7b57bf6d78
Adjust for DKTYPENAME changes.
1998-11-12 16:19:47 +00:00
bfd526219d
bzero->memset, bcopy->memcpy, bcmp->memcmp
1998-08-10 02:57:23 +00:00
1767a286ec
-fix some lint warnings
...
-fix overflow conditions (PR bin/5534, Zdenek Salvet <salvet@ics.muni.cz>)
(+ one more: can VAX SMD drives be >4G?)
-fix output of "*" at odd end cylinder number (not odd size)
-break some lines >80 cols
1998-08-04 11:52:52 +00:00
5582b71d91
Shift column headers into the right position.
1998-07-27 17:19:58 +00:00
48ba78aafd
const poisoning.
1998-07-26 12:00:43 +00:00
e7424be3c9
Fix from Chris Demetriou to modify the way in which arm32 filecore
...
checksums are calculated paying attention to the fact that the way
the checksum works a sectors filled with a single byte value will
always checksum correctly.
1998-06-07 20:33:22 +00:00
3d7afc6d03
fix bad .Xr references
1998-04-29 09:49:10 +00:00
c46ab392dc
Principally, change foo(N) to .Xr foo N
...
Also, do some other mdoc tagging.
1998-04-28 04:07:04 +00:00
01a274e0ea
Clarify the documentation of the "-B" option, inspired by PR#5262.
...
Contrary to the PR, the "-B" option does work, but not on all platforms.
1998-04-27 21:03:08 +00:00
4cc8220755
when reading the MBR, seek to DOSBBSECTOR * DEV_BSIZE rather than just
...
DOSBBSECTOR. DOSBBSECTOR is 0 so it doesn't really matter, but the former
is what was really intended.
1998-03-26 01:37:49 +00:00
55060d037f
in makebootarea() (if NUMBOOT is nonzero), before reading the contents
...
of the old boot area so that 'disklabel -r -w' won't clobber anything,
be sure to seek to the offset of the boot area (like readlabel() does).
Otherwise, if the machine has code which looks up machine-dependent label
bits, the offset read from will be incorrect, and disklabel will end up
secretly replacing the boot area with other data (which probably doesn't
look like a boot block). The only port this currently affects is
NetBSD/arm32, because it's the only one of the three ports that use
NUMBOOT > 0 that has MD label grovelling code.
1998-03-26 01:35:17 +00:00
d9199d66b6
factor out some more common bits into 'confirm', and make it a bit more
...
bullet-proof. also, make the arm32 #ifdefs a bit more consistent with
the i386 #ifdefs (without actually changing the behaviour of the code).
1998-03-25 00:03:19 +00:00
9b9f17c131
use warnx when warning about an old BSD partition ID (i386 MBR code),
...
since err/warn seem to be used consistently throughout the code, rather
than fprintf.
1998-03-24 23:47:28 +00:00
eae9f47f62
KNF arm32-specific label-grovelling code. Also, clean up error messages
...
(errx instead of err, kill bogus newlines, make error messages look more
"normal").
1998-03-24 23:45:31 +00:00
699af7acdd
Handle new MBR partition ID on i386. Put all code which decides about
...
usability of an entry to one place, use same algorithm as kernel (ie,
check signature).
1998-03-02 16:26:47 +00:00
3fe138c146
RCS Id Police.
1998-01-09 08:03:16 +00:00
db1f766937
Add missing -C flag in SYNOPSIS
1998-01-01 04:51:54 +00:00
2db041522a
Fix typo; the flag for interactive disklabel creation is not -e but -i.
...
Also, make the description of -C flag into separate paragraph.
1998-01-01 04:47:05 +00:00
94f6d2b411
Fix usage; -i and -C flags are alway effective regardless of NUMBOOT.
1998-01-01 04:38:43 +00:00
b8e8eb0e1f
On the sparc, do not write to the raw disk at all if `-r' is on.
1997-10-19 20:45:42 +00:00
b58a4f15c4
additional sun3/sparc warning about the "-r" option.
1997-10-18 23:46:44 +00:00
1d23b0901e
Define NUMBOOT=1 for the arm32 port.
1997-10-18 07:28:47 +00:00
db54fc7a59
Added support for filecore partitions on arm32 platforms.
1997-10-17 21:29:36 +00:00
d5adc82d1e
add a warning about sun3 and sparc systems requiring partitions in integer cylinders or the boot ROMs get upset, per PR#3267. Is that it?
1997-10-14 06:30:13 +00:00
dd53470e10
The number of fs types is FSMAXTYPES not DKMAXTYPES.
...
Correct read of formatted file (used with -e or -R) so that fstype with
spaces will work. Also enlarge the fstype field by 2 chars so that
"Linux Ext2" will not be truncated.
1997-10-13 09:53:26 +00:00
fc8191fee4
- Use .Nm "" instead of .Nm disklabel in SYNOPSIS.
...
- Do a trick to remove whitespace before close paren from generated output.
- Delete space at the end of line.
