./usr/X11R6/bin/inl
./usr/X11R6/bin/inw
./usr/X11R6/bin/ioport
./usr/X11R6/bin/outb
./usr/X11R6/bin/outl
./usr/X11R6/bin/outw
for x86_64, this should resolve recent issues w/ amd64 and these files
being installed but not in the set lists.
RAM a chance to boot. Discussed with soren@, tested on customer's board.
NB: While acceptable as a temporary workaround since most (all?) Cobalt
hardware comes with no less than 16Megs on board, changing a kernel load
address or making a boot loader relocatable could be a better solution.
Therefore, we need to cd to ${.CURDIR} before re-invoking ${MAKE} so
that it can find the Makefile.
Also, pass ${MFLAGS} to ${MAKE} so that we pick up the source tree's
makefile fragment, not the host system's fragments, so that this
works properly on older NetBSD host systems, as well in other
cross-compile contexts.
.rhosts file. This allows it to have a mode of 600
and still function correctly even when used on an NFS
client with uid 0 mapped to another (anonymous) UID.
Patch from Brian Ginsbach <ginsbach@cray.com>,
and fixes [bin/14880] from Darren Reed <darrenr@>.
tripping over this getting too large, and suffering other performance
problems due to the lack of good backpressure shrinking the bufcache
when other memory is required. Again, this tunable should be
revisited when the backpressure mechanism has been improved.
sysctl vm.bufcache can be used to manually tune those rare machines
that might need more than this.
See comments in rev 1.106 for more detail.
:M-[IDU]*
with
:C/-([IDU])[ ]*/-\1/Wg:M-[IDU]*
so that arguments with whitespace after them work correctly.
Resolves [toolchain/18248] from Andrew White at Motorola.
Be consisent in this syntax; previously we'd sometimes we'd just have :M-[ID]*
which would ignore -Ufoo ...
(This needs :C///W support in make(1) that Simon Gerraty added for me :)
Improve description of variable modifiers.
In the variable list, be more specific referring to "environment variables"
rather than just relying upon the formatting difference between .Ev and .Va.
default broken flags. groff 1.19 defaulted to this value off, whereas
groff 1.18.1 and earlier defaulted to this being on. Setting this value
fixes postscript printing to my HP LJ4m.
Note: BROKEN_SPOOLER_FLAGS was previously `7', so we were already enabling
workarounds for other issues...
unknown problem with dcache_inv_range by using a wbinv for now
(similarly for ARM10).
When setting the ARM9 system control register, use the computed
cpuctrlmask value (not 0xffffffff) so that the clocking-mode bits are
not reset to FastBus mode (which isn't very fast).
* Add resolution and depth variables to softc (for use in X driver, although
depth detection is currently problematic),
* Store more information about various chip revisions,
* Implement ioctls to help the X driver detect device presence and geometry.
