Commit Graph

243 Commits

Author SHA1 Message Date
chs ac3bc537bd eliminate the KERN_* error codes in favor of the traditional E* codes.
the mapping is:

KERN_SUCCESS			0
KERN_INVALID_ADDRESS		EFAULT
KERN_PROTECTION_FAILURE		EACCES
KERN_NO_SPACE			ENOMEM
KERN_INVALID_ARGUMENT		EINVAL
KERN_FAILURE			various, mostly turn into KASSERTs
KERN_RESOURCE_SHORTAGE		ENOMEM
KERN_NOT_RECEIVER		<unused>
KERN_NO_ACCESS			<unused>
KERN_PAGES_LOCKED		<unused>
2001-03-15 06:10:32 +00:00
matt af212d3fda Use common switch / setfault / trampoline code. (except amigappc because
it doesn't use trap_subr.S either).
2001-02-25 20:34:24 +00:00
matt e7811ad9b6 Move cpu_sysct and dump{mag,lo,siz} & cpu_dumpconf to powerpc_machdep.c.
dumpsys is still port-specific for now.  XXX dumpsys is still a stub
on all powerpc ports.
2001-02-24 22:39:16 +00:00
matt 45f666cb9d Remove setregs since it now lives in powerpc/powerpc/powerpc_machdep.c 2001-02-24 04:35:33 +00:00
manu 3c98a504b9 Added previously created files for powerpc Linux compatibility to the kernel
config system
2001-01-19 01:51:16 +00:00
tv e58532a4bf No-op commit to force update to a non-"-kk" revision. 2001-01-18 17:47:58 +00:00
thorpej 1fa7cb5b74 Use <powerpc/psl.h> 2001-01-18 15:30:42 +00:00
ws dc77af8bea Don't claim the memory for the executable from the firmware.
Some implementations seemed to do strange mappings as a result of it.
2001-01-17 15:37:06 +00:00
ws 8d2ba0ce39 Increase stack size to make this work again. 2001-01-17 15:31:04 +00:00
fvdl c7f1462f3e Add machdep file for procfs. Currently only used for linux-style
/proc/cpuinfo (only active when procfs is mounted with -o linux).
For ports other than the i386 this currently produces an empty
string.
2001-01-17 00:07:18 +00:00
thorpej d74e432ed3 Make softclock a generic soft interrupt of the API is available,
adding the requisite void * argument to softclock().
2001-01-15 20:19:50 +00:00
thorpej d85a75f583 Make sure everybody has an splvm() and equate it with splimp() (splimp()
is the historical name for this interrupt level, and the historical name
is going to go away in the near future).
2001-01-14 02:00:37 +00:00
bouyer c71f40d166 Add pseudo-device vlan 2000-12-19 10:42:02 +00:00
jdolecek cacec11253 delete obsolete comment 2000-12-17 15:52:39 +00:00
mycroft 3418812d3c Partial syscall cleanup, as per other ports. 2000-12-14 10:33:42 +00:00
tsubai 1b4a9cb335 Move INTSTK and SPILLSTK definitions to locore.[Ss] to allow allocation of
them in early startup.
2000-12-04 17:05:50 +00:00
chs c62d17a551 rationalize the use of b_flags for geteblk() buffers.
rather than assigning to the whole field, set or clear individual flags,
which implies that the B_BUSY and B_INVAL flags will remain set.
this allows us to make the assertion in brelse() that B_BUSY is set,
which is the purpose of all this.
2000-11-20 08:24:08 +00:00
thorpej 40460ae8eb Need to provide CACHELINESIZE in _STANDALONE environments, too. 2000-11-16 19:02:33 +00:00
thorpej d96bb89daf Use <powerpc/powerpc/trap_subr.S> 2000-11-16 05:34:03 +00:00
thorpej eb04d01500 Add an lcsplx() ("splx for locore") like the other PowerPC ports
have.  This will allow us to share locore code with them.
2000-11-16 01:56:05 +00:00
matt dbe8de94a8 back out my change powerpc/conf/files.ofw. Enable the inclusion of
dev/ofw/files.ofw on macppc.  Add openfirm to ofppc/conf.c
2000-11-15 00:39:31 +00:00
thorpej 45804ccf0e A respectable GENERIC, loosely based on the macppc GENERIC. 2000-11-14 06:01:09 +00:00
itojun 9e47af8814 enable rnd device. they are now mandatory for ssh/sshd support,
so it makes more sense to enable it.
please disable them if there's any issues, but in that case, in-tree
ssh/sshd won't work.
2000-10-04 03:35:53 +00:00
jdolecek b1f94e26ab don't specify number of ptys if >= 16 (current default initial number)
pty comments: normalize and g/c what is no longer relevant
2000-09-24 15:59:26 +00:00
jdolecek 49c105ffdb add new macro BOOT_FLAG() (defined in <sys/boot_flag.h>) - this
maps standard boot flags to corresponding RB_* values
use BOOT_FLAG() in port's MD code as appropriate