1997-10-11 02:28:17 +00:00
e230a48b57
CFLAGS->CPPFLAGS
1997-10-10 19:47:50 +00:00
76e13a0128
all but the first .Nm in SYNOPSIS need to be spelt out. [bin/4256]
1997-10-10 16:12:45 +00:00
fb5b34e71c
Backout prototype of opendisk.
1997-09-30 17:30:29 +00:00
6bebb4822d
Add a prototype for opendisk().
1997-09-30 16:54:31 +00:00
216ef04613
switch to using opendisk(3) from libutil
1997-09-25 05:08:28 +00:00
8daf159019
Don't pass return value of writelabel() to strerror(), since
...
the value is not a errno but just 0 or 1.
1997-09-18 22:20:36 +00:00
8a293e132a
fix sccsid conflict
1997-09-16 02:43:59 +00:00
2ddc10a0ab
define WARNS?=1 for all of sbin/*
1997-09-15 12:45:47 +00:00
95b3ccaa29
- cleanup use of .Nm
...
- xref installboot(8)
- deprecate register
1997-09-14 08:50:16 +00:00
84320a218d
Define boot1 if NUMBOOT > 1.
...
Noticed in pr#3850, but fixed differently.
1997-07-10 08:30:47 +00:00
46ab71e02f
s/except/accept/, from John F. Woods in PR bin/3802
1997-07-02 03:19:09 +00:00
5ec7cc78a5
Fix warnings.
1997-06-30 22:51:27 +00:00
bdb6d3716b
i386 now uses "installboot" for installing boot blocks. Comment out
...
the CFLAGS+= -DNUMBOOT=2 for now.
1997-06-07 00:47:27 +00:00
c917dfb5b2
Fix broken uses of Dd. Both the mdoc and mdoc.samples pages agree:
...
.Dd is supposed to be invoked like:
.Dd month day, year
e.g. ".Dd January 25, 1989", rather than:
.Dd "month day, year"
which is what these pages did.
1997-05-29 01:48:05 +00:00
f3703d3a82
Remove -g
1997-03-18 21:27:16 +00:00
5a6005a07e
Off by one.
1997-03-18 21:26:43 +00:00
cb77572e20
use mkstemp() instead of mktemp()
1997-03-16 05:25:38 +00:00
e27abe4739
Nuke obsolete special case .if for amigas.
1997-03-14 22:49:51 +00:00
3d71dbfd9b
fix reversed test for maxpartitions.
1997-03-09 00:35:44 +00:00
649ae0edb1
Jason says: Use getmaxpartitions(3) to determine the number of partitions
...
allowed in this architecture.
1997-03-09 00:14:17 +00:00
72fbacb380
Add -i (interactive mode to create/edit labels) inspired by the SunOS/Solaris
...
format/partition command.
1997-03-08 23:46:08 +00:00
80c0d60f84
alternate -> alternative, per PR 2643
1997-03-08 13:47:08 +00:00
cdc9144332
Add missing '}', from David Carrel <carrel@ipsec.com>, PR #2873 .
1996-10-20 21:59:36 +00:00
a1ba72f394
PR/1551: clarify usage in manual page
...
PR/2452: add -t option to print label in disktab(5) format.
Misc cleanups...
1996-10-02 13:49:44 +00:00
a26a090a50
Fix disklabel to deal with some syntax errors a little better.
...
Mostly, when someone specifies a partition entry like:
c: 1295850 0
or
g: 1295850 0 4.2BSD
disklabel would dump core. Now it generates a warning like it should
in the first case and complains about too few fields in the second.
Perhaps I should just default to unused in the first case, but this prevents
core dumps. (pr bin/2659)
1996-08-10 18:54:48 +00:00
ddcb18b00b
Don't display cylinder comments if the number of cylinders is zero. This
...
closes pr bin/2683.
1996-08-10 17:59:01 +00:00
6fcba07ce4
Update.
1996-07-03 22:38:37 +00:00
b449415724
On the sparc on an extra DIOCWDINFO after writing to the raw device.
1996-06-29 18:44:11 +00:00
458252ce61
Allow display and editing of partition size & offset fields in
...
<cyl/track/sector> format. This format is always excepted on input
(`-e' and `-R'); to display it use `-C'.
1996-06-29 15:50:18 +00:00
c047ffa9e6
Allow display and editing of partition size & offset fields in
...
<cyl/track/sector> format. This format is always accepted on input
(`-e' and `-R'); to display it use `-C'.
1996-06-29 15:50:16 +00:00
6f4ec6284f
Include the total number of sectors in the text representation of
...
the label; calculating based on the disk geometry is not always
accurate (notably, for SCSI disks). Also be a bit more careful
about printing out fixed-width types.
1996-03-14 19:49:24 +00:00
94caee8dd7
PR487. From John Kohl. (more examples and some corrections)
1996-01-16 06:41:20 +00:00
2bccd7cac4
don't define NUMBOOT on the alpha, any more. boot block installation
...
is now done by /usr/mdec/installboot.
1995-10-17 16:34:04 +00:00
45bcb4b8c3
sys/errno.h -> errno.h
...
sys/signal.h -> signal.h
1995-06-26 23:17:26 +00:00
f6f6145e7f
Make sure to reset signal mask on errors.
