8f3fd0d6b3
Spelling.
2000-01-05 16:28:39 +00:00
caae0e1aa1
- Don't try to run the chip in big-endian mode. Not all chips support
...
this consistently, and it doesn't always work even when the chip
supports it.
- Make sure things DMA'd to the chip that the chip interprets are in
little-endian mode.
1999-12-11 00:32:59 +00:00
9ed17102f4
- Use the common MII bit-bang module.
...
- Add support other than 128-byte SROMs.
- Add support for the 21142/21143 MII.
1999-11-19 18:22:42 +00:00
9cce953883
Don't panic so easily on failure; just issue notification.
1999-10-18 21:59:19 +00:00
63b8530b4e
Update for SCSPI changes.
1999-09-30 23:04:39 +00:00
2bb59077e8
EISA frontend for DPT driver (as yet untested).
1999-09-29 20:38:51 +00:00
f866a1af51
Regen.
1999-09-29 17:45:22 +00:00
2abb3cfff1
- Add vendors: DPT, NEC, AT&T
...
- Add products: DPT, NEC and AT&T EATA SCSI adapters
1999-09-29 17:40:18 +00:00
5c34356d4c
First crack at shared ROM/shared interrupts on 21040 multi-port boards,
...
plus quirk identification for non-multiple-port boards.
1999-09-14 22:25:48 +00:00
d05d28146b
EISA bus front-end for the New Tulip Driver, for the DEC DE425 EISA
...
board. The DE425 is basically a DECchip 21040 on an EISA board, plus
a Cool Address Decoder Hack which maps the PCI configuration
space registers into EISA I/O space, interleaved with the Tulip CSRs,
which are spaced further apart than on the PCI versoin.
This is currently *untested* until the DE425 boards that folks have
promised me arrive. But, it should work, since the 21040 works.
1999-09-14 05:58:00 +00:00
f625e72668
Regen.
1999-08-19 08:06:50 +00:00
93f86e5ed5
Recognize a 3Com 3c509 Combo configured in EISA mode. Fixes PR kern/8234
...
by Thomas Pfaff.
1999-08-19 08:06:31 +00:00
979a80207e
Fix duplicate "3com" from attach, as noted in PR#7607.
1999-04-13 22:34:05 +00:00
6ac54498c7
pull eisa_machdep.h in from machine/
1999-03-19 03:01:50 +00:00
7a9cc5bfbc
Update for changed scsipi_xfer struct.
1998-12-09 08:37:50 +00:00
74bc9f26d5
Update HBAs to incorporate the new max_lun property.
1998-12-05 19:43:33 +00:00
5f0577babc
Adapt to the new scsipi_adapter interface.
1998-11-19 21:43:00 +00:00
7b10c3e7e4
Add the 'ex' driver, a DMA driver for 3Com 90x and 90xB cards. Rename
...
constants from EP_ to ELINK_ since they're now used in the ex driver as well.
1998-11-04 00:29:28 +00:00
29d472f53d
Garbage-collect the open_target_lu and close_target_lu entry points from
...
struct scsipi_adapter; they were not used.
Add a scsipi_ioctl entry point to struct scsipi_adapter. This will be
used to issue ioctl commands to the host adapters.
Inspired by PR #6090 , from Matt Jacob.
1998-10-10 00:28:28 +00:00
a1ac68819f
Assign my copyrights to TNF.
1998-08-17 00:26:32 +00:00
6dc903202f
Assign my copyrights to TNF.
1998-08-15 10:10:47 +00:00
dd769acbfb
Name some constants consistently between drivers.
1998-08-15 02:37:50 +00:00
cc84859459
Map the EISA registers correctly!
1998-08-15 02:30:56 +00:00
196dfd7597
Always map the EISA configuration registers.
1998-08-15 02:26:31 +00:00
e9c5407d64
Only map the amount of space the device actually occupies.
...
Part of PR #5279 , Martin Musemann.