as discussed on tech-kern, add new boot flags -v, -q for booting
verbosely or quietly, and corresponding AB_VERBOSE/AB_QUIET
boot flags; also add FreeBSD-compatible bootverbose macro and
NetBSD-specific bootquiet macro

for hpcmips, use new bootverbose instead of it's own hpcmips_verbose

Tested on i386, and to limited extend (compile of affected files) also for
mvme68k, hp300, luna68k, sun3.
2000-09-24 12:32:31 +00:00
thorpej 72a24b4eae Add an align argument to uvm_map() and some callers of that
routine.  Works similarly fto pmap_prefer(), but allows callers
to specify a minimum power-of-two alignment of the region.
How we ever got along without this for so long is beyond me.
2000-09-13 15:00:15 +00:00
thorpej 4db6fc7542 Make need_resched() take a "struct cpu_info *" argument. This
causes gives a primitive form of processor affinity.  Its use in
roundrobin() still needs some work.
2000-08-25 01:04:06 +00:00
thorpej 58e7a6954b Add spllock(). See spl(9) for details. 2000-08-22 19:46:26 +00:00
tsubai 365ec2aa42 Scheduler locking changes. 2000-08-21 18:46:03 +00:00
thorpej 23a7f255d4 Make sure we provide splsched() as described in spl(9). 2000-08-21 02:06:31 +00:00
itojun 85dda25e94 move "options PULLDOWN_TEST" into sys/sys/mbuf.h (in #ifdef _KERNEL),
as it is no wthe default setting for everyone.

the reason we still use the name "PULLDOWN_TEST" while it is now default:
kame code sharing.
2000-08-13 01:31:15 +00:00
jdolecek 3d73ef5a2b convert to use conf/newvers_stand.sh, minor Makefile adjustments 2000-08-07 22:38:10 +00:00
mason 4a353b5330 Moving to a default of 64 PTYs. 2000-07-27 17:53:35 +00:00
cgd a5c13f9ad4 Kwality control:
* put #includes of opt headers and headers to get protos used by
  net/netisr_dispatch.h in net/netisr.h (if !defined(_LOCORE)) (rather than
  in netisr_dispatch.h itself, and potentially nowhere, respectively).
* require netisr.h to be included before netisr_dispatch.h.
* minor additional cleanup of both netisr.h and netisr_dispatch.h.
* clean up uses to remove now-unnecessary header file inclusions, and
  local prototypes of the fns.
* convert netisr dispatch implementations which didn't use
  netisr_dispatch.h (pc532) to use it.
2000-07-02 04:40:33 +00:00
itojun d738f90fd7 raise MSIZE from 128 to 256.
- for sizeof(void *) == 8 arch, this is mandatory.  MHLEN is too small
  already (less than 80) and there are chances for unwanted packet loss due
  to m_pullup restriction.
- for other cases, the change should avoid allocating clusters in most cases
  (even when you have IPv4 IPsec tunnel, or IPv6 with moderate amount of
  extension header)

