dc3c0d7db7
Define VIDEO enable bit (per Jason Thorpe; PR#1672).
1995-10-23 23:36:28 +00:00
7a9ddaff33
On-board bwtwo diddles a system enable register bit for video, per Jason
...
Thorpe (PR#1672).
1995-10-23 23:35:03 +00:00
f2345fb358
Use correct size access (char,short,int) in db_read_bytes, db_write_bytes
...
otherwise access to some device registers will give misleading results!
(I learned this the hard way while debugging the NCR SCSI driver...)
1995-10-23 18:40:35 +00:00
5e55f88874
Remove `-fno-builtin'.
1995-10-22 17:36:33 +00:00
af18124282
We no longer need -fno-builtin; syscall namespace has been cleaned up a bit.
1995-10-22 06:05:21 +00:00
1fa962ddd0
netbsd.warped.com aka. {ftp,sup}.netbsd.org
1995-10-20 21:24:37 +00:00
440b596a77
Added M_OP_POS (positioning tape).
1995-10-20 13:51:56 +00:00
b57ff30a87
Added #ifdef _KERNEL around definition of struct rpb.
1995-10-20 13:47:27 +00:00
ad3443e06c
Additions to be able to write to massbuss disks standalone.
1995-10-20 13:43:43 +00:00
fbc5d6e054
SA_LIB -> SALIB
...
Include rpb.h. Typeclash fixes.
Removed #include of non-existing file.
1995-10-20 13:35:41 +00:00
5d49d3ac8f
Use macros.h when STANDALONE is defined.
1995-10-20 12:55:06 +00:00
b2d4fa2dd3
cleanup warnings (fixes pr#1642)
1995-10-20 10:08:24 +00:00
62150b43b1
Truncate the incoming packet if it doesn't fit into the buffer.
1995-10-19 18:43:27 +00:00
ef52ec31c1
Recompile genassym if the Makefile changes.
1995-10-18 22:50:15 +00:00
bbfd54d128
Merge from netbsd-1-1 branch: kgdb_debug_panic decl; PR1633
1995-10-18 21:54:34 +00:00
126ecc3dda
Explain why sun3_context_equiv() can not just call set_segmap_allctx().
1995-10-17 23:16:40 +00:00
9182ffe624
Get rid of an extra twiddle() call (ufs.c does it.)
1995-10-17 23:07:19 +00:00
ca022f8909
Re-write of tapeboot, using a "rawfs" abstraction to hide the fact
...
that the device only supports block access. (Even works now!)
1995-10-17 22:58:10 +00:00
3b8faec21d
Initialize pointer to the fb method table. Not initializing the
...
method table for the 2100/3100 fb caused a panic when an X server started.
1995-10-16 22:28:36 +00:00
43358aae60
Deal with vendor, product, and revision strings properly.
1995-10-16 08:51:49 +00:00
61d3ef1018
Fix small oversight.
1995-10-15 22:09:45 +00:00
5dcaa0b51c
Be a tad bit more informative when the drive is attached. Print geometry
...
info when appropriate, because, darn it, it's useful.
1995-10-15 10:03:18 +00:00
c3779c515d
Fix typos.
1995-10-15 05:58:44 +00:00
5a227363fd
Fix problem reported by r_friedl@informatik.uni-kl.de; when LDT is resized,
...
the wrong amount of memory is freed.
1995-10-15 05:48:08 +00:00
e964003409
Rename some variables for consistency.
1995-10-15 05:43:49 +00:00
e8011301bf
Style police.
1995-10-15 04:18:27 +00:00
47c507f8fd
SUNOS_SYS_sunos_sigreturn -> SUNOS_SYS_
...
sigreturn.
1995-10-15 03:01:57 +00:00
ebc6d5a705
Use general bound-check function.
1995-10-14 20:17:46 +00:00
6ce6eef6d8
child_return broke Linux fork()
1995-10-14 14:06:16 +00:00
79053fd0de
Allow only transfers that are a multiple of DEV_BSIZE when doing 'raw' I/O.
1995-10-14 13:04:19 +00:00
6af0af5daf
Change the interface to prom_iopen() slightly, for tapeboot.
1995-10-13 21:44:57 +00:00
52f39566b5
Add tapeboot, make ${SA_PROG}.bin padded to a block boundary.
1995-10-13 21:44:08 +00:00
c4e07b055f
Bump version number.
1995-10-13 21:33:09 +00:00
c890f5c659
Boot program to help load tape kernels.
...
(You can even choose a tape segment!)
1995-10-13 21:27:30 +00:00
df737690d7
Remove (again) things accidently revived by cvs tag...
1995-10-13 19:37:06 +00:00
54606ca765
sync with sun3 version and libsa changes
1995-10-12 22:48:20 +00:00
bb184934d0
sync with sun3 version and libsa changes
1995-10-12 20:39:49 +00:00
3cbeee1f5b
changed sysarch() to sys_sysarch()
1995-10-12 20:03:39 +00:00
ab55ab9c8c
changed blkclr to bzero
1995-10-12 20:02:19 +00:00
31552196e9
remove bzero/strlen/bcmp as they are now in libkern
1995-10-12 20:00:40 +00:00
086845d5d3
Move the initialization of proc0's TSS and LDT to the end of cpu_startup(),
...
and switch to dynamically allocating the TSS.
1995-10-12 17:56:36 +00:00
67e41c3280
Remove extra serial device--forgot to check this in earlier.
...
The serial device now handles both channels.
1995-10-12 17:39:45 +00:00
6323b1197a
changed SUNOS_SYS_sunos_sigreturn to SUNOS_SYS_sigreturn.
1995-10-11 23:52:35 +00:00
50f83bdbdf
Maintain a free list.
