8e734e6188
Make the release notes, etc.
2000-06-07 20:29:00 +00:00
b88d86b1b6
Comment out telnet, ftp since they use cleartext passwords (discussed
...
recently on tech-net, no objection raised except that it doesn't go
far enough..)
Fix misc/10219 as suggested in PR: add -L to rlogind and -l to tftpd
command lines to enable logging.
2000-06-06 12:04:02 +00:00
95c4357e1b
Add kpop.
2000-06-05 18:12:57 +00:00
0377727ee6
Fix typo in last commit.
2000-06-04 09:34:58 +00:00
306acd3e78
Handle "bktr" related devices like audio devices:
...
- Create device nodes with numbered names (e.g. "tuner0").
- Create softlinks with unnumbered names (e.g. "tuner") pointing to device
nodes of unit 0.
2000-06-04 09:34:06 +00:00
2ece7fc42f
use netstat -inv for all address familires. PR 10249.
2000-06-04 08:35:10 +00:00
609377a40f
run sendmail under the following conditions:
...
- /etc/mail/sendmail.cf exists, no /etc/sendmail.cf
- /etc/mail/sendmail.cf exists, /etc/sendmail.cf same content as
/etc/mail/sendmail.cf
die in other cases. PR 10243.
2000-06-04 08:33:58 +00:00
e3fc70bd16
Add a ttyaction file for port-i386 that properly sets the ownership
...
on the console device when you log in using wscons on the console.
Why haven't we had defaults for this all this time?
2000-06-04 00:04:59 +00:00
4d477e62b7
install ttyaction if it exists
2000-06-03 23:53:17 +00:00
5b78d0c312
Rename a remaing comment about portmap to rpcbind.
2000-06-03 17:23:59 +00:00
a5f38c029b
rpcbind uses a pidfile.
2000-06-03 00:17:17 +00:00
580b06b52e
s/portmap/rpcbind/
2000-06-02 23:23:27 +00:00
02cd59a751
* Portmap is now called rpcbind.
...
* Add IPv6 RPC entries to inetd.conf (commented out by default, as the others)
* Add netconfig file, needed for TI-RPC code.
2000-06-02 22:54:08 +00:00
ce0c35cb45
Make the two installation directories mentioned in INSTALL.*
2000-05-31 21:09:48 +00:00
934311a24b
Update instfs to current ramdisk size.
2000-05-31 17:39:55 +00:00
a7c4c34f96
refer PR 10100 for /etc/sendmail.cf check
2000-05-31 16:00:36 +00:00
1a725dd534
Build and install the release notes.
2000-05-31 15:45:55 +00:00
d32a31d48c
Build boot media and release notes under "snap_md_post", to complete
...
the "make release". Largely copied from the i386 port, and adapted.
2000-05-31 14:33:11 +00:00
f5e3c48aad
Depends on quota; when quotached runs while NFS clients are writing,
...
bad things happens.
2000-05-29 07:10:41 +00:00
e63bc36c7f
Call "load_rc_config()" earlier so that configuration variables are read
...
before command arguments are defined. Fixes PR bin/10220 by Ron Roskens.
2000-05-29 06:53:03 +00:00
bb3e285167
Add Cyclades-Z nodes.
2000-05-28 23:12:15 +00:00
adbdfe4a4e
Fix this so that release notes are build properly upon `make release'.
2000-05-28 17:31:27 +00:00
cdc1e0be32
/etc/dhclient.conf is *not* required for dhclient to run.
2000-05-26 20:44:17 +00:00
e4983783f7
Enhance "rc.lkm" so that it works properly with "/etc/rc.d/lkm[123]".
2000-05-26 17:46:16 +00:00
fb3a33ff99
We may as well allow local additions to /etc/security, since it gets done
...
for the other periodic checks.
2000-05-26 17:08:21 +00:00
75db01943c
Add `ses' devices.
2000-05-22 17:01:30 +00:00
60270df72a
remove /etc/sendmail and other old items.
...
PR 10171 from Andrew Brown.
2000-05-22 04:14:30 +00:00
76b8870254
Add declarations to silence boot-time warnings from named
2000-05-19 13:07:37 +00:00
66b5e3cb8a
make miniroot play with distrib/miniroot
2000-05-18 02:03:36 +00:00
61632e05bb
Software bloat. we need more space for the ramdisk.
2000-05-17 21:44:15 +00:00
18cbc264e3
build INSTALL for ramdisk. cleanup pcs750.bin rules to not leave droppings
...
behind.
2000-05-17 21:40:45 +00:00
41b9e77eff
MAKEDEV goo for Cyclades-Z multi-port serial.
2000-05-17 18:14:10 +00:00
4c318b5d41
At boot, initiate parity/mirror reconstruction as required.
...
This operation is backgrounded, and sequentially ordered.
2000-05-16 16:54:33 +00:00
d683136c9f
Don't complain about existence of "/etc/sendmail.cf" if "sendmail" is
...
not set to "YES" in "/etc/rc.conf".
2000-05-15 06:16:04 +00:00
598c993af2
Add RCSid.
2000-05-14 23:13:54 +00:00
e3d7832343
Minor change:
...
Don't use a backquote expression to get the host name; use a pattern
substitution on lop-nor.ihack.net instead.
2000-05-14 18:20:55 +00:00
24ad7fd36c
Add "wscons" to requirement list so that a tty used for syslog output
...
will be created before starting the syslog daemon.
2000-05-14 13:12:11 +00:00
5c1b0ec207
Use load_rc_config() (from rc.subr) instead of sourcing /etc/rc.conf.
...
This allows us or a user to change the configuration file method in
one place - rc.subr - without having to edit all of the rc.d/* files.
2000-05-13 08:45:06 +00:00
2c25ae21eb
Implement load_rc_config(), which takes the config name as an argument.
...
Currently this just loads /etc/rc.conf, but this will make it easier
for us and users to modify the config mechanism without modifying all
of /etc/rc.d/*.
2000-05-13 08:23:45 +00:00
78abee064b
remove netstart
2000-05-13 08:07:01 +00:00
92612bb41e
this should have been removed as part of the rc.d commit
2000-05-13 08:02:35 +00:00
ff0601b77a
remove commented-out entry for mountd, since whilst support for inetd
...
was added to mountd in mountd.c::1.6, it was removed as part of the
4.4-lite merge in mountd.c::1.12. if the entry was uncommented your
machine might clag up after a showmount as inetd spawned lots of
mountd processes...
2000-05-13 07:28:09 +00:00
d934c3b536
only support reload as an extra command; there's too much special case
...
code that needs to be implemented to make this script totally replicate
what /usr/sbin/ndc does.
2000-05-13 03:46:42 +00:00
eabbaa2f0c
implement three new variables for run_rc_command:
...
- ${name}_chdir directory to cd to before running ${command}
- ${name}_nice nice level to run ${command} at
- ${name}_user user to run ${command} as
based on [misc/9954] by Dave Sainty <dave@dtsp.co.nz>, except that it works :)
2000-05-13 03:07:17 +00:00
6df6f56909
remove obsolete /usr/X11 entries
2000-05-13 00:57:17 +00:00
a6ff236176
Pasto in last.
2000-05-12 18:12:55 +00:00
fe42f7fbab
Add all of the arm26 dirs.
2000-05-12 18:11:50 +00:00
51ab46d939
No, *REALLY* add man4/arm26.
2000-05-10 16:53:53 +00:00
e37973802e
Add {cat,man}4/arm26
2000-05-10 16:46:41 +00:00
6c97e2bd78
Initial commit of arm26 port
2000-05-09 21:55:44 +00:00
4bc21c2fb4
do not let 127.0.0.0/8 leave the node. based on RFC1122.
2000-05-09 10:49:26 +00:00
10e25f6012
make default sendmail.cf IPv4-only again.
...
roll sendmail-IPv6.cf, which does IPv4/v6.
2000-05-08 00:37:53 +00:00
ce6e7b1e81
Add tun2 and tun3 to the all target and create the ugen0 devices in the
...
usbs target.
2000-05-07 19:15:21 +00:00
fff5c01493
This was doubly borken...
2000-05-07 19:03:25 +00:00
fe4377f98c
Only warn on non-default old nfsiod args.
2000-05-07 02:04:20 +00:00
d690122a5e
add devices for bktr; also add them to all target
2000-05-07 01:39:27 +00:00
83072a01c7
Since src/gnu/usr.sbin is populated add it to the cdpath.
2000-05-06 13:17:33 +00:00
4157176c27
Added an obj target to ensure that KERNOBJDIR exists - in case
...
we are using MAKEOBJDIRPREFIX.
Fixed the comment about why we grab ../Makefile.inc
2000-05-06 07:52:19 +00:00
5c2de4c3fa
Build INSTALL_SMALL.
2000-05-06 05:31:58 +00:00
13c8f7a2df
check /etc/mail/aliases on check_aliases.
...
/etc/aliases will be checked as well, if exists (for backward compatibility).
2000-05-05 18:28:53 +00:00
6901565540
sync with sendmail 8.10.1 migration. /etc -> etc/mail
...
From: Andrew Brown <atatat@atatdot.net>
2000-05-04 01:07:40 +00:00
78565052f1
do not cope with pre-8.10 configuration file. do not start sendmail.
...
From: hubert
2000-05-03 17:03:10 +00:00
dc09e9637e
xntpd -> ntpd
2000-05-03 14:40:39 +00:00
14e9ff0043
correct typo (sendmail upgrade)
2000-05-03 11:37:16 +00:00
366bbade5a
sync with sendmail upgrade.
...
- sendmail configuration files are in /etc/mail, not /etc.
- src/etc/aliases will be installed into /etc/mail/aliases (confusing)
- rc.d/sendmail warns if /etc/sendmail.cf exists.
