Push -Wno-array-bounds down to the cases that depend on it.
Selectively disable warnings for 3rd party software or non-trivial
issues to be reviewed later to get clang -Werror to build most of the
tree.
anywhere afaics
(The confusion comes probably from use of arc4random() at various places,
but this lives in libkern and doesn't share code with the former.)
-g/c non-implementation of arc4 encryption in swcrypto(4)
-remove special casing of ARC4 in crypto(4) -- the point is that it
doesn't use an IV, and this fact is made explicit by the new "ivsize"
property of xforms
rename "UVMHIST" option to enable the uvm histories.
TODO:
- make UVMHIST properly depend upon KERNHIST
- enable dynamic registration of histories. this is mostly just
allocating something in a bitmap, and is only for viewing multiple
histories in a merged form.
tested on amd64 and sparc64.
will have an easier time replacing it with something different, even if
it is a second radix-trie implementation.
sys/net/route.c and sys/net/rtsock.c no longer operate directly on
radix_nodes or radix_node_heads.
Hopefully this will reduce the temptation to implement multipath or
source-based routing using grotty hacks to the grotty old radix-trie
code, too. :-)
and specify that usb_dma attribute to dev/usb/usb_mem.c.
usb_mem.c uses bus_dma(9) for DMA memory allocation,
but non-DMA capable USB host controllers like slhci(4)
doesn't need them at all, and some ports don't bother to
prepare MD bus_dma(9) implementation (yet).
Discussed on current-users
http://mail-index.NetBSD.org/current-users/2011/03/13/msg015995.html
and usb_dma attribute is suggested by bouyer@.
Tested by kiyohara@ on mmeye with slhci at pcmcia.
to store disk quota usage and limits, integrated with ffs
metadata. Usage is checked by fsck_ffs (no more quotacheck)
and is covered by the WAPBL journal. Enabled with kernel
option QUOTA2 (added where QUOTA was enabled in kernel config files),
turned on with tunefs(8) on a per-filesystem
basis. mount_mfs(8) can also turn quotas on.
See http://mail-index.netbsd.org/tech-kern/2011/02/19/msg010025.html
for details.
of Szeged, Hungary.
The commit includes:
- Flash layer, which gives a common API to access flash devices
- NAND controller subsystem for the flash layer
- An example OMAP driver which is used on BeagleBoard or alike ARM boards
per CPU context tied with an LWP. Main use - lazy FPU handling on SMP.
Requested by matt@, will be used on mips64. Note: implementation will
be improved to use IPIs before adopting on x86. OK ad@.
disabled by -D) from the output of newvers_stand.sh. Change -D to the
inverted logic, so that it adds the date to bootprog_rev in ().
Change all platforms accordingly. -D is added if MKREPRO is not yes and
wasn't present before. Platforms that didn't use -D don't depend on
MKREPRO now either.
hpcmips defines one in MD majors, but it's not listed in
etc/etc.hpcmips/MAKEDEV.conf, so I assume actual files are never
created in users' filesystems.
Prompted By: pooka
- Designed to be fully MP-safe and highly efficient.
- Tables/IP sets (hash or red-black tree) for high performance lookups.
- Stateful filtering and Network Address Port Translation (NAPT).
Framework for application level gateways (ALGs).
- Packet inspection engine called n-code processor - inspired by BPF -
supporting generic RISC-like and specific CISC-like instructions for
common patterns (e.g. IPv4 address matching). See npf_ncode(9) manual.
- Convenient userland utility npfctl(8) with npf.conf(8).
NOTE: This is not yet a fully capable alternative to PF or IPFilter.
Further work (support for binat/rdr, return-rst/return-icmp, common ALGs,
state saving/restoring, logging, etc) is in progress.
Thanks a lot to Matt Thomas for various useful comments and code review.
Aye by: board@
kernconfig_mutex. Update module subsystem to use this mutex rather than
its own internal (non-recursive) mutex. Make module_autoload() do its
own locking to be consistent with the rest of the module_xxx() calls.
Update module(9) man page appropriately.
As discussed on tech-kern over the last few weeks.
Welcome to NetBSD 5.99.39 !
at boot.
Add a ksyms_mod_foreach() function to iterate a callback function over the
set of elf symbols for a specific module (netbsd included).
Add kern_ctf.c and mod_ctf_get() to allow the retrieval and decompression
of CTF sections for a specific module.
especially on RTL8019AS which is also used for non-ISA local bus of
embedded controllers and some m68k machines like atari and x68k.