1995-10-11 23:39:08 +00:00
2765bc7b44
Go back to statically allocating the GDT entries for proc0.
1995-10-11 19:32:31 +00:00
c9b339fcd1
Clean up deleted files.
1995-10-11 18:51:50 +00:00
059cb84d53
Fix typo. Also, remove diagnostic in svr4_sys_sysarch().
1995-10-11 17:04:11 +00:00
ce2afd8d64
Sync filesystem before running installboot.
1995-10-11 13:32:57 +00:00
ddbde6d166
Remove reference to dead variable.
1995-10-11 06:24:28 +00:00
fda13ac9c6
Clean up deleted files.
1995-10-11 05:28:06 +00:00
715002290d
remove old 1.0 distribution configs, tune 1.1 kernel configs.
1995-10-11 04:53:57 +00:00
72805df917
Various changes from John Kohl and me:
...
Map kernel stacks only at unique addresses.
Use one TSS per process.
Add sysarch calls for modifying IOPL and the I/O permission bitmap.
Add a compacting GDT entry allocator, for TSS and LDT selectors.
Enable modifying %fs and %gs with PT_SETREGS.
Sanitize various bits of code.
1995-10-11 04:19:29 +00:00
22bcf4e552
New function: set_segmap_allctx()
1995-10-10 21:38:56 +00:00
1b2cf12fa7
Need to use set_segmap_allctx() on kernel-space segments.
...
(Thanks again to David Jones!)
1995-10-10 21:37:29 +00:00
4575a77421
Get rid of things now in libkern: bzero, bcmp, strlen
1995-10-10 21:35:42 +00:00
464d1686fd
sysarch --> sys_sysarch
1995-10-10 21:34:50 +00:00
127019022a
SUNOS_SYS_sunos_sigreturn -> SUNOS_SYS_sigreturn
1995-10-10 21:33:33 +00:00
f1b8ad3645
New function: set_segmap_allctx()
1995-10-10 21:29:02 +00:00
dda519e3d9
The previous hack to save two instructions when the
...
return value of splx() was ignored did not prevent the
optimizer from re-ordering the asm statements! (Yikes!)
Revert this to the old, single asm statement method.
Thanks VERY MUCH to David Jones for finding this!
1995-10-10 21:28:00 +00:00
facfdf5c60
Use sys/scsi/files.scsi
1995-10-10 21:25:29 +00:00
b797d6e69d
Cosmetic: Kill trailing whitespace, etc.
1995-10-10 21:18:01 +00:00
64a90cd0b0
Check input channel in gettick(); for `L1-A' processing.
1995-10-10 20:11:33 +00:00
ebe37d8041
We don't need `rem.o'.
1995-10-10 20:07:54 +00:00
28484180c7
Fix minor oversight.
1995-10-10 18:27:25 +00:00
326e5742ac
Disable interrupt to avoid a bug. This makes the "new ncr" driver
...
stable enough to use in the distribution. We still need to find out
where the bug is when interrupts are enabled.
1995-10-10 08:08:01 +00:00
eb44441b87
Pull in microcode dependencies. Remove -fno-builtin.
1995-10-10 05:58:00 +00:00
5d9ff18d18
Switch to user code and data selectors in the GDT while handling signals.
1995-10-10 04:54:18 +00:00
25f53a986f
Add USERMODE() and KERNELMODE() macros, and use them.
1995-10-10 04:45:03 +00:00
712a3f32c4
Nuke blkclr and use thereof.
1995-10-10 04:14:18 +00:00
2738554927
Get rid of libkern duplicates.
1995-10-10 03:49:04 +00:00
5e13eea9b1
sysarch -> sys_sysarch
1995-10-10 03:48:33 +00:00
fcb8923ffa
Remove extra reference to LIBKERN.
1995-10-10 03:47:59 +00:00
54ed756bc4
Add another dca and grf
1995-10-10 02:12:37 +00:00
4fd4545646
Fix #include misordering.
1995-10-10 01:40:13 +00:00
37758b3f84
Minor change.
1995-10-10 01:30:25 +00:00
090f48526e
Add ahc and COMPAT_FREEBSD.
1995-10-10 01:29:15 +00:00
2dd293d3c3
Add hooks for COMPAT_FREEBSD, from Noriyuki Soda.
1995-10-10 01:26:36 +00:00
0ad97bc5c9
FreeBSD binary compatibility module, from Noriyuki Soda.
1995-10-10 01:22:31 +00:00
4dcb5917b8
Brr.. libkern.o is way too big for our bootxx..
1995-10-09 23:25:54 +00:00
be2f4294bf
Add `fd' to list of possible boot devices.
1995-10-09 22:34:03 +00:00
c4dc969b09
Point `bootdv' at the disk device instead of the controller (from Jason Thorpe).
1995-10-09 22:33:07 +00:00
29dcca9ffe
fix use of uninit vars from Bernd Ernesti <bernd@arresum.inka.de>
1995-10-09 19:26:15 +00:00
11c134fb80
fix typo
1995-10-09 15:53:39 +00:00
53eb8f8175
RASTERCONS now works on sun4's too.
1995-10-09 15:39:34 +00:00
d9a781419d
revert last commits was a mistake
1995-10-09 15:23:22 +00:00
78bd894529
add prototypes for isr stuff fixes pr# 1284 and 1569
1995-10-09 15:19:58 +00:00
0edda525b9
fix keymap (fixes pr#1254) from Blaz Zupan <blaz.zupan@uni-mb.si>
1995-10-09 14:27:18 +00:00
3973aeb080
fix hang bug from Ignatios Souvatzis <ignatios@theory.cs.uni-bonn.de>
1995-10-09 14:05:24 +00:00
dea30dfde9
make work with newer grfconfig now in /usr/sbin. from
...
