copyright. Confirmed by Mike Hibler, mike at cs.utah.edu - thanks!
Also, merge UCB and Utah copyright texts back into one, as they
originally were.
Extra verification by snj@.
options EXEC_ELF32, EXEC_SCRIPTS, and CPU_IN_CKSUM for md cpu_in_cksum.c
- make all m68k ports include common arch/m68k/conf/std.m68k
from MD std.${MACHINE}
M680[12346] are now available from opt_m68k_arch.h. FPSP meantioned
in the PR has already been fixed, and i could not find any more.
i built these kernels to ensure i did not break their builds:
amiga: GENERIC DRACO
atari: HADES FALCON MILAN-PCIIDE
mac68k: GENERIC
sun2: GENERIC
sun3: GENERIC GENERIC3X
cesfic: attempted GENERIC, does not build due to lack of machine/bus.h
hp300: GENERIC
luna68k: GENERIC
mvme68k: GENERIC
news68k: GENERIC
next68k: GENERIC
x68k: GENERIC
on the amount of physical memory and limited by NMBCLUSTERS if present.
Architectures without direct mapping also limit it based on the kmem_map
size, which is used as backing store. On i386 and ARM, the maximum KVA
used for mbuf clusters is limited to 64MB by default.
The old default limits and limits based on GATEWAY have been removed.
key_registered_sb_max is hard-wired to a value derived from 2048
clusters.
#if NBPFILTER is no longer required in the client. This change
doesn't yet add support for loading bpf as a module, since drivers
can register before bpf is attached. However, callers of bpf can
now be modularized.
Dynamically loadable bpf could probably be done fairly easily with
coordination from the stub driver and the real driver by registering
attachments in the stub before the real driver is loaded and doing
a handoff. ... and I'm not going to ponder the depths of unload
here.
Tested with i386/MONOLITHIC, modified MONOLITHIC without bpf and rump.
- use SYSMAP_VA, SEGSHIFT for Sysmap address and table entries
- use TIA_SIZE, TIB_SIZE for sizes of table entries
Now page size dependent numbers are almost replaced with proper macro.
Tested on atari, hp300, and news68k.
Also explicitly set uvmexp.pagesize to prepare 8KB/page settings.
XXX: There is #ifdef !defined(amiga) && !defined(atari) workaround
XXX: because they have different pmap initialization functions.
- move macro SEGSHIFT, NBSEG, and SEGOFSET from <machine/param.h>
to <m68k/pmap_motorola.h> where they should belong
- also simplify NBSEG macro for both 020/030 and 040/060 cases
- also move m68k_trunc_seg(), m68k_round_seg(), and m68k_seg_offset()
(that use SEGOFSET) from <m68k/param.h> to <m68k/pmap_motorola.h>
- add comments about each segment size value used on pmap_motorola
implementation
- add TIA_SIZE, TIA_SHIFT, TIB_SIZE, and TIB_SHIFT macro which can be
used for ste/pte index sizes
- use proper vaddr_t cast instead of unsigned for SEGOFSET/PGOFSET macro
Tested on atari, hp300, and news68k.
They were incorrect since 1997 on amiga and atari, and since 2002
on other ports, but fortunately they don't look so fatal.
Anyway, these values will be moved into <m68k/pmap_motorola.h> soon
since they are quite pmap implementation dependent.
from MD pmap bootstrap sources to common pmap_bootstrap_finalize().
Tested on atari, hp300, mac68k, and news68k.
XXX: Why is protection_codes[] array initialized at run time?
- for 040/060, move L2 descs for Sysptmap from the last L2 block in segment
table pages to the contiguous block with ones for segment table mappings
- for 020/030, invalidate ste and pte entries separately since
ste size (TIA_SIZE) and pte size (TIB_SIZE) could be different
on 8KB/page systems
Tested on hp300 (040), mac68k (LC040), and news68k (030)
(and untested on others).
XXX: some more stuff in pmap_bootstrap.c could be moved into
XXX: common pmap_bootstrap_finalize()?
between other page tables to use different mappings for ste/pte pages
as well as amiga and atari. Should resolve XXX comments in next68k and x68k.
Tested on hp300 and mac68k.
- Addresses the issue described in PR/38828.
- Some simplification in threading and sleepq subsystems.
- Eliminates pmap_collect() and, as a side note, allows pmap optimisations.
- Eliminates XS_CTL_DATA_ONSTACK in scsipi code.
- Avoids few scans on LWP list and thus potentially long holds of proc_lock.
- Cuts ~1.5k lines of code. Reduces amd64 kernel size by ~4k.
- Removes __SWAP_BROKEN cases.
Tested on x86, mips, acorn32 (thanks <mpumford>) and partly tested on
acorn26 (thanks to <bjh21>).
Discussed on <tech-kern>, reviewed by <ad>.
The head of the list is now a pv_header, which contains the first pv_entry
as well as a 16-bit attributes field (replaces the pmap_attributes array
plus the pv_entry::pv_flags field) as a 16-bit count of caller-specified
cache-inhibited mappings.
Tested on hp300 (shared pmap_motorola.c), changes to atari and amiga copies
are purely mechanical.
There are still about 1600 left, but they have ',' or /* ... */
in the actual variable definitions - which my awk script doesn't handle.
There are also many that need () -> (void).
(The script does handle misordered arguments.)
virtual_end, and protection_codes[] to common <m68k/pmap_motorola.h>,
and also make protection_codes[] unsigned.
XXX: avail_start and avail_end should also be moved, but it causes
XXX: -Wshadow warnings in uvm/uvm_page.c:uvm_page_physload() and
XXX: I don't have a good idea of alternative names for now.
