-04-21 16:15:39 +00:00
augustss
3d9d091685
Change the exact sequence of commands when a hub is attached to follow
...
Windoze more closely. This makes more devices work.
After two years of doing USB work I've finally access to a USB protocol
analyzer. Which means I should be able to mimic what Windoze does in
certain cases instead of just following the specs. Following the specs
is not enough since the devices often don't.
2000-04-21 16:05:50 +00:00
augustss
878deae672
Add a define for some slack port power up time.
2000-04-21 16:01:31 +00:00
augustss
9fb474fcf0
Regen.
2000-04-21 15:59:43 +00:00
augustss
f791a72b9c
Change error reporting in port reset function.
2000-04-21 15:58:55 +00:00
augustss
3f08804668
Pretend we know how to turn on port power (it's always on).
2000-04-21 15:40:01 +00:00
augustss
fdeba432d2
Add a comment about a non-obvious use of a #define.
2000-04-21 15:38:55 +00:00
augustss
d744db2ea9
Add D-link serial adapter (made by someone else :).
2000-04-21 15:37:50 +00:00
matt
f52bc62c39
enable in-kernel NTP (so xntpd doesn't die).
2000-04-21 15:16:39 +00:00
shin
a332af2846
delete unused function mips3_TLBReadVPS().
...
reorder insns to avoid mtc0/mfc0 hazard (for VR4100/R4700/RM52xx).
save/restore PageMask in mips3_TLBRead().
2000-04-21 14:14:55 +00:00
shin
e2711a6552
make it compile with -DDEBUG.
2000-04-21 14:10:39 +00:00
tsubai
e27d574b01
Make this compile.
2000-04-21 13:35:27 +00:00
tsubai
14219ebd05
Use dev/ic/com.c.
2000-04-21 07:12:53 +00:00
nisimura
79733cb614
Effort to have consistent comments, fixing one error.
2000-04-21 02:45:01 +00:00
itojun
eaeb53372e
update comment (analysis on 04 draft)
2000-04-21 02:40:53 +00:00
nisimura
3d5a5b03f5
- Address PR#9907. u_pte[1] wired down is left not global sometimes.
...
The brokenness is revealed sporadorically by memory usage on runtime.
- Avoid Vr4100 incompatibilty by making sure to retain default pgMask
value for TLB invalidation routines.
2000-04-21 02:39:55 +00:00
augustss
e1950d4ffa
regen.
2000-04-20 23:40:27 +00:00
augustss
3e4e60beeb
Add Zip 250.
2000-04-20 23:39:50 +00:00
mhitch
ac3bfd5e7f
When the tty intialization was split out of rcons_init(), the call to
...
rcons_ttyinit() was never added to the pmax rasterconsole stuff. Output
to the display using /dev/console has not been working since then. Adding
the call to rcons_ttyinit() makes this work again.
2000-04-20 20:02:34 +00:00
ragge
73e5b4e878
Raise IPL after interrupt, for LANCE chip.
2000-04-20 18:55:50 +00:00
thorpej
13c39a5cb6
Put the rasops attributes in conf/files so that everyone can run
...
config(8) without pulling in files.rasops. There is prior art for
this, e.g. audio.
2000-04-20 18:23:37 +00:00
msaitoh
e61941261f
remove a debug log
2000-04-20 14:04:04 +00:00
msaitoh
25f1ebacc1
add a copyfault routine into the TLB miss handler
2000-04-20 14:02:41 +00:00
pk
43cdacc18b
ctx_alloc: set context before flushing a stolen context's cache
2000-04-20 13:59:02 +00:00
msaitoh
48c1343230
asm bcopy() for sh3
2000-04-20 13:52:35 +00:00
tsubai
8bd19349a1
Fill paa_busname field in pcmciabus_attach_args.
2000-04-20 11:51:27 +00:00
nathanw
3e49436f9d
Replace rcons console code with rasops console code.
...
Console text should now be supported on all TGA cards;
8- and 32-bit TGA and 8-bit TGA2 have been tested.
Implement accelerated character drawing, scrolling, and clearing.
Stop clearing "odd" in VHCR; it's unnecessary and hurts performance.
Use bus_space_vaddr() instead of a local hack.
2000-04-20 05:25:20 +00:00
enami
c63f06acd3
IN_MULTICAST() takes in_addr.s_addr as argument, not pointer to it.
2000-04-20 01:59:22 +00:00
thorpej
c6fa58a322
- Allocate the ktrace operation header on the stack rather than using
...
MALLOC()/FREE().
- In ktrgenio():
- Don't allocate the entire size of the I/O for the temporary
buffer used to write the data to the trace file. Instead,
do it in page-sized chunks.
- As in uiomove(), preempt the process if we are hogging the CPU.