Bernd Ernesti <bernd@arresum.inka.de>
1995-10-09 14:02:32 +00:00
f5fae9d016
Port of Sun3/Sparc zs driver from wrstuden@loki.stanford.edu
...
(Bill Studenmund). Should be massaged into machine independence
for 1.2.
1995-10-09 12:42:16 +00:00
ab16c2efa6
Remove unneeded RCS ids.
1995-10-09 08:07:37 +00:00
2d5f7a7b07
Pass correct number of arguments to hpibgo().
1995-10-09 07:57:43 +00:00
8096b83664
Eliminate soft segment descriptors; instead use a functional interface for
...
creating segment descriptors. Add the duplicate system call gate used by
BSD/OS 2.0 executables. Prototype setsegment() and setgate(), and fix a bogon
caught by this.
1995-10-09 06:34:11 +00:00
ad89dc6f0a
vtrace -> sys_vtrace
1995-10-09 04:33:52 +00:00
28b46fc9ec
Update vtrace() for prototype changes and renaming changes.
1995-10-09 04:00:24 +00:00
268dfe691c
update from Ezra Story <ezy@panix.com>
1995-10-09 03:47:44 +00:00
4e276bb0ec
update from osymh@gemini.oscs.montana.edu (Michael L. Hitch)
1995-10-09 02:41:28 +00:00
2c9db0e19e
update from Ignatios Souvatzis <is@beverly.rhein.de>
1995-10-09 02:14:46 +00:00
602e68be9d
new cybervision 64 grf from Bernd Ernesti <bernd@arresum.inka.de> and others
...
update config files (adding missing scsibus entry for aftsc0)
1995-10-09 02:08:35 +00:00
60e159d20e
file is now generated at compile time
1995-10-09 02:06:19 +00:00
0736074d04
Fix bugs in the turbochannel config table for MAXINE (personal decstation).
1995-10-09 01:45:26 +00:00
cc6ab4e68d
new cybervision 64 from Bernd Ernesti <bernd@arresum.inka.de> (and others)
1995-10-09 01:44:09 +00:00
ee06310cd7
moved videomode to ./usr/sbin
1995-10-09 00:53:19 +00:00
9318d50785
build grf_ultmscode.h
1995-10-09 00:12:54 +00:00
fa87e5bdfc
Minor cleanup re. Debugger() calls...
1995-10-08 23:48:22 +00:00
90af367f9e
Make arpintr() call conditional on NETHER
1995-10-08 23:47:34 +00:00
48500ffdd6
Add rd, xd, xy. Sort the includes.
1995-10-08 23:46:27 +00:00
0ed357402a
Fix a big "oops" (Many thanks to David Jones!)
1995-10-08 23:45:10 +00:00
3d587a6700
Link this -static
1995-10-08 23:44:02 +00:00
09cbbafa0a
Minor cleanup.
1995-10-08 23:42:58 +00:00
f5bcca1fab
Machine-dependent part of the new RAM-disk driver.
...
This module lets one build a stand-alone kernel.
1995-10-08 23:42:42 +00:00
1b6586b2bb
Note that this should be merged with dev/ic/i82586reg.h
1995-10-08 23:41:36 +00:00
13fa3c4fe6
Temporary hack to restrict open to root or the
...
same UID as the session attached to /dev/kd
1995-10-08 23:40:42 +00:00
2d50d2a6b9
Add RAMDISK, move some things around.
...
Add rd*, xd*, xy* (only rd is done).
1995-10-08 23:38:41 +00:00
81d650570f
Implement the KDGKBMODE ioctl for Linux (possible with pcvt 3.32).
1995-10-08 22:45:20 +00:00
9ba33c87cc
Update makefile to handle the fact that keycap.5 was moved out of man5
...
into this directory.
1995-10-08 21:59:43 +00:00
df99cef0ac
Patch from Frank van der Linden to allow kernels with pcvt but without
...
XCONSOLE to compile. I've been told that this patch has been sent to
Helmuth.
1995-10-08 21:57:39 +00:00
83dfe0816e
Remove the icode stuff; it hasn't been used in a long time.
1995-10-08 20:19:22 +00:00
a8637d68f8
blkclr -> bzero
1995-10-08 19:33:36 +00:00
1ad1d128e3
Fill in `ascent' values correctly.
1995-10-08 19:31:44 +00:00
09024536ef
Remove __main(), strlen(), bzero(), and bcmp(). They're all in libkern.
1995-10-08 19:30:51 +00:00
3b70bc6b37
Finish up the system call function renaming; sysarch -> sys_sysarch and
...
vtrace -> sys_vtrace.
1995-10-08 19:01:26 +00:00
685b9057c2
Pick up changes from leo's latest version.
1995-10-08 17:25:19 +00:00
0e5fe20560
- Cleanup the arbitration
...
- Make sure the MON_BUSY flag is cleared after a DMA transfer. Otherwise
we might end up with a 'lost-busy' situation unexpectedly. This will
prevent the 5380 from driving the bus, which is not funny during
reselections.
1995-10-08 13:34:23 +00:00
ecf1cf893d
Add forgotten `eeprom' configuration.
1995-10-08 11:45:39 +00:00
21a594651a
eeprom_match: account for differing physical addresses (per Jason Thorpe).
1995-10-08 11:44:59 +00:00
87a0c55d23
Patch from Jason to factor out a common framebuffer size determination
...
routine from the individual drivers.
1995-10-08 01:39:13 +00:00
95f29581c3
Remove files that have been removed from or renamed in the current pcvt sources
1995-10-07 23:25:09 +00:00
c078d7a9f4
Remove __builtin_saveregs().
1995-10-07 22:27:31 +00:00
6287d3d7b2
Remove bzero().
1995-10-07 22:24:50 +00:00
be0a951c76
Update our Makefile.inc.
