each vm_page structure. Add a VM_MDPAGE_INIT() macro to init this
data when pages are initialized by UVM. These macros are mandatory,
but ports may #define them to nothing if they are not needed/used.
This deprecates struct pmap_physseg. As a transitional measure,
allow a port to #define PMAP_PHYSSEG so that it can continue to
use it until its pmap is converted to use VM_MDPAGE_MEMBERS.
Use all this stuff to eliminate a lot of extra work in the Alpha
pmap module (it's smaller and faster now). Changes to other pmap
modules will follow.
This is a completely rewritten scsipi_xfer execution engine, and the
associated changes to HBA drivers. Overview of changes & features:
- All xfers are queued in the mid-layer, rather than doing so in an
ad-hoc fashion in individual adapter drivers.
- Adapter/channel resource management in the mid-layer, avoids even trying
to start running an xfer if the adapter/channel doesn't have the resources.
- Better communication between the mid-layer and the adapters.
- Asynchronous event notification mechanism from adapter to mid-layer and
peripherals.
- Better peripheral queue management: freeze/thaw, sorted requeueing during
recovery, etc.
- Clean separation of peripherals, adapters, and adapter channels (no more
scsipi_link).
- Kernel thread for each scsipi_channel makes error recovery much easier
(no more dealing with interrupt context when recovering from an error).
- Mid-layer support for tagged queueing: commands can have the tag type
set explicitly, tag IDs are allocated in the mid-layer (thus eliminating
the need to use buggy tag ID allocation schemes in many adapter drivers).
- support for QUEUE FULL and CHECK CONDITION status in mid-layer; the command
will be requeued, or a REQUEST SENSE will be sent as appropriate.
Just before the merge syssrc has been tagged with thorpej_scsipi_beforemerge
- pmap_enter()
- pmap_remove()
- pmap_protect()
- pmap_kenter_pa()
- pmap_kremove()
as described in pmap(9).
These calls are relatively conservative. It may be possible to
optimize these a little more.
call overhead is incurred as we start sprinkling pmap_update() calls
throughout the source tree (no pmaps currently defer operations, but
we are adding the infrastructure to allow them to do so).
and use appropriately
- create more helper macros:
. cdev__xyz_init(c,n), such as cdev__ocri_init() for
/* open, close, read, ioctl */, etc.
. cdev__xRy_init(c,n), where nullop is used instead of enodev to dummy out
method `R' and the comments now read /* xxx (read) yyy */ instead
. cdev__xyz_t_init(c,n,t) - as per cdev__xyz_init, but sets d_type = t
as well
- use seltrue instead of dev_noimpl(poll,*), as (IIRC) cdevsw.d_poll should
always DTRT WRT returning a valid result. (a few devices previously
incorrectly returned ENODEV)
- use dev_noimpl(stop,enodev) instead of dev_noimpl(stop,nullop) if tty
== 0, because it doesn't matter if dev_type_stop isn't implemented in that
case, and it allows the use of the cdev__xyz_init macros. certain ports
(sparc,sparc64,x68k) used the nullop method for dev_type_stop in a few
drivers, whereas everything else uses enodev
- ensure that the comments are accurate WRT the behaviour of a given entry
We default to the (newer, more sane) 22.1184 MHz value, but set it from
the iobzclock variable (in Hz), which is initialized from the IOBZCLOCK
configuration option and patchable.
XXX we should time the clock at system startup.
- add ioblix_zbus to the GENERIC configuration.
a constant PAGE_SIZE value didn't include setting the UVM pagesize, and the
attempt to add this ended up in the wrong place. Amiga should now boot
again.
and place the definition in <machine/types.h>. This can now be used
as a flag to indicate whether or not <machine/intr.h> can be included
to get the generic soft interrupt API.
This is the kernel part (userland to follow soon) of the latest (and
very probably last) release (version 0.96) of ISDN4BSD. ISDN4BSD has a
homepage at http://www.freebsd-support.de/i4b/.
It gives the user various ways to use the isdn connection: raw data (via
the i4brbch "raw b-channel" device), ppp (via the isp "isdn PPP" device),
voice/answering machine (the i4btel "telephone" device) and ip over isdn
(the ipr device, "IP over raw ISDN").