1995-04-29 22:42:07 +00:00
c39f186d60
Changed to use only one bootblock file on VAX.
1995-04-23 19:27:59 +00:00
f66d5868d5
Added vax for 2-file boot blocks.
1995-04-18 22:37:46 +00:00
b1c02cd571
make sure that the alpha boot block is checksummed in a way more
...
acceptable to charles; #ifdef it, and do it explicitly here, rather
than doing a WDINFO ioctl for the -r case.
1995-03-22 23:48:49 +00:00
cdc420327d
Don't do a DIOCWDINFO after already writing the label.
1995-03-22 09:14:34 +00:00
be82a25869
Use POSIX signals.
1995-03-21 18:48:41 +00:00
10df2990d8
re-order the DIOCWLABEL in the rflag case, so it actually works right.
1995-03-19 23:37:56 +00:00
0114e805ce
convert to new RCS Id conventions; reduce my headache
1995-03-18 14:54:19 +00:00
532a938c1d
NUMBOOT == 2 on the alpha, too.
1995-02-11 02:42:21 +00:00
cbdbe9a97a
do the DIOCWDINFO in writelabel() even if -r is specified.
...
On most machines it's redundant, but it gives others the chance to
take special actions, e.g. updating a checksum.
1995-02-10 23:24:19 +00:00
d2682eafca
docs follow code.
1995-02-05 14:11:53 +00:00
bebd64c62c
Fix typos, and minor cosmetic changes.
1995-01-30 20:14:10 +00:00
27761b7c7f
Change the magic question to an absolute, flat lie that should hopefully make
...
people think twice before toying with it. B-P
1995-01-12 12:23:19 +00:00
1e71c95ea1
kill unnecessary .include.
1994-12-22 11:14:51 +00:00
26d9497d49
Clean up deleted files.
1994-12-22 10:44:01 +00:00
ae9172d6cd
specify man pages the new way.
1994-12-22 09:57:51 +00:00
8e0e3522e1
pull in bsd.own.mk by hand, early, so NOMAN= can be defined there.
1994-12-20 15:12:31 +00:00
5eeab43e28
more cleanups from Jim Jegers, passed over by me.
1994-12-05 20:15:31 +00:00
2968cf25a4
Clean up this festering pile of rotten code a bit. To wit:
...
* Add prototypes.
* Remove a strange and apparently pointless bit of code propagated
from 386BSD.
* Collapse NOWRITE and WRITEABLE into one.
* Use the same algorithm as the kernel for finding the label.
* Redo some of the parsing more sanely.
1994-09-30 02:33:15 +00:00
ea7b5d4ec6
Eliminate uses of some obsolete functions.
1994-09-23 14:26:58 +00:00
7322d6fb41
Finish 4.4-Lite merge, and convert to use err(3)/warn(3) functions.
1994-09-22 22:03:52 +00:00
65e8c80074
Fix i386 disklabel bug
1994-07-20 21:22:03 +00:00
7217cac69e
usage message with less surprise
1994-07-05 03:09:21 +00:00
965c81a824
disklabel(8) from 4.4 merged with our old disklabel(8) by John Brezak
...
(brezak@apollo.hp.com ). hp300's can now disklabel by themselves.
1994-06-24 13:48:17 +00:00
3cd4ed5cd4
fix include file
1994-06-13 14:29:08 +00:00
15c9d83826
don't core so easily
1994-03-21 00:56:58 +00:00
c46eb1bc76
added -D${MACHINE} for amiga's becuase of differing sizeof (struct disklabel)
1994-02-12 17:49:32 +00:00
ab3a89f913
Fix spelling errors
1994-01-14 02:05:23 +00:00
1900f7508b
386BSD -> NetBSD and/or i386
1993-12-06 09:37:30 +00:00
dd486c4952
We said we're going to default to `n', now do it!
1993-12-02 04:57:27 +00:00
ba01cff101
Check boundary of *c* partition against the DOS partition table, not the *a*
...
partition, as we might want the latter to not necessarily be at the beginning
of the NetBSD section.
1993-10-13 06:26:14 +00:00
f08e3f34a5
merge in changes from netbsd-0-9-ALPHA2
1993-08-07 07:42:13 +00:00
66db4d4b5e
Update to -mandoc macros
1993-08-05 20:49:16 +00:00
e9d867ef50
Add RCS identifiers.
1993-08-01 17:54:45 +00:00
dfb9caab49
Add RCS indentifiers.
1993-08-01 07:32:48 +00:00
cda4f8f6ee
Add RCS identifiers.
1993-08-01 05:37:30 +00:00
f6e43c3958
Use ${COPY}, not -c for install.
1993-07-18 19:17:22 +00:00
ad0e69d5b0
Don't build man page if NOMAN set.
1993-04-25 06:58:16 +00:00
c1d3c01291
Cleanup for GCC 2.
1993-04-18 18:14:35 +00:00
2357a0fbaa
make user the cat5 dir exists before trying to install man page there.
1993-04-10 20:17:42 +00:00
christos