...
Remove various OS-specific Makefile.inc templates.
1995-10-07 21:51:42 +00:00
d9789d4225
Overlay our pcvt with pcvt 3.32 sources. All of our fixes have been
...
incorporated into the master sources, so it is unnecessary to resolve
all the conflicts that would occur if we let CVS "merge" the versions.
1995-10-07 21:43:25 +00:00
68b7d2aca6
import pcvt 3.32
1995-10-07 21:11:27 +00:00
652374b8ca
import pcvt 3.32
1995-10-07 21:10:55 +00:00
81c0777f62
import pcvt 3.32
1995-10-07 21:09:43 +00:00
16ca402101
update from Ignatios Souvatzis <is@beverly.rhein.de>
1995-10-07 19:54:58 +00:00
79bc0aa5ef
transpose osc values from Ignatios Souvatzis <is@beverly.rhein.de>
1995-10-07 19:48:08 +00:00
86fb4819e2
change break val from rhealey@kas.helios.mn.org (Rob Healey)
1995-10-07 18:22:14 +00:00
cf0e52a427
update to 2232 from Jukka Marin <jmarin@teeri.jmp.fi> and
...
rhealey@kas.helios.mn.org (Rob Healey)
1995-10-07 18:18:26 +00:00
dc3b9221a6
update to ariadne ethernet device from Bernd Ernesti <bernd@arresum.inka.de>
1995-10-07 18:12:42 +00:00
c68476241f
new quicknet ethernet driver from Kortelainen Mika <k125374@cs.tut.fi>
1995-10-07 18:04:27 +00:00
a9c89668da
fixes for fastlane from Daniel Widenfalk <t94dwi@student.tdb.uu.se>
1995-10-07 17:33:01 +00:00
245f292fed
Prefix names of system call implementation functions with `sys_'.
1995-10-07 06:25:19 +00:00
037949ced9
Undo accidential deletions in last commit.
1995-10-06 07:12:42 +00:00
f2d15e5b48
Remove unneeded input operands to fnsave(), fnstcw(), and fnstsw().
1995-10-05 23:06:15 +00:00
45dc3570ec
Use ISA_IPL_TTY, to fix race conditions.
1995-10-05 22:06:47 +00:00
48849279bf
Script to assist installing second-stage boot programs.
1995-10-05 21:03:12 +00:00
ec30c873ea
Switch the AUX_ENABLE and AUX_DISABLE flags, per Mathias Engan.
1995-10-05 14:12:21 +00:00
aea329df61
rcons: rc_maxcol and rc_maxrow were swapped.
1995-10-05 13:16:57 +00:00
5dcc668ebd
first attempt at A4000T support, remove GRF_AGA's dependence on GRF_ECS.
...
page 0 is now invalid, other minor cleanup.
from osymh@gemini.oscs.montana.edu (Michael L. Hitch)
1995-10-05 12:40:48 +00:00
58f950c48a
Only enable timeouts (debugging) when actually transfering data.
...
from osymh@gemini.oscs.montana.edu (Michael L. Hitch)
1995-10-05 12:36:07 +00:00
7d3bc89420
Get in sync with the mac68k version to incorporate Allen Briggs' changes
...
- emit MSG_ABORT/MSG_REJECT at the right times:
- make MIN_PHYS machine dependent.
1995-10-05 08:52:53 +00:00
c2ca33b9c1
Initialize the kernel PT map as thoroughly in the 68040 case as the
...
non-68040 case. Fix up a comment there, too.
1995-10-05 06:54:12 +00:00
a6359b2633
Fix segment table reference bug, from Micheal Hitch.
1995-10-05 06:47:25 +00:00
37d37e0791
Change the pmax framebuffer driver to reflect the rcons changes as negotiated
...
with pk:
Use dev/rcons/files.rcons in the pmax config file.
Use "rasterconsole" as the tag in pmax/conf, and modify the pmax
framebuffer pseudo-device drivers (fb and rcons) to us rasterconsole.h and
RASTERCONSOLE for compile-time configuration of the rcons pseudo-device.
Modify the pmax rcons pseudo-device driver to initialize a little-endian,
QVSS-compatible font (set its ascent, and set the rconsole structure to
point to that font) before calling rcons_connect().
Tested on a cfb. The ascent may be wrong (or at least, not be aligned with
the hw cursor sprite) on a 3100.
1995-10-05 01:52:44 +00:00
c8f10b184c
Do not set `ra_len' in bwtwomatch(); we only need the pixels for CONSOLE,
...
but if so, we need the lot.
1995-10-05 00:33:23 +00:00
de0c6a97bd
RCONSOLE => RASTERCONSOLE.
1995-10-05 00:26:07 +00:00
c1e313b122
include `files.rcons'.
1995-10-05 00:21:35 +00:00
b79dc038d5
Machine dependent RASTERCONSOLE font definition to be passed to rcons_init().
1995-10-05 00:02:54 +00:00
859b799130
RCONSOLE => RASTERCONSOLE
1995-10-04 23:44:33 +00:00
d19cacbb03
RCONSOLE => RASTERCONSOLE.
1995-10-04 23:35:13 +00:00
e43d278d31
Several changes:
...
* Reset the card on "fresh open" as a sanity measure.
* Use the "secret bit" to enable interrupts.
* Make some parts look/behave like their cousins in dev/isa/com.c
* Set the FIFO threshold based on line speed.
* Be a little more informative when port is attached.
* Implement TIOC{G,S}FLAGS; ttyflags now works.
First two items prevent deadlock on some systems (notably the 380,
425, and 433) which some people have been reporting. Use of the
"secret bit" seems to be safe on systems which don't need it. Changes
tested on a 319, 340, 345, and 380.
