Add vendor ID for ESS Technology Inc.
Add product ID for ESS Technology ES1938 SOLO-1 AudioDrive
Add product ID for Fujitsu K56flex LTMODEM
Add product ID for TI PCI1250 PC Card bridge
Add product ID for Trident Cyber 9397 Video controller.
descriptor count gets miscounted on txprobes. The second (and more
important) is that transmit stalls should now be fixed. The problem
was not due to lack of ring resources but dmamaps. When Jason changed
the driver to use pre-allocated maps (instead of the dynamic ones I
used), and when there were no more maps, the driver just gave up instead
of calling tx_intr to free any transmitted but unreclaimed dma maps.
Since there was nothing being transmitted, no transmit interrupts
would fire to restore things (and OACTIVE prevented other transmits
from happenning). So it stayed starved until another interrupt cause
(like a received packet) "woke" it up.
-use of uninitialized variable in attach (mostly harmless)
-removal of dead code in attach()
-fix of interpretation of SIA blocks on >=21142 (serious, caused strange
things with 10Mbit)
egcs won't attempt to optimize inline copies of them into a single
load/store (the RFA is not 4-byte aligned in the DMA area).
Just use memcpy() to copy those fields, now, not our own home-grown.
cursor code. These are unneeded on the Bt485, since the RAMDAC handles
the hardware cursor. They are needed for the Bt463, however, since the
RAMDAC only provides cursor color.
* Improve the midisyn layer a little.
* Add a driver for the Yamaha OPL[23] FM synths.
The opl driver is not finished yet; it sounds pretty awful.
For some strange reason I cannot get any FM sound from my SB64 cards,
but a regular SB16 works fine.
if i drive is responding):
-if the reset succeeds, check some registers to make sure there is really
a drive (and not a chipset which echoes back the last written value)
-explicitely select the master before trying to read the master's status
the 3Com 3c905-TX and 3c905-T4. Fix handling of the MII on the
3c595-MII and 3c597-MII (can't talk to the PHYs on these cards; just
use "manual" for the external MII port).
Fixes kern/4782 (Chris Demetriou).
if_tlvar.h, since the ThunderLAN PHY driver needs to know some things
about it's parent (and since it can only attach to a ThunderLAN chip,
this is the easiest way).
associated with any observed lossage...it was just noticed while reading
ncr_start().
g/c some now-unreachable code produced by the earlier race condition fix.
* Use the new trigger_{in,out}put interface.
* Allow the play and record channels to have different encodings (but the
same sample rate).
* Play u-law and a-law as 16-bit data. (This may not work yet...)
>We're not Linux. If we still want driver version strings to be displayed
>at boot, then I suppose DEBUG is a reasonable compromise.
Makes the whole concept useless. This is for default printouts. If you
can build a debug kernel, you know what version you have. This was under
the concept of 'RAS' so that hapless users could tell you microversion
things. But I guess this isn't the right way according to our local
Jesuits. Oh, well. I'll think up something different and hopefully
less objectionable. And yes, NetBSD isn't linux. The developers seem
to be equally bad tempered, but linux is more successful.
Part B:
Field interrupts in OS layer so that (in this OS) bus_dmamap_sync(POSTREAD)
can (formally) ensure that the result queue is stable wrt to buffering
and that for sending a command a bus_dmamap_sync(PREWRITE) is done to
ensure that the device gets a good view of what the mailbox contents
should be.
which contain 'standard' com- and lpt-type ports. Some of these present
as PCI simple-communications/serial or simple-communications/parallel
devices, but many do not. (Additionally, there is no document that I can
find that describes the "specific well-konwn register-level" description
of how the 'standard' devices' config space headers shold work.) Eventually,
some of the devices driven by this code should become simple pci attachments
for the 'lpt' and 'com' drivers, but that requires solid documentation.
the BAR-printing function to print a name for the register, factor out
a common register-bits function which can handle the fact that type 2
headers have a different size than is usual, and actually do something
useful with the rest of the bits in the type 2 header.
drochner