lukem
87d530f065
cleanup_dist():
...
- filenames in obsolete sets start with "./" not "/" (i changed that a
while ago, and forgot to update this)
- only call target_prefix() once, not for each filename parsed...
- look for obsolete lists in /etc/obsolete/%s instead of /dist/%s_obsolete
2003-02-20 12:02:56 +00:00
martin
c3ed92df3e
Add a few new devices.
2003-02-20 12:02:31 +00:00
lukem
5c198ab018
etc/postinstall
...
* Improve message display in find_file_in_dirlist()
* do_obsolete(): instead of running distrib/sets/makeobsolete to
temporarily generate the obsolete sets lists, look for them in
${SRC_DIR}/etc/obsolete/* or ${DEST_DIR}/etc/obsolete/*.
The obsolete check now works for "extracted etc.tgz" as the source dir.
etc/Makefile (install-etc-files), distrib/sets/lists/*
* Install obsolete set lists into /etc/obsolete/
* Tweak how pwd_mkdb files are added to METALOG
distrib/sets/makeobsolete
* Don't bother with "_obsolete" suffix on generated file names.
2003-02-20 11:40:28 +00:00
grant
d1d5ade4cf
remove -O arg in pax->tar change.
...
also noted by MOCHIZUKI Tomomitsu.
2003-02-20 11:03:34 +00:00
grant
5bb479a60f
add missing '-' (stdin) to progress/tar command line.
...
noted by MOCHIZUKI Tomomitsu in PR install/20442.
2003-02-20 11:00:35 +00:00
wiz
658b9c6d28
In ssl3_get_record (ssl/s3_pkt.c), minimize information leaked
...
via timing by performing a MAC computation even if incorrect
block cipher padding has been found. This is a countermeasure
against active attacks where the attacker has to distinguish
between bad padding and a MAC verification error. (CAN-2003-0078)
2003-02-20 07:39:17 +00:00
perseant
fdf4bfe002
Tabify, and fix some comment alignment problems.
2003-02-20 04:27:23 +00:00
jmc
ff58e08182
Move simple_lock after the hashinit's to avoid possible sleeping/malloc'ing
...
with a simplelock held.
2003-02-20 02:49:51 +00:00
matt
4630a8e7f3
Add a MIIF_FORCEANEG flag to be passed to mii_attach. This forces an
...
autonegotiation to take place if IFM_AUTO is selected in mii_media_set.
Make the gem driver use it. (XXX hme probably should use it but I can't
test that).
2003-02-20 00:55:21 +00:00
matt
b42cde14b7
Set KERN_AS=obj now that LKMs work. (otherwise when you loaded LKMs they
...
wouldn't have all the library routines available).
2003-02-19 23:55:48 +00:00
matt
0f3ffeff6a
gidlist is nolonger an array.
2003-02-19 23:12:20 +00:00
pk
9ead24ac7a
Use lock_printf() in SPINLOCK_SPINCHECK() and SLOCK_TRACE().
2003-02-19 22:34:42 +00:00
pk
b66bce23df
Finish PV table locking. Terminology and locking strategy stolen from
...
the alpha port.
2003-02-19 22:27:08 +00:00
martin
d47d521c0f
Since size_t is unsigned, better use (unsigned long) and %lu to print
...
a size_t. Spotted by kleink.
2003-02-19 19:15:28 +00:00
matt
f7418ccd14
Add helper awk scripts for generating trampolines for PowerPC LKMs.
2003-02-19 19:04:27 +00:00
matt
f65e1190f5
When making a LKM for powerpc, add function trampolines to undefined
...
functions. This makes LKMs functional for powerpc.
2003-02-19 19:03:41 +00:00
dsl
3dfa0d0485
Stop ftpd changing inetd's 'logname'
...
Stop buffer overrun if {NGROUPS_MAX} is greater than the compile time
NGROUPS_MAX.
(approved by christos)
2003-02-19 18:26:48 +00:00
martin
93f473507c
Replace some int's with size_t. Use %ld and cast to long when printing
...
size_t's.
2003-02-19 16:53:26 +00:00
martin
cfa07275ad
Follow changes in rev. 1.79 of sys/kern/exec_conf.c
...
(if emulation uses elf32_copyargs(), it shouldn't use it's own idea
of how many AUX arguments are actually passed)
2003-02-19 15:43:56 +00:00
hannken
8f45c81f55
Add PQUIRK_NO_FLEX_PAGE for Fujitsu MO MCJ3230AP.
...
This drive returns bogus geometry (0 heads, 0 sectors).
2003-02-19 14:33:15 +00:00
he
3d65d2c867
The ports which use grep in their miniroot need to have a special
...
rule to get at the source (and object) directory after the recent
grep move.
2003-02-19 14:21:06 +00:00
jdolecek
5c10202b37
do previous differently - pass ap->a_id down to smbfs_smb_lock()
...
and smbfs_smb_lockandx() as caddr_t, and mask it to 16bit value
in smbfs_smb_lockandx()
okayed by Martin
2003-02-19 13:51:24 +00:00
yamt
5f444770aa
add debug code to lfs_free.