Supported are a bunch of common and older cards, more to be added soon
after some cleanup. Currently only the european E-DSS1 variant of the
ISDN D channel protocol is supported.
only signal handler array sharable between threads
move other random signal stuff from struct proc to struct sigctx
This addresses kern/10981 by Matthew Orgass.
XXX I wish m68k ports would share trap.c
* move all exec-type specific information from struct emul to execsw[] and
provide single struct emul per emulation
* elf:
- kern/exec_elf32.c:probe_funcs[] is gone, execsw[] how has one entry
per emulation and contains pointer to respective probe function
- interp is allocated via MALLOC() rather than on stack
- elf_args structure is allocated via MALLOC() rather than malloc()
* ecoff: the per-emulation hooks moved from alpha and mips specific code
to OSF1 and Ultrix compat code as appropriate, execsw[] has one entry per
emulation supporting ecoff with appropriate probe function
* the makecmds/probe functions don't set emulation, pointer to emulation is
part of appropriate execsw[] entry
* constify couple of structures
rather than assigning to the whole field, set or clear individual flags,
which implies that the B_BUSY and B_INVAL flags will remain set.
this allows us to make the assertion in brelse() that B_BUSY is set,
which is the purpose of all this.
pseudo-device pty 2 # pseudo-terminals (Sysinst needs two)
(Some installers may not be using sysinst, in which case this just reduces
the number of ptys from 16 that are not used to 2 that are not used)
For i386 conf files, no change other than comments.
based on it working already for macppc.
Also add commented out:
#options VNODE_OP_NOINLINE # Don't inline vnode op calls
#options NFS_V2_ONLY # Exclude NFS3 and NQNFS code
as suggestions for additional savings
maps standard boot flags to corresponding RB_* values
use BOOT_FLAG() in port's MD code as appropriate
as discussed on tech-kern, add new boot flags -v, -q for booting
verbosely or quietly, and corresponding AB_VERBOSE/AB_QUIET
boot flags; also add FreeBSD-compatible bootverbose macro and
NetBSD-specific bootquiet macro
for hpcmips, use new bootverbose instead of it's own hpcmips_verbose
Tested on i386, and to limited extend (compile of affected files) also for
mvme68k, hp300, luna68k, sun3.
routine. Works similarly fto pmap_prefer(), but allows callers
to specify a minimum power-of-two alignment of the region.
How we ever got along without this for so long is beyond me.
in the non-MULTIPROCESSOR case (LOCKDEBUG requires it). Scheduler
lock is held upon entry to mi_switch() and cpu_switch(), and
cpu_switch() releases the lock before returning.
Largely from Bill Sommerfeld, with some minor bug fixes and
machine-dependent code hacking from me.
broken/fragile. Unlikely to be of much use, and confuses new users
when their system crashes when they, or their dhclient stumble over
it. See kern/10500, kern/8994 for the gory details.
* put #includes of opt headers and headers to get protos used by
net/netisr_dispatch.h in net/netisr.h (if !defined(_LOCORE)) (rather than
in netisr_dispatch.h itself, and potentially nowhere, respectively).
* require netisr.h to be included before netisr_dispatch.h.
* minor additional cleanup of both netisr.h and netisr_dispatch.h.
* clean up uses to remove now-unnecessary header file inclusions, and
local prototypes of the fns.
* convert netisr dispatch implementations which didn't use
netisr_dispatch.h (pc532) to use it.
<vm/pglist.h> -> <uvm/uvm_pglist.h>
<vm/vm_inherit.h> -> <uvm/uvm_inherit.h>
<vm/vm_kern.h> -> into <uvm/uvm_extern.h>
<vm/vm_object.h> -> nothing
<vm/vm_pager.h> -> into <uvm/uvm_pager.h>
also includes a bunch of <vm/vm_page.h> include removals (due to redudancy
with <vm/vm.h>), and a scattering of other similar headers.
"off_t" and the return value is a "paddr_t" to allow mappings
at offsets past 2^31 bytes. Somewhat inspired by FreeBSD, which
only changed the offset to a "vm_offset_t".
