jmc
6d536163de
Change defaults for kernel compiles. Default all to USETOOLS?=no and have
...
the etc Makefile override that by putting USETOOLS into $.MAKEOVERRIDES
This way the default for kernel compiles is still to use the installed
toolchain instead of depending on $TOOLDIR. $TOOLDIR can be used by
simply adding USETOOLS=yes to the command line as usual.
Adjust each ports template to set the default no setting and also pull in
bsd.own.mk if they weren't already to ensure they'll build correctly
with the new toolchain setup.
2001-10-26 06:45:33 +00:00
thorpej
ba217c4196
Set MACHINE_ARCH explicitly in Makefiles for which it is constant.
...
Also, since config(8) now explcitly sets MACHINE, there is no need
to do it here in the Makefile.
2001-10-23 19:26:41 +00:00
thorpej
a2bf3bc31b
Pull in <bsd.own.mk> to get the correct toolchain definitions for
...
the USE_NEW_TOOLCHAIN case.
2001-10-23 17:32:35 +00:00
toshii
9665c1bcc3
Use arm/arm32/vm_machdep.c instead of hpcarm one.
2001-09-09 09:59:24 +00:00
matt
3c50edd8fb
Switch hpcarm to common arm32 conf.c ; (small changes to vm_machdep.c to
...
make it compile under ELF)
2001-09-03 19:38:13 +00:00
toshii
5424e08a49
Change the start address to load the kernel. We have 768k more free
...
memory now.
2001-08-02 14:45:40 +00:00
ichiro
e1eef3118a
add entry of Atmel microcontroller and uda1341 codec
2001-08-01 07:03:45 +00:00
toshii
9221ef3b13
Make hpcarm kernel build after arm/arm32 file move.
2001-07-29 15:21:33 +00:00
ichiro
834543dabc
ipaqlcd attach to ipaqbus
2001-07-10 18:10:46 +00:00
ichiro
50ac712dbc
add ipaqbus and ipaqpcic
2001-07-10 16:34:08 +00:00
abs
01b024cd5b
Standardise TCP_COMPAT_42 as commented out, grouped with other COMPAT options,
...
and with the comment '4.2BSD TCP/IP bug compat. Not recommended'
Add commented out 'TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG'
(All hail amiga and atari which make some attempt to automate the
multiplicity of config files...)
2001-07-08 16:32:12 +00:00
ichiro
a8696d3a73
Extended GPIO address is 0x49000000.
2001-07-08 03:33:42 +00:00
ichiro
66a6cc178d
pcmcia support of SA1110
2001-07-07 15:53:24 +00:00
ichiro
b1a5e525b8
mapping extended GPIOs
...
iPAQ: Extended GPIOs appears at address 0x41000000
2001-07-07 07:04:56 +00:00
ichiro
07a7db71f2
using bus_space_tag for salcd
2001-07-02 13:52:29 +00:00
toshii
8a0e9b17a0
Use ld -X instead of -x, to keep local symbols for DDB.
...
XXX does other arm ports need this change?
2001-06-29 02:38:32 +00:00
toshii
446833d1b1
Enable a bunch of PCMCIA network cards. They cannot be tested before
...
enabling.
2001-06-23 10:05:11 +00:00
toshii
c9b6aeb4f9
Add jornada720 keyboard device.
2001-06-23 09:28:59 +00:00
toshii
912e831053
Remove obsolete BOOTINFO_FB_* workaround.
2001-06-23 09:25:17 +00:00
toshii
b57d496dee
Add support for jornada720 keyboard and some LCD parameter controls.
...
The code is somewhat incomplete, but is quite functional.
2001-06-23 09:20:05 +00:00
bjh21
cb36bacea5
Merge arm32/dev/bus_space_notimpl.S and hpcarm/hpcarm/bus_space_notimpl.S
...
into arm/arm/bus_space_notimpl.S. They were identical anyway.
This file has no excuse for being in assembler, but I'll leave that for another
day.
2001-06-18 22:26:15 +00:00
toshii
07187f8a43
Nuke FRAMEBUF_HW_BASE. This value is provided by the bootloader.