2000-05-03 10:55:19 +00:00
94dc65714b
add /etc/mail, which will be used with sendmail 8.10.x.
2000-05-03 09:24:23 +00:00
17424fe1fe
sync with rc.d/network, about IPv6 prefix filters
...
(since we still ship it, we need to make it up-to-date)
2000-05-03 07:04:22 +00:00
45fb67b360
remove/change missleading comments
2000-05-03 00:10:33 +00:00
b09bd0e884
s/xntpd/ntpd/
2000-05-02 16:31:11 +00:00
e5150c9868
Out with the old, in with the new.
2000-05-02 12:19:20 +00:00
dd4d1cfbc2
Change xntpd to ntpd.
2000-05-02 12:17:28 +00:00
dfbbad05df
Use "ntpd.pid" for pid file, change other xntp references to ntp.
2000-05-02 12:16:07 +00:00
0f7d1d56ff
Add a comment about urio.
2000-05-02 12:01:13 +00:00
7eb7e0a9cd
Make urio(4) device node.
2000-05-02 11:59:40 +00:00
f5e35141a6
Remove the never populated /usr/share/doc/xntp, and add /usr/share/doc/html
...
and the ntp4 subdirectories under that.
2000-05-02 11:49:16 +00:00
40ca86f953
Make audio devices.
2000-05-02 08:17:51 +00:00
2e87728bd8
Restructure a bit as to create wscons device nodes using the 'wscons'
...
argument, rather than enumerating all the terminal devices. (Convenient
side-effect: ttyEcfg ist actually created.)
2000-05-02 08:03:38 +00:00
734bcf16ec
Use bsd.kernobj.mk
...
Also if KERNELS_DONE is defined skip building kernels. Handy if re-spinning
due to errors in distrib later on.
2000-05-02 06:41:44 +00:00
0a43d29758
Install the localhost namedb file.
2000-05-01 05:29:34 +00:00
31d7194c3f
Add "make distribution" for Postfix.
2000-04-30 21:45:55 +00:00
816886ef7a
move /usr/share/postfix to /usr/share/examples/postfix. It makes sense
...
to have a /usr/share/sendmail because that directory contains the m4
source file for the .cf file in /etc, but for postfix, it really is
just an example.
2000-04-30 18:10:28 +00:00
0a610ebbd3
use extra_commands= instead of using 2nd argument to run_rc_command
2000-04-30 13:23:04 +00:00
c8ddd6124a
- prefix some more local variables with `_' (when you have a convention,
...
stick to it :-)
- simplify run_rc_script (no need to support fast* or force* here...)
- clarify some comments
2000-04-30 13:16:47 +00:00
3b853f3018
remove /var/run/dmesg.boot before attempting to write to it
2000-04-30 12:39:56 +00:00
32c9a44095
- use checkyesno in $start_precmd and change start_cmd to `postfix start'
...
- use $extra_commands instead of passing "reload" to run_rc_command
2000-04-30 12:21:00 +00:00
0c2e1a2b7e
change run_rc_command() to take the list of extra commands supported
...
from a variable ($extra_commands) as opposed to from $2-* on the
argument list. it's cleaner; and allows for the possibility of
multiple command arguments being passed to run_rc_command() in the
future.
2000-04-30 12:19:07 +00:00
fc2c9714f0
add default alias for postfix pointing to root.
2000-04-30 05:49:10 +00:00
cc7e7b3d7a
Fix raw partition number for cd(4) nodes.
2000-04-29 09:47:01 +00:00
63f94fabf2
Fix the last change so it doesn't fail due too a missing '; then'.
2000-04-29 06:01:08 +00:00
9e96565f2e
pcmcia modems end up at com3 with a GENERIC kernel, so create a tty03 in std
2000-04-29 00:10:37 +00:00
e335e1cd4d
useradd defaults to using the 'users' group, so add one.
2000-04-29 00:09:31 +00:00
b093a1430b
Make ca* devices.
2000-04-28 13:55:04 +00:00
0c5f67f0ac
in check_pidfile and check_process, also match "(" + `basename prog` + ")" .
...
noted by veego@
2000-04-28 01:40:09 +00:00
7a38ab7c44
Don't warn about $hostname not being set if $dhclient == YES; it's quite
...
likely that we'll be getting the hostname via DHCP when it runs.
2000-04-28 00:13:39 +00:00
ebe6c4d40d
Use the stop_cmd to unmount the filesystems with 'umount -a'.
...
This helps to fix the unclean reboots (at least on my system).
2000-04-27 21:00:50 +00:00
c9f5754ee8
You need to add a xxx_precmd with a checkyesno yyy if you use a xxx_cmd
...
in an rc.d script.
2000-04-27 20:58:26 +00:00
9a8415ba0b
Add a bunch of SSL services.
2000-04-26 16:28:17 +00:00
0716b4f382
don't bother checking rc_configured each time run_rc_command executes; once in /etc/rc is enough
2000-04-26 15:06:46 +00:00
fad0a37405
Provide rc.d support for the Postfix mail system. Committed to the
...
base because there is no support for packages in rc.d, and Postfix
is supposed to become part of the base system anyhow.
2000-04-26 05:28:03 +00:00
0316517d36
Make ccd and raidframe provide `disks', and make swap1 and fsck
...
depend on `disks', rather than `ccd' and `raidframe'.
2000-04-26 05:13:51 +00:00
dffc281396
add zone file for "localhost.". this is included in examples in BIND8,
...
and is a good thing to have (no outside DNS server will supply this).
2000-04-26 01:33:27 +00:00
065c791de8
Add skeyaudit to /etc/security (with a variable to disable) per PR 5871
2000-04-24 23:46:37 +00:00
caa2beb10e
revert previous; the fast-start functionality already existed, and
...
works at multi-user boot. (starting /etc/rc after single user boot
doesn't exhibit this fast start behaviour).
2000-04-22 03:01:22 +00:00
3fff16ff47
rtsol is not a daemon. rtsol.d should have been killed by rc.d/rtsold.
...
(correct me if i'm wrong)
2000-04-20 02:12:04 +00:00
f3d36a14e8
Add login.conf, sysctl.conf and usermgmt.conf.
2000-04-20 02:01:52 +00:00
72951fce20
Don't need ()'s around "cd ... && ${MAKE} ...".
2000-04-19 13:45:24 +00:00
5e6480feca
Add an "rc_fastboot" variable check in rc.subr, that if set adds
...
"fast" to the start of the run_rc_command arg.
/etc/rc calls each rc.d script with rc_fastboot=yes so that rc.subr
aware scripts to use "faststart" to skip the process running check.
2000-04-19 04:26:22 +00:00
a596663a81
nfsiod script is gone.
2000-04-16 04:18:51 +00:00
a32696c2de
Death to nfsiod!
...
It is replaced by kernel threads that do the same thing. The number of
kernel threads used is set with the vfs.nfs.iothreads sysctl.
2000-04-15 21:14:48 +00:00
f408de971d
as this script is primarily for compatibility (with people's
...
rc.local), call it in a way that is compatible with the old behaviour:
* remove the stop case
* don't set $1="start" in the start case
xxx: it's debatable if this script should even exist, but i digress ;-)
2000-04-13 00:39:47 +00:00
2665e61925
make `stop' a no-op, so that the network doesn't disappear at an
...
inconvenient time during boot.
this may be fixed a different way in the long term... (not that the old
rc.shutdown supported stopping the network, or could i really see a
practical use for allowing it at this stage, but in the future someone
might want the functionality i've just disabled).
2000-04-11 05:03:24 +00:00
506c359083
Improve backwards compatability and leave securelevel the old way.
2000-04-09 21:00:04 +00:00
163510ecf4
The file /etc/sysctl.conf is now run with sysctl -f at boot time.
...
This replaces the previous /etc/rc.d/sysctl. Also, the variables are now
set earlier, between ipf/ipnat and the network coming up.
The rc.conf defcorename and securelevel variables are no more. You can
set them directly in sysctl.conf now.
2000-04-08 23:02:53 +00:00
93f24178a7
dhclient does not, in fact, require /var/db/dhclient.leases to exist.
2000-04-06 17:19:13 +00:00
dc04b64906
- - Take BUILD_KERNELS to be the kernels to make into sysinstall kernels.
...
- - Clean up.
2000-03-30 03:25:48 +00:00
c4ae664105
Revert last two changes. As pointed out by enami tsugutomo, snap_md_post
...
is the wrong place to do the splits, as the tar files are not yet made!
2000-03-29 23:47:53 +00:00
5c57db66c3
Add comments.
2000-03-29 15:58:42 +00:00
58e9dbb6aa
Mount ext2 fs with kernel on /stand.
2000-03-29 15:58:34 +00:00
129d97f658
routed is live in /sbin, not /usr/sbin. Pointed out by kay@kaynet.or.jp.
2000-03-29 09:09:06 +00:00
aea5721be9
from i386 port revision 1.5 by Tsugutomo Enami:
...
Uncomment out the CD-ROM entry and remove outdated comment for the
reason why it was commented out.
2000-03-29 06:45:35 +00:00
a1e356450f
Uncomment out the CD-ROM entry and remove outdated comment for the
...
reason why it was commented out.
2000-03-29 03:43:32 +00:00
e8b27ae5ed
Check rc_configured also here, and bail out if it isn't set to yes.
2000-03-29 02:13:51 +00:00
630e63cb47
Don't include ${RELEASDIR} in INSTALLATION_DIRS. Error pointed out by
...
Urban Boquist in PR install/9689.
2000-03-28 16:26:30 +00:00
47cd48f3db
Use distrib/sets/Makefile in the release: and new cryptoset: targets.
