8a9880e714
Fix oversight in previous.
1995-08-12 21:36:46 +00:00
80d7b0695a
minphys() functions really should return void.
1995-08-12 20:30:45 +00:00
52e968da1a
Fix oversight in last.
1995-08-12 18:48:47 +00:00
d9678d59b2
Fix up DVMA-related confusion. Disk boot now works.
1995-08-12 18:38:30 +00:00
1fd03600dd
Get rid of cpu040 for good.
1995-08-12 04:08:29 +00:00
24644e5151
New version of NCR5380-SCSI driver. This version is far more generic than
...
the previous version. The machine dependent part contains the configuration
for both the TT and FALCON. The configuration files have been changed to
select SCSI-support for either TT, Falcon or both.
The configuration file for the Atari-Falcon will only get _really_ usefull
when the Falcon video part is finished.
1995-08-11 20:01:15 +00:00
8f58d57321
Don't fake these values.
1995-08-11 17:48:19 +00:00
72d557cf87
The serial console works again (at least on the Q700).
1995-08-11 03:29:07 +00:00
d192d70a87
Note that we've been initialized.
1995-08-11 03:02:04 +00:00
100380f075
Do the serial console a bit better (still has problems).
1995-08-11 03:00:15 +00:00
6a43b6e3a1
Re-port the Alpha versino of NetBSD's machine-independent LANCE driver
...
back to the DECstation. Boots on 3MAX and 3MAXPLUS. The bug-fixes
applied to this driver since it forked off the Decstation code also
seem to fix long-standing DMA problems with the Decstation SCSI driver.
1995-08-11 02:12:56 +00:00
0744a4dc6a
sync with hp300 version (cpu_coredump changes)
1995-08-10 19:46:45 +00:00
b256a1bf82
sync with hp300 version
1995-08-10 19:44:01 +00:00
939f7eb7d0
add bounds_check_with_label(), and thus sync with hp300 version.
1995-08-10 19:36:41 +00:00
f54a288467
minor alphabetize clean up
1995-08-10 19:18:02 +00:00
d65beaf096
add bcea[] (as per sun3 port)
1995-08-10 16:21:54 +00:00
37e46e6b64
clockattach() wasn't printing a newline; add it.
1995-08-10 10:50:58 +00:00
69f95bd2bb
Use "lance" as the name of the PMAX (kn01) Lance device, not "le", since
...
"lance" is what the Alpha drivers use.
1995-08-10 10:49:46 +00:00
0822ab0fe1
Map from NetBSD/Alpha names for machine-dependent functions (e.g.,
...
"force this pending write to complete") to the names used in NetBSD/pmax.
1995-08-10 05:29:11 +00:00
b42e35d645
Un-comment dependency on file cpu.c, since cpu.c has been commited to CVS.
1995-08-10 05:22:26 +00:00
0b4c870908
Change DEcstation autoconfiguration to use new-style config.
...
All devices except SCSI disks and tapes are found using new config only.
SCSI disks and tapes are configured using a table edited from an ioconf.c
produced by config.old.
Boots multi-user on PMAX, 3MAX and 3MAXPLUS. The old-style "slot hand fill"
functions for those machines, and the old TurboChannel configuration
main loop, have been removed.
Since new-style config runs later in boot than the old pmax turbochannel
probing, we no longer know what devices will be configured when consinit()
is called. Use PROM output until autoconfig is finished.
1995-08-10 05:17:07 +00:00
bc6e09fad6
Remove extraneous debugging printf()s when running on processors
...
this code has been tested on.
1995-08-10 04:31:46 +00:00
a1a7750426
Move IO ASIC interrupt-enable outside #ifdef DEBUG, where it had
...
accidentally snuck in. Clean up debugging messages and explicitly
give a warning on CPUs the code hasn't been tested on.
1995-08-10 04:30:41 +00:00
e3b5a34826
Update DECstation Lance ethernet driver to use new-style config.
1995-08-10 04:27:43 +00:00
88b9b7eb4a
Update DECstation drivers to use new-style config, removing
...
old-style config support, except for SCSI disks and tapes.
1995-08-10 04:21:35 +00:00
6f7dc7fd4e
Make this compile if one of SYSV{SEM,SHM,MSG} is not defined.
1995-08-10 04:08:57 +00:00
81cc5998a1
Missing increment operator for if_opackets in last change.
1995-08-09 12:16:10 +00:00
b4eecb5362
We need to set cpu040 for just a while longer.
1995-08-09 03:25:25 +00:00
53af1e73b8
Make sure we don't remap video/serial before we're done writing to it.
1995-08-09 03:23:57 +00:00
71b21ba74e
Don't go bonkers if we don't have a real swap device.
1995-08-09 03:22:50 +00:00
dbdcebe34b
Fix a few 040-isms, remove an old comment, and add a few things for the future.
1995-08-09 03:21:59 +00:00
3ee59cd771
Fix oversight in previous change; spl*() must also block
...
software interrupts.
1995-08-09 01:47:37 +00:00
96f7ad7c6e
Add missing "priority" field value in KN02 "asic" configuration entry for
...
the Dallas-compatible real-time clock. The missing entry caused the offset
to end up in the "priority" field. New-style config now boots cleanly on a
KN02 (3MAX).
1995-08-09 01:21:43 +00:00
67ad80c6ed
Not really useful anymore.
1995-08-08 22:28:32 +00:00
75dc312695
Do errno translation when emulation needs it.
1995-08-08 21:11:47 +00:00
ee8dd73508
Make this link with PMAP_DEBUG turned off.
1995-08-08 21:10:18 +00:00
73d4eba4cf
Only allow mmap in "managed" RAM for now.
1995-08-08 21:09:01 +00:00
fafc2a527a
Fix signed/unsigned comparison in dumpconf().
1995-08-08 21:07:52 +00:00
106e4e8c4a
Fix "oops" line that was supposed to increment tv_usec
...
(just to make sure time keeps moving 8^)
1995-08-08 21:05:48 +00:00
dac3687c31
Make it work with obj dirs. (from Jason Thorpe)
1995-08-08 21:02:04 +00:00
7eda63e726
Get rid of libnet
1995-08-08 21:00:00 +00:00
b090a64678
Add bcea[] here now that is is gone from arp.c
1995-08-08 20:59:07 +00:00
59078e8a4b
Cosmetic (fix order)
1995-08-08 20:57:51 +00:00
239821855f
Add default value for SHMMAXPGS (from Jason Thorpe - fixes PR#1220)
1995-08-08 20:56:45 +00:00
c96c328a9d
Use old-style function definitions (like the sparc driver).
1995-08-08 20:54:08 +00:00
2a3eef935e
Improve handling of a device that "sits on" the bus (from Jason Thorpe)
1995-08-08 20:53:16 +00:00
9ede017ccb
Set TIMEZONE=0, DST=0 (which is correct for the hardware clock).
1995-08-08 20:51:26 +00:00
19969f2fe2
Use RPCAUTH_UNIX in requests to please picky NFS servers.
1995-08-08 20:43:43 +00:00
0b486f9aa0
Add bounds_check_with_label().
1995-08-08 06:23:08 +00:00
e4413d1a10
Fix another comment.
1995-08-07 14:26:51 +00:00
mycroft