2001-06-01 14:08:35 +00:00
toshii
76b3b49bb8
Add support for jornada720's framebuffer.
...
The functionality is almost same as bivideo, and hardware rasops and
power saving are not yet supported.
2001-06-01 02:51:03 +00:00
toshii
e2c5f5866f
Use sys/arch/arm/arm/blockio.S.
...
Actually, these functions aren't used by hpcarm but is necessary to be
able to link sys/arch/arm/mainbus thing.
2001-05-30 14:39:19 +00:00
mrg
3783ca5d30
define _KERNEL_OPT as well as _KERNEL. we will use this in the future to
...
get kernel "opt_foo.h" headers, rather than _KERNEL && !_LKM.
2001-05-29 02:20:20 +00:00
toshii
34691495bb
Add some PCMCIA devices.
2001-05-23 16:52:34 +00:00
toshii
3d513c3e7a
Implement generic soft interrupt for hpcarm.
2001-05-22 17:25:15 +00:00
bjh21
6d4648fa03
Move "defopt PMAP_DEBUG" into files.arm, since it's used by code in arch/arm.
2001-05-06 18:31:14 +00:00
bjh21
f9087c439b
Move cpufunc stuff from arm32/arm32 to arm/arm. The only change involved is
...
to add recognition of the SA-1100 and SA-1110 for compatibility with hpcarm
(which is now using this code as well).
2001-05-06 18:01:42 +00:00
toshii
fe9328ad71
Reorder so that basic devices attach first.
2001-03-31 13:49:44 +00:00
toshii
c08eec9f47
Use hpc/hpc/disksubr.c.
2001-03-14 14:47:40 +00:00
toshii
a9e9b871de
Add sacc, sacpcic, and sagpcic.
2001-03-10 19:05:40 +00:00
toshii
4c08e34e90
hpcarm/hpcarm/ast.c is no longer.
2001-03-10 14:10:51 +00:00
bjh21
83b8de43dd
Move undefined.c from sys/arch/{arm32/arm32,hpcarm/hpcarm} to sys/arch/arm/arm
...
in preparation for making it usable on arm26 as well.
2001-03-05 23:06:14 +00:00
matt
58438fb425
Move compat_13_machdep.c, strstr.c, copystr.S, bcopyinout.S, and
...
bcopy_page.S to arm/arm32 and remove port-local copies.
2001-03-04 08:25:38 +00:00
bjh21
4b483d7606
Move "options ARMFPE" to files.arm, so generic ARM files can use it.
2001-02-27 17:56:31 +00:00
bjh21
846fe69958
Remove CPU_* options (they're in files.arm now -- for some reason I missed
...
this lot in the last commit).
2001-02-25 18:28:27 +00:00
toshii
64d5dfd570
Use MI md_root.c.
2001-02-25 15:45:23 +00:00
reinoud
142f62c206
Moved the mainbus files to the arm/conf/file.arm from the arm32 and the
...
hpcarm/conf/files.hpcarm
2001-02-24 21:43:01 +00:00
reinoud
f583057770
Repaired a syntax fault in the files.[hpcarm,arm32]
2001-02-24 19:43:50 +00:00
reinoud
086a93939c
Part 2 of merge.... the dissapearance of mainbus from arm32 and hpcarm;
...
these parts were a 100% the same and i've included the extensions made by
hpcarm in the tree.
Checked for occurence of MD parts; none found.
2001-02-24 19:38:01 +00:00
toshii
ce7d8943e9
Use hardware address for saost.
2001-02-24 12:52:02 +00:00
ichiro
9eeb0264fd
change com-speed to 19200.
...
default com-speed of hpcboot are 19200
2001-02-24 11:08:31 +00:00
reinoud
c1f753f9b4
Big patch for merging common include files of the new hpcarm tree and the old arm32
...
tree into the new arm substree. All moved files are relinked with a stub that included
the file from the new location; this might be done better later.
2001-02-23 21:23:45 +00:00
ichiro
c98cd6c023
hpcarm:
...
kernel for StrongARM-based WinCE PDA machine.
2001-02-23 03:48:06 +00:00