2000-03-28 00:39:17 +00:00
96b85dc028
set major number of /dev/console to 0 (not 8 (com))
2000-03-27 19:35:25 +00:00
7b0e557100
Build the split sets in place on "make release".
2000-03-26 15:48:22 +00:00
3a640d007a
Add ftpd.conf.
2000-03-24 22:37:48 +00:00
5ce9472a83
NetBSD/cobalt /etc.
2000-03-19 22:10:56 +00:00
0a94c72b0f
correct reject route installations for IPv6. improve comments.
2000-03-17 17:41:01 +00:00
10257beef5
comment fix. it is not mandatory to supply the configuration file,
...
rtadvd(8) can guess the configuration from the routing setups.
2000-03-17 17:35:20 +00:00
174455c38a
fix check for domainname since it can come from /etc/defaultdomain as well as $domainname
2000-03-16 22:22:15 +00:00
d52bc434ce
Device entries for ca(4).
2000-03-16 14:58:09 +00:00
8fbb81c21e
dhclient lives in /sbin, not /usr/sbin
2000-03-15 03:15:47 +00:00
d8a503fec5
Try to make the install floppy work on 4MB machines:
...
- reduce memory disk size
- use x_dd, x_ifconfig and x_route
- use libhack.o (sync with i386)
- don't use mfs as /tmp
Tested by Luigi Filippini <filippini@tiscali.it> and me.
2000-03-13 13:16:54 +00:00
52462864b7
ssh script removed, so remove sshd=NO line
2000-03-13 05:07:15 +00:00
0059d641e5
* replace daemon, login, servers with DAEMON, LOGIN, SERVERS
...
* remove sshd (it was from my private system)
2000-03-13 04:03:52 +00:00
028706d573
Add wsmux0 and wsmux1.
2000-03-12 13:58:14 +00:00
deaf45edc1
disallow packets to malicious 6to4 prefix, based on
...
http://playground.iijlab.net/i-d/draft-itojun-ipv6-transition-abuse-00.txt
2000-03-12 04:21:26 +00:00
5d18d90843
Rearrange so the ouput of this is a bit more cosmetic.
2000-03-12 03:49:36 +00:00
292a9f03be
Since we have an "sshd" script in rc.d, we should have an "sshd" knob
...
in rc.conf.
2000-03-12 03:49:11 +00:00
bfa0f14ea6
Fix the network_stop function so it doesn't fails due to missing ]['s.
2000-03-11 20:13:42 +00:00
0cc5873563
Add raidframe to the REQUIRE list. rcorder seems to get it right, but it
...
is better to add it.
2000-03-11 20:12:22 +00:00
b869270297
Don't start rc.wscons with an start/stop argument. Disable stop and add an
...
checkyesno check.
2000-03-11 20:11:16 +00:00
84807b9933
Add missing checkyesno's.
2000-03-11 20:10:21 +00:00
aacfec2af3
mountd requires mountall.
2000-03-11 17:29:50 +00:00
5fa9d50bcd
add missing callunit.
...
fix ucbsnd.
2000-03-11 07:45:31 +00:00
738b8e9986
oops, pppd doesn't require /etc/ppp/options now.
2000-03-10 20:21:57 +00:00
a59fb6d3bc
forgot to add /etc/ppp/options to special(5)
2000-03-10 20:02:46 +00:00
47cab3ac18
create /etc/ppp when building install sets
...
add this and a lot of files not previously looked at in special(5)
2000-03-10 20:01:50 +00:00
c595577502
if checkyesno do_rcshutdown, run scripts in /etc/rc.d/* in the
...
reverse order returned by rcorder
2000-03-10 13:17:25 +00:00
8f8c6d6b2a
run scripts in /etc/rc.d/* in the order returned by rcorder
2000-03-10 13:15:58 +00:00
d2fc7332ae
add /etc/rc.d
2000-03-10 12:04:43 +00:00
c132a440d2
install rc.d scripts
2000-03-10 11:59:35 +00:00
c53094a738
rc.d scripts derived from /etc/rc
2000-03-10 11:53:23 +00:00
6096ea59cd
* add:
...
check_pidfile parse a pidfile for a pid, checking that the
process is running, and print the matching pid
check_process print a list of running pids that match the procname
run_rc_command kitchen sink function to simplify creation of
rc.d scripts
run_rc_script invoke an rc.d script appropriately
rc_usage print a usage string for an rc.d script
err similar to err(3)
warn similar to warn(3)
* add copyright
* remove islocalfs(); nothing uses it
2000-03-10 11:39:27 +00:00
dfa4c86f40
Correct cd* minor number.
2000-03-07 18:24:16 +00:00
327c7e4af9
add lm0 to 'all' target
2000-03-07 17:55:06 +00:00
020a8ac5b2
make clearing of /tmp after reboot configurable (default on), as per recent
...
discussion on current-users
2000-03-07 14:33:13 +00:00
72f77e9fb3
Build the miniroot, too, when building the release.
2000-03-06 21:54:05 +00:00
f61a38f7f7
Add "ta=4.2BSD" to floppy A partition + some other small fixes.
...
From Todd Whitesel.
2000-03-04 16:11:35 +00:00
24c978b1d5
Add "floppy" target.
2000-03-04 15:46:08 +00:00
8c8afb18a9
add TX39 internal UART and UCB1200 audio device.
2000-03-04 15:02:44 +00:00
9fbb1fd9b4
Add /usr/share/man/{cat,man}8/arc
2000-03-03 20:34:17 +00:00
2b9070c1d9
to make binary snapshot
2000-03-03 12:56:05 +00:00
9e721e2455
Don't use grep to find if we have fdesc mounted. case is faster and
...
works without having /usr mounted.
2000-03-01 19:03:17 +00:00
89c2906ea5
explicitly allow writable directories when rebuilding the alias
...
database, otherwise this will fail if any directory in ${DESTDIR} is
g+w.
2000-03-01 16:48:35 +00:00
627898817e
sync with etc/namedb change (IPv6 loopback reverse database file)
2000-03-01 11:21:13 +00:00
ca7ee807d5
change filename for IPv6 loopback address (::1).
...
many found it ugly, and I found that I've made a mistake in old name.
there needs to be 4 more "0"s!
this commit renames
etc/namedb/0000:0000:0000:0000:0000:0000:000 into etc/namedb/loopback.v6.
(based on recent discussion I did not use cvsmove)
2000-03-01 11:06:27 +00:00
ab5e19cc9f
Make /dev/usb, a node where USB events can be read.
...
Also add ttyU to hpcmips.
2000-02-29 19:07:41 +00:00
66ee7c2e15
No need to make audio devices twice in all.
2000-02-29 18:48:05 +00:00
37eb9eebc2
Initial import prep port.
2000-02-29 15:21:20 +00:00
f539e10ff8
enable IPv6 ftp and telnet by default.
...
it makes more sense to me as we have INET6 in kernel, and we have ftp4/telnet4
enabled by default. maybe I'm biased:-)
2000-02-28 17:25:42 +00:00
24d8e4f798
added share/locale/pt_BR/LC_MESSAGES for grep 2.4
2000-02-27 01:27:48 +00:00
f4665e12b2
Install a blank sendmail.st here.
2000-02-26 18:42:31 +00:00
6009529bb4
Remove extra `;' in md* entry.
2000-02-26 05:39:51 +00:00
bd10f55368
Nuke an extra ;; introduced by md* fix.
2000-02-26 04:43:27 +00:00
a41f67cc02
Add `lm*' for LM7[89] hardware monitor
2000-02-25 02:35:49 +00:00
a23763688e
Make MI SCSI device ready. For now MAKEDEV all won't create them.
2000-02-22 03:57:38 +00:00
a59987f569
Let the main Makefile deal with building kernels.
2000-02-20 03:52:22 +00:00
01b2f6e1de
Sum the floppy directory, too.
2000-02-20 03:38:04 +00:00
ad78992969
Always checksum binary/kernel, now that there is at least one file in it.
2000-02-20 03:32:37 +00:00
58895df429
Clean up a bit.
2000-02-20 03:11:12 +00:00
f10265540b
Always install GENERIC in the kernels directory.
2000-02-20 03:10:50 +00:00
4bf1c78bfb
Make the tset stuff actually set the environment variables again.
...
Someone was on crack.
2000-02-19 19:00:13 +00:00
b24c03aa71
Simplify the tset crap, and do not set $HOME gratuitously.
2000-02-19 18:39:01 +00:00
4316d096db
1.) bring over the second half of David Brownlee's change to dot.login --
...
don't query the user for terminal type if the type is not `unknown'
2.) change this a little in both the csh and the [k]sh cases -- do call
tset(1) even if the terminal type is known (so that TERMCAP is set
properly, but don't have it query the user.
2000-02-16 03:07:09 +00:00
8d796b1774
Port to [k]sh(1) startup files David Brownlee's improvement from
...
cvs rdiff -r1.4 -r1.5 basesrc/etc/root/dot.login
As there, text is from Miles Nordin.
2000-02-16 02:02:02 +00:00
6d39fee74c
Only display the 'use su' message in the non 'su -' case.
...
Update the 'use su' message (text from Miles Nordin).
If the terminal type is !unknown, do not prompt for it.
2000-02-15 19:29:54 +00:00
aae51fbc36
Check for CRYPTOPATH variable instead of "../domestic" when deciding to build the secr set.
2000-02-14 18:37:39 +00:00
29cb4c7412
Merge wscons work onto the main development branch.
2000-02-14 07:12:34 +00:00
a3aa7fe66f
add ip6defaultif configuration variable in rc.conf, for configuring
...
default outgoing interface for IPv6 host when default router list is empty.
the configuration is just for very rare case. it is safe to leave it empty.
2000-02-13 07:47:26 +00:00
c45bb5af35
change console terminal type from 'unknown' to 'vt100'.