1995-10-04 17:46:08 +00:00
5479e941d9
Add a second ppp. It makes the kernel a whole 8 bytes larger on disk.
1995-10-04 11:05:25 +00:00
442aff9376
Say what I really meant in a printf()...
1995-10-04 08:39:14 +00:00
b675177228
Put new-style RCS ids in the startup banner. Makes bootblock revisions
...
much easier to recognize; old method could have revision corrupted by
local RCS control.
1995-10-04 07:24:31 +00:00
d08330454a
Determine the select code of the console device, or -1 for internal grf.
...
Pass this value to the kernel in register d5. This value isn't currently
used by the kernel, but will be in the future.
1995-10-04 06:54:42 +00:00
f060c456de
Couple of changes:
...
* Implement TIOC{G,S}FLAGS; ttyflags works now.
* Reset the card on a "fresh open" as a sanity measure.
* Make dcmopen() and dcmclose() a little more like the
corresponding routines in the new dca.c
1995-10-04 06:39:06 +00:00
8ede165771
ae0 -> ae* and add a couple of vnd devices.
1995-10-04 03:42:18 +00:00
6e435f9152
Include ether.h to get NETHER.
1995-10-04 03:38:27 +00:00
dad96c6619
Add a few constants used for mapping bit and pieces in the kernel driver.
1995-10-04 00:21:27 +00:00
be8ef88444
Raise number of bpfs to 12 since CAP needs a minimum of 8.
1995-10-03 20:19:01 +00:00
4a17d4a861
Undo accidental deletions in last commit.
1995-10-03 20:18:58 +00:00
32c023995c
Bring reset logic into interrupt state machine.
1995-10-03 17:32:12 +00:00
fcc53878ca
Make fbrcons_init() resistant against SUN4s.
1995-10-02 21:48:21 +00:00
cfbe993b9b
Update to use <machine/cgtworeg.h>
1995-10-02 21:44:51 +00:00
38d1101ad3
Silly me.. there's already a <machine/cgtworeg.h>
1995-10-02 21:44:22 +00:00
fb58a99a8f
Fix some bogus calls to {read/write}disklabel().
1995-10-02 21:04:45 +00:00
e3e007e87c
#include "sys/mount.h" added.
1995-10-02 12:33:32 +00:00
1ddc4223b1
Add offset to mac68k_vidlog as suggested by chas@ohm.nrl.navy.mil.
1995-10-02 09:41:06 +00:00
633e32000c
Wrap call to arpintr() in NETHER to avoid unresolved external if no ether
...
devices are present. Suggested by Paul Goyette (paul@pgoyette.bdt.com ).
1995-10-02 09:38:38 +00:00
82434458cc
Get some of the bugs out. Thanks to David Gilbert for testing.
1995-10-02 09:07:03 +00:00
d510375b06
Change to allow nack_message() to take an argument and send
...
MSG_REJECT_MESSAGE instead of MSG_ABORT when we get an extended message.
This allows a DEC drive to work when it attempts to negotiate synch.
transfers on us.
1995-10-02 09:03:53 +00:00
d7b36ab7a2
Add mt0.
1995-10-02 00:36:07 +00:00
f12fd2307e
Driver for HP 7974a, 7978a/b, 7979a, 7980a, and 7980xc 9-track HP-IB tapes.
...
Original version contributed to Utah by Mt. Xinu. Ported to 4.4BSD by
Mark Davies and Andrew Vignaux.
1995-10-02 00:28:20 +00:00
01d63931a5
only use one xmit buffer for ASDG
1995-10-01 19:30:22 +00:00
0066d1a66f
Finally get this right... Final fix from Paul Goyette paul@pgoyette.bdt.com
1995-10-01 05:10:20 +00:00
9de2a25e73
Surround Debugger(); with #if DDB. Different fix than encl. for PR#1553.
1995-10-01 02:29:32 +00:00
13dcbfbb29
Make this work with OBJ dirs.
1995-09-30 21:43:35 +00:00
c1138ce68a
Yet another error in the (next-to) last changes.
1995-09-30 21:34:54 +00:00
160b38697c
Refer to installboot(8)
1995-09-30 21:33:30 +00:00
a029979ad3
Manual page for installboot(8).
1995-09-30 21:32:14 +00:00
890baf19ea
Fix stupid error in one of my last changes here.
1995-09-30 19:42:34 +00:00
35c3bd0da2
fix typo
1995-09-30 17:43:18 +00:00
672febd322
add conditionals around page zero debug stuff
1995-09-30 17:39:51 +00:00
678433e279
no longer needed by lance driver (now uses /dev/ic...)
1995-09-30 17:20:29 +00:00
f144360393
oops, forgot to cvs add this
1995-09-30 17:18:22 +00:00
1c107bd3e6
Add CD9660 option.
1995-09-30 12:48:12 +00:00
d6ede49c3d
fix typo (pr#1224)
1995-09-30 08:39:38 +00:00
852aa19159
add arcnet device, (pr#1148)
1995-09-30 08:34:49 +00:00
46b055b6dc
some style cleanup
1995-09-30 02:08:47 +00:00
5295a0c32a
add msc device
1995-09-30 01:54:00 +00:00
21575d71a5
changes for msc device
1995-09-30 01:52:37 +00:00
1683d8a23e
new 2232 multiport serial device from:
...
Rob Healey <rhealey@kas.helios.mn.org>, Jukka Marin <jmarin@teeri.jmp.fi>,
Timo Rossi <trossi@jyu.fi> and Zik
1995-09-30 01:50:50 +00:00
8945da0c58
Add speed entries for 7200 and multiples.
...
Add as-yet-unused speed entries for a 1x SCC clock, up to 200 Kbits.
Remove old top-bit-means-delay code, since nothing seems to need it,
and it apparently partially broke lk-201 initialization anyway.