- If writing to the trace file errors, abort rather than continuing
to loop through the buffer.
From Artur Grabowski <art@stacken.kth.se>, with some additional cleanup
by me.
2000-04-19 19:14:17 +00:00
augustss
173c535a95
Add one, remove some.
2000-04-19 16:17:45 +00:00
tsubai
baa659b825
#include <machine/conf.h>.
2000-04-19 15:56:27 +00:00
itojun
79e89da473
change copyright notice from 3-clause TNF -> 4-clause TNF.
...
not sure if which we prefer, but the point is to use exactly the same
copyright. From: matthew green <mrg@eterna.com.au>
2000-04-19 15:16:02 +00:00
tsubai
c88cf26926
Sync with evbsh3.
2000-04-19 14:31:48 +00:00
haya
784977f319
Changes the name of RealTek driver. The new name is `rtk'. This used
...
to be called `rl' and it conflict with RL vax disks, canonical and
historical unix driver name.
This changes are minimal: it only changes the name of RealTek driver.
The filename of source code and a lot of the letter `rl' in source
files should be changed shortly.
2000-04-19 08:44:31 +00:00
pk
e5ab0feccc
Have prom_cngetc() wait until input has been typed.
2000-04-19 08:15:06 +00:00
bouyer
5803932005
Regen
2000-04-19 07:52:33 +00:00
bouyer
01beba012a
Add some Symbios devices.
2000-04-19 07:51:20 +00:00
itojun
5393e61dd0
add boundary check for nd6_ifinfo (otherwise ndp -i can make out-of-bound
...
accesses).
2000-04-19 07:13:03 +00:00
itojun
3be41bae18
add stf pseudo interface (commented out due to possible security risks)
2000-04-19 06:50:27 +00:00
itojun
d300ce3942
add net/if_stf.h and netinet/ip_encap.h (almost noone will include them though)
2000-04-19 06:39:15 +00:00
itojun
3909133548
introduce sys/netinet/ip_encap.c, to dispatch inbound packets
...
to protocol handlers, based on src/dst (for ip proto #4/41).
see comment in ip_encap.c for details of the problem we have.
there are too many protocol specs for ip proto #4/41.
backward compatibility with MROUTING case is now provided in ip_encap.c.
fix ipip to work with gif (using ip_encap.c). sorry for breakage.
gif now uses ip_encap.c.
introduce stf pseudo interface (implements 6to4, another IPv6-over-IPv4 code
with ip proto #41 ).
2000-04-19 06:30:51 +00:00
enami
a2bf544200
Allocate the variable `inqbuf' in scsi_probedev on stack rather than
...
statically. Since this function may called for another luns immediately,
allocating it statically doesn't make sense and may cause race condition
as pointed out by PR#9749.
2000-04-19 04:49:50 +00:00
itojun
5e5941eda1
remove extra memory region kept by "struct pfil_head pfil_head_t;".
...
it seems totally, unnecessary, or seems to be typo for typedef.
(correct me if i'm wrong)
2000-04-19 04:46:23 +00:00
enami
debe6e88b6
Calculate an offset of mailbox_in correctly by renaming BHA_MBO_OFFSET
...
to BHA_MBX_OFFSET and using it also for mailbox_in. Since all mailboxes
should be placed in a single continuous memory due to a hardware limitation,
an offset of any mailbox can be/should be calculated using a same expression.
2000-04-19 02:39:12 +00:00
mrg
19a31e7b5e
add a newline to this fake autoconfig line.
2000-04-19 02:26:08 +00:00
haya
edfd8044ec
Maintenace: add definitions for command status register.
2000-04-19 01:19:04 +00:00
matt
79a5b2164e
Remove autconf stuff. not needed and wrong.
2000-04-18 21:25:31 +00:00
minoura
dd8c46b8be
Explicitly include opt_m680x0.h.
2000-04-18 21:06:06 +00:00
minoura
64a8c7e0c8
defopt M680[2346]0.
2000-04-18 21:04:51 +00:00
matt
414d3f059d
Compile -Os instead of -O2 (optimize for space).
2000-04-18 20:47:04 +00:00
ragge
d334fb3019
Handle NCR5394 SCSI as NCR5380. (Doesn't matter, it will use the ROM
...
routines anyway).
2000-04-18 20:25:13 +00:00
ragge
86d5f2d67d
Add RPB number for VS4000 SCSI.
2000-04-18 20:23:54 +00:00
tsubai
be4988ee6d
Make kernel profiling work.
2000-04-18 17:06:01 +00:00
cgd
0d117aa518
regen for changed pcidevs
2000-04-18 16:38:12 +00:00
cgd
88e62f7c84
SiByte, Inc. is vendor 0x166d.
2000-04-18 16:37:00 +00:00
mhitch
a218b8543c
Enable cache on the 4000/VLC.
