Aren/NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
104,104 Commits 606 Branches 0 Tags 3.1 GiB
7fe8894787
Commit Graph

2923 Commits

Author SHA1 Message Date
soren
7fe8894787 Correct name of TI 802.11 chip. 2002-10-21 14:45:00 +00:00
grant
9c7cf018ff regen 2002-10-21 13:41:12 +00:00
grant
f6e8b6f584 add D-Link 520+ wireless ethernet. 2002-10-21 13:40:14 +00:00
soren
75a75e1d7a WI_PCI_CBMA belongs in dev/pci. 2002-10-21 11:57:25 +00:00
someya
66711e8f5f Bit shifts for interrupt channel exceeded u_int32_t width. 2002-10-20 01:06:10 +00:00
atatat
df90f09849 Don't print messages about pccbb_intr_disestablish() unless debugging 
is actually enabled.
 2002-10-19 18:01:59 +00:00
mjacob
ce9eb51cc5 Put in, sight unseen, changes which should enable 10160 support. 
Interestingly enough, Sun actually made a product out of the 10160,
which is a single channel variant of the 12160 (Ultra3) card.
 2002-10-18 23:26:15 +00:00
yamt
b4890b32a7 regen; fix simple typos 2002-10-18 00:59:11 +00:00
yamt
2e29ebca4d fix typos; "wiseman" is 82542, not 82452. 2002-10-18 00:56:16 +00:00
fair
8459c79958 Change the "dontcare" bits argument of ifmedia_init() to IFM_IMASK, 
so that PHY instance is not siginificant in ifmedia_match(). This
is done to support multiple PHYs on the MII. Without this change,
ifmedia_set() would panic the system when no PHYs were matched.

I ran into this on an AMD EasyNow PC, which is built around SiS
system chips with an embedded SiS 900 core, and an external AMD
Am79c901 PHY, which presents two PHYs on the MII: one for HomePNA,
and one for standard 10base-T. The 10base-T PHY ends up with instance
number 1...
 2002-10-17 01:17:30 +00:00
jdolecek
4f2f1a6fd4 match the joystick device on Creative SBLive! card; note this only works 
when emuxki(4) driver is compiled into the kernel, it has to enable
the joystick port
 2002-10-16 21:09:31 +00:00
kent
565a6b3384 Support for 4ch/6ch audio playback with VT8233/VT8235. 2002-10-16 15:27:28 +00:00
leo
8ad35e6ebd Regen. 2002-10-16 15:00:50 +00:00
leo
6a4a98f7a2 Add Fritz!PCI v2.0 ISDN Interface 2002-10-16 14:55:26 +00:00
wiz
0db3e0b3d6 Fix typo in comment. 2002-10-12 19:45:54 +00:00
someya
21249921f3 add autri_flags_codec() from OpenBSD, reported by grendel@zeitbombe.org 2002-10-12 08:42:21 +00:00
kent
3d86014c1c Kick auich_calibrate() by config_interrupts(). 
auichi_calibrate(): If the measured rate is less than 48k, use
48k.
 2002-10-11 04:11:28 +00:00
thorpej
b4d9be67e5 Fix up IPKDB_NE_PCI option dependencies: 
* IPKDB_NE_PCISLOT does not need any dependencies (it is merely a
  required parameter for IPKDB_NE_PCI).
* IPKDB_NE_PCI does should not have an option-dependency on IPKDB_NE_PCISLOT.
  While IPKDB_NE_PCISLOT is a required parameter, that is not how option-
  dependencies work, and we don't want IPKDB_NE_PCI to imply IPKDB_NE_PCISLOT,
  as that would cause a bogus value for IPKDB_NE_PCISLOT to be used.

Also, the IPKDB_NE_PCI selector should be lower-case; make it so.
 2002-10-11 00:57:59 +00:00
pooka
fec12d1505 make a few debug printf's match reality 2002-10-10 15:39:01 +00:00
jdolecek
d679e94c87 tlp_pci_vpc_21140_quirks(): make agnostic to signed/unsigned char; fixes 
compile on cats
 2002-10-09 16:59:19 +00:00
minoura
5139f048fb Add quirk for Connectix VirtualPC emulated 21140, just to print the name 
from the SROM.
 2002-10-08 15:09:54 +00:00
kent
54419c891c - Enable in-kernel sampling rate conversion for fixed-rate codec 
- Remove VRA/VRM enabling in auvia_attach()
- Use ac97_codec_if::set_rate()
- Return no AUDIO_PROPS_MMAP for fixed-rate codec
- Remove unused variables in auvia_softc
 2002-10-08 13:10:24 +00:00
kent
376a43fb3d auvia: 
- Add aurateconv
 - Update comment
 2002-10-08 13:09:18 +00:00
kent
d3307382f1 auich_set_params(): Don't return in the for loop. 2002-10-08 12:31:45 +00:00
kent
1adb5c1562 auich_softc: 
Remove sc_fixed_rate and sc_ac97rate.  ac97_softc has such
information.