1995-09-29 21:55:19 +00:00
ae1b64d888
Fix btoc()/ctob() typo in reading physical memory that stopped ps
...
from reading process argument lists.
Allow kernel-virtual memory reads to read the message buffer, since
dmesg needs it.
1995-09-29 21:53:29 +00:00
0b4e25a2c1
Arg to printf forgot.
1995-09-29 16:35:00 +00:00
24d550bffb
Some typos.
1995-09-29 16:33:38 +00:00
319c531354
move 040 to hp300 style, use new MI lance ethernet driver
...
a few minor fixes WRT prototypes.
if_le from Charles rest from osymh@gemini.oscs.montana.edu (Michael L. Hitch)
1995-09-29 13:51:30 +00:00
eab73b27b1
fix wrong arg to strncpy
1995-09-29 13:11:21 +00:00
c9836835f4
Make it as lean as possible.
1995-09-29 04:16:48 +00:00
b543578236
Add a missing "nop" in a delay slot in the floating-point exception
...
handler. Gradual underflow and fp emulation now work correctly.
Proper denorms also fix strtod() inaccuracies and Gcc's "enquire" program.
1995-09-28 20:02:50 +00:00
d7992eb61f
Update to correct load address.
1995-09-28 08:13:29 +00:00
d73008fe8b
Always announce it when loading miniroot.
1995-09-28 04:17:24 +00:00
b1d771eeb5
Simplify nubus interrupt routines a bit.
1995-09-28 04:11:18 +00:00
a9f0a2f9c4
Fix PR 1514 from Walter Ruetten.
1995-09-28 03:15:54 +00:00
691b9f2bfa
Avoid reading the filesystem superblock in bootxx; all info now prepared
...
by installboot (per Gordon Ross).
1995-09-27 09:03:13 +00:00
5a0bebbc54
Patch from Theo to finish clearing 040 kernel page tables.
1995-09-27 04:16:54 +00:00
232169396a
Bullet-proof a little.
...
Make some more pdma code conditional on USE_PDMA.
Handle transfers of size > MIN_PHYS.
1995-09-27 03:38:57 +00:00
995b4710b8
Correct mapinfo for Multibus PROM devices.
1995-09-26 21:30:19 +00:00
50201d2bb5
Fix comment, add copyright.
1995-09-26 21:29:25 +00:00
03fa08025b
Major update: Many changes from Matthias Pfaller.
...
* conf/DEFAULT: new file, default install kernel
* conf/INSTALL: +MSDOSFS, +NO_INLINE_SPLX, +RD_SIZE=2mb, +scn4/5
* conf/KLONDIKE: cosmetic changes
* conf/STEELHEAD: cosmetic changes
* conf/files.pc532: rd got a file of it's own
* dev/lpt.c: changes to support lower interrupt latency, packet input/output
is now done at spl0
* dev/ncr.c: changes to support the most recent atari version of the ncr5380
driver
* dev/ncr5380.c, dev/ncr5380reg.h: upgraded to most recent atari version,
memcpy -> bcopy.
* dev/rd.c: ramdisk driver
* dev/scn.c: by patching scndefaultrate, the kernel's default baud rate can
be changed with gdb
* include/psl.h: struct iv now protected by !LOCORE && _KERNEL
inlining of splx can be prevented with new kernel option NO_INLINE_SPLX
splx_di is like splx but leaves processor interrupts disabled
* pc532/autoconf.c: cosmetic changes
* pc532/conf.c: with rd entries
* pc532/intr.c: changes to support splx_di
* pc532/locore.s: ramdisk is no longer initialized
not splx, but rett is now used to reenable CPU interrupts when leaving the
interrupt service routine. This is necessary to prevent recursive interrupts.
* pc532/sys_machdep.c: memcpy -> bcopy
* pc532/mem.c: moved ramdisk to dev/rd.c
* stand/Makefile: boot is now loaded at 0x3eb800 instead of 0x363800
Use current form of libsa and libkern.
* stand/inflate.c: emit twiddle every 8k and not every 1k
* stand/rd.c: ramdisk starts at 0x288000
1995-09-26 20:15:57 +00:00
b3ecc4c310
make sure devopen() sets pd->devtype properly when BOOTXX is defined
...
(should be DT_BLOCK). otherwise the bootxx boot block will fail if
you are on a system with a v2 openprom [because it will not do the
v2_seek in obp_strategy()]. fixes the problem recently noted on
the port-sparc list by matthew green <mrg@eterna.com.au>. i tested
fix on a ss2 with a v2 prom.
1995-09-26 20:07:53 +00:00
3c868e07f9
New DVMA interface, and various cleanup.
1995-09-26 04:01:53 +00:00
48fc6c37a0
Correct child_return() so child is charged for its cpu time.
1995-09-26 03:53:46 +00:00
f33cf7c909
Correct cgtwo address.
1995-09-25 22:33:37 +00:00
f28ebc66ca
Fix SCC bug that broke getty on pmax SCC lines: if RAW and LITOUT were
...
both off, haracters with their top bit clear were interpreted as a delay.
This (strange) behaviour is still available if SCC_PARITY_MEANS_DELAY
is defined.
1995-09-25 22:10:56 +00:00
95a27d405b
Update pmax kernel to compile with -Werror:
...
update MAXINE desktop bus driver to pass a softc to interrupt
handler. The softc is still statically allocated.
1995-09-25 21:12:33 +00:00
ed4d846a84
Update pmax kernel to compile with -Werror:
...
Add prototypes to the driver switch for old-style 4.4bsd/pmax device drivers
(i.e., the old pmax SCSI drivers).
1995-09-25 21:10:03 +00:00
51d59ca152
Update pmax kernel to compile with -Werror:
...