1998-08-15 01:59:25 +00:00
b170caf730
Completely rewrite media selection. Add support for the MII/PHY on
...
the 3Com 3c905-TX and 3c905-T4. Fix handling of the MII on the
3c595-MII and 3c597-MII (can't talk to the PHYs on these cards; just
use "manual" for the external MII port).
Fixes kern/4782 (Chris Demetriou).
1998-08-12 18:51:52 +00:00
011f2bda08
defopt NS, NSIP.
1998-07-05 06:49:00 +00:00
3751946b97
defopt INET, NETATALK.
1998-07-05 00:51:04 +00:00
466e784ee1
defopt DDB.
1998-07-04 22:18:13 +00:00
f83df102e6
Regen.
1998-07-01 21:59:20 +00:00
87ee222a07
Add vendor IDs for Hewlett-Packard, Interphase and Mylex; add a product ID
...
for the Interphase Seahawk 4811 FDDI Controller.
1998-07-01 21:57:32 +00:00
e2578025b3
Point people to the correct Makefiles to build generated headers.
...
(Suggested by Manuel Bouyer.)
1998-06-16 18:36:03 +00:00
651b44e211
Rework the way kernel include files are installed. In the new method,
...
as with user-land programs, include files are installed by each directory
in the tree that has includes to install. (This allows more flexibility
as to what gets installed, makes 'partial installs' easier, and gives us
more options as to which machines' includes get installed at any given
time.) The old SYS_INCLUDES={symlinks,copies} behaviours are _both_
still supported, though at least one bug in the 'symlinks' case is
fixed by this change. Include files can't be build before installation,
so directories that have includes as targets (e.g. dev/pci) have to move
those targets into a different Makefile.
1998-06-12 23:22:30 +00:00
ea3a1d9c44
Nuke __BROKEN_INDIRECT_CONFIG.
1998-06-08 06:55:54 +00:00
cfbb5f3f21
Add bus_dma(9) support for the DEFxA FDDI driver
1998-05-21 20:44:02 +00:00
f80f6601b0
Fix a typo in the bus_dma changes.
1998-03-17 21:30:38 +00:00
d2551d5b3f
Use bus-dma functions.
1998-03-16 15:36:17 +00:00
4399060ec9
- Perform all necessary bus_dmamap_sync() operations.
...
- Greatly simplify allocation and DMA mapping of the mailbox and ccbs.
- Be more robust against resource shortage errors, and report errors better.
1998-02-17 03:02:30 +00:00
8354e68508
Remove "class" declarations, and add "devclass" declarations where
...
appropriate. Fix several inconsistencies between device class and
attributes. Mostly from Chris Demetriou.
1998-02-16 22:12:45 +00:00
8abe76d2f0
Add offset and length parameters to bus_dmamap_sync(), used for specifiying
...
partial syncs of a DMA mapping.
1998-02-04 05:12:46 +00:00
a7c5c1ef3c
Add dm_mapsize to bus_dmamap_t and rename BUS_DMAMEM_NOSYNC to
...
BUS_DMA_COHERENT.
1998-02-04 00:32:55 +00:00
2538ed1062
Use offsetof() from libkern.h
1998-01-28 02:23:04 +00:00
9c183e53cb
Slight change to previous.
1998-01-12 08:57:20 +00:00
b731c12641
Adjust for config changes.
1998-01-12 08:51:09 +00:00
c574630ead
Add device classes.
1998-01-12 08:48:28 +00:00
b0cf8e166d
Update copyright.
1998-01-09 21:16:36 +00:00
1434d2e50d
Map the I/O region correctly, but reading its address from the EISA config
...
space.
1998-01-09 20:55:17 +00:00
12b9ab0fd5
Regen.
1998-01-09 06:46:47 +00:00
9b7afe221e
Put RCS IDs into the generated files, in the correct place.
1998-01-09 06:46:26 +00:00
106bb71744
Regen: back out RCS ID related changes.
1998-01-08 00:33:49 +00:00
ad