Includes updates for the i386, pc532 and sh3 mmmmap from Jason Thorpe.
- for bold characters, only blit the leftmost ftwidth pixels per character
cell row. The rightmost row which used to be printed would have been
overwritten formerly by the next character on sequential output, so no
visible change will result most of the time.
This fixes two problems:
* USE_C_BFOPS (which only works for 8 pixel wide fonts) blits the same
for bold characters now... it used to print the rightmost 8 pixel columns
of the bold-smeared characters
* we no longer need a reserved 1 pixel column at the right end of the screen.
That is, a 640x400 screen will hold 80x50 charactes with the 8x8 font.
doing a cpu_set_kpc(), just pass the entry point and argument all
the way down the fork path starting with fork1(). In order to
avoid special-casing the normal fork in every cpu_fork(), MI code
passes down child_return() and the child process pointer explicitly.
This fixes a race condition on multiprocessor systems; a CPU could
grab the newly created processes (which has been placed on a run queue)
before cpu_set_kpc() would be performed.
- Change ktrace interface to pass in the current process, rather than
p->p_tracep, since the various ktr* function need curproc anyway.
- Add curproc as a parameter to mi_switch() since all callers had it
handy anyway.
- Add a second proc argument for inferior() since callers all had
curproc handy.
Also, miscellaneous cleanups in ktrace:
- ktrace now always uses file-based, rather than vnode-based I/O
(simplifies, increases type safety); eliminate KTRFLAG_FD & KTRFAC_FD.
Do non-blocking I/O, and yield a finite number of times when receiving
EWOULDBLOCK before giving up.
- move code duplicated between sys_fktrace and sys_ktrace into ktrace_common.
- simplify interface to ktrwrite()
state into global and per-CPU scheduler state:
- Global state: sched_qs (run queues), sched_whichqs (bitmap
of non-empty run queues), sched_slpque (sleep queues).
NOTE: These may collectively move into a struct schedstate
at some point in the future.
- Per-CPU state, struct schedstate_percpu: spc_runtime
(time process on this CPU started running), spc_flags
(replaces struct proc's p_schedflags), and
spc_curpriority (usrpri of processes on this CPU).
- Every platform must now supply a struct cpu_info and
a curcpu() macro. Simplify existing cpu_info declarations
where appropriate.
- All references to per-CPU scheduler state now made through
curcpu(). NOTE: this will likely be adjusted in the future
after further changes to struct proc are made.
Tested on i386 and Alpha. Changes are mostly mechanical, but apologies
in advance if it doesn't compile on a particular platform.
which indicates that the process is actually running on a
processor. Test against SONPROC as appropriate rather than
combinations of SRUN and curproc. Update all context switch code
to properly set SONPROC when the process becomes the current
process on the CPU.
change these from bp->b_un.b_addr to bp->b_data, as well. This also
allows us more flexibility to experiment with other data buffer types
hung off of struct buf.
it to determine the boot device: mvme68k, pc532, macppc, ofppc. Those
platforms should be changed to use device_register(). In the mean time,
those ports defined __BROKEN_DK_ESTABLISH.
contains the values __SIMPLELOCK_LOCKED and __SIMPLELOCK_UNLOCKED, which
replace the old SIMPLELOCK_LOCKED and SIMPLELOCK_UNLOCKED. These files
are also required to supply inline functions __cpu_simple_lock(),
__cpu_simple_lock_try(), and __cpu_simple_unlock() if locking is to be
supported on that platform (i.e. if MULTIPROCESSOR is defined in the
_KERNEL case). Change these functions to take an int * (&alp->lock_data)
rather than the struct simplelock * itself.
These changes make it possible for userland to use the locking primitives
by including <machine/lock.h>.
as sizeof(struct device) when amiga switched to new config, and recent
additions of callout structures and a long missing struct device to the
soft structure resulted in kernel panics when attempting to open the builtin
serial port. The callout structure initialization was clearing the serial
port softc data! Fixed by using sizeof(struct par_softc).