2000-04-18 16:28:04 +00:00
mhitch
a90cf56cda
PC_ICR doesn't exist on the 4000/VLC and trying to read it apparently
...
causes problems when the cache is enabled. Don't access it if boardtype
is VAX_BTYP_48.
2000-04-18 16:25:59 +00:00
mhitch
6c0d2ca981
Add some defines gleaned from OpenVMS to enable cache on the 4000/VLC.
2000-04-18 16:23:42 +00:00
tron
939041f1aa
Fix typo in last commit.
2000-04-18 14:48:53 +00:00
eeh
c58f0ee9cd
Prevent the system from getting watchdog reset by returning directly to user
...
mode if restoring the user window traps. Also reduce the time we run with
%tl>0.
2000-04-18 02:12:25 +00:00
eeh
2aec15d3d3
Turn off traptrace before printing a panic message so we don't flush the useful
...
traces out with the printf guts, and wrap some lines at 80 columns.
2000-04-18 02:07:57 +00:00
pk
4665cccb20
Comment-out the RASTERCONSOLE_{BG,FG} color settings; they represent
...
the default initialization.
2000-04-17 21:48:23 +00:00
pk
a558005cec
When constructing `ri_devcmap[]', pack four instances of the LUTs in each
...
32 bit wide entry (as not documented in the non-existent rasops(9)..)
2000-04-17 20:37:28 +00:00
ragge
a1413dca83
Fetch the SCSI ID out of NVRAM instead, if possible.
2000-04-17 20:36:23 +00:00
pk
d5a5871d3c
Make sure to reset the CPU context in ctx_free().
2000-04-17 20:32:00 +00:00
oster
5845348e54
Revert last change (the last change was not necessarily desirable, and
...
had some other minor side-affects that were troublesome).
2000-04-17 19:35:12 +00:00
drochner
5e990a7f7c
implement bus_space_vaddr()
2000-04-17 17:39:17 +00:00
drochner
13c9f8d398
implement bus_space_vaddr()
2000-04-17 17:24:48 +00:00
cgd
a267efd061
#if 0 the (way bogus) PCI_CLASS_COMMUNICATIONS/PCI_SUBCLASS_BRIDGE_PCI (!!!)
...
match pointed out (again?) by Johan Danielsson, after i repeatedly told
him not to do something similar in com_cardbus.
2000-04-17 16:45:04 +00:00
ragge
d37dfad561
DEC have the internal SCSI controller as ID6, and CDROM as ID7.
2000-04-17 16:30:40 +00:00
itojun
81e8059dfc
fix endian issue in filling in interface id.
...
better sync with kame (nuke space at EOL).
2000-04-17 16:26:07 +00:00
mrg
9dc12ba15b
regen
2000-04-17 14:33:11 +00:00
mrg
a6f7a7855f
implement lchflags(2), which does the chflags(2) dance without following
...
symlinks, and thus can operate on symlinks. remove a bogus comment in
chflags(1) that claims symlinks do not have file flags.
XXX: todo -- make chflags(1) use lchflags(2) when given the right options.
2000-04-17 14:31:21 +00:00
joda
5c507c46b5
regen
2000-04-17 12:01:20 +00:00
joda
4f797c7b55
Panasonic KXLC003
2000-04-17 12:00:35 +00:00
joda
7dbedb5a11
rewrite match function to use CIS information
2000-04-17 09:21:59 +00:00
joda
1f1d169e20
extract serial funce
2000-04-17 09:16:38 +00:00
joda
6e5b98b12c
add serial funce entry
2000-04-17 09:15:58 +00:00
tron
5bfc315184
Fix typo in comment.
2000-04-17 07:57:21 +00:00
thorpej
d8bccc7c6e
Regen.
2000-04-17 00:26:45 +00:00
thorpej
fcd420cf5d
Add product ID for the S3 Trio3D/2X AGP graphics adapter.
2000-04-17 00:26:22 +00:00
christos
18e39b7462
PR/9901: mycroft: make select guts partially visible for X/Open 5.
2000-04-16 23:12:13 +00:00
pk
470504f184
Use screen attributes passed to our hardware rasops routines.
...
Move colormap initialization to cg6reset(), so this is also done
on last close of the framebuffer device (e.g. after X server shutdown).
2000-04-16 22:17:03 +00:00
pk
a644297344
Initialize the rasops device colormap to match colormaps used by
...
our supported devices (including even coloured text on the console).
2000-04-16 22:12:05 +00:00
pk
065ce82243
Switch initial colormap setup again to be compatible with the PROM's,
...
i.e. background at index 0: white, foreground at index 255: black.
Also, allocate a slice for an ANSI colormap, so we can experiment
with coloured text on the bare console.