2000-02-12 13:46:54 +00:00
e70542be3a
fix comment in "imap" line to honor IMAP4.
...
IMAP2 (RFC1176): Interactive Mail Access Protocol
IMAP3 (RFC1203): Interactive Mail Access Protocol
IMAP4 (RFC1730): Internet Message Access Protocol
2000-02-12 04:02:33 +00:00
15f0d67b67
improve comments about /etc/ifconfig.xxN, /etc/ifaliases, $ifaliases_xxN.
2000-02-11 08:09:56 +00:00
a89dc9b12d
add two symbolic name for tcp/udp port 143: "imap" and "imap4".
...
at least without "imap", fetchmail chokes.
2000-02-10 18:20:56 +00:00
810e380c89
Oops, I've forgotten to commit this on Jan 21.
...
>- rename (revert) normal memory disk device name /dev/mdX -> /dev/mdXa
>- now raw partitions are used for memory disk ioctls
2000-02-10 16:45:37 +00:00
94bfb48ec9
add missing semi-colon
2000-02-09 22:23:32 +00:00
7a0d226970
ip6forwarding -> ip6mode change (somehow i forgot to commit...)
...
PR: 9375
2000-02-09 16:24:03 +00:00
b32545eabf
add tcp6 lines for rshd/rlogind.
2000-02-09 11:05:04 +00:00
c089f6c69a
"sendmail" is in "src/gnu/usr.sbin/sendmail" now.
2000-02-09 08:15:12 +00:00
bb08aa94ac
add ./usr/share/man/{man3,cat3}/atari
2000-02-07 17:48:52 +00:00
4a47d48db2
Install correct ld.so.conf if etc.${MACHINE}/ld.so.conf exists.
2000-02-05 18:25:01 +00:00
aba424872a
add IPv6 loopback address (::1).
2000-02-05 17:53:30 +00:00
64170fdeab
remove (slightly) bogus comment line about IPv6 config.
2000-02-05 17:52:06 +00:00
e9056d34cb
change IPv6 configuration syntax to avoid ambiguity.
...
ip6mode=host: IPv6 host
ip6mode=autohost: IPv6 host, with autoconfig
ip6mode=router: IPv6 router
backward compatibility to "ip6forwading" is provided.
2000-02-05 17:02:42 +00:00
bba35f4508
Install named/0000:0000:0000:0000:0000:0000:000 and ntp.conf to fix the
...
damage in distrib/lists.
2000-02-04 09:24:08 +00:00
f250672496
We don't have a bind4.
2000-02-03 17:51:51 +00:00
db217da391
add example for HP Laserjet with JetDirect ethernet card
2000-02-02 16:04:51 +00:00
4f7848e09f
Add IDE wd* devices for MI wdc support.
2000-02-01 05:26:12 +00:00
f58c419f41
Allow NFS servers to start up.
2000-01-31 12:47:29 +00:00
e80b8c24a3
remove extraneous flags for xntpd startup, since there is now a
...
default ntp.conf file, per PR 4312
2000-01-28 06:55:52 +00:00
613805537a
A default NTP configuration file, per PR 4312.
2000-01-28 06:49:16 +00:00
6e5a5cc306
add reverse lookup table for IPv6 loopback (::1).
...
ugly...
2000-01-27 05:17:12 +00:00
1eea48680e
use 'route -n flush' not 'route flush' otherwise we might spend all our time
...
trying to print hostnames for things we are just flushing anyway.
2000-01-26 07:01:53 +00:00
99a7ca92be
Sync with the reality.
2000-01-24 02:00:50 +00:00
55f474fc12
Fix raidN device creation.
2000-01-21 16:46:04 +00:00
cac7cebd3e
- rename (revert) normal memory disk device name /dev/mdX -> /dev/mdXa
...
- now raw partitions are used for memory disk ioctls
2000-01-21 12:28:22 +00:00
c6459da685
add SES device
2000-01-20 17:13:27 +00:00
7f4bafc7bd
add "-n" to netstat -i to avoid reverse query and better audit.
...
print IPv6 interface stat by netstat -inv separately.
comments from: hubertf and others
2000-01-20 04:13:54 +00:00
7c5a18e4d2
Start automount daemon even if NFS client is not activated. This makes
...
sense for system where "amd" is used to mount local devices like e.g.
CD-ROM drives. Fixes PR misc/9126 by Bjoern Labitzke.
2000-01-19 12:00:49 +00:00
868dc892af
Put a copy of GENERIC in the kernel directory, too.
2000-01-19 08:36:30 +00:00
5a3473733a
Make some warning message consistient with others.
2000-01-19 03:52:12 +00:00
5e1ff60d11
Change the name rc.conf.local to rc.local.conf. This makes *.conf match all
...
config files. Thanks to Greg Oster for the suggestion.
2000-01-18 22:43:23 +00:00
0028c40c50
While we're waiting for the new all singing, all dancing rc system, add
...
a way to configure local stuff; if the file rc.conf.local exists it
is sourced at the end of rc.conf.
2000-01-18 21:52:38 +00:00
aabd13ef64
Use /var/spool/lpd/XXX as pool directory, not /var/spool/output/XXX
...
Intended to address PR #8551
2000-01-17 18:56:08 +00:00
7ab6c9ab36
add IPv6 items.
...
s/ippcp/ipcomp/ for #108 , as
http://www.isi.edu/in-notes/iana/assignments/protocol-numbers
lists it as ipcomp, not ippcp.
2000-01-17 16:39:37 +00:00
f6c95d891c
no need to mount /usr just for sysctl, it is in /sbin now.
2000-01-17 02:37:59 +00:00
e597a72d0b
Use cat -f to avoid denial of service attacks by people who make .rhosts
...
files fifos.
2000-01-15 01:15:12 +00:00
49b3458319
Expand `instfs' to 1.8MB.
2000-01-14 13:50:11 +00:00
12291ad31f
Add raidframe and fix bozos and typos I made.
...
-
2000-01-13 01:06:24 +00:00
645ee40728
- Make /etc/daily run /etc/daily.local if it exists. Make similar change for
...
weekly and monthly scripts.
- Update FILES section in manpages.
2000-01-10 17:03:49 +00:00
bb0e1548bf
gc unused mac68k devices
2000-01-10 02:25:25 +00:00
72a5ed2e26
allow "sh MAKEDEV ttyNN", where NN is 00 to 99.
...
single-digit "sh MAKEDEV ttyN" works in backward-compatible way.
XXX should bring it to other ports as well?
2000-01-09 02:37:06 +00:00
b07199995f
Since the logger(1) puts space between its arguments, there is no need
...
to pass it explicitly.
2000-01-07 05:53:21 +00:00
534cb8a841
Changed to reflect that VGA console works better as 'pc3' terminal type
...
than as 'vt100'.
2000-01-07 05:28:21 +00:00
f7c074aa48
Make sure that warning message starts from the beginning of line. Some
...
warning recently added didn't care about it.
2000-01-07 05:25:45 +00:00
96e5a9b3d5
Cosmetic changes; folding long lines, using tab instead of spaces where
...
appropriate and fixing some indentation.
2000-01-07 05:11:43 +00:00
b614ae7a89
Use %d instead of %e to generate rdist log filename using date(1) so that
...
the resulting filename doesn't contain white space.
2000-01-07 03:52:23 +00:00
c338a5ade3
Remove "miniroot" and "install-ramdisk" entries altogether - we'll
...
reference local disktab files in distrib/pmax.
2000-01-05 23:47:41 +00:00
3b40504351
Make "miniroot" 2MB and add a 3MB "install-ramdisk" entry. Add comments
...
to both of these referring to which Makefile in src/distrib/pmax they are
used in.
2000-01-05 13:05:15 +00:00
95d00ea75d
Introduce NetBSD/luna68k port into CVS repository.
2000-01-05 08:48:53 +00:00
44ec789012
don't need to background xfs now that it auto-backgrounds itself...
2000-01-04 05:20:51 +00:00
d732fa1812
etc files for mmeye
2000-01-02 10:04:26 +00:00
f2672a9b29
We need to put /usr in critical_filesystems_beforenet since rc.subr
...
("mount_critical_filesystems local") makes no assumptions about /usr.
Under certain (semi-normal) conditions, /usr is never mounted until
"mount -a" late in rc(8), and This Is Bad.
1999-12-31 04:42:02 +00:00
cabb78b63e
Add share/examples/apm/script, an example script to put into
...
/etc/apm/{line,battery,standby,...}
1999-12-29 04:16:21 +00:00
d30b9ad39c
installation/* are copied in `make release'.
1999-12-24 17:03:34 +00:00
0b330f40c5
Make nomenclature more sensible: INST_KERNELS -> EXTRA_INSTALL_KERNELS,
...
and pass it through to the instkernel/Makefile release target.
1999-12-24 15:14:29 +00:00
623ede0b32
nit-picking spaces at EOL
1999-12-23 15:07:21 +00:00
be53038389
Consistency nit - use X11 in all comments not sometimes x11
1999-12-23 12:22:13 +00:00
c2ca3a16f3
Add a comment about the ifconfig_xxN variables.
1999-12-22 22:55:49 +00:00
ae444c9104
flip "if" order in IPv6 initialization, avoid calling /bin/test.
...
From: soda
1999-12-20 15:51:14 +00:00
c7a34c1de0
check for IPv6 kernel by exit status of "ifconfig lo0 inet6".
...
now IPv6 portion of netstart does not require /usr mount, it will mount it
as necessary (like pppd configuration do).
thanks goes to christos for the tip.
1999-12-20 15:12:23 +00:00
6badb9eb2b
add comment about IPv4/v6 dual stack support (enable both tcp and tcp6).