Fix the initializer of the prom bootinit() function, to take a char* that's
(presumably) the name of the file to boot -- even though it's not used.
1995-09-25 21:06:29 +00:00
cd887a9930
Add "kvtophys()", which maps MIPS R2000 kernel-virtual addresses to physical addresses,
...
so they can (e.g.) be written to DMA mapping registers.
1995-09-25 20:36:23 +00:00
b47de9fb69
new "xy" disk device driver from me.
...
the "xy" driver runs Xylogics 450/451 SMD disk controllers.
1995-09-25 20:35:14 +00:00
06bd2712e9
Update pmax kernel to compile with -Werror:
...
Update TURBOChannel and ioasic interrupt-establish routines to pass on their
device argument as a "void *", since that's how all the pmax interrupt handlers
are declared.
1995-09-25 20:33:26 +00:00
25563b1f82
add config info for "xy" xylogics 450/451 driver
1995-09-25 20:27:30 +00:00
8d19642cd6
add "xy" xylogics 450/451 config stuff
1995-09-25 20:20:27 +00:00
1779adf6be
minor cleanups:
...
- don't let pcyl go unassigned if we have a non-sunos disklabel.
if nothing else, guess pcyl = ncyl + acyl.
- don't use bogus disklabel data if disk label is invalid
(xdgetdisklabel() now returns if label was ok or not).
- move xddriver decl. before start of actual code (cleanup).
1995-09-25 20:12:44 +00:00
2aff99a206
bug fix: xddummystrat() was clearing all but B_BUSY when it should
...
have been clearing just B_BUSY (s/B_BUSY/~B_BUSY/). this
fixes hard hang when reading disklabel when booting system.
minor clean up: added a few prototypes and only fool with bootpath
if booting the system (in xdattach).
1995-09-25 16:02:09 +00:00
27361456c5
Force a delay after calling SCC_WRITE_DATA() to give the chip
...
registers time to settle. DELAY(2) is reportedly enough. Without the
delay, output characters are occasionally doubled.
1995-09-25 04:30:43 +00:00
7bb66692c0
Add fine-grain clock code which uses the 25 MHz TURBOChannel bus-cycle
...
counter on 5k/240s to interpolate to microsecond-resolution clock
in microtime(). Only the "rev B" ASIC in 5k/240s is known to have
this counter; other models may or may not. This gives microsecond
resolution at user-level, and up to 40ns resolution (modulo the
nominal 5(?) 40MHz cpu cycles for reads to complete) in the kernel.
Change the IOASIC reset function to set up the DMA mapping for the
53c94. Allocate 16 Kbytes of DMA buffer for 53c94 ASCs under an IOASIC,
as the 3MAX baseboard and TC options have 128 Kbytes of static
bounce buffer, and the drivers really _should_ support 16Kbyte
I/O requests. (They don't always.)
Give the LANCE a hard reset on 5k/240s, just to be on the safe side.
(the 5k/240 I use sometimes reported errors at boot time.)
1995-09-25 04:21:01 +00:00
462ef77234
Use the new "struct rconsole"; changes I apparently forgot to commit with
...
pmax/dev/fb.c.
1995-09-24 23:13:00 +00:00
825bd034de
Move pseudo swap block device to major 4 to make way for `xy'.
1995-09-24 20:45:27 +00:00
4d52f57876
Add Technology Works ethernet card. From
...
Kazunari Nakamura <kazu@nkk.co.jp>.
1995-09-24 14:13:56 +00:00
a33b9f4fdb
Assume primary swap is `b' partition, not `root partition + 1'.
1995-09-24 02:18:11 +00:00
4408ec71bf
init bad144 table before we actually try and read anything from the
...
disk, rather than init'ing after reading block 0 [in case we get an
error reading block zero].
1995-09-24 00:27:59 +00:00
44561deb01
Add support for the FX-card - Falcon mem. extension - (Nat!)
1995-09-23 20:31:21 +00:00
7af927b56d
Make sure the prototypes and inline definitions are included.
1995-09-23 20:29:16 +00:00
afea10f476
Correct mapping for new (iso-8859-1) fontsets (Thomas Gerner).
1995-09-23 20:27:15 +00:00
f28a41635b
Make them compliant to iso-8859-1 (Thomas Gerner).
1995-09-23 20:25:34 +00:00
c150cc4d37
PROF -> GPROF
1995-09-23 20:23:28 +00:00
e44fc4282e
Use -msoft-float as suggested by Gordon Ross.
1995-09-23 20:22:01 +00:00
3810bc32eb
Compile the system installation program and install it in /usr/mdec/rbootd
...
as SYS_INST.
1995-09-23 17:40:54 +00:00
a8c323442d
Add a standalone system installation program. Currently implements:
...
* Prompt user for disklabel information and label disk.
* Copy miniroot image from NFS server to `b' partition.
* Boot kernel in miniroot image into single-user mode.
Hooks for tape support are there, but the meat for that isn't implemented yet.
1995-09-23 17:38:51 +00:00
a35f639de0
If compiled for the system installation program, prompt for myip, gateip,
...
netmask, serverip, and path rather than using rarp/bootparam.
Catch up with libsa changes.
1995-09-23 17:31:10 +00:00
d429f2e11f
Re-arrange a mite; for the system installation program. Catch up with libsa
...
changes.
1995-09-23 17:28:11 +00:00
188f6e6912
Add *close() routines. Basically, zaps softc structure so that partition
...
information will be re-loaded upon next open.
Catch up with libsa changes.
1995-09-23 17:19:58 +00:00
b8e9fb1b0b
Catch up with libsa changes.
1995-09-23 17:17:03 +00:00
2572267bae
relocation_info added.