portmasters: if your arch chokes with the change (high memory usage or
whatever), please backout the change for your arch.
2000-06-30 17:55:11 +00:00
itojun d76ae83df8 add PULLDOWN_TEST for all the platforms.
XXX should be moved to somewhere else when stabilized
2000-06-30 17:10:15 +00:00
mrg fa00dc597a remove include of <vm/vm.h>. <vm/vm.h> -> <uvm/uvm_extern.h> 2000-06-29 07:44:02 +00:00
kleink e695f72a2e Add <machine/int_types.h>, which provides namespace-pure definitions
of exact-width integer types.
2000-06-26 15:42:16 +00:00
mrg 2f159a1bac remove/move more mach vm header files:
<vm/pglist.h> -> <uvm/uvm_pglist.h>
	<vm/vm_inherit.h> -> <uvm/uvm_inherit.h>
	<vm/vm_kern.h> -> into <uvm/uvm_extern.h>
	<vm/vm_object.h> -> nothing
	<vm/vm_pager.h> -> into <uvm/uvm_pager.h>

also includes a bunch of <vm/vm_page.h> include removals (due to redudancy
with <vm/vm.h>), and a scattering of other similar headers.
2000-06-26 14:20:25 +00:00
fvdl 1ee7d22c0b Remove prefix construction for softdeps. Add SOFTDEP option to GENERIC. 2000-06-22 20:27:49 +00:00
tsubai 1d8c57a8e5 Need include <vm/vm.h>. 2000-06-20 08:04:35 +00:00
veego 223d7455c7 Remove the obsolete config fragments for kernel crypto, because the IPsec
crypto code is now in the kernel source tree.
2000-06-14 22:02:13 +00:00
tsubai 1bfa0fc6b6 Add cpu_counter(). 2000-06-11 16:32:42 +00:00
matt 9169d99f2a Don't pass booted_* to findroot/getdevice, access them via the globals.
Also, make findroot static.  This eliminates unneeded clearing of them
and make their use consistent among the ports.
2000-06-01 15:38:20 +00:00
matt c9aff328d9 Make booted_device global (and booted_parition for consitency).
Eliminate it from header files and other extern definitions.
2000-06-01 00:49:49 +00:00
thorpej 8c2d00aaeb Add a comment about needing to initialize p_cpu when multiple
processors are supported.
2000-05-31 05:09:14 +00:00
thorpej a7d0570e67 First sweep at scheduler state cleanup. Collect MI scheduler
state into global and per-CPU scheduler state:

	- Global state: sched_qs (run queues), sched_whichqs (bitmap
	  of non-empty run queues), sched_slpque (sleep queues).
	  NOTE: These may collectively move into a struct schedstate
	  at some point in the future.

	- Per-CPU state, struct schedstate_percpu: spc_runtime
	  (time process on this CPU started running), spc_flags
	  (replaces struct proc's p_schedflags), and
	  spc_curpriority (usrpri of processes on this CPU).

	- Every platform must now supply a struct cpu_info and
	  a curcpu() macro.  Simplify existing cpu_info declarations
	  where appropriate.

	- All references to per-CPU scheduler state now made through
	  curcpu().  NOTE: this will likely be adjusted in the future
	  after further changes to struct proc are made.

Tested on i386 and Alpha.  Changes are mostly mechanical, but apologies
in advance if it doesn't compile on a particular platform.
2000-05-26 21:19:19 +00:00
thorpej 8964c35eca Introduce a new process state distinct from SRUN called SONPROC
which indicates that the process is actually running on a
processor.  Test against SONPROC as appropriate rather than
combinations of SRUN and curproc.  Update all context switch code
to properly set SONPROC when the process becomes the current
process on the CPU.
2000-05-26 00:36:42 +00:00
thorpej 463931b3ba Nuke dk_establish() from orbit except from those ports which still use
it to determine the boot device: mvme68k, pc532, macppc, ofppc.  Those
platforms should be changed to use device_register().  In the mean time,
those ports defined __BROKEN_DK_ESTABLISH.
2000-05-16 05:45:44 +00:00
hubertf 9f48bba3ae Add "install" target, so "make install" after building the kernel
does something useful.  The target can be redefined by putting a
install-kernel-${MACHINE_NAME} target that fits your needs into
/etc/mk.conf.
2000-05-09 00:56:21 +00:00