1999-12-20 12:43:17 +00:00
e2c4e62e16
Correct md* entries.
1999-12-18 03:09:44 +00:00
d0955f732b
Add goo to build instkernel for mac68k as part of "make release". Actually,
...
multiple install kernels, by setting INST_KERNELS in /etc/mk.conf or the
environment, or on the command line. "INSTALL" is always added to the list.
1999-12-17 20:54:31 +00:00
2ab76be062
Add the "ig" directive to the PC console entry to avoid escape sequences
...
confusing the terminal. Should fix PR lib/8993 by Pierre Bourgin.
1999-12-15 17:34:00 +00:00
a2f13ea762
Create devices for apm, apmctl and tctrl0
1999-12-15 09:17:24 +00:00
47523083ea
support fully qualified machdep names.
1999-12-15 05:23:13 +00:00
2c7fa0c23b
Pick up a machine dependent ld.so.conf
1999-12-13 10:19:32 +00:00
a87378c54a
Prototype file that selects i387 if the fpu is present.
1999-12-13 10:17:49 +00:00
50d43dc788
Initial import of news68k port.
1999-12-09 15:10:37 +00:00
2dded70ce5
avoid transmitting invalid IPv6 packets out to the wire.
1999-12-09 14:18:07 +00:00
faba922c92
Make ./etc/skel and ./usr/share/examples/usermgmt with mtree, and don't
...
create the directory in the user(8) Makefile.
1999-12-06 22:44:47 +00:00
2d6fbd2789
Default to -z in savecore_flags
1999-12-06 20:38:13 +00:00
e90bd819cd
Create pty0 in install floppy. sysinst does use ptys.
1999-12-05 15:38:58 +00:00
604db10508
- Add '-F' option which forces rotation of logs (from FreeBSD).
...
- Add 'sigtype' field specifying signal to be sent (from FreeBSD).
- Add 'N' flag which specifies that no signal should be sent.
- Fix some breakage.
1999-11-30 12:03:24 +00:00
c683c60c73
recommend use of multi-line /etc/ifconfig.xxN than /etc/ifaliases, or
...
$ifaliases_xxN in /etc/rc.conf.
(no behavior change in /etc/netstart, comments only)
see recent tech-userlevel for discussions.
1999-11-29 01:40:33 +00:00
4eab2b28e4
Add directories for mvme68k MD man4 pages.
1999-11-28 17:32:16 +00:00
7bf20269f9
Add some boot time warnings:
...
- if ypserv=yes but portmap=no
- if yppasswdd=yes but ypserv=no
- if nfs_server=yes but portmap=no
Per discussion on tech-userlevel@netbsd.org .
1999-11-23 15:12:43 +00:00
acc78cad94
accounting should be controllable via $accounting=YES in rc.conf...
1999-11-23 08:05:04 +00:00
4dfd4a92a4
Disable rhosts check for now. Someone could stick in a fifo between the
...
-f .rhosts and the grep, and then we would get stuck.
1999-11-18 02:35:54 +00:00
0f6157b181
Remove update, it's no longer used.
1999-11-15 20:04:50 +00:00
c528d95e74
Remove unnecessary inclusion.
1999-11-14 16:23:36 +00:00
cae6f4efba
add a comment why screen 0 is commented out and when to uncomment it
1999-11-10 16:34:08 +00:00
eafd8f707f
Provide some more automation in the "make release" process. Also build
...
and install:
o INSTALL and INSTALL_TINY kernels (for boot floppy images)
o GENERIC_TINY kernel
o Boot floppy images
Ideas borrowed from etc/etc.sun3/ setup.
1999-11-09 00:22:39 +00:00
145c0fee52
Ignore blank lines in ifconfig.* files.
1999-11-08 09:29:24 +00:00
6c011bf076
Install root's .shrc.
1999-11-05 11:31:40 +00:00
c43c81eec7
(Ab?)use some sh(1) features:
...
* Put the aliases in a separate file, referenced by $ENV, so that they're
present in subshells.
* Do the same to make `set -o emacs' happen automatically in interactive
shells. (Yay, line editing by default!)
* Use `export FOO=bar' syntax, as it's shorter and other sh(1)-like shells
all support it these days.
1999-11-05 11:30:13 +00:00
80cfefa569
Disable portmap by default, and add some more comments in that section.
1999-11-05 11:19:49 +00:00
fbbc23fa6a
Disable everything except ftpd and telnetd by default.
1999-11-05 11:16:20 +00:00
2fad6a7a8e
Make cfs0 for Venus/Coda file system, by default (PR 8625).
1999-11-05 09:57:06 +00:00
165e56a44b
Add the audio devices.
1999-11-03 14:02:07 +00:00
1299db6b8b
Use checkyesno to check the state of $rc_configured like for any other
...
variable set in /etc/rc.conf. Pointed out by Erik Bertelsen
<erik@mediator.uni-c.dk> in pr 8522.
1999-10-30 12:35:30 +00:00
fe0c45f603
default for hosts has changed from `dns files' to `files dns'
1999-10-24 12:36:52 +00:00
ddcff2dcf5
Add an at.deny file by default, so that (by default) users can use at
...
and batch (as is historic practice, and as was our practice before
last year.) If someone wants to disable such use, they can just remove
the file.
1999-10-20 17:57:55 +00:00
0860075c8b
oops, wsmouse had same bad perms as wskbd
1999-10-19 23:19:38 +00:00
de4beb9532
Don't set wskbd* devices to 666, use 600 like every other arch, to
...
prevent random users remapping your console keyboard.
1999-10-19 22:26:52 +00:00
652f0f8841
Back out previous
1999-10-18 22:41:23 +00:00
569ef0062c
Add sparc MD parts to `make release'.
1999-10-18 20:39:01 +00:00
35133de28c
Add com device.
1999-10-15 12:26:07 +00:00
bd6a470b1b
Make the coda pseudo device cfs0.
1999-10-14 17:02:25 +00:00
6e5d9aa87d
Add -f /var/db/ntp.drift to default xntpd parameters.
1999-10-09 21:07:19 +00:00
4fa18183d7
Install example dhcpd.conf into /usr/share/examples/dhcp
1999-10-09 15:33:36 +00:00
6ef8563aed
Remove softcar from the example setting for dialup (commented).
...
(Thanks to Shuuichi Suyama <ghe02376@nifty.ne.jp> and msaitoh)
Use ttye0 for ITE instead of console.
1999-10-08 14:21:58 +00:00
1acb6189fd
Default terminal type of /dev/console is 'rcons'.
1999-10-06 22:47:58 +00:00
993ac32fff
Final chown user.group -> chown user:group changes.
1999-10-06 22:26:14 +00:00
0cb212b1fe
More user.group -> user:group pedantry (these are the loose ends).
1999-10-06 22:05:25 +00:00
9438e96c3b
More root.wheel -> root:wheel pedantry.
1999-10-06 22:01:56 +00:00
7713e57181
The user:group field is optional, so put it in brackets like the other
...
optional fields.
1999-10-06 21:59:50 +00:00
6933332596
Use a colon to seprate user and group name pairs.
1999-10-06 21:55:54 +00:00
cf5bc5acc8
Add [pidfile] to the description for last column.
1999-10-06 13:28:24 +00:00
d41c7fb2f8
Set a good example by using ':' to separate user/group names.
1999-10-05 12:12:39 +00:00
918f986a0c
move old dev_mkdb and "kvm_mkdb /netbsd" up into the section which builds
...
kvm_mkdb based on machdep.boot_kernel. also failover to "kvm_mkdb /netbsd".
1999-10-05 10:54:27 +00:00
d61e19af02
GENERIC kernel does not ship with IPv6, so comment out tcp6/udp6 entries.
1999-10-05 10:44:28 +00:00
e463468294
send sysctl machdep errors to /dev/null
...
merge in patches to implement multiple bootup configurations (look for
/etc/etc.current, /etc/etc.default and friends)
only start up NFS services if either nfs_client or nfs_server is yes.
1999-10-05 10:32:56 +00:00
eac2fbdb83
Add support for $defcorename
1999-09-28 14:53:17 +00:00
e7795f36b9
Use sendmail.cf from $DESTDIR/etc instead of /etc for building the
...
aliases.db since that fails if we have a sendmail.cf installed that
has no MAILER(local) like nullclient.
1999-09-26 21:40:13 +00:00
4ef94b0ae5
Add missing '/usr/share/man/man8/next68k'
1999-09-22 12:54:12 +00:00
bb9e6fa65a
remove empty line
1999-09-21 14:25:46 +00:00
e6c3e8cd07
Add MAKEDEV.8 manpage for next68k.
1999-09-21 14:20:36 +00:00
2199f8c078
Add /usr/share/{man,cat}8/bebox
1999-09-20 06:14:57 +00:00
1728cf76bb
fix up for automatically generated MAKEDEV.8
1999-09-20 00:22:17 +00:00
9dbf4f790e
edit for MAKEDEV.8
1999-09-20 00:04:17 +00:00
80c605fb9b
add cat8/hpcmips and man8/hpcmips
...
The person who added a man page for that section without adding the
corresponding directory should be lashed fifteen times with a wet
noodle. They broke the build.
If any other man pages are added for the sh3 and hpcmips ports, people
have to remember to add the corresponding directories to the mtree
files, okay?
1999-09-19 22:33:42 +00:00
018c7b4f42
Tidy up comments a bit, to make the manpages generated from the a bit
...
nicer. Also, add a comment on how to re-generate the manpages if the
MAKEDEV file was changed.
1999-09-18 00:23:35 +00:00
2f85eb6142
Import NetBSD/hpcmips source files from hpcmips repository.