auich_attach():
Remove VRA/VRM enabling code.  ac97_attach() does it.

auich_set_rate():
Use ac97_codec_if::set_rate().

auich_get_props():
Return no AUDIO_PROP_MMAP if the codec is fixed-rate.

auichreg.h:
Remove unnecessary ICH_PM_*.
 2002-10-08 10:25:45 +00:00
kent
e3b5b1897b Revive VIA8233_RP_DXS_[LR]VOL in auvia_trigger_*(). 2002-10-07 16:28:24 +00:00
kristerw
e367c94b9c Do not try to print uninitialized variable. 2002-10-06 23:34:56 +00:00
kent
bebbf91a39 - auvia_trigger_output(): correct register; 
AUVIA_RP_CONTROL -> AUVIA_RP_MODE
- auvia_trigger_output(), auvia_trigger_input(): Remove DXS_[LR]VOL setting.
- whitespace
 2002-10-06 23:14:25 +00:00
kent
f06ae93219 Add some constant symbols for AC97 registers and values based on OpenBSD. 
Rename some symbols to sync with OpenBSD:
	AC97_REG_EXTENDED_ID
	-> AC97_REG_EXT_AUDIO_ID
	AC97_REG_EXTENDED_STATUS
	-> AC97_REG_EXT_AUDIO_CTRL
	AC97_CODEC_DOES_VRA/AC97_ENAB_VRA
	-> AC97_EXT_AUDIO_VRA
	AC97_CODEC_DOES_MICVRA/AC97_ENAB_MICVRA
	-> AC97_EXT_AUDIO_VRM

ac97feature: "mic channel" -> "dedicated mic channel"
ac97_attach(): print extended capabilities; VRA, DRA, SPDIF, VRM, CDAC,
SDAC, LDAC.
 2002-10-06 16:33:35 +00:00
kent
550acc6c64 Add support for VIA VT8233/VT8235. The patch was provided by Ola Eriksson 
<ola at mreriksson dot net> in PR kern/18375.  It is based on auvia of
OpenBSD.
 2002-10-05 18:08:30 +00:00
kent
5636e4e770 Add support for VIA VT8235 2002-10-05 17:07:32 +00:00
kent
527d1dafae regen 2002-10-05 17:04:28 +00:00
kent
36f44886c1 - Broadcom BCM4401 
- VIA VT8235
 - Modify description of VT8233_AC97: "VT8233 AC-97 ..." -> "VT8233/VT8235 AC-97 ..."
 2002-10-05 17:01:50 +00:00
kent
839ec5d8cb Improve nForce MCP support. 
Submitted by: FUKAUMI Naoki <naoki at fukaumi dot org>
PR: kern/18524
 2002-10-04 14:33:30 +00:00
kent
c51dca5ba6 Remove a line added accidentally(?) at revision 1.21. 2002-10-02 17:08:10 +00:00
thorpej
b75a007d9f Add trailing ; to CFATTACH_DECL. 2002-10-02 16:51:16 +00:00
thorpej
9b2c2ec24d Add trailing ; to CFATTACH_DECL. 2002-10-02 16:50:59 +00:00
thorpej
434631fe62 Remove unnecessary extern decl of fpa_ca. 2002-10-02 02:16:36 +00:00
onoe
25c18040cf make it compilable with CBB_DEBUG. 2002-10-01 14:30:54 +00:00
haya
f7568c1e88 Use LIST in sys/queue. Add some comments. 2002-10-01 09:09:16 +00:00
thorpej
f59e5352f2 Use CFATTACH_DECL(). 2002-10-01 04:21:32 +00:00
thorpej
563cc48dad Remove uneecessary extern decl of de_ca. 2002-10-01 01:39:38 +00:00
thorpej
387fc6dc87 Use CFATTACH_DECL(). 2002-09-30 20:37:04 +00:00
onoe
2f8340c369 Nuke unneeded member sc_ifp and use #define sc_if instead, 
to prepare jumbo commit for wi.c
 2002-09-30 06:29:29 +00:00
scw
b9ca9c375c Before declaring pci_conf_interrupt(), check to see if it's 
already defined as a CPP macro, which is the case for SH5 at least.
 2002-09-28 10:31:02 +00:00
thorpej
f818766afe Declare all cfattach structures const. 2002-09-27 20:31:45 +00:00
provos
0f09ed48a5 remove trailing \n in panic(). approved perry. 2002-09-27 15:35:29 +00:00
itojun
1eb6ef2a80 don't go into D3 state if revision <= 82558_B0. PR 18011 2002-09-27 14:54:08 +00:00
thorpej
6c88de3b53 Introduce a new routine, config_match(), which invokes the 
cfattach->ca_match function in behalf of the caller.  Use it
rather than invoking cfattach->ca_match directly.
 2002-09-27 03:17:40 +00:00
thorpej
d1ad2ac4f2 Rather than referencing the cfdriver directly in the cfdata entries, 
instead use a string naming the driver.  The cfdriver is then looked
up in a list which is built at run-time.
 2002-09-27 02:24:06 +00:00