jhawk
d4091aa02e
Add support for on-the-fly switching of console devices interactively
...
from biosboot via the "consdev" command.
2000-05-13 05:31:00 +00:00
jhawk
a72e1e9c59
Add support for on-the-fly switching of console devices interactively
...
from the i386 biosboot via the "consdev" command.
2000-05-13 05:25:20 +00:00
jhawk
1dac4cd666
Add support for on-the-fly switching of console devices interactively
...
from biosboot via the "consdev" command.
Move "Press return" printf() out of print_banner() so we can
print_banner() reasonably after switching devices.
2000-05-13 05:23:37 +00:00
uch
62923b307e
fix #define RGB24(r, g, b)
2000-05-13 03:12:56 +00:00
thorpej
26f56b9cab
Only use __builtin_va_alist_t if using GCC 2.96 or later. Fixes
...
pkg/10080, from Matthias Scheler.
2000-05-12 23:49:11 +00:00
bouyer
9c43539f8f
The VIA Technologies VT82C686A SMBus Controller claims to be a PCI/ISA
...
bridge, ignore it. Should fix kern/10093 by Mark Dohring.
2000-05-12 20:31:22 +00:00
uch
f02836787f
fix CLUT index bug.
2000-05-12 18:09:55 +00:00
shin
e38d6212b9
make it compile again with '-Werror'.
2000-05-12 04:43:21 +00:00
jhawk
ed3acc8fbb
zsr has acquired a wi card
2000-05-12 03:14:21 +00:00
drochner
d5d280d015
-attach auxilary PCI buses at the 450NX chipset,
...
tested by hubertf in a small configuration (1 PXB - 2 PCI buses)
-being here, remove the per-VID/DID matching code which was commented
out for a while
2000-05-11 16:44:14 +00:00
jdolecek
8fedbd8497
Add i386-specific part of MicroChannel Architecture bus support, as
...
found in some older IBM PS/2 machines.
This code is based upon work by Scott D. Telford, with some minor bits
in arch/i386/mca/mca_machdep.c taken from FreeBSD.
XXX this is still very experimental and development version; use at your
XXX own risk
2000-05-11 16:38:10 +00:00
jdolecek
6c1643be43
minor adjustment for compiling with IBM_L40
2000-05-11 16:11:54 +00:00
jdolecek
98beeaa61d
add commented out CPPFLAGS+= -DIBM_L40 - needed for PS/2 bootblocks
2000-05-11 16:05:51 +00:00
jhawk
2d2ad4f3e8
fix cosmetic brain-oh in last; s/attachonly/matchonly/g
2000-05-11 15:26:23 +00:00
jhawk
a2606dbe80
Address PR#10042: instead of getting the dynamic configuration
...
all the time (which crashes some vaios), get the static configuration,
and if config_search() finds a node, then do the dynamic configuration.
This seems to work fine on multiple vaios (which seem to crash
in different places...go figure).
Also, bring prototypes in-line with KNF and declare static as appropriate.
"#if 0" out pnpbios_getapmtable() and pnpbios_setnode() as they
are not called.
Fix printf()s to print out dv_xname.
Fix a comment typo.
Use manifest constants (PNP_CF_DEVCONF_DYNAMIC, etc.) in calls to
pnpbios_getnode() instead of hardcoded constants.
2000-05-11 05:54:49 +00:00
uch
742429ff1e
#undef'ed debug routine.
2000-05-10 23:57:13 +00:00
msaitoh
a797322f08
supports single step!
2000-05-10 20:28:33 +00:00
is
8f17fca445
fix tyop
2000-05-10 20:20:21 +00:00
thorpej
c52b8eabae
Make stdarg/varargs work with GCC 2.96.
2000-05-10 17:53:45 +00:00
pk
bde258dc12
bus_dmamem_alloc: round-up `alignment' to a be a multiple of the page size.
2000-05-10 14:27:51 +00:00
pk
fbd2523c70
* Fix thinko in offset computations.
...
* Add DIAGNOSTIC checks.
2000-05-10 11:17:50 +00:00
nisimura
df234d8698
Take a straight way for pagemove() PTE manipulation, abandoning to
...
use MIPS_TBRPL(). When PTEs are modified, both src and dst TLBs
are invalidated. MIPS3 single TLB entry has paired double PTE
and pagemove() likely walks through multiple pages. The positive
effect of of MachTLBUpdate() or TBRPL() is unclear.
2000-05-10 08:55:22 +00:00
nisimura
bd91f6f2e0
Adapt mips_locoresw[].
2000-05-10 01:36:56 +00:00
nisimura
de13b44edd
Have mips_locoresw[] of 3 entry pointer array for different
...
implementation of locore routines between MIPS1 and MIPS3. It's
independent from mips_locore_jumpvec_t which is for cache/TLB
manipulating routines peculiar to processor designs. mips_locore_jumpvec_t
will be replaced with "processor closures" encapsulating implementation
parameters (cpuinfo) and pointers to conventaion routines (cpuops),
eventually.