...
file list:
sys/arch/hpcmips/
distrib/hpcmips/
etc/etc.hpcmips/
lib/libc/arch/mips/fplib/
lib/libc/arch/mips/fplib/Makefile.inc
lib/libc/arch/mips/fplib/environment.h
lib/libc/arch/mips/fplib/fplib_glue.c
lib/libc/arch/mips/fplib/fplib_libc.c
lib/libc/arch/mips/fplib/hpcmips-gcc.h
lib/libc/arch/mips/fplib/softfloat-macros.h
lib/libc/arch/mips/fplib/softfloat-specialize.h
lib/libc/arch/mips/fplib/softfloat.c
lib/libc/arch/mips/fplib/softfloat.h
lib/libc/arch/mips/gen/ieee.h
lib/libc/arch/mips/gen/sf_fabs.c
lib/libc/arch/mips/gen/sf_flt_rounds.c
lib/libc/arch/mips/gen/sf_fpgetmask.c
lib/libc/arch/mips/gen/sf_fpgetround.c
lib/libc/arch/mips/gen/sf_fpgetsticky.c
lib/libc/arch/mips/gen/sf_fpsetmask.c
lib/libc/arch/mips/gen/sf_fpsetround.c
lib/libc/arch/mips/gen/sf_fpsetsticky.c
lib/libc/arch/mips/gen/sf_isinf.c
lib/libc/arch/mips/gen/sf_ldexp.c
lib/libc/arch/mips/gen/sf_modf.c
1999-09-16 12:13:17 +00:00
50e510e367
If machdep.booted_kernel can be found in sysctl output, feed that name into
...
kvm_mkdb so that when we boot we always have an upto-date kvm db, allowing
dmesg and friends to run without error when we do "boot netbsd.fun" to test
kernels, etc.
1999-09-16 11:00:44 +00:00
ef22c28d6f
Use ${CONFIG} rather than config so cross-builds can correctly select which one to use.
1999-09-16 00:30:06 +00:00
62d46f73e8
Improve the USB comments.
1999-09-15 21:18:10 +00:00
4f2d454a07
Synchronize comments with reality.
1999-09-15 20:31:53 +00:00
8a0d5201d1
use sysctl -n to get numeric result, not awk.
1999-09-06 18:52:33 +00:00
4220708c27
We already had logic not to try to grab the disklabels of md's and
...
fd's -- add cd's to the list.
1999-09-05 15:11:42 +00:00
02972f5985
add sanity check on rtadvd invocation (allowed on IPv6 routers only).
...
add rc.conf entry for rtsold.
1999-09-03 13:40:15 +00:00
5d7288c24d
Increase md size to 2MB.
1999-08-28 16:49:49 +00:00
4de82f14e2
check if vi recovery files are regular files before trying to e-mail them.
...
Stops a denial of service attack where the user can put a named pipe or
any other device that blocks i/o in /var/tmp/vi.recover/recover.*
[from dynamo@ime.net ]
1999-08-28 03:39:59 +00:00
bcf1e2dcad
Add a comment about ttyU*.
1999-08-27 14:13:32 +00:00
22bead680a
Define the callunit variable for ttyU*.
1999-08-27 14:10:51 +00:00
082fa5a748
Move ttyU* before tty*, otherwise it will not work to make ttyU device nodes.
1999-08-27 14:06:05 +00:00
5ca2c8ac27
Make creation of wsmux devices a little less confusing.
1999-08-25 23:06:46 +00:00
f9a2f82b87
Add off entries for serial boards
1999-08-25 20:53:15 +00:00
193cb891af
switch ttye* off, and switch /dev/console on.
...
This way:
- screenblank works
- we don't need to change ttys just to get console login working.
1999-08-25 20:37:10 +00:00
b729f2c755
Use ${INSTPRIV} with ${INSTALL}.
1999-08-21 06:27:29 +00:00
243ba7a176
Rename umodem to ttyU. If it walks like a tty and quacks like a tty
...
it's a tty.
1999-08-17 20:06:57 +00:00
db574ba708
Add umodem device.
1999-08-16 22:27:08 +00:00
79de537d1c
Screenblank has supported more than sun3 and sparc for a long, long time.
1999-08-16 20:01:03 +00:00
7804500eab
Added new directory for mount_portal examples
1999-08-16 06:31:08 +00:00
6bac342db0
Create temp _motd file in /etc
1999-08-05 20:51:57 +00:00
4daf634ae3
- use -msafer not -S; this is more portable and will work with any
...
nroff that has the "safer" macros installed.
- correct entry for ".me" that was broken in the previous.
1999-08-02 10:43:30 +00:00
8e2f403f42
Add ttyC? devices for com devices.
1999-07-31 00:00:03 +00:00
8fd15316c9
Forgot /usr/include/ss (for krb5).
1999-07-30 19:40:25 +00:00
b9070123b4
Kerberos5 install paths.
1999-07-30 19:25:19 +00:00
0336dc8e2c
Add mux 1 as a keyboard.
1999-07-29 19:26:08 +00:00
595da53663
Make wsmux devices.
1999-07-29 19:24:37 +00:00
42a7d5014d
Add some DHU-11/DHV-11 lines - from bdc@world.std.com
1999-07-28 00:58:14 +00:00
a992b9baef
Fix PR security/8069 differently:
...
Add a new option "-S" to "nroff" and use "nroff -S" instead of "groff -S"
because "nroff" adds some other (moderately useful and important) options
to the "groff" execution.
1999-07-26 19:31:53 +00:00
3a0a25ad87
Use "groff -S -Tascii" instead of "nroff" to avoid security problems
...
if "man" is used by "root". Fixes PR security/8069 by Matthias Buelow.
1999-07-26 18:42:21 +00:00
1955b0db93
Put back pcs750.bin entries that were deleted in an overzealous cleanup
1999-07-25 04:23:49 +00:00
75fd3e78bb
From Dave Huang (khym@bga.com) in PR 8059: the MAKEDEV script was trying
...
to create ttyNN as the dialout device instead of dtyNN.
1999-07-25 00:47:40 +00:00
7cd460ef5e
add openssl config, include and examples directories.
1999-07-23 01:04:02 +00:00
805851f4c7
Provide a script to compute the distribution set checksums.
...
Make the Makefile use it, instead of calling cksum manually.
1999-07-22 20:10:16 +00:00
3b55c25ad2
Teach both mac68k and macppc to create dialout devices. Modeled after
...
etc.i386/MAKEDEV's support.
1999-07-22 18:46:26 +00:00
8b10c79f68
Use standard variable "$0" for the whole line instead of the non-standard,
...
undocumented "$LINE".
Submitted in PR 7041 by Greg A. Woods <woods@weird.com>
1999-07-22 00:47:50 +00:00
b28948e638
Make an aliases.db file when we install the aliases file.
1999-07-21 06:51:30 +00:00
bb69dd0964
bind comes with a very helpful sample named.conf, so install it in
...
/usr/share/examples/named. I'm not overwhelmed about moving the file
into src/share/examples but there is prior art (amd).
1999-07-19 02:30:43 +00:00
47b0e5ff1d
IPv6 support.
1999-07-12 20:17:09 +00:00
735b324857
Add "audio" target to create links "audio", "audioctl", "mixer" and
...
"sound" pointing to the first unit's device nodes.
1999-07-12 09:33:59 +00:00
db20439533
repair diskless startup: "netstart" needs "sysctl" and "awk" now, thus
...
"/usr" must be mounted. mount_critical_filesystems() didn't mount it,
even if listed in "critical_filesystems", if it is nfs.
Solution: introduce another rc.conf variable
"critical_filesystems_beforenet" which contains filesystems to be mounted
before "netstart".
Perhaps "netstart" should be split up, but this would make things even
more complex...
1999-07-07 21:24:56 +00:00
ec3e468086
sparc and i386 do not have ld.so.conf anymore now that they're switched
...
(or about to switch) to ELF.
1999-07-04 22:11:06 +00:00
5dd420a030
Add ipl and raid to 'MAKEDEV all'
1999-07-04 16:01:55 +00:00
64532f71cf
Add 'ipl' to 'MAKEDEV all'
1999-07-04 16:01:04 +00:00
a7e88d2896
hide sysctl error messages to stderr (on checking IPv6 config values)
1999-07-04 12:51:30 +00:00
1f8a1d54df
remove echo statement (was mostly for debugging).
1999-07-04 05:20:52 +00:00
5c3edd7b4b
RCS Id police
1999-07-03 20:50:39 +00:00
3c322b415a
comment out sample entry. document it a bit.
...
From: Hubert Feyrer
1999-07-03 18:09:47 +00:00
7dcdb97971
remove unnecessary sleep (for DAD wait) in IPv6 configuration.
1999-07-03 03:40:52 +00:00
94e64335b4
add IPv6 configuration (ip6forwarding, rtsol, route6d and rtadvd).
...
Right now netsetart does not bother you even if you do not have
"options INET6" in the kernel.
1999-07-03 03:29:29 +00:00
134b5f49f2
rtadvd: advertise IPv6 prefix info via router advertisement.
...
(to be run on routers)
1999-07-02 09:28:16 +00:00
90db061921
add telnet on tcp6.
1999-07-02 06:32:32 +00:00
5202885909
provide sample lines for IPv6 services (at this moment ftpd and fingerd)
1999-07-02 06:05:21 +00:00
59c991a23e
Document BUILD_KERNELS.
1999-06-30 18:42:03 +00:00
6e3b6566ce
* Define INSTALLATION_DIRS and BUILD_KERNELS.
...
* Build in src/distrib
* Call the new release targets in src/distrib/{alpha,notes}
Note: The notes installation command is MI and should eventually move
to somewhere in ../Makefile
1999-06-30 18:39:37 +00:00
aed7c5dbd9
usbd is dead.