(where MMU is not enabled yet) and make kernel_pmap_store static again.
Also consistently use uintptr_t on address conversion in RELOC() macro.
Tested on hp300 (PA != VA) and news68k (PA == VA).
phases, so move the initialization of the ksyms mutex back into main via
a function called ksyms_init. Rename the existing (but quite different)
ksyms_init* variations into ksyms_addsyms_elf() and ksyms_addsyms_explicit()
and adapt machdep code accordingly.
doshutdownhooks(9): shutdown hooks registered by shutdownhook_establish(9)
expect to be called with interrupts disabled, but shutdown hooks
registered with pmf_device_register1(9) expect to be called with
interrupts enabled. So I have made two changes:
1 Do not call pmf_system_shutdown() from doshutdownhooks(). Instead,
change every call to doshutdownhooks() to a call to doshutdownhooks()
followed by a call to pmf_system_shutdown(). No functional change
is intended by this change.
2 Make i386 re-enable interrupts briefly while it calls
pmf_system_shutdown(). I leave it to others either to fix the
other ports, or to factor out some MI shutdown code, as joerg@
suggests, and fix that. Note that a functional change *is* intended
by this change.
I hope that this patch will stop us from flip-flopping between
calling doshutdownhooks() and pmf_system_shutdown() sometimes with
and sometimes without interrupts enabled.
we no longer need to guard against access from hardware interrupt handlers.
Additionally, if cloning a process with CLONE_SIGHAND, arrange to have the
child process share the parent's lock so that signal state may be kept in
sync. Partially addresses PR kern/37437.
them in the mi "files" file, and remove include statements from md files.
These shouldn't pull in additional kernel code when not in use, so it
shouldn't do any harm except a risk of namespace collisions which
should be easy to fix.
- Reduce available SPL levels for hardware devices to none, vm, sched, high.
- Acquire kernel_lock only for interrupts at IPL_VM.
- Implement threaded soft interrupts.
SEMMNI, SEMMNS, SEMUME and SHMMAXPGS.
They can be tweaked via sysctl now. Ports that were setting values on
them weren't touched, I only removed the ones that were commented out.
This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.
TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.
NOTES:
pmppc was removed as an arch, and moved to a evbppc target.
transfer as a write to ensure the memory is writable before starting any
transfer. The fault status information does not reflect this in the 'read'
status bit (i.e. it shows up as a read access), so faults with a RMW access
to non-writable memory was not getting the correct protection. The page would
be read-only and the instruction would fault over and over.
A specific example is when a process forks, and the child process attempts
to execute a RMW access to a data page, which is read-only because it's CoP
Copy-On-Write.
When checking if the page needs to be writablek, also check the locked transfer
and treat any locked transfer as a write.
68060 already handled this correctly, since it has separate read and write
fault bits, and both are set on a RMW access and the trap code was checking
the write status bit.
Fixes PR#36848.
was optimizing away modifications to the frame contents (it's not nice to
trick gcc). Pass the pointer as the first argument to reduce the number
of places that would be changed otherwise. Fixes the getcwd regression
test on most m68k ports.
buildable state after the yamt-idlelwp merge.
Struct cpu_info now must contain ci_want_resched, so get rid of the
global want_resched.
The cpu_need_resched macro now takes two arguments.
We need to declare proc_trampoline() from for the new m68k vm_machdep.c.
The fields l_back and l_forw no longer exists in struct lwp, so excise
their definition from genassym.cf.
Remove the use of the apparently now obsolete m68k/proc_subr.s.
from proc_trampoline to match the other ports).
A DIAGNOSTIC kernel will now boot and run. LOCKDEBUG still doesn't work yet.
Also, my amiga no longer loses time.
an SR value or an IPL_* constant).
- Take advange of the smaller ipl_cookie_t to shrink kmutex_t from
16 bytes to 8 bytes by overlapping storage where possible.
- Implement a RAS-based _lock_cas() for mc68010 systems (Sun2). See
sun68k/sun68k/isr.c.
Tested on various m68k platforms, but NOT Sun2. In any case, at least
Sun2 compiles now.
to avoid exporting unnecessary files to userland.
Should fix build.sh failure, which was pointed out by isaki@.
XXX: which userland program would require contents of <machine/intr.h>?
- finish implementing splraiseipl (and makeiplcookie).
http://mail-index.NetBSD.org/tech-kern/2006/07/01/0000.html
- complete workqueue(9) and fix its ipl problem, which is reported
to cause audio skipping.
- fix netbt (at least compilation problems) for some ports.
- fix PR/33218.
version.
Add disk_blocksize(9) so that disk drivers can record the physical
block size of a disk if it is different to DEV_BSIZE. Right now this
simply initialises dk_blkshift and dk_byteshift according to the
supplied block size. This information is used in the MI version of
bounds_check_with_label().
dumpdev. this occurs when we try to set the dumpdev to a device
with no driver loaded. this fixes PR#34872.
in sys_swapctl, if bdevsw_lookup() fails, set dumpdev = NODEV
before calling cpu_dumpconf(). (this also fixes PR#34872.)
XXX: cpu_dumpconf() should probably be changed to take a dumpdev
XXX: and return an error in such cases, but that is a much more
XXX: intrusive change.
XXX2: this is only run-tested on sparc64 and compile tested on a
XXX2: couple of platforms.
to the screen on which they are being called. The driver cannot guess
this by itself but it is needed to implement, at least, the getwschar and
putwschar functions in the correct place. There are no functional changes
yet.
Tested on i386 (vga, vga_raster, machfb, vesafb), macppc and sparc64.
Suggested and reviewed by macallan@.
