8a9880e714
Fix oversight in previous.
1995-08-12 21:36:46 +00:00
80d7b0695a
minphys() functions really should return void.
1995-08-12 20:30:45 +00:00
52e968da1a
Fix oversight in last.
1995-08-12 18:48:47 +00:00
d9678d59b2
Fix up DVMA-related confusion. Disk boot now works.
1995-08-12 18:38:30 +00:00
cb188d3b35
fix typo
1995-08-12 05:02:46 +00:00
1fd03600dd
Get rid of cpu040 for good.
1995-08-12 04:08:29 +00:00
89a5fea138
Added man4.sun3 & man8.sun3
1995-08-12 01:22:31 +00:00
705e61651e
fix a couple of bugs pointed out by John Birrell, though fix some
...
differently he did. (1) don't assume that the timeval in
the packet is correctly aligned, (2) don't compare beyond the end
of the packet, (3) minor cast for printf happiness.
1995-08-11 22:37:58 +00:00
24644e5151
New version of NCR5380-SCSI driver. This version is far more generic than
...
the previous version. The machine dependent part contains the configuration
for both the TT and FALCON. The configuration files have been changed to
select SCSI-support for either TT, Falcon or both.
The configuration file for the Atari-Falcon will only get _really_ usefull
when the Falcon video part is finished.
1995-08-11 20:01:15 +00:00
8f58d57321
Don't fake these values.
1995-08-11 17:48:19 +00:00
72d557cf87
The serial console works again (at least on the Q700).
1995-08-11 03:29:07 +00:00
d192d70a87
Note that we've been initialized.
1995-08-11 03:02:04 +00:00
100380f075
Do the serial console a bit better (still has problems).
1995-08-11 03:00:15 +00:00
6a43b6e3a1
Re-port the Alpha versino of NetBSD's machine-independent LANCE driver
...
back to the DECstation. Boots on 3MAX and 3MAXPLUS. The bug-fixes
applied to this driver since it forked off the Decstation code also
seem to fix long-standing DMA problems with the Decstation SCSI driver.
1995-08-11 02:12:56 +00:00
6bd48c2b9a
Update the `BUGS' section, now that we support the more sophisticated
...
group and passwd YP prototypes.
1995-08-11 01:16:52 +00:00
110b961e86
Change a few bogus instances of ';' to the syntactically correct ','.
1995-08-11 01:10:21 +00:00
40b67f2121
lose unused variable; PR #1297
1995-08-11 00:38:15 +00:00
a6751cc939
Updated for LOG_FTP (PR #1312 ).
...
Edited the examples section so that they are all separated by a single
blank line, since they're unrelated. SunOS' syslog(3) has a sentance
or two describing each line. We'll either have to come up with our
own text or ignore it. I'm ignoring it for now.
1995-08-11 00:34:34 +00:00
71c33981ab
Fix parity calculation; PR #1325
1995-08-11 00:10:40 +00:00
ea00559d41
Convert to use err(3)
1995-08-11 00:08:18 +00:00
7320c39038
makedev(8) -> MAKEDEV(8); PR #1306
1995-08-10 23:47:32 +00:00
3619016374
Moved from section 1 to section 8; PR #1298
1995-08-10 23:29:47 +00:00
0744a4dc6a
sync with hp300 version (cpu_coredump changes)
1995-08-10 19:46:45 +00:00
b256a1bf82
sync with hp300 version
1995-08-10 19:44:01 +00:00
939f7eb7d0
add bounds_check_with_label(), and thus sync with hp300 version.
1995-08-10 19:36:41 +00:00
f54a288467
minor alphabetize clean up
1995-08-10 19:18:02 +00:00
d65beaf096
add bcea[] (as per sun3 port)
1995-08-10 16:21:54 +00:00
37e46e6b64
clockattach() wasn't printing a newline; add it.
1995-08-10 10:50:58 +00:00
69f95bd2bb
Use "lance" as the name of the PMAX (kn01) Lance device, not "le", since
...
"lance" is what the Alpha drivers use.
1995-08-10 10:49:46 +00:00
7df5d8b0ec
If set, show a route's mtu in the routing table display.
1995-08-10 06:24:52 +00:00
0822ab0fe1
Map from NetBSD/Alpha names for machine-dependent functions (e.g.,
...
"force this pending write to complete") to the names used in NetBSD/pmax.
1995-08-10 05:29:11 +00:00
b42e35d645
Un-comment dependency on file cpu.c, since cpu.c has been commited to CVS.
1995-08-10 05:22:26 +00:00
0b4c870908
Change DEcstation autoconfiguration to use new-style config.
...
All devices except SCSI disks and tapes are found using new config only.
SCSI disks and tapes are configured using a table edited from an ioconf.c
produced by config.old.
Boots multi-user on PMAX, 3MAX and 3MAXPLUS. The old-style "slot hand fill"
functions for those machines, and the old TurboChannel configuration
main loop, have been removed.
Since new-style config runs later in boot than the old pmax turbochannel
probing, we no longer know what devices will be configured when consinit()
is called. Use PROM output until autoconfig is finished.
1995-08-10 05:17:07 +00:00
bc6e09fad6
Remove extraneous debugging printf()s when running on processors
...
this code has been tested on.
1995-08-10 04:31:46 +00:00
a1a7750426
Move IO ASIC interrupt-enable outside #ifdef DEBUG, where it had
...
accidentally snuck in. Clean up debugging messages and explicitly
give a warning on CPUs the code hasn't been tested on.
1995-08-10 04:30:41 +00:00
e3b5a34826
Update DECstation Lance ethernet driver to use new-style config.
1995-08-10 04:27:43 +00:00
88b9b7eb4a
Update DECstation drivers to use new-style config, removing
...
old-style config support, except for SCSI disks and tapes.
1995-08-10 04:21:35 +00:00
558fb11b35
Accept numeric uid or gid for -o and -g flags, for consistency with
...
chown and chgrp.
1995-08-10 04:20:57 +00:00
6f7dc7fd4e
Make this compile if one of SYSV{SEM,SHM,MSG} is not defined.
1995-08-10 04:08:57 +00:00
81cc5998a1
Missing increment operator for if_opackets in last change.
1995-08-09 12:16:10 +00:00
b4eecb5362
We need to set cpu040 for just a while longer.
1995-08-09 03:25:25 +00:00
53af1e73b8
Make sure we don't remap video/serial before we're done writing to it.
1995-08-09 03:23:57 +00:00
71b21ba74e
Don't go bonkers if we don't have a real swap device.
1995-08-09 03:22:50 +00:00
dbdcebe34b
Fix a few 040-isms, remove an old comment, and add a few things for the future.
1995-08-09 03:21:59 +00:00
3ee59cd771
Fix oversight in previous change; spl*() must also block
...
software interrupts.
1995-08-09 01:47:37 +00:00
96f7ad7c6e
Add missing "priority" field value in KN02 "asic" configuration entry for
...
the Dallas-compatible real-time clock. The missing entry caused the offset
to end up in the "priority" field. New-style config now boots cleanly on a
KN02 (3MAX).
1995-08-09 01:21:43 +00:00
67ad80c6ed
Not really useful anymore.
1995-08-08 22:28:32 +00:00
690bed406e
Missed the error pointed out in PR#804 (Oops! 8^)
1995-08-08 21:37:40 +00:00
5fb3d760b1
No more zupdate
1995-08-08 21:16:10 +00:00
5ca7ef7788
Added declarations for hsearch(), hdestroy(), and hcreate().
1995-08-08 21:14:45 +00:00
mycroft