1999-06-30 06:48:05 +00:00
87d31b1197
Move 'random*' before 'ra*'. Now 'MAKEDEV all' works.
1999-06-27 20:06:48 +00:00
4ab98c0660
Move 'raid*' before 'ra*' in case statement to avoid false match of ra*
...
against 'raid{0,1,2}'.
1999-06-27 20:01:49 +00:00
36f7421c84
the memory disk ('md') driver is just the standard machine-independent
...
driver. Therefore, create and name its device nodes in the normal way.
1999-06-27 00:17:31 +00:00
3a7a276df9
sysinst won't work without ptys on the ramdisk image. (*sigh* How
...
well was sysinst tested for 1.4...)
1999-06-26 22:58:06 +00:00
fe0ddd929f
oops: also need to update the geometry
1999-06-26 07:33:23 +00:00
ddb7bb9480
since all of the arm32 kernels provide 3400 blocks of ramdisk space, we
...
ought to use it (and not just 3200 blocks).
1999-06-26 06:50:20 +00:00
c3d7eff366
Change permission of grf, mouse, kbd to disallow access by no-root users.
1999-06-25 15:11:02 +00:00
d14a108b4c
we have no group root by default, set gname=wheel for include.
1999-06-23 17:12:15 +00:00
55d7fbaef8
Change /etc/mtree/special and /etc/sendmail.cf to mode 444, and
...
/usr/include to owner:group root:wheel, to match how these files
are shipped in a distribution.
From PR misc/6736 from Soren Jorvang.
1999-06-18 05:06:45 +00:00
ce030a27e0
ptys should not be marked secure.
1999-06-18 04:57:01 +00:00
f85ff94580
Don't don't don't assume /usr/bin/id is always present. Loses in single user.
1999-06-15 05:44:22 +00:00
412733582c
typo
1999-06-09 01:45:49 +00:00
efffa3db54
Make sure fd is a directory before we df it.
1999-06-09 01:39:29 +00:00
ff1d4cab4a
Add FALCON to EXTRA_KERNELS.
1999-06-07 14:44:46 +00:00
7658a91815
Create *wd[23]? device nodes, so that machines with more than two IDE
...
drives can be installed.
XXX The 1.4 single-floppy install has only 24 free inodes, but 32 are needed
by this. Some more work is needed (e.g., change newfs parameters for the
ram disk, or switch back to a 2-floppy install).
1999-05-31 11:14:07 +00:00
364d5a1432
Correct the dhclient startup to follow the standard indentation style
1999-05-28 21:01:42 +00:00
a3f17d2959
Don't barf when we have fdesc mounted. Just skip the devices fdesc provides
1999-05-28 21:00:50 +00:00
93720b922f
Define our own snap_kern target that builds all the kernels, but
...
does not install the un-patched ramdisk kernels. The snap_md_post
target builds the installation ramdisk image, patches that into the
ramdisk kernels, and installs them. Also the miniroot.
Automated snapshot build works now.
1999-05-21 04:02:02 +00:00
551aad7b51
The snap_kern target is not sufficiently flexible.
...
Allow Makefile.in to provide its own.
1999-05-21 03:45:50 +00:00
1e4c25754e
* document `shells' default (suggested by cgd)
...
* for each database, list supported sources (it's useful to know)
1999-05-19 02:25:14 +00:00
2fe3ffc188
Modify (commented out, pre-existing) identd line to start identd `nowait'
...
for those who want to use tcpwrappers appropriately.
Resist temptation to add -L"something appropriate"
1999-05-18 22:20:07 +00:00
a9233886c4
Increase ramdisk size
1999-05-18 07:51:34 +00:00
05bdcfc198
Minor wording change in a comment (also formerly known as -> formerly known as)
1999-05-18 03:30:02 +00:00
f2a23c575b
updates for the 1.4 release
1999-05-17 03:35:55 +00:00
6e4e1ddc27
connect a keyboard to the display
1999-05-15 14:28:14 +00:00
55adfd0a58
Support a second tape and cd drive on installation ramdisks.
1999-05-13 22:08:48 +00:00
c889455b1c
Add 4 lpt nodes
1999-05-11 20:45:38 +00:00
e845da9348
fix spelling
1999-05-08 01:09:09 +00:00
7c5c9764b5
turn off ttyE[123] by default -- default installs don't configure them.
1999-05-01 00:23:27 +00:00
56d7789c45
New systems should NOT ship with /usr/pkg/lib or /usr/X11R6/lib in
...
ld.so.conf. (Frankly, new systems shouldn't ship with a ld.so.conf.) We
use rpath for that purpose now. Unfortunately, 1.4 won't have this
change, so it will be in 1.4.1.
1999-05-01 00:06:20 +00:00
7552438f3f
Add the tty device-nodes on the install floppy. You'll need them for
...
slip connections.
1999-04-30 19:05:47 +00:00
9c072e268f
make -s flags for syslogd and lpd the default
1999-04-29 18:26:43 +00:00
bc05796ee2
Set console and ttyE? term types to vt100.
1999-04-29 01:26:15 +00:00
5e40cf296d
Move the knowledge that /usr and /var should be mounted early from
...
rc.subr to the default rc.conf.
While this is no longer necessary to supress noise,
it increases the clarity of the situation and removes
one more bit of what should be adjustable configuration
from scripts that site admins shouldn't have to edit.
Addresses PRs misc/7406 and (partially) bin/7491.
1999-04-28 23:32:29 +00:00
bdd6ce47a7
Greatly simplify by doing the moral equivalent of
...
cd ../distrib/pmax && make install
1999-04-27 12:32:08 +00:00
31aebad029
+ Build (but don't install) INSTALL and RAMDISK kernels.
...
+ Make installation/diskimage installation/netboot in ${RELEASEDIR}
+ snap_md_post depends on the diskimage, the diskimage tar file and
the install kernel, and installs these into the right places in
${RELEASEDIR}.
1999-04-27 04:36:25 +00:00
ae25beb28c
+ Put directories to create in ${RELEASEDIR} into a variable that
...
port-specific Makefiles can add to.
+ Separate snap_md into snap_md_pre and snap_md_post that are depended
on before and after snap_kern.
+ Build all kernels listing in ${BUILD_KERNELS}, but don't put them in
${RELEASEDIR}.
1999-04-27 03:08:02 +00:00
eebf5c0180
Add code for creating pxN. px{0-2} are created as part of std.
1999-04-26 04:46:46 +00:00
adb6375b6b
Add a 'ramdisk' target, and create ptys on both ramdisk and floppy
...
(Needed for sysinst).
1999-04-26 04:20:04 +00:00
51a0d74d06
fixed syntax for using an nfs mounted mfs partition
1999-04-24 19:57:11 +00:00
9e14da1db9
change default console terminal type to "unknown" instead of "dumb"
1999-04-24 19:20:46 +00:00
018f256ee3
Added example mfs /tmp in fstab
...
Added wscons entries in ttys, but leave default "console" enabled
since some hardware still uses the serial port console
1999-04-24 19:19:48 +00:00
1c98ea4e2a
+ttyEcfg
1999-04-23 18:45:50 +00:00
5a6330ac23
typo
1999-04-23 18:14:29 +00:00
357a0baaf8
Get rid of old-style chown operands.
1999-04-23 08:20:28 +00:00
11f13fe80d
Remove comment about critfs_requires_network, which has gone away
1999-04-21 21:58:29 +00:00
3cc8bf22d2
Configure wscons much earlier so that a virtual console can e.g. be
...
used for "syslogd" output.
1999-04-13 07:40:53 +00:00
ff5615a44f
build ipfilter devices by default.
1999-04-13 06:45:36 +00:00
1a3bfc2c1b
When checking local status, jJust ignore not-found filesystems, rather
...
than printing an error, just as we do when we try to mount it.
1999-04-13 02:15:49 +00:00
31f06c6bd1
OK, adjust the kernel finder one more time to handle the case of a config
...
file that just does "include" GENERIC, and therefore has no "config" line.
It's simplest to assume that "netbsd" will be the result in that case.
Rather than duplicate config(8)'s parser in awk (or something), we should
adjust config to parse the config file and spit out the kernel names, and
then use that to replace this awk script thing.
1999-04-10 04:41:52 +00:00
193be65e25
under "minimal" correct a tyop: wsbkd0 -> wskbd0
1999-04-09 22:22:17 +00:00
0a40032913
Turn on building of A7000 CATS EBSA285 RISCPC SHARK kernels for releases.
1999-04-09 21:29:21 +00:00
e6bc2dc3c6
Add a note about critfs_requires_network on dhclient line.
1999-04-09 15:18:51 +00:00
6b39fd9da6
add a comment explaining how "pcvt" fonts can be used
1999-04-08 10:58:36 +00:00
d023c654fd
Slight tweak to the EXTRA_KERNELS build commands to work around a shell
...
parsing wierdness.
1999-04-08 08:24:44 +00:00
a6a272d18a
Add "_crunch" section required by catman to crunch compressed cat pages.
1999-04-04 11:02:09 +00:00
0d59551634
Avoid using id(1), as this loses when /usr isn't mounted.
1999-04-04 09:58:57 +00:00
5048fc1b17
NetBSD's very clever kernel build system can make more than one
...
kernel per config file and the resulting kernel need not be named
"netbsd"; therefore paw through the config file after the kernel
builds are done, find them all, and put them where they belong per
release(7). This all done with some clever awk/sh scripting, from
PR 7180 by David Forbes.
1999-04-04 09:57:11 +00:00
2f7a39463f
Create /var/log/aculog with appropriate permissions, per PR 6675
1999-04-03 09:40:38 +00:00
252a967372
Change to make ownership of /var/msgs "daemon" per PR 6672
1999-04-03 09:36:04 +00:00
668efbbcec
Change mount_critical_filesystems() so that if given an argument
...
of "local" it will not mount filesystem types it identifies as
network file systems (currently just nfs). Call the function twice,
before networking starts with arg "local", after networking starts
with arg "network". Remove critfs_require_network as is now redundant.