1995-09-23 14:57:40 +00:00
96163f6aa5
fix typo
1995-09-23 13:42:03 +00:00
40a6506694
add memcpy entry
1995-09-23 08:14:36 +00:00
23ee56022d
Cleanup, and catch up with libsa changes.
1995-09-23 03:42:17 +00:00
13d9b9d700
Sync up with the sparc version.
1995-09-23 03:40:28 +00:00
e23598f24f
Much improved pdma transfers.
...
Still not nearly as fast as FWB's drivers under the MacOS.
Uses the "blind" transfer method instead of polled pdma.
1995-09-23 01:11:42 +00:00
21f7aa38f6
Update the pmax rcons pseudo-device driver to work with the sys/dev/rcons
...
version of rconsole.
1995-09-22 23:48:20 +00:00
7ed7d6148f
Move the C struct to the properly protected place.
1995-09-22 23:19:30 +00:00
42662e7b9c
Need <sys/mount.h>
1995-09-22 15:29:33 +00:00
f03897c2b6
"Oops." Get the declaration of sys_arch() correct.
1995-09-22 15:27:10 +00:00
d1234038d4
Rename the force-all-pending-writes to memory function to wbflush().
...
Keep the old Mach-derived name "MachEmptyWriteBuffer()" as an alternate
entry point.
1995-09-21 23:28:31 +00:00
7c36f209e7
Need <sys/mount.h> now.
1995-09-21 22:26:04 +00:00
fc919965e8
Make sunos_sigreturn() match prototype.
1995-09-21 11:41:04 +00:00
01be7f2b8c
Need sys/mount.h for fhandle_t.
1995-09-21 11:27:43 +00:00
4a9cf8407c
Fix a warning.
1995-09-21 11:13:27 +00:00
ddf9c6da16
Add 4 vnds to each, add 4 ccds to GENERIC, update BASALT to match
...
current reality.
1995-09-21 07:27:52 +00:00
fbd9919364
Fix warning and use __P for prototypes.
1995-09-21 03:36:25 +00:00
b895726b5c
MACCCLASSIC is Color classic. And it's more like an LC than hopeless.
1995-09-21 01:56:31 +00:00
0641f09bfb
Include <sys/mount.h>, as the new <sys/syscallargs.h> won't compile without it.
1995-09-20 23:33:25 +00:00
de36f970fb
Fix a few oversights. From Walter Ruetten <walter@ghpc8.ihf.rwth-aachen.de>
1995-09-20 13:03:21 +00:00
2991316b06
Remove unecessary references to arch/sparc/rcons/raster.h, and some other lint.
1995-09-20 05:36:13 +00:00
3589d052f0
Add gory debugging, because I don't have access to a MAXINE to test
...
the baseboard framebuffer driver with rcons and it reportedly didn't work.
1995-09-20 05:19:54 +00:00
d0c0f7f738
Fix initialization of MAXINE xcfb as console.
1995-09-20 05:13:06 +00:00
df58dc7d89
Change the signature of interrupt-handlers to take a void *
...
(a pointer to the softc) and return an int (indicating spurious
interrupts or other conditions.)
1995-09-20 04:33:00 +00:00
3253873a9e
Use `files.ultrix'
1995-09-20 00:25:44 +00:00
03c87b6ebc
Use `files.osf1'
1995-09-20 00:20:18 +00:00
a11f0c987e
Compile kernel with -Werror and -fno-builtin.
1995-09-19 23:57:55 +00:00
970f736653
Compile the kernel with -Werror -fno-builtin.
1995-09-19 23:54:29 +00:00
c9dfdd20b6
Compile the kernel with -Werror and -fno-builtin.
1995-09-19 23:48:41 +00:00
ad05d707bf
Compile the kernel with -fno-builtin.
1995-09-19 23:34:06 +00:00
2d61359f60
Compile the kernel with -Werror and -fno-builtin.
1995-09-19 23:33:12 +00:00
5ac5b98a9c
Compile the kernel with -Werror and -fno-builtin
1995-09-19 23:32:21 +00:00
065ee11549
Compile the kernel with -Werror and -fno-builtin.
1995-09-19 23:30:54 +00:00
a7417b3ca6
Compile the kernel with -fno-builtin.
1995-09-19 23:28:06 +00:00
b903d705da
Compile the kernel with -Werror and -fno-builtin.
1995-09-19 23:26:58 +00:00
bca85a86b1
Compile the kernel with -fno-builtin.
1995-09-19 23:25:29 +00:00
7d7396c414
Make system calls conform to a standard prototype and bring those
...
prototypes into scope.
1995-09-19 22:53:47 +00:00
516ddf511f
Wrap only the message in ifdef DIAGNOSTIC.
1995-09-19 03:18:15 +00:00
c030fa6ef2
Install in /usr/mdec
1995-09-18 23:33:42 +00:00
aa41c30406
Don't strip bootxx on installation.
1995-09-18 23:32:41 +00:00
4025edc861
Make this compile again by calling readdisklabel() with a dummy strategy routine.
...
XXX - need some reorganization to this from xdopen().
1995-09-18 23:26:39 +00:00
371dd67d56
sync filesystems just prior to writing the bootblocks to the raw device.
1995-09-18 22:36:19 +00:00
974115eb54
Adapt to libsa changes & some other minor nits.
1995-09-18 21:31:44 +00:00
05f929580f
read superblock into &sblock rather than LOADADDR. we can't read
...
into LOADADDR because it can't be mapped into DVMA space. this fixes
a dvma panic on a sun4 boot from an xd disk.
1995-09-18 20:24:53 +00:00
24ba08adca
Fixed RELOC's to be hex numbers (as expected) rather than decimal.
...
(e.g. s/340000/0x340000/). Fixes DVMA panic on my sun-4/280 when
booted diskless.
1995-09-18 19:52:15 +00:00
pk