2000-05-10 01:34:13 +00:00
pk
1bf775b965
Conform bus_dmamem_{alloc,map} usage to bus_dma(9) specs.
2000-05-09 22:42:08 +00:00
pk
2d12c9e33b
The bus_dma(9) implementation now allocates DVMA addresses in
...
bus_dmamap_load_*() routines only. Note that DMA memory buffers
allocated with bus_dmamem_alloc() _must_ be loaded by bus_dmamap_load_raw().
2000-05-09 22:39:35 +00:00
bjh21
6c97e2bd78
Initial commit of arm26 port
2000-05-09 21:55:44 +00:00
ragge
6a36c27519
Get boot device CSR from RPB instead of trying to guess it.
2000-05-09 20:53:51 +00:00
pk
6411be9c63
Include <sparc/sparc/asm.h>, per PR#10082
2000-05-09 20:29:28 +00:00
ragge
94faa6da32
Change copy*str() functions. More paranoid checking of legal address space.
...
Fixes PR#7838.
2000-05-09 18:59:58 +00:00
leo
eeecd4445a
The console stuff might also be needed by 'ser'. Also update the names of
...
the serial ports in the comments.
2000-05-09 14:30:47 +00:00
shin
a7dd7a7c0c
bugfix: make sure there is no valid data in data cache, when last
...
mapping to the physical page is removed (R3000/MIPS1).
delete cache operations in pmap_zero_page_uncached().
2000-05-09 13:40:13 +00:00
shin
8587b62f36
call uvm_pageidlezero() while CPU is idle.
2000-05-09 13:23:57 +00:00
shin
2d39542769
deal with INT_MASK_REAL_DEV removal.
2000-05-09 13:20:55 +00:00
shin
51994cb450
make it compile again (add #include's).
2000-05-09 13:19:54 +00:00
leo
793cd652e3
Add some {u}vm includes for the sake of PHOLD().
2000-05-09 10:29:01 +00:00
uch
86d1ce5fd8
fix WSDISPLAYIO_PUTCMAP return value.
2000-05-09 10:15:17 +00:00
nisimura
34a943161d
Introduce mips3_TBRPL(); not used in this moment, to be useful to
...
discard MachTLBUpdate() calls, however, the necessity of TLB entry
modification in such a way is under question because implementation
glitches on ASID management was straightened, those calls can be
sanely removed after all.
2000-05-09 09:50:17 +00:00
soda
88c52c7335
mention MIPS_INT_MASK_CLOCK and INT_MASK_REAL_DEV
2000-05-09 07:30:14 +00:00
soda
e06738f06f
back out previous changes as stopgap.
...
arc port still relies on MIPS_INT_MASK_CLOCK and INT_MASK_REAL_DEV.
(cpu_intr() of arc port should be rewritten completely, but not yet.)
2000-05-09 07:27:04 +00:00
hubertf
9f48bba3ae
Add "install" target, so "make install" after building the kernel
...
does something useful. The target can be redefined by putting a
install-kernel-${MACHINE_NAME} target that fits your needs into
/etc/mk.conf.
2000-05-09 00:56:21 +00:00
thorpej
6a33c86623
HAVE_GCC28 -> HAVE_EGCS, and make it match gcc 2.9 as well. Also,
...
make the use of -Wno-uninitialized explicit, don't rely on a compiler
hack to do it for us.
2000-05-09 00:32:19 +00:00
hubertf
30be57ab7b
Disable DDB_ONPANIC=0. A plain reboot in case of problems isn't really
...
helpful at install times, regarding diagnostics.
2000-05-09 00:28:22 +00:00
uch
7ae9f5b5e9
-G 24 -> -G 20. TX3922 kernel became bigger.
2000-05-08 21:58:40 +00:00
uch
cc01cd2448
implement 8bpp CLUT of Plum2, TX3912 video module.
2000-05-08 21:57:56 +00:00
uch
e5ee37ffd9
add struct hpcfb_accessops to setclut method. TX3912 can't change
...
color map index (R:G:B = 3:3:2), so use this.
2000-05-08 21:56:32 +00:00
ragge
57115228ef
Sorry, no KA680.
2000-05-08 19:46:12 +00:00
ragge
5fc118100e
Add 4000/200 and 4000/500.
2000-05-08 19:09:49 +00:00
ragge
7f9df86ca6
Get correct MAC address out of rom on VAX 4000/200. From Michael Kukat.
2000-05-08 18:51:17 +00:00
ragge
f511619a4f
Some more CPUs... From Michael Kukat.
2000-05-08 18:48:30 +00:00