2000-04-16 22:07:24 +00:00
pk
0ba1516cd7
Use a default attribute to restore the display mode to original settings.
...
Also, pass in WSATTR_COLORS at all times when allocating screen attributes
since without it we cannot even get black-on-white from rasops(9).
2000-04-16 21:49:49 +00:00
chs
9431f1857b
change "nextvnodeid" from a global in namei.h to a static in
...
the one function that uses it.
2000-04-16 21:41:49 +00:00
chs
d0fb21715e
limit the number of namecache entries to numvnodes rather than desiredvnodes.
...
getnewvnode() has been changed to virtually guarantee that we'll have more
vnodes than "desired", so previously there would always be more vnodes
than namecache entries. this fixes PR 9792.
2000-04-16 21:39:57 +00:00
pk
8505eb6375
Slight optimization when searching the video parameter table.
2000-04-16 21:01:43 +00:00
chs
e34eb900c0
remove an LBL ifdef that we can't turn on anyway.
2000-04-16 20:59:49 +00:00
chs
46faa6bb58
remove ifdefs to skip htons() on some big-endian platforms.
2000-04-16 20:58:52 +00:00
chs
d444bb4032
undo rev 1.13, which is to say, don't block interrupts while deactivating
...
one pmap and activating another. this isn't actually necessary (since
pmap_activate() and pmap_deactivate() affect only user-level mappings,
which cannot be accessed from interrupts anyway), and pmap_activate()
is very slow on old sun4c sparcs so we can't block interrupts for this long.
this fixes PR 8322.
2000-04-16 20:52:29 +00:00
thorpej
2f7f997512
Oops, forgot RCS ID.
2000-04-16 19:46:54 +00:00
thorpej
506bf156e0
Kernel configuration file for my Abit BP6+dual Celeron machine. This
...
could be used as an example configuration file for that motherboard.
2000-04-16 19:46:21 +00:00
augustss
876b21e514
Add more items and reorganize.
2000-04-16 18:38:44 +00:00
matt
0aae0cd7a6
only print packets if debug > 1
2000-04-16 17:03:42 +00:00
matt
ee754e5548
Autoconf for SCSI stuff on VS4000s.
2000-04-16 16:03:42 +00:00
matt
5fa416e77a
This should have never been checked in. it's what this directory is supposed
...
to make. opps.
2000-04-16 15:59:02 +00:00
itojun
3e34240544
perform neighbor unreachability detection on p2p links (spec requires
...
it for bidir p2p links).
improve -i in ndp(8) to allow tweaking per-interface ND flag on.
fix ndp(8) infinite loop on certain routing table setup.
2000-04-16 15:27:59 +00:00
itojun
30272756a8
better sync with latest kame (cosmetic only).
2000-04-16 15:00:56 +00:00
kleink
903fce95c7
* GC two unused variables.
...
* Printf format nits.
2000-04-16 14:44:03 +00:00
minoura
4d4c982aa3
all -> realall.
2000-04-16 14:19:53 +00:00
minoura
311c19c0d5
Sync w/ GENERIC.
2000-04-16 14:17:59 +00:00
nisimura
a01973aecb
Change the way how pmap_protect() modifies the protection of KSEG2
...
space using MIPS_TBRPL() call. It avoils to 'vistimize' a possibly
useful TLB entry. XXX MachTLBUpdate() will be retired, soon.
2000-04-16 10:16:19 +00:00
nisimura
8feff14832
Fix a typo in the previous change.
2000-04-16 10:08:32 +00:00
ragge
9403f3fec8
Reset the device before starting the init sequence.
...
Add shutdown hook.
2000-04-16 09:55:39 +00:00
ragge
637d2e3a82
Be a little bit more generous with TBIA.
2000-04-16 09:42:22 +00:00
ragge
7ad2b0ede3
Call doshutdownhooks().
2000-04-16 09:41:51 +00:00
nisimura
4edcc4fca2
Change the way to implement zero copy data move in pagemove() using
...
MIPS_TBRPL(). It saves about 20 instructions to run for each
iteration, and avoids TLB polution. Currently works for MIPS1 only
configuration.
2000-04-16 09:09:42 +00:00
nisimura
7717409808
Introduce MIPS_TBRPL() which replaces a TLB entry of given vaddr
...
with new entryHi and entryLo pair iff found in TLB. Works only
for KSEG2 this moment. mips3 version will follow.
2000-04-16 09:00:26 +00:00
tsutsui
95dd4d0f2c
Include "zstty.h" instead of "zsc.h".
2000-04-16 05:42:40 +00:00
oster
c71398f7a9
Don't allow configuration where the specified SectPerSU may result in IO larger
...
than MAXPHYS being sent to underlying devices. Addresses PR#9868.
Will change if/when MAXPHYS goes bye-bye.