* move RTL8019 probe and attach code from each bus attachment
to MI ne2000_detect() and ne2000_attach()
* change a method for backend and attachment to specify 8 bit mode
to use a new sc->sc_quirk member, instead of sc->sc_dmawidth
* handle more NE2000 8 bit mode specific settings, including
bus_space(9) access width and available size of buffer memory
* add a function to detect NE2000 8 bit mode
(disabled by default, but enalbed by options NE2000_DETECT_8BIT
to avoid possible regression on various ISA clones)
* fix ipkdb attachment accordingly (untested)
Tested on two NE2000 ISA variants (RTL8019AS and another clone named UL0001)
in both 8 bit and 16 bit mode on i386. "Looks good" from nonaka@.
See my post on tech-kern for details:
http://mail-index.NetBSD.org/tech-kern/2010/02/26/msg007423.html
on the amount of physical memory and limited by NMBCLUSTERS if present.
Architectures without direct mapping also limit it based on the kmem_map
size, which is used as backing store. On i386 and ARM, the maximum KVA
used for mbuf clusters is limited to 64MB by default.
The old default limits and limits based on GATEWAY have been removed.
key_registered_sb_max is hard-wired to a value derived from 2048
clusters.
into subr_device.c instead of having them in subr_autoconf.c.
Since none of the copyrights in subr_autoconf.c really match the
history of device accessors, I took the liberty of slapping (c)
2006 TNF onto subr_device.c.
#if NBPFILTER is no longer required in the client. This change
doesn't yet add support for loading bpf as a module, since drivers
can register before bpf is attached. However, callers of bpf can
now be modularized.
Dynamically loadable bpf could probably be done fairly easily with
coordination from the stub driver and the real driver by registering
attachments in the stub before the real driver is loaded and doing
a handoff. ... and I'm not going to ponder the depths of unload
here.
Tested with i386/MONOLITHIC, modified MONOLITHIC without bpf and rump.
for the patches!
I've lightly tested the basics: create cgd0 on vnd0d, initialize with
zeros, newfs /dev/cgd0a, mount, copy files on, unmount, drvctl -d
cgd0. Works fine. I also shutdown with a cgd0 configured: detached as
expected.
support, i.e. move vfs functionality to a separate module
(kern_module_vfs.c)
* make module proplist size an MI constant (now 8k) instead of PAGE_SIZE
* change some error values to something else than the karmic EINVAL
- Addresses the issue described in PR/38828.
- Some simplification in threading and sleepq subsystems.
- Eliminates pmap_collect() and, as a side note, allows pmap optimisations.
- Eliminates XS_CTL_DATA_ONSTACK in scsipi code.
- Avoids few scans on LWP list and thus potentially long holds of proc_lock.
- Cuts ~1.5k lines of code. Reduces amd64 kernel size by ~4k.
- Removes __SWAP_BROKEN cases.
Tested on x86, mips, acorn32 (thanks <mpumford>) and partly tested on
acorn26 (thanks to <bjh21>).
Discussed on <tech-kern>, reviewed by <ad>.
It will replace azalia(4) after testing.
To use, comment out azalia in your kernel configuration and uncomment the
hdaudio and hdafg lines so it reads:
# Intel High Definition Audio
hdaudio* at pci? dev ? function ?
hdafg* at hdaudiobus?
You should also:
cd /dev
sh MAKEDEV audio
driver, gpiolock(4), is provided as an example how to interface real hardware.
A new securemodel, securemodel_keylock, is provided to show how this can
be used to tie keylocks to overall system security. This is experimental
code. The diff has been on tech-kern for several weeks.
Reviewed by many, kauth(9) integration reviewed by Elad Efrat; approved by
tonnerre@ and tron@. Thanks to everyone who provided feedback.
tested with a DEBUG+DIAGNOSTIC+LOCKDEBUG kernel. To summerise NiLFS, i'll
repeat my posting to tech-kern here:
NiLFS stands for New implementation of Logging File System; LFS done
right they claim :) It is at version 2 now and is being developed by NTT, the
Japanese telecom company and recently put into the linux source tree. See
http://www.nilfs.org. The on-disc format is not completely frozen and i expect
at least one minor revision to come in time.
The benefits of NiLFS are build-in fine-grained checkpointing, persistent
snapshots, multiple mounts and very large file and media support. Every
checkpoint can be transformed into a snapshot and v.v. It is said to perform
very well on flash media since it is not overwriting pieces apart from a
incidental update of the superblock, but that might change. It is accompanied
by a cleaner to clean up the segments and recover lost space.