1999-04-01 03:58:44 +00:00
b779dad4d4
Add hup, ll and x shell functions similar to the aliases in dot.cshrc
...
plus set the prompt. Tested with /bin/sh and /bin/ksh.
1999-03-30 02:36:05 +00:00
7824e2333c
NO_POSTFIX should have been BUILD_POSTFIX with reversed sense.
1999-03-29 16:40:44 +00:00
e8d9f12b08
Add a NO_POSTFIX check to allow \'make distribution\' to work.
1999-03-28 21:31:11 +00:00
3018f8d67b
postfix support.
1999-03-27 05:17:08 +00:00
b4bf620b49
add postfix
1999-03-27 05:13:55 +00:00
4fc0cc79b3
If we have an 'operator' user, it should at least be gid operator.
1999-03-27 03:51:41 +00:00
e75fc73f95
add postfix uid/gid, maildrop gid
1999-03-27 01:44:37 +00:00
4603b8460d
start xdm after wscons configuration - the X server might want an own
...
virtual screen
1999-03-26 13:45:47 +00:00
5a90dbf495
Add dhcrelay startup (allow only if dhcpd isn't started)
1999-03-26 13:10:17 +00:00
3423145ca4
Add md0 to the raminst target.
1999-03-26 08:45:25 +00:00
202cdd3fa1
build audio[0123] links.
1999-03-26 04:37:29 +00:00
9fe0d93bdb
Nuke the line 'raidctl -r raid$dev'. a) The '-r' option is now '-i', and
...
b) with component labels and clean-bits working, this shouldn't be
required at all on each boot! Thanks to Andrew Gillham for pointing this out.
1999-03-26 01:11:45 +00:00
29fbd4fd08
change user `nobody's group from 9999 (non-existant) to 39 (group `nobody').
...
from Soren S. Jorvang <soren@t.dk> in [misc/6806]
1999-03-25 07:00:43 +00:00
cb9aa929b6
add ttyEcfg
1999-03-24 23:46:37 +00:00
d8f89f1b7b
install wscons.conf
1999-03-24 20:12:21 +00:00
61b6b3bfec
- Support dhclient and dhclient_flags rc.conf variables.
...
- Start dhcp client if dhclient==YES.
1999-03-24 19:03:10 +00:00
8572695519
- Move critical filesystem mounting code into a shell function and put
...
that in rc.subr.
- Support critfs_require_network rc.conf variable.
1999-03-24 18:59:47 +00:00
fce1081120
Add critfs_require_network, dhclient and dhclient_flags variables.
1999-03-24 18:50:07 +00:00
18e25765c1
Add ttyEcfg.
1999-03-22 14:05:34 +00:00
6ba6fa5b90
Add ttyE? lines for wscons.
1999-03-22 10:25:52 +00:00
8e621ce2ee
Add MIDI and sequencer devices. They seem to work, even.
1999-03-22 07:52:56 +00:00
0d8649853c
Add the ttyEcfg devices and create the wscons devices as standard.
1999-03-20 03:00:20 +00:00
835e4d99ed
change to new syslog socket. make symlink from old to new location, too.
1999-03-19 00:35:44 +00:00
ee6f8c2579
Add a commented-out duplicate id checker which doesn't exclude toor, and
...
add a comment saying how to switch it on.
1999-03-17 19:11:05 +00:00
1cc109aa7d
rc.wscons can take arguments, so we shouldn't simply source it but exec in
...
a subshell. Being here, add a prototype wscons_flags variable.
1999-03-17 15:49:47 +00:00
56fe49bc20
toor is back, disabled by default as before.
1999-03-17 03:01:54 +00:00
d32be9a273
Modify duplicate user id check to exclude "toor". Any other uid 0
...
accounts will generate a message with that (those) account names, root, and
toor present in the list.
1999-03-17 02:58:11 +00:00
9380518844
Revert to status quo ante (root's shell is csh, per BSD tradition),
...
pending the proper procedures for making such a change.
1999-03-16 23:24:02 +00:00
5d88663f76
Add the dty (dialout) device nodes for the serial driver.
1999-03-16 11:00:46 +00:00
7153b55a87
Fix PR 5068 - scanning ~user/.rhosts files on NFS mounted home
...
directories with -maproot=nobody on the server. The argument to be
made is that if NetBSD's root can't read these files, it shouldn't
try to check them.
1999-03-16 06:18:17 +00:00
294d60fff0
Make wscons configuration nicer: split database and configuration script.
...
From Matthew Green.
1999-03-15 22:02:24 +00:00
3f7861830b
This was not intended to be committed - back out.
1999-03-15 16:42:46 +00:00
8613009f6a
Give root a Bourne shell.
1999-03-15 16:36:38 +00:00
eb710b1b56
It was just Plain Wrong to ship a password file that triggers /etc/security.
...
Remove toor - if people want another root account, we'll assume they can
copy and modify the root line.
1999-03-14 20:11:06 +00:00
0fc97689ec
introduce a "wscons" rc.conf flag and run /etc/rc.wscons from /etc/rc
...
if it is set
1999-03-14 14:04:40 +00:00
b0d64df6ba
first cut on a wscons configuration script
...
(to be included in / sourced from rc.local)
1999-03-13 14:54:22 +00:00
a443f8c15c
Make the includes and install targets consistent, and shove the
...
ugly hack into the etc/Makefile distribution target instead of
the top-level build target. Problem noted by Mycroft.
1999-03-10 19:10:14 +00:00
1fad0940a8
Need pseudo-ttys on INSTALL disk now (due to sysinst).
1999-03-09 19:31:00 +00:00
34d3f1c35f
Add comment that release is a synonym for snapshot, and make release
...
present everywhere snapshot is.
1999-03-08 02:37:56 +00:00
73230d62d0
Only install ld.so.conf on machines where we install ld.aout_so.
1999-03-05 07:21:44 +00:00
93466b768a
/var/spool/ftp/pub (if present) is better 0775 thane 0777.
...
From Paul Goyette <paul@whooppee.com>
1999-03-05 05:54:23 +00:00
33403acaba
If ppp_peers is set, ensure /usr is mounted since pppd is in /usr.
...
(Modeled on rc.lkm setup)
1999-03-02 23:10:17 +00:00
f4db3c5d7a
Add target for raid devices.
1999-02-27 17:57:31 +00:00
cc2777e5d4
Add pty0 to "floppy".
1999-02-26 12:01:36 +00:00
37c5e1f843
Some machines actually do have two floppy drives.
1999-02-23 14:56:26 +00:00
c326e60e4c
Fix the ttyC*and ttyZ* entries to correctly parse the unit number.
1999-02-21 18:09:24 +00:00
332dbe4b37
Fix a typo noticed by Frederick Bruckman (fb@enteract.com) in PR#7023.
1999-02-21 00:34:43 +00:00
2a3b5c65d2
It's about time we had an /etc/fstab example with SCSI disks.
1999-02-20 00:22:43 +00:00
b50caeda28
Update MAKEDEV to create cd2401 tty devices. Add getty entries in
...
"/etc/ttys" for same.
1999-02-20 00:21:28 +00:00
72e04f8dd5
Make "make release" work without US domestic source
...
and with more than one extra kernels.
1999-02-19 05:58:40 +00:00
108440dc7b
The "secr" set is not made by default by maketars; add stuff to
...
make it unless EXPORTABLE_SYSTEM is set.
1999-02-18 19:42:51 +00:00
36fe2839e4
Remove "tar" command from EXTRA_KERNELS section; those files are
...
expected to be ".gz" not ".tgz"
1999-02-18 19:03:44 +00:00
dade5b2993
Handle + in master.passwd (From PR#4802).
...
Also, handle + in group and allow max_loginlen to be configurable.
1999-02-18 18:53:32 +00:00
150ff2fe29
Add fd*, and create fd0 in the default set of devices.
1999-02-18 07:36:57 +00:00
6ccd18ba1f
remove duplicate aliases
1999-02-14 00:43:38 +00:00
dcab0210a0
convert from NOxxx= to MKxxx=no.
...
include <bsd.own.mk> if testing a MKxxx variable.
1999-02-13 02:54:17 +00:00
205851f433
Use slightly cleaner syntax for release/snapshot target.
1999-02-11 22:48:11 +00:00
f0ddf07eb2
Add a `release' target, which is a synonym for `snapshot.'
1999-02-11 18:19:21 +00:00
7ad02c1392
Add some more directories under /usr/share/locale.
1999-02-11 17:10:13 +00:00
1a71527c29
Add /usr/share/info, and /usr/share/locale/{de,fr}/LC_MESSAGES.
1999-02-11 14:39:35 +00:00
c95ddabf17
Change a BUILD to an UPDATE that I missed in the last commit.
1999-02-09 19:55:58 +00:00
caacb26e31
Make a /usr/share/ldscripts directory.
1999-02-09 17:41:13 +00:00
fb1e232640
Remove /usr/include/bfd.
1999-02-09 17:35:27 +00:00
6f443e73b3
No need to involve awk in the securelevel part, since sysctl has the -n switch.
...
Pointed out by NAKAJIMA Yoshihiro.
1999-02-07 14:56:01 +00:00
c8a68d41ad
.ifndef BUILD should be .ifndef UPDATE (to avoid `make clean').
1999-02-07 06:51:41 +00:00
cad34284f4
Use peers too when setting the time via ntpdate.
1999-02-07 00:47:08 +00:00
1b01f4840e
Add missing '' for awk in the securelevel part.
1999-02-06 23:22:31 +00:00
matt