2000-04-16 03:24:26 +00:00
takemura
95e706c931
Don't call IsDlgMessage() if we are on Windows CE 2.01.
2000-04-16 03:17:59 +00:00
matt
92b3e1fecd
Use objcopy to emit the binary and linked around for debugging.
2000-04-16 01:44:36 +00:00
matt
5e9394eecb
move ustarfs to end so that '@" can be avoided. from mhitch.
2000-04-16 01:42:41 +00:00
matt
faec4da943
Add missing cases for MARIAH/SOC/NVAX and fix a comment or two.
2000-04-16 01:41:23 +00:00
soda
c56a43535d
remove following symbols which became unnecessary in recent cpu_intr() change:
...
mips_hardware_intr
MIPS3_INTERNAL_TIMER_INTERRUPT
mips3_intr_cycle_count
mips3_timer_delta
2000-04-15 22:05:51 +00:00
soda
94ee00e39d
define `ssir' here, rather than misp/mips/trap.c (like other mips ports)
2000-04-15 22:02:26 +00:00
soda
79bdf6e4a6
adapt interrupt() -> cpu_intr() change
2000-04-15 22:01:14 +00:00
soda
b3dcd5c3ee
add some TODOs.
...
overblocking and related problems are currently common to all mips ports.
2000-04-15 21:57:37 +00:00
scw
9b7b8d2fff
Bah, forgot to add intr.h during my last round of roto-tilling.
2000-04-15 21:20:35 +00:00
tsarna
a32696c2de
Death to nfsiod!
...
It is replaced by kernel threads that do the same thing. The number of
kernel threads used is set with the vfs.nfs.iothreads sysctl.
2000-04-15 21:14:48 +00:00
scw
8e95e817ec
Move <machine/cpu.h> above <m68k/*.h> so we get M680x0 #defines
...
for those m68k ports which define them in the former file.
2000-04-15 20:31:27 +00:00
is
136b230eaa
Don't use runtime systems' includes.
2000-04-15 20:10:41 +00:00
mrg
6b7f13609a
remove <vm/vm_swap.h> and <vm/vm_conf.h>
2000-04-15 18:08:12 +00:00
simonb
450dc64ed8
Remove some routing specific sysctl function declarations from
...
<sys/sysctl.h> and make them static in net/rtsock.c.
2000-04-15 17:51:27 +00:00
simonb
b75e8aa042
There is no vm_sysctl() or fs_sysctl() - don't declare prototypes for
...
them.
2000-04-15 17:43:53 +00:00
simonb
dd06794f0b
Remove shmsegs declaration from conf/param.c - it doesn't belong here.
...
Instead, put it in kern/sysv_shm.c.
2000-04-15 16:49:35 +00:00
augustss
6d6ad52fd4
Regen.
2000-04-15 15:57:59 +00:00
augustss
f6b73a654c
Add another camera.
2000-04-15 15:57:27 +00:00
veego
8c1897c2fd
Also add the Intel ID for the LAN+MODEM56 card to the csdevs list to get
...
it working.
2000-04-15 06:29:25 +00:00
nisimura
e54e10f9ce
- Withdraw dealfpu() code which has been never useful so far.
...
- XXX It was a mistake to add CP1 insn encoding values into cpuregs.h.
Those will be relocated into mips_opcode.h with some adjustment work.
2000-04-15 06:21:01 +00:00
simonb
55bf62c1a1
For the KERN_PROC sysctl, when using KERN_PROC_TTY allow
...
KERN_PROC_TTY_NODEV to select processes with no controlling
tty and KERN_PROC_TTY_REVOKE to select processes with a
revoked controlling tty.
2000-04-15 04:38:07 +00:00
mrg
2aba26f773
- auxio cleanup and sbus support.
...
- make GENERIC64 include GENERIC and set the 3 optoins it needs. suggested
by hubert feyrer.
- add a comment that we maybe should use the `bpp' driver, not the lpt, on
the ebus because the `bpp' driver does DMA already.
- ebus_attach_args got a member renamed
2000-04-15 03:08:12 +00:00
mrg
e4ca29ac00
kill dead code
2000-04-15 03:07:38 +00:00
tsarna
24d492c6f3
Default the keymap to new "us.iopener" mapping
2000-04-14 23:14:25 +00:00
tsarna
501c07e5d4
Add an "iopener" keymap variant, giving us.iopener and
...
us.iopener.swapctrlcaps. This makes F1 ("Back") into Escape, and shifts
the other keys over by one, so F2-F12 ("Forward"-"Home") become F1-F11.
2000-04-14 23:11:08 +00:00
is
f0b2e9f184
Make this work again after the last changes...
...
remember, folks, potential Amiga console devices run autoconfiguration
_twice_.