My work is not a port of the linux code; its a new implementation. Porting the
code would be more work since its very linux oriented and never written to be
ported outside linux. The goal is to be fully interchangable. The code is non
intrusive to other parts of the kernel. It is also very light-weight.
The current state of the code is read-only access to both clean and dirty
NiLFS partitions. On mounting a dirty partition it rolls forward the log to
the last checkpoint. Full read-write support is however planned!
Just as the linux code, mount_nilfs allows for the `head' to be mounted
read/write and allows multiple read-only snapshots/checkpoint mounts next to
it.
By allowing the RW mount at a different snapshot for read-write it should be
possible eventually to revert back to a previous state; i.e. try to upgrade a
system and being able to revert to the exact state prior to the upgrade.
Compared to other FS's its pretty light-weight, suitable for embedded use and
on flash media. The read-only code is currently 17kb object code on
NetBSD/i386. I doubt the read-write code will surpass the 50 or 60. Compared
this to FFS being 156kb, UDF being 84 kb and NFS being 130kb. Run-time memory
usage is most likely not very different from other uses though maybe a bit
higher than FFS.
PR kern/16942 panic with softdep and quotas
PR kern/19565 panic: softdep_write_inodeblock: indirect pointer #1 mismatch
PR kern/26274 softdep panic: allocdirect_merge: ...
PR kern/26374 Long delay before non-root users can write to softdep partitions
PR kern/28621 1.6.x "vp != NULL" panic in ffs_softdep.c:4653 while unmounting a softdep (+quota) filesystem
PR kern/29513 FFS+Softdep panic with unfsck-able file-corruption
PR kern/31544 The ffs softdep code appears to fail to write dirty bits to disk
PR kern/31981 stopping scsi disk can cause panic (softdep)
PR kern/32116 kernel panic in softdep (assertion failure)
PR kern/32532 softdep_trackbufs deadlock
PR kern/37191 softdep: locking against myself
PR kern/40474 Kernel panic after remounting raid root with softdep
Retire softdep, pass 2. As discussed and later formally announced on the
mailing lists.
option MODULAR to using %MODULAR%. While it is now possible to only
request the new version in the affected Makefiles, it is made mandatory for
everybody because I just fixed a bug in config(1) that would not make it
fail in the case of a syntax error in the Makefile template.
it caused the return from the enclosing function to break, as well as the
ssp return on i386. To fix both issues, split configure in two pieces
the one before calling ssp_init and the one after, and move the ssp_init()
call back in main. Put ssp_init() in its own file, and compile this new file
with -fno-stack-protector. Tested on amd64.
XXX: If we want to have ssp kernels working on 5.0, this change needs to
be pulled up.
- renamed to MEMORY_DISK_RBFLAGS to better fit the rest of the
MEMORY_DISK options(4)
- change default value to RB_AUTOBOOT instead of RB_SINGLE, and adapt
the config(5) files accordingly
- document this option inside options(4)
See also http://mail-index.netbsd.org/tech-kern/2008/12/25/msg003924.html
Reviewed by abs@ in private mail.
magic libc symbol. This also allows to bid farewell to subr_prf2.c
and merge the contents back to subr_prf.c. The host kernel bridging
is now done via rumpuser_putchar().
the base NetBSD system. It uses Linux LVM2 tools and our BSD licensed
device-mapper driver.
The device-mapper driver can be used to create virtual block devices which
maps virtual blocks to real with target mapping called target. Currently
these targets are available a linear, zero, error and a snapshot (this is
work in progress and doesn't work yet).
The lvm2tools adds lvm and dmsetup binary to based system, where the lvm
tool is used to manage and administer whole LVM and the dmestup is used to
communicate iwith device-mapper kernel driver. With these tools also
a libdevmapper library is instaled to the base system.
Building of tools and driver is currently disable and can be enabled with
MKLVM=yes in mk.conf. I will add sets lists and rc.d script soon.
Oked by agc@ and cube@.
into modules. By and large this commit:
- shuffles header files and ifdefs
- splits code out where necessary to be modular
- adds module glue for each of the components
- adds/replaces hooks for things that can be installed at runtime
own file, subr_exec_fd.c (they're used only by exec).
After this change, the kernel source modules are in a partitioned
enough state to allow building a system without vfs at all.