2003-02-19 12:58:53 +00:00
simonb
81dc935e33
Show the last "track" as the start of the lead-out area instead of a
...
bogus track number. Remove a magic number and (slightly) simplify the
TOC entry display function a little.
2003-02-19 12:55:58 +00:00
yamt
65fda8e404
workaround for "another flush is..." infinity loop in writerd.
...
if we're writerd, sleep in lfs_flush until another writer goes away
instead of busy loop in writed.
2003-02-19 12:49:10 +00:00
martin
681bcd85a7
SMB lock ids apparently are 16bit items. And the code uses id 1 always.
...
No need to cast it back and forth to a caddr_t and u_int32_t - which does
not work well on 64bit archs.
2003-02-19 12:44:47 +00:00
yamt
d9a4f81d1c
wire the pages instead of just dequeue'ing them.
...
advised by Chuck Silvers.
2003-02-19 12:22:51 +00:00
yamt
18e00c1196
init b_interlock.
2003-02-19 12:18:59 +00:00
yamt
2be86f2ff8
acquire v_interlock before calling VOP_PUTPAGES.
2003-02-19 12:02:38 +00:00
martin
6b7ecffb54
Change a few int -> size_t to make it compile on archs where they are not
...
the same.
2003-02-19 12:01:37 +00:00
yamt
0ad89cf93e
init b_interlock.
2003-02-19 12:01:17 +00:00
scw
beccdcb402
Make this at least compile on BE platforms.
...
XXX: Needs testing by someone with a suitable SMB server.
2003-02-19 11:58:58 +00:00
yamt
148af81ca0
initialize a simple_lock in softc.
2003-02-19 11:32:13 +00:00
jdolecek
25d6f89a59
update emul alarm syscalls to recent timer changes
...
problem encountered by Luke Mewburn for linux emul, problem spot
found by Enami Tsugutomo
2003-02-19 11:23:53 +00:00
drochner
f7320016a9
add copyright notice
2003-02-19 10:48:00 +00:00
jdolecek
853290d652
remove local idea of ELF_AUX_ARGSIZ - since this emul uses elf32_copyargs(),
...
it shouldn't override the size
2003-02-19 09:45:48 +00:00
jdolecek
382f8f9883
if emulation uses elf32_copyargs(), it shouldn't use it's own idea
...
of how many AUX arguments are actually passed
this fixes PR kern/20423 by Shingo WATANABE
2003-02-19 09:44:42 +00:00
dsl
c17244d768
Create session before setting logname - we don't want to change the
...
parents logname (or any other children pre-empted in that window).
2003-02-19 09:21:15 +00:00
jdolecek
1cacc8d1a4
always include support for password encryption
...
const-poison smb_crypt.c some
2003-02-19 08:33:08 +00:00
jdolecek
09caa6e970
no opt_smb.h
2003-02-19 08:13:46 +00:00
elric
bbf4f2d867
Sync this file up with its counterpart in libc,
...
src/lib/libc/gen/getgrent.c
Patch and PR provided by: FUKAUMI Naoki
Addresses PR lib/20365
2003-02-19 08:04:29 +00:00
simonb
b7f4f30f48
Revert previous (in line with <i386/mtrr.h> reversion).
2003-02-19 05:38:58 +00:00
gson
d3fce65758
Reserve the I/O ports used by the CRT controller to keep them from
...
being allocated for other purposes such as PCMCIA I/O space. Fixes
port-i386/5177.
2003-02-19 04:07:56 +00:00
mrg
6f05c73b55
fix a couple of sparc sysinst bugs:
...
- md_set_no_x() was turning off the "misc" and "text" sets and
not turning off the "xcomp" and "xmisc" sets.
- now that a kernel is installed as "/netbsd" by default, do not
try to symlink (!) from /netbsd-GENERIC (which does not exist)
to /netbsd.
also:
- instead of printing the 3 kernel sets all as "Kernel : ",
now use "Kernel : ", "Kernel(SCSI3): " and "Kernel(SUN4U): "
- add a note to md.c and the menus.md.* files to keep these lists
in sync (so that the first problem above does not occur again.)
missing:
- a way to force that one and only one of the 3 kernel sets are
selected. at least the default install works now.
2003-02-19 02:09:46 +00:00
augustss
fe29dd94be
Bail out early in isoc_done if the ii is not on the interrupt list.
2003-02-19 01:35:04 +00:00
fvdl
feaeb437d4
Make COMPAT_NETBSD32 compile and work again (though not with SAs).
2003-02-19 00:37:33 +00:00
bjh21
97bd403086
Add a copyright notice for me, too.
2003-02-19 00:36:24 +00:00
fvdl
807c14b1f2
Undo constification of mtrr_funcs. I'll deal with it later.
2003-02-19 00:18:34 +00:00
fvdl
f2ef2f16fa
Revert previous. This file is also used on x86_64, you see.
2003-02-19 00:15:19 +00:00
lukem
bfc98ff079
Display the build.sh command line and the start & end times.
...
Based on suggestion from Andrew Brown <atatat@netbsd.org>.
2003-02-18 23:59:06 +00:00