2000-04-14 21:56:22 +00:00
pk
321bc31690
Remove spurious splx() call.
2000-04-14 20:33:48 +00:00
is
97df1401a1
Move original Motorola files to the "dist" subdirectory, in response
...
to PR 9626 by Kris Shannon.
2000-04-14 20:24:29 +00:00
pk
20c3689343
Initialize local variable `bt' in cgthree_attach().
2000-04-14 19:36:43 +00:00
scw
c56f4bceb8
Fix some callout fallout. Hi Jason!
2000-04-14 19:31:50 +00:00
augustss
b6ef06e018
Add a file I forgot.
2000-04-14 18:15:47 +00:00
augustss
633209364f
Add FTDI FT8U100AX driver.
2000-04-14 14:53:32 +00:00
augustss
2ed37fcf5d
Add driver for FTDI FT8U100AX serial adapter.
...
XXX This is still experimental and needs more work.
2000-04-14 14:51:22 +00:00
augustss
689485b4df
Add Rio 500 device.
2000-04-14 14:44:49 +00:00
takemura
1572bc4bfd
Make 'Boot' button to be default push button.
...
You can push return key to boot.
(But it does not work on Windows CE 1.0.)
2000-04-14 14:42:29 +00:00
augustss
219f3c9ccf
More debug.
2000-04-14 14:41:35 +00:00
augustss
1767c08cba
Add a capability for pre/post processing on write/read.
2000-04-14 14:21:55 +00:00
augustss
3149043619
Add a driver for the Rio 500 MP3 player.
...
XXX This driver might go away again, since you can do it all with ugen.
XXX But this driver is compatible with the Linux driver so there are
XXX programs for it.
2000-04-14 14:20:02 +00:00
augustss
0839e2a0d9
Regen.
2000-04-14 14:15:41 +00:00
augustss
471d06cfbc
Rename FUTURE to FTDI.
...
Add the funky little D-Link radio.
2000-04-14 14:14:48 +00:00
pk
cd955cb171
dvma_init: avoid integer variable overflow
2000-04-14 14:14:47 +00:00
augustss
017ca78459
Make attach of ugen work as it should so product&vendor locators can be used.
2000-04-14 14:13:56 +00:00
augustss
e44f0f1147
Support for SIGIO.
2000-04-14 14:12:47 +00:00
augustss
eaaf682603
Fix a typo in a comment.
2000-04-14 14:12:11 +00:00
augustss
e1f94170e5
Generate a diagnistic dump on "Host Controller Halted".
2000-04-14 14:11:36 +00:00
tsutsui
8d9c5e8206
- Fix comments. (NEWS have Zilog 8530, not Intel 82530)
...
- Fix cdev_tty_init() arg on newsmips (NZSC -> NZSTTY)
2000-04-14 13:41:24 +00:00
tsutsui
7865e586d3
Typo in comments. (Zilog 8350 -> 8530)
2000-04-14 13:29:57 +00:00
tsubai
dd83a9aa4f
Make this compile.
2000-04-14 10:22:06 +00:00
tsubai
0546f6b51a
Adapt cpu_intr change.
2000-04-14 10:11:06 +00:00
mrg
01ff053e58
add bpt and lpt. fixes final gcc warnings for GENERIC.
2000-04-14 08:36:39 +00:00
mrg
af6a8541e4
add some casts to (u_long) to shut up gcc. cleanup unused variables
2000-04-14 08:29:03 +00:00
mrg
dfe176302c
add some casts to (u_long) to shut up gcc
2000-04-14 08:22:49 +00:00
mrg
726f5f3169
two more compiler warnings killed.
2000-04-14 04:08:26 +00:00
msaitoh
7e7033d239
Catch the breakpoint trap ("trapa #0xc3") and send SIGTRAP.
...
Now works breakpoint and continue!
TODO: single step
2000-04-13 23:00:42 +00:00
jhawk
a71de73182
From kern/9569.
...
Preserve ddb's idea of "count" from one command to the next if
repeating a command via hitting newline.
2000-04-13 22:48:29 +00:00
soren
0ce39b7430
Typo; user stack only needs to start one page below 0x80000000.
2000-04-13 22:02:54 +00:00
eeh
9b019404f8
Apparently gas 2.9.5 (don't ask) does not like to add values to %lo()
...
directives so move the additions inside %lo() to make it happy.
Hopefully this won't break older versions.
2000-04-13 18:40:27 +00:00
eeh
92aaaad1e1
Make /etc/mk.conf optional for kernel builds.