* Remove the casts to vaddr_t from the round_page() and trunc_page() macros to
make them type-generic, which is necessary i.e. to operate on file offsets
without truncating them.
* In due course, cast pointer arguments to these macros to an appropriate
integral type (paddr_t, vaddr_t).
Originally done by Chuck Silvers, updated by myself.
timeout()/untimeout() API:
- Clients supply callout handle storage, thus eliminating problems of
resource allocation.
- Insertion and removal of callouts is constant time, important as
this facility is used quite a lot in the kernel.
The old timeout()/untimeout() API has been removed from the kernel.
so that the right entries get added to dev_name2blk[]. Needed for / on RAID.
(Whoops! I missed checking these in when adding the RAID_AUTOCONFIG stuff.)
on an A1200 yet. Configuration of wdc/atapi in GENERIC is currently
commented out to prevent the suprise of an IDE drive changing from sd0
to wd0 (and the first real SCSI drive changing from sd1/sd1 to sd0).
Note: enabling these will cause disk device renumbering if any IDE were
present (i.e. if sd0 was IDE drive 0, that drive will become wd0 and sd0
will be the first real SCSI drive.
Add a byte-swapping access_method array for use with MI wdc driver.
XXX Currently only read_multi_2 and write_multi_2 are used by MI wdc code;
XXX The other byte-swapping routines still need to be added.
This is not strictly necessary, as
- at least for the Ricoh chip in the A3000 and A4000, as those chips' Y10
registers happily continue to count up from 0xA if manually incremented
past 0x9.
- the Amiga ROMs and "setclock" commands seem to interpret 0xA 0x? like
200?, etc.
However,
- the Amiga setclock writes the modulo 10 value into the chips
- the chip docs of both chips, including the Y2K information of their
manufacturers, only refer to the range 0-9
- the chips increment from 9 to 0
So we better conform to this, to avoid unpleasant surprises.
"To fully support self-modifying code in any situation, it is imperative that
a CPUSHA intrcution is executed before the execution of the first self-modified
instruction. The CPUSHA instruction has the effect of ensuring that there is
no stale data iin memory, the pipeline is flushed, and instruction prefetches
are repeated and taken from external memory."
I verified that this is the only way (I can think of) to make the sigtramp
regression test work on 68040. doing cpushl dc; cinvl ic; over the affected
address range, then nop (to synchronize the pipeline) is not enough; apparently
the nop does not FLUSH the pipeline and prefetch...
Note that the 68060 UM has copied the above cited passage, but in fact this is
not true. This might be connected to the fact that the 68060 does ensure
memory access order under most conditions.
remove GENERIC.v6 file (as it is part of GENERIC now).
"faith" interface is commented out by default as it is not really for
general use.
IPsec items are commented out as well, though we can enable "options IPSEC"
without export-related issue ("options IPSEC" will enable authentication
portion only). We may need to think about it again.
if you have problem compiling with INET6 on archs I do not have access to,
please contact me.
XXX what to do with arch/arm32/SHARK{,.v6}?
This avoids a zero pointer dereference, which fixes PR 8571.
Make sbic_dmago() report selection timeouts to the upper layer.
This makes sbic really work again with 1.4L.
by saving the last written FIOSVIDEO/GRFIOCBLANK value into a shadow variable
in the grf_softc and returning this value on FBIOGVIDEO.
The presence of this ioctl is needed by screenblank(8) nowadays.
Original problem reported by Lars Hecking on the port-amiga mailing list.
that is priority is rasied. Add a new spllowersoftclock() to provide the
atomic drop-to-softclock semantics that the old splsoftclock() provided,
and update calls accordingly.
This fixes a problem with using the "rnd" pseudo-device from within
interrupt context to extract random data (e.g. from within the softnet
interrupt) where doing so would incorrectly unblock interrupts (causing
all sorts of lossage).
XXX 4 platforms do not have priority-raising capability: newsmips, sparc,
XXX sparc64, and VAX. This platforms still have this bug until their
XXX spl*() functions are fixed.
base of the Chipmem). With the new pmap_extract, we distinguish this from
an invalid kernel mapping. Don't confuse the reader with the old panic
message.
wiz