2000-04-13 16:57:51 +00:00
itojun
7716681678
add comment on sdl_alen check (sync with kame)
2000-04-13 16:27:00 +00:00
itojun
ff22afe8bf
fix fatal bug in EUI64 generation (0xff -> 0xfe typo)
2000-04-13 16:21:25 +00:00
joda
e3f576a688
disable function after attach
2000-04-13 16:17:55 +00:00
msaitoh
8796b43e1c
remove sys_vtrace()
2000-04-13 15:54:27 +00:00
msaitoh
c750d5f42d
- save/restore more registers in process_{read,write}_regs()
...
- return EINVAL in process_sstep (temporary)
2000-04-13 15:51:26 +00:00
msaitoh
9c13ab1d7c
KNF
2000-04-13 15:45:11 +00:00
msaitoh
ca4ca0111c
exports MACH and MACL registers, too.
2000-04-13 15:41:55 +00:00
msaitoh
9a41bed54e
move the Interrput Priority Level (IPL_*) definitions into MD part.
2000-04-13 15:36:09 +00:00
tsutsui
934ac598d8
Use "${OBJCOPY} -O binary" to strip a.out header.
2000-04-13 14:44:02 +00:00
mrg
fd85c1c4a2
avoid a potential memory leak.
2000-04-13 14:39:34 +00:00
itojun
8b8adc2ee4
bark if sdl_alen == 0. test code for KAME PR 235.
2000-04-13 14:32:53 +00:00
tsutsui
297d0a58b7
Disable DPRINTF().
2000-04-13 14:19:57 +00:00
itojun
18f9d539cc
even if nd6_nud_hint is called, do not change a neighbor's status
...
unless the old status is probably reachable (i.e. the link-layer address
has already been resolved).
KAME PR 235.
2000-04-13 14:11:06 +00:00
itojun
af4021abec
do not return icmp6 error against icmp6 error.
...
(this is due to a bug in header chain chasing)
2000-04-13 14:07:10 +00:00
is
ab879a6479
Copy M_BCAST and M_MCAST flags when fragmenting a packet (else
...
Multicast packets won't be send to the correct link layer address
by the interface driver).
By Artur Grabowski, PR 9772.
2000-04-13 11:48:07 +00:00
mrg
5792df1cf9
- do the "options<space><tab>" thing everywhere.
...
- disable COMPAT_AOUT.
- enable hme at sbus/pci
- enable bpp at sbus
- clean up esp attachments
- enable all xxphy's
- sync GENERIC & GENERIC64.
2000-04-13 11:23:14 +00:00
joda
1498ccad74
add com at cardbus
2000-04-13 11:21:18 +00:00
joda
39a71b22e4
add com at cardbus comment
2000-04-13 11:20:06 +00:00
joda
90bee16298
enable com at cardbus
2000-04-13 11:18:24 +00:00
joda
8fba568264
cardbus attachment for com devices (thanks to Chris Demetriou and
...
Darren Reed for constructive criticism and help with testing)
2000-04-13 11:17:53 +00:00
joda
3692f27c7d
regen
2000-04-13 10:13:12 +00:00
joda
69241946d8
add entry for a Xircom modem (as reported by Darren Reed)
2000-04-13 10:12:46 +00:00
joda
81bac16312
add CARDBUS_SUBCLASS_COMMUNICATIONS_SERIAL
2000-04-13 10:11:15 +00:00
mrg
fa13d97855
this does not need auxreg.h
2000-04-13 09:54:43 +00:00
mrg
b60fe7f45a
store all the physical address bits.
2000-04-13 09:53:49 +00:00
mrg
e7f3d69787
this does not need auxreg.h
2000-04-13 09:52:46 +00:00
mrg
542f08a422
add a version file.
2000-04-13 09:38:12 +00:00
mrg
f2ab01bf42
copy the "sparc" clean/cleandir target code, so that "cleandir" actually does a "clean"
2000-04-13 09:23:38 +00:00
chs
c81c7aa367
always define PI_MAGIC so this compiles in all cases.
2000-04-13 00:44:19 +00:00
scw
d5d6c20e74
Regen
2000-04-12 21:13:12 +00:00
scw
e083abcad8
Add support for the SOHOware PCMCIA Ethernet card, model ND5100-E.
...
This seems to be a re-badged NDC (National Datacomms. Corp) card.
It needs a quirk entry due to lack of manufacturer tuple in the CIS.
For some reason, the 'Tx/Rx' LED on the connector module is inverted
such that it is off during network activity...
2000-04-12 21:07:55 +00:00
christos
44c22dc618
make this compile with -DDEBUG_SVR4 [wrong variable name]
2000-04-12 15:13:15 +00:00
christos
e3004f2598
make this compile with -DDEBUG_SVR4 [lossage because sizeof is u_long now]
2000-04-12 15:12:13 +00:00
takemura
a3c99d2662
Dialog Box style key function. You can push space key to boot.
2000-04-12 15:07:34 +00:00
pk
eba24e4799
* Spell shift counts in decimal and masks in hex
...
* Optimize numerous array references
* Cleanup whitespace turds
2000-04-12 14:22:28 +00:00
simonb
6008cfd5de
Remove bogus "#ifdef EIDRM" checks and warnings that BSD doesn't define
...
EIDRM - EIDRM was added over two years ago!
2000-04-12 13:08:26 +00:00
pk
a388797ed5
Ignore unknown devices on mainbus.
2000-04-12 11:40:12 +00:00
fvdl
ea3e5a38b8
Fix from Ethan Solomita <ethan@geocast.com> to avoid a livelock problem
...
where the buffer cache code would be recycling B_AGE buffers with
dependencies.
2000-04-12 11:33:43 +00:00
itojun
c24f5b5068
add more IPv6 cases. not tested.
...
TODO: IPv6CP support. currently IPv6 packet will be generated right
after link up (spec violation)
2000-04-12 10:51:15 +00:00
itojun
ecb5f2e56a
revisit in6_ifattach().
...
- be persistent on initializing interfaces, even if there's manually-
assigned linklocal, multicast/whatever initialization is necessary.
- do not cache mac addr in the kernel. grab mac addr from existing cards
(this is important when you swap ethernet cards back and forth)
now ppp6 works just fine!
call in6_ifattach() on ATM PVC interface to assign link-local, using
hardware MAC address as seed.
(the change is in sync with kame tree).
2000-04-12 10:36:38 +00:00
matthias
397c7cc20c
Merge all missing changes from sys/i386/i386/pmap.c;1.88.
2000-04-12 06:23:21 +00:00
nisimura
e7206926ef
Add a comment block describes what the intent of safepri global variable
...
as "During autoconfiguration or after a panic, a sleep will simply ..."
2000-04-12 04:40:50 +00:00
nisimura
cce3288e2f
Backout the previous change; safepri is an evil idea after all.
2000-04-12 04:30:35 +00:00
chs
6040f9fa38
remove sunos stuff.
2000-04-12 04:21:22 +00:00
chs
b9c0393d3f
remove support for sunos and ancient BSDs.
2000-04-12 04:20:47 +00:00
chs
1f7a988bd2
unconditionalize "ifdef sparc".
2000-04-12 04:06:41 +00:00
nisimura
19156689a9
- Abandon processor type check for R3000 or R4000/R4400 because VAX
...
processor is unlikely able to boot the kernel.
- Correct comments about what mach_init() and cpu_startup() do.
- Relocate cn_tab = &promcd to make ROM console printf() work in the
earliest stage of boot.
2000-04-12 03:05:08 +00:00
christos
aca4545896
Markus Kilbinger <kilbi@rad.rwth-aachen.de>, reported that https: does not work.
...
The reason is that netscape tries to do stream operations on a plain file. So
we avoid that...
2000-04-12 02:46:41 +00:00
nisimura
a889c809fd
MIPS1_PSL_LOWIPL -> PSL_LOWPSL. No functional change is expected.
2000-04-12 02:01:07 +00:00
nisimura
ce0937324b
- Move a loop invariant of 'if (CPUISMIPS3)' out of pagemove().
...
- XXX I'm not sure whether the anticipatory MachTLBUpdate(to, pte) is
a gain or loss on runtime. If not a loss, it should be MIPS_TBIS().
2000-04-12 01:37:58 +00:00
nisimura
85f3855a8c
- Implement mips3_TBIAP().
...
- Remove obsoluted routines in locore_mips3.S
- addiu -> addu, andi -> and, ori -> or.
2000-04-12 01:05:34 +00:00
mrg
1fdef1b204
deja vu: add "struct device *booted_device;" so raidframe links.
2000-04-12 00:47:10 +00:00
uch
441ca96c28
sync with new mips trap.c
2000-04-11 17:57:42 +00:00
castor
4ebaf4d105
Taken from Jeff Smith <jeffs@geocast.com>:
...
Fix regress/lib/libc/ieeefp/except for MIPS. Newer FPE handling code
did not generate SIGFPE, but always SIGILL. Add this back to the
assembly code. The QED 5231 requests the kernel emulates some of
the conditions that generate an SIGFPE, but when the emulation code
did a ctc1 to fsr with an exception the kernel got a FPE in kernel mode.
Fix this by saving the fp regs earlier, then saving the new FSR in
the context. This allows the FSR value to be seen by the SIGFPE
handler.
Add fp emulation for 8 mips2 fpu instructions to handle exceptions
(round.w.fmt, trunc.w.fmt, ceil.w.fmt, floor.w.fmt). This lets
perl5 run when compiled -mips2.
2000-04-11 16:28:05 +00:00
nisimura
8bbdc89989
One more line escaped from trap.c rework.
2000-04-11